NSH CONNECTOR 1.0mm pitch/Disconnectable Crimp style connectors Specifications ––––––––––––––––––– • Current rating: 1.0 A AC, DC (AWG #28) • Voltage rating: 50 V AC, DC • Temperature range: -25˚C to +85˚C (including temperature rise in applying electrical current) • Contact resistance: Initial value/ 30 mΩmax. After environmental tests/ 50 mΩmax. • Insulation resistance: 100 MΩmin. 1.0mm pitch secure lock type connector. • Withstanding voltage: 500 VAC/minute This low insertion force type connector • Applicable wire: Conductor size/ AWG #32 to #28 realizes easier mating operation. The basic Insulation O.D./ 0.4 to 0.8 mm concept of the contact part of this connector *Refer to "General Instruction and Notice when using is equivalent to the performance proven Terminals and Connectors" at the end of thiscatalog. SHL connector. * Contact JST for details. *Compliant with RoHS. • Secure locking structure • Contact lock structure Standards –––––––––––––––––––––– • Prevention of contact deformation 0 • Clear engagement click sounds Recognized E60389 PC board layout and Assembly layout Top entry type Side entry type 0.6 ±0.1 1 ±0.1 A ±0.05 （4.4） 0.55 0.6 ±0.05 1 ±(cid:0)0.05 Circuit No.1 Connector outline 0.3 0.1 ± 0.8 （7.65） 8 0.1 ± 0.3 ±0.1 2.8 0.1 ± 3.9 0.1 ± 5.6 0.1 ± 7.8（） 2. 5.7 0.1 ± 7.4 0.1 ± 4.5 （） Connector outline 0.6 ±0.1 1± 0(cid:0).1 0.6 ±0.05 1 ±0.05 Circuit No.1 Note:1. The above figure is the figure viewed from the connector mounting side. A ±0.05 2. Tolerances are non-cumulative: ±0.05 mm for all centers. 3. The dimensions above should serve as a guideline. Contact JST for details. Contact Applicable wire Insulation O.D. Q´ty/ Model No. mm2 AWG# (mm) reel SSHL-003T- P0.2 0.032〜0.08 32〜28 0.4〜0.8 41,000 (cid:0) Material and Finish 4.75 2 Phosphor bronze, tin-plated (reflow treatment) 0.5 0.8 2.35 0.8 RoHS compliance 0.4 Crimping Applicator Contact machine Crimp applicator Dies Crimp applicator with dies MKS-L-10-3(cid:0) MK/SSH/L-003-02(cid:0)APLMK SSH/L003-02(cid:0) SSHL-003T-P0.2 AP-K2N *MKS-SC SC/SSH/L-003-02 APLSC SSH/L003-02 Note: *Strip-crimp applicator Contact JST for applicable wires in case that it is not usable due to wire size. 1

NSH CONNECTOR Housing Dimensions (mm) Q'ty/ <2 circuits> 4.2 Circuit No.1 mark Circuits Model No. A B bag 2 NSHR-02V-S *2.0 *5.0 3,000 3 NSHR-03V-S 2.0 5.0 3,000 4 NSHR-04V-S 3.0 6.0 2,500 6.2 5 NSHR-05V-S 4.0 7.0 2,000 6 NSHR-06V-S 5.0 8.0 1,500 7 NSHR-07V-S 6.0 9.0 1,500 8 NSHR-08V-S 7.0 10.0 1,500 A 9 NSHR-09V-S 8.0 11.0 1,000 B 10 NSHR-10V-S 9.0 12.0 1,000 11 NSHR-11V-S 10.0 13.0 1,000 12 NSHR-12V-S 11.0 14.0 1,000 13 NSHR-13V-S 12.0 15.0 1,000 14 NSHR-14V-S 13.0 16.0 1,000 15 NSHR-15V-S 14.0 17.0 1,000 <3 circuits> 4.2 Circuit No.1 mark Material PBT, UL94V-0, natural RoHS compliance Note: 2 circuits product is that the second pin of 3 circuits product is plugged 2 6. up. (Between circuits 2.0mm pitch) <For reference> As the color identification, the following alphabet shall be put in the underlined part. 1 For availability, delivery and minimum order quantity, contact JST. A ex. NSHR-02V-S- B S...natural Z...ivory TR...tomato red E...blue MG...moss green DH...dark gray LE...light blue K...black DPK...dark pink <4 to 9 circuits> 4.2 Circuit No.1 mark 2 6. 1 A B <10 to 15 circuits> 4.2 Circuit No.1 mark 2 6. 1 A B 2

