Notice for TAIYO YUDEN Products [ For General Electronic Equipment ] Please read this notice before using the TAIYO YUDEN products. REMINDERS ■ Product information in this catalog is as of October 2018. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or use of our products. Please note that TAIYO YUDEN shall not be in any way responsible for any damages and defects in products or equipment incorporating our products, which are caused under the conditions other than those specified in this catalog or individual product specification sheets. ■ Please contact TAIYO YUDEN for further details of product specifications as the individual product specification sheets are available. ■ Please conduct validation and verification of our products in actual condition of mounting and operating environment before using our products. ■ The products listed in this catalog are intended for use in general electronic equipment (e.g., AV equipment, OA equipment, home electric appliances, office equipment, information and communication equipment including, without limitation, mobile phone, and PC) and medical equipment classified as Class I or II by IMDRF. Please be sure to contact TAIYO YUDEN for further information before using the products for any equipment which may directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation, automotive powertrain control system, train control system, and ship control system, traffic signal equipment, disaster prevention equipment, medical equipment classified as Class III by IMDRF, highly public information network equipment including, without limitation, telephone exchange, and base station). Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g., aerospace equipment, aviation equipment*, medical equipment classified as Class IV by IMDRF, nuclear control equipment, undersea equipment, military equipment). *Note: There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g., in-flight entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements specified separately by TAIYO YUDEN. Please be sure to contact TAIYO YUDEN for further information before using our products for such aviation equipment. When our products are used even for high safety and/or reliability-required devices or circuits of general electronic equipment, it is strongly recommended to perform a thorough safety evaluation prior to use of our products and to install a protection circuit as necessary. Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way responsible for any damages incurred by you or third parties arising from use of the products listed in this catalog for any equipment requiring inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN as described above. ■ Information contained in this catalog is intended to convey examples of typical performances and/or applications of our products and is not intended to make any warranty with respect to the intellectual property rights or any other related rights of TAIYO YUDEN or any third parties nor grant any license under such rights. ■ Please note that the scope of warranty for our products is limited to the delivered our products themselves and TAIYO YUDEN shall not be in any way responsible for any damages resulting from a fault or defect in our products. Notwithstanding the foregoing, if there is a written agreement (e.g., supply and purchase agreement, quality assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will warrant our products in accordance with such agreement. ■ The contents of this catalog are applicable to our products which are purchased from our sales offices or authorized distributors (hereinafter“ TAIYO YUDEN’s official sales channel”). Please note that the contents of this catalog are not applicable to our products purchased from any seller other than TAIYO YUDEN’s official sales channel. ■ Caution for Export Some of our products listed in this catalog may require specific procedures for export according to“ U.S. Export Administration Regulations”,“ Foreign Exchange and Foreign Trade Control Law” of Japan, and other applicable regulations. Should you have any questions on this matter, please contact our sales staff. 19

SMD POWER INDUCTORS(NR SERIES/NR SERIES H TYPE/S TYPE/V TYPE) SMD POWER INDUCTORS（NR SERIES/NR SERIES H TYPE/S TYPE/V TYPE） REFLOW REFLOW ■PARTS NUMBER * Operating Temp.：-25～+120℃（NRS40/50/60/80：-25～+125℃）（Including self-generated heat） N R △ 4 0 1 8 T △ 1 0 0 M △ △＝Blank space ① ② ③ ④ ⑤ ⑥ ①Series name ③Packaging Code Series name Code Packaging NR△ T△ Taping NRH Coating resin specification NRS ④Nominal inductance NRV Code IN （example） Nominal inductance［μH］ D ②Dimensions（L×W×H） 2R2 2.2 U Code Dimensions（L×W×H）［mm］ 100 10 C T 2010 2.0×2.0×1.0 101 100 O 2012 2.0×2.0×1.2 ※R＝Decimal point R 2410 2.4×2.4×1.0 S ／ 2412 2.4×2.4×1.2 ⑤Inductance tolerance P 3010 3.0×3.0×1.0 Code Inductance tolerance O 3012 3.0×3.0×1.2 M ±20％ W 3015 3.0×3.0×1.5 N ±30％ ER 4010 4.0×4.0×1.0 IN 4012 4.0×4.0×1.2 ⑥Internal code 4018 4.0×4.0×1.8 D U 5010 4.9×4.9×1.0 C 5012 4.9×4.9×1.2 T 5014 4.9×4.9×1.4 O 5020 4.9×4.9×2.0 R S 5024 4.9×4.9×2.4 5030 4.9×4.9×3.0 5040 4.9×4.9×4.0 6010 6.0×6.0×1.0 6012 6.0×6.0×1.2 6014 6.0×6.0×1.4 6020 6.0×6.0×2.0 6028 6.0×6.0×2.8 6045 6.0×6.0×4.5 8030 8.0×8.0×3.0 8040 8.0×8.0×4.0 i_smd_NR_e-E07R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 64 19

