POWER NTS500-M Series Data Sheet 500 Watts Medical Total Power: 200 - 500 Watts Input Voltage: 85 - 264 Vac 120 - 300 Vdc # of Outputs: Single Special FeatureS ƒ Active power factor correction ƒ IEC EN61000-3-2 compliance ƒ Remote sense ƒ Power fail and remote inhibit ƒ Single wire current sharing ƒ Built-in EMI filter ƒ Low output ripple ƒ 5 V standby Electrical Specifications ƒ 12 V fan output Input ƒ Overvoltage protection Input ra nge 85 - 264 Vac (wide range) ƒ Overload protection ƒ Thermal overload protection Frequency 47 - 63 Hz ƒ DC power good Inrush current 50 A max., cold start @ 25 °C ƒ Built in OR-ing diode/FET Efficiency 85% typical at full load, nominal line ƒ Optional fan cover (-CF suffix) EMI filter FCC Class B conducted and radiated; CISPR22 Class B conducted ƒ Optional end fan cover (-CEF suffix) and radiated; EN55022 Class B conducted and radiated; ƒ PMBus compliant VDE0878PT3 Class B conducted and radiated. ƒ RoHS compliant Safety ground leakage < 0.3 mA @ 50/60 Hz, 264 Vac input ƒ Digital I2C interface current ƒ Two year warranty Output ƒ POE isolation on NTS508-M Maximum power 200 W for convection; 500 W with 30 CFM forced air Adjustment range ± 5% SaFety Standby output 5 V @ 1 A convection, 2 A forced air, regulated, ± 5% ƒ TUV: 60601-1 Fan output 12 V @ 1 A, -5 %, +7%, 0.5 A for -CF version ƒ cULus: 60601-1 Hold-up time 20 ms @ 500 W load, 115 VAC nominal line at factory voltage setting ƒ CB: Certificate & report Overload protection Short circuit protection on all outputs. Case overload protected @ ƒ CE: Mark (LVD) 115 - 130% above peak rating Overvoltage protection 20 - 35% above nominal output

NTS500-M Series Data Sheet Logic Control Power failure TTL logic signal goes high 100 - 500 msec after main output. It goes low at least 4 msec before loss of regulation Remote on/off Requires an external contact closure to inhibit outputs DC OK TTL logic goes high after the output is in regulation. It goes low when there is loss of regulation. Remote sense Compensates for 0.5 V lead drop min. Will operate without remote sense connected. Reverse connection protected. Environmental Specifications Operating temperature 0° to 50 °C ambient derate each output as 2.5% per degree from 50° to 70 °C. Storage temperature -40 °C to +85 °C Electromagnetic susceptibility Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3 Humidity Operating; non-condensing 10% to 90% RH Vibration Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 2 G peak 8 Hz to 500 Hz, operational Ordering Information Maximum Load Maximum Load Ripple Model Number Output Voltage Minimum Load with Convection with 30CFM Peak Load1 Regulation2 P/P (PARD)3 Cooling Forced Air NTS503-M 12 V 0 A 16.6 A 41.7 A 47 A ± 2% 120 mV NTS505-M 24 V 0 A 8.3 A 20.8 A 23.4 A ± 2% 240 mV NTS508-M 48 V 0 A 4.2 A 10.4 A 11.7 A ± 2% 480 mV 1. Peak current lasting < 30 seconds with a maximum 10% duty cycle. 2 . At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3 . Peak-to-peak with 20 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. 4. 12 V fan output cannot be used above 50 °C with convection cooling. 5. -CF suffix added to the model number indicates cover with top fan. -CEF suffix added to the model number indicates cover with end mounted fan cover and AC inlet 6. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users.

NTS500-M Series Data Sheet Pin Assignments Pin Assignments Adjustment Potentiometers Connector Connector P1 +V1 Output adjust CN1 PIN 1 Line CN403 PIN 1 5 V_I2C Mating Connectors PIN 3 Neutral PIN 2 Ground 1 5 SK4,5,6 Molex 19141-0058 PIN 5 Ground PIN 3 A2 SK7 Control Molex 90142-0010 SK7 PIN 1 V1 SWP 6 10 PIN 4 A0 1 5 signals PINS: 90119-2110 PIN 2 - Remote Sense PIN 5 SVCC2_OR Amp: 87977-3 PIN 3 + Remote Sense PIN 6 I2C_SDA 6 10 PINS: 87309-8 PIN 4 5VSB (standby) PIN 7 I2C_SLC *Landwin: 2580S1003 PIN 5 5VSB return PIN 8 A1 PINS: 2583T011R PIN 6 +12V PIN 9 N/C SK8 JST PHR-2 PIN 7 Common PIN 10 +12 V_RTN_CTRL Pins: SPH-002T-PO.5S PIN 8 Inhibit Notes: CN403 JST PHDR-10VS PIN 9 DC power good (DC OK) 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ± 0.2”. Pins: JST SPHD-002T-P0.5 L/P PIN 10 Power Fail (POK) SK8 PIN 1 +12 V Fan 3. Specifications are at factory settings *Landwin 2050 S1000 4. Mounting maximum insertion depth is 0.12”. Pins: 2053T011P PIN 2 Common 5. Warranty: 2 year 6. Weight: NTS50X-M - 1.66 lbs/0.75 kg * Where available NTS50X-M-CF - 2.00 lbs/0.9 kg Artesyn Connector Kit #70-841-024 includes NTS50X-M-CEF - 2.26 lbs/1.03 kg all of the above (Molex for SK7)

NTS500-M Series Data Sheet Mechanical Drawing

LPS100-M Series Data Sheet Mechanical Drawing - CEF option b a b a AIR FLOW DIRECTION 9.15" (232.3) 4.0"(101.6) 0.862"(21.9) 1.61"(40.9)1.255"(31.9)0.862"(21.9) ba a b 2.40" 5.85" (61) (148.6) 6.244" (158.6) a b a b 6.437"(63.5) a b a b 4.7" 0.752"(19.1) 2.9" (119.6) 5.5" (73.6) (139.7) #6-32 (8 places) M3 (8 places) WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 South Diablo Way Ground Floor Offices, Barberry House 14/F, Lu Plaza Suite B100 4 Harbour Buildings, Waterfront West 2 Wing Yip Street Tempe, AZ 85282, USA Brierley Hill, West Midlands Kwun Tong, Kowloon +1 888 412 7832 DY5 1LN, UK Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 Artesyn Embedded Technologies, Artesyn Embedded Power, Artesyn, and all Artesyn related logos are For more information: www.artesyn.com trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are For support: productsupport.ep@artesyn.com trade names, trademarks, or registered trademarks of their respective owners. Specifications are subject to change without notice. © 2019 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. NTS500-M DS 20Dec2019