NSH CONNECTOR Shrouded header Top entry type Side entry type <2 circuits> <3 circuits> <2 circuits> <3 circuits> B Circuit No.1 mark B Circuit No.1 mark B Circuit No.1 mark B Circuit No.1 mark A 4.4 A 4.4 A 4.4 0.55 A 4.4 0.55 1 1 6 6 6 6 0.8 0.8 <4 to 9 circuits> <4 to 9 circuits> B Circuit No.1 mark B Circuit No.1 mark A 4.4 0.55 A 1 4.4 1 6 6 <10 to 15 circuits> <10 to 15 circuits> 0.8 B Circuit No.1 mark B Circuit No.1 mark A 4.4 A 4.4 0.55 1 1 6 6 8 0. Top entry type Side entry type Dimensions (mm) Q'ty/ Dimensions (mm) Q'ty/ Circuits Model No. Circuits Model No. A B reel A B reel 2 BM02B-NSHSS-TBT *2.0 *5.0 1,000 2 SM02B-NSHSS-TB *2.0 *5.0 1,500 3 BM03B-NSHSS-TBT 2.0 5.0 1,000 3 SM03B-NSHSS-TB 2.0 5.0 1,500 4 BM04B-NSHSS-TBT 3.0 6.0 1,000 4 SM04B-NSHSS-TB 3.0 6.0 1,500 5 BM05B-NSHSS-TBT 4.0 7.0 1,000 5 SM05B-NSHSS-TB 4.0 7.0 1,500 6 BM06B-NSHSS-TBT 5.0 8.0 1,000 6 SM06B-NSHSS-TB 5.0 8.0 1,500 7 BM07B-NSHSS-TBT 6.0 9.0 1,000 7 SM07B-NSHSS-TB 6.0 9.0 1,500 8 BM08B-NSHSS-TBT 7.0 10.0 1,000 8 SM08B-NSHSS-TB 7.0 10.0 1,500 9 BM09B-NSHSS-TBT 8.0 11.0 1,000 9 SM09B-NSHSS-TB 8.0 11.0 1,500 10 BM10B-NSHSS-TBT 9.0 12.0 1,000 10 SM10B-NSHSS-TB 9.0 12.0 1,500 11 BM11B-NSHSS-TBT 10.0 13.0 1,000 11 SM11B-NSHSS-TB 10.0 13.0 1,500 12 BM12B-NSHSS-TBT 11.0 14.0 1,000 12 SM12B-NSHSS-TB 11.0 14.0 1,500 13 BM13B-NSHSS-TBT 12.0 15.0 1,000 13 SM13B-NSHSS-TB 12.0 15.0 1,500 14 BM14B-NSHSS-TBT 13.0 16.0 1,000 14 SM14B-NSHSS-TB 13.0 16.0 1,500 15 BM15B-NSHSS-TBT 14.0 17.0 1,000 15 SM15B-NSHSS-TB 14.0 17.0 1,500 Material and Finish Material and Finish Contact: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Contact: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: Polyamide, UL94V-0, natural Wafer: Polyamide, UL94V-0, natural Reinforcement: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Reinforcement: Copper alloy, copper-undercoated, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. RoHS compliance This product displays (LF)(SN) on a label. Note: 1.The products listed above are supplied on embossed-tape/with Note: 1.The products listed above are supplied on embossed-tape/without suction tape. suction tape. 2.2 circuits product is that the second pin of 3 circuits product is plugged 2.2 circuits product is that the second pin of 3 circuits product is plugged up. (Between circuits 2.0mm pitch) up. (Between circuits 2.0mm pitch) <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. BM02B-NSHSS-TBT SM02B-NSHSS-TB- S...natural Z...ivory TR...tomato red E...blue MG...moss green DH...dark gray LE...light blue K...black DPK...dark pink 3