NTCS0402E3.....T www.vishay.com Vishay BCcomponents SMD 0402, Glass Protected NTC Thermistors FEATURES • TCR ranging from -6.5 %/K at -40 °C to -2 %/K at 150 °C • Tolerance on R down to 1 % 25 • Suitable for wave or reflow soldering • NiSn terminations • Fully glass coated and protected • cUL recognized for safety applications  (file E148885) • AEC-Q200 qualified QUICK REFERENCE DATA • Material categorization: for definitions of compliance PARAMETER VALUE UNIT please see www.vishay.com/doc?99912 Resistance value at 25 °C 4.7K to 100K  APPLICATIONS • Temperature sensing, protection and compensation in Tolerance on R -value ± 1; ± 2; ± 3; ± 5 % 25 automotive, industrial, telecom and consumer applications. Examples are: B -value 3490 to 4075 K 25/85 - Battery chargers - Power suppliers Tolerance on B -value ± 3 % 25/85 - Office equipment - LCD compensation Maximum dissipation at 25 °C 70 mW - In-car entertainment Thermal time constant   5 s DESCRIPTION Dissipation factor D  2.0 mW/K Size 0402 (M1005) glass protected SMD chip thermistor with negative temperature coefficient (TCR) and tin (Sn) Operating temperature range  plated terminations. The device has no marking. -40 to +150 °C at zero power PACKAGING Weight  1.2 mg Available in 8 mm punched paper tape on reel package of 10 000 units. DESIGN-IN SUPPORT For complete curve computation, please visit: www.vishay.com/thermistors/curve-computation-list/ ELECTRICAL DATA AND ORDERING INFORMATION R R -TOL. B B -TOL. 25 25 25/85 25/85 SAP MATERIAL AND ORDERING NUMBER ... (1) () (± %) (K) (± %) 4700 3, 5 3595 3 NTCS0402E3472*MT 10 000 1, 2, 3, 5 3490 3 NTCS0402E3103*L1T (2) 10 000 3, 5 3950 3 NTCS0402E3103*HT 15 000 3, 5 3965 3 NTCS0402E3153*HT 22 000 3, 5 3590 3 NTCS0402E3223*MT 33 000 3, 5 3670 3 NTCS0402E3333*MT 47 000 1, 2, 3, 5 4075 3 NTCS0402E3473*XT 68 000 3, 5 3910 3 NTCS0402E3683*HT 100 000 1, 2, 3, 5 3950 3 NTCS0402E3104*HT Notes (1) Replace * in SAP by J for ± 5 %, H for ± 3 %, G for ± 2 %, F for ± 1 % tolerance on R 25 (2) The digit 1 at the end of this part number NTCS0402E3103*L1T differentiates it from the legacy P/N Revision: 13-Dec-2018 1 Document Number: 29003 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

NTCS0402E3.....T www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters L AND L L L W T 2 3 4 1 MIN. MIN. T W 1.0 ± 0.15 0.5 ± 0.15 0.5 ± 0.15 0.1 0.3 L2 L4 L3 L1 SOLDERING CONDITIONS This SMD thermistor is only suitable for wave or reflow soldering, in accordance with JEDEC® J-STD-020. The maximum temperature of 260 °C during 40 s should not be exceeded. Typical examples of a soldering processes that will provide reliable joints without damage, are shown below. Reflow Soldering Lead (Pb)-free Reflow Soldering Profile 300 10 s 40 s max. 300 260 °C 260 °C Temperature (°C) 22115050500000 ≈ 221141835500 °°°°CCCC 2 K/s 1400 s s Temperature (°C) 22110505500000 ≈≈2 321547 50° C°°CC 2m aKx/s.≈ 120 °C 20≈ s 6 m0 is6mnli m.aKxi/ts. normal 0 0 0 50 100 150 200 250 0 50 100 150 200 250 300 350 Time (s) Time (s) Recommended solder land pattern dimensions (mm) 0.5 0.5 1.5 PACKAGING TAPE SPECIFICATIONS All tape specifications are in accordance with IEC 60286-3. Basic dimensions are given below. Carrier tape material is paper. DIMENSIONS OF PAPER TAPE in millimeters T P PARAMETER DIMENSION 0 D0 P2 A0 (1) 0.65 ± 0.1 B (1) 1.15 ± 0.1 0 E 1 W 8.0 ± 0.2 E 1.75 ± 0.1 1 F W F 3.5 ± 0.05 B0 D0 1.55 ± 0.05 P (2) 4.0 ± 0.1 0 P 4.0 ± 0.1 1 A0 P2 2.0 ± 0.05 P1 JWB288 T1 T tape thickness max. 0.8 T cover tape thickness max. 0.1 1 Notes (1) Measured 0.3 mm above base pocket (2) P pitch cumulative error over any 10 pitches ± 0.2 mm 0 Revision: 13-Dec-2018 2 Document Number: 29003 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: V ishay: NTCS0402E3103JLT NTCS0402E3473JXT NTCS0402E3103FLT NTCS0402E3104FHT NTCS0402E3104JHT NTCS0402E3473FXT NTCS0402E3103HLT NTCS0402E3104HHT NTCS0402E3153HHT NTCS0402E3153JHT NTCS0402E3223HMT NTCS0402E3223JMT NTCS0402E3333HMT NTCS0402E3333JMT NTCS0402E3472HMT NTCS0402E3472JMT NTCS0402E3473HXT NTCS0402E3683HHT NTCS0402E3683JHT NTCS0402E3103JHT NTCS0402E3103HHT NTCS0402E3103FL1T NTCS0402E3103HL1T NTCS0402E3103JL1T