■STANDARD EXTERNAL DIMENSIONS / STANDARD QUANTITY Recommended Land Patterns L H B Type A B C NRV2010 0.65 1.35 2.0 e NRS2012, NRV2012 C NRH2410 0.7 1.45 2.0 W f NRH2412 NR 3010, NRH3010 NR 3012, NRH3012, NRV3012 0.8 2.2 2.7 e A A NR 3015, NRS3015 NR 4010, NRS4010 NR 4012, NRS4012 1.2 2.8 3.7 NR 4018, NRS4018 NRS8030 1.8 5.6 7.5 NR 8040, NRS8040 Unit：mm IN D Standard quantity Type L W H e f U ［pcs］ Taping C 2.0±0.1 2.0±0.1 1.0 max 0.5±0.2 1.25±0.2 T NRV2010 2500 O （0.079±0.004） （0.079±0.004） （0.039 max） （0.020±0.008） （0.050±0.008） R NRS2012 2.0±0.1 2.0±0.1 1.2 max 0.5±0.2 1.25±0.2 S 2500 ／ NRV2012 （0.079±0.004） （0.079±0.004） （0.047 max） （0.020±0.008） （0.050±0.008） 2.4±0.1 2.4±0.1 1.0 max 0.6±0.2 1.45±0.2 P NRH2410 2500 O （0.095±0.004） （0.095±0.004） （0.039 max） （0.024±0.008） （0.057±0.008） W 2.4±0.1 2.4±0.1 1.2 max 0.6±0.2 1.45±0.2 NRH2412 2500 E （0.095±0.004） （0.095±0.004） （0.047 max） （0.024±0.008） （0.057±0.008） R NR 3010 3.0±0.1 3.0±0.1 1.0 max 0.9±0.2 1.9±0.2 2000 IN NRH3010 （0.118±0.004） （0.118±0.004） （0.039 max） （0.035±0.008） （0.075±0.008） D NR 3012 U NRH3012 3.0±0.1 3.0±0.1 1.2 max 0.9±0.2 1.9±0.2 2000 C （0.118±0.004） （0.118±0.004） （0.047 max） （0.035±0.008） （0.075±0.008） T NRV3012 O NR 3015 3.0±0.1 3.0±0.1 1.5 max 0.9±0.2 1.9±0.2 R 2000 S NRS3015 （0.118±0.004） （0.118±0.004） （0.059 max） （0.035±0.008） （0.075±0.008） NR 4010 4.0±0.2 4.0±0.2 1.0 max 1.1±0.2 2.5±0.2 5000 NRS4010 （0.158±0.008） （0.158±0.008） （0.039 max） （0.043±0.008） （0.098±0.008） NR 4012 4.0±0.2 4.0±0.2 1.2 max 1.1±0.2 2.5±0.2 4500 NRS4012 （0.158±0.008） （0.158±0.008） （0.047 max） （0.043±0.008） （0.098±0.008） NR 4018 4.0±0.2 4.0±0.2 1.8 max 1.1±0.2 2.5±0.2 3500 NRS4018 （0.158±0.008） （0.158±0.008） （0.071 max） （0.043±0.008） （0.098±0.008） 8.0±0.2 8.0±0.2 3.0 max 1.60±0.3 5.6±0.3 NRS8030 1000 （0.315±0.008） （0.315±0.008） （0.118 max） （0.063±0.012） （0.22±0.012） *1） 4.2 max NR 8040 8.0±0.2 8.0±0.2 （0.165 max） 1.60±0.3 5.6±0.3 1000 NRS8040 （0.315±0.008） （0.315±0.008） *2） 4.0 max （0.063±0.012） （0.22±0.012） （0.158 max） *1）0R9～6R8 type, *2）100～221 type Unit：mm（inch） i_smd_NR_e-E07R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 19 65

Recommended Land Patterns L H ΔI B Type A B C NRS5010 e NRS5012 C NRS5014 W f NRS5020 1.5 3.6 4.0 NRS5024 NRS5030 e A A NR 5040, NRS5040 NRS6010 NR 6012, NRS6012 NRS6014 1.6 4.7 5.7 NR 6020, NRS6020 NR 6028, NRS6028 NR 6045, NRS6045 Unit：mm IN Standard quantity D Type L W H e f ΔI U ［pcs］ Taping C 4.9±0.2 4.9±0.2 1.0 max 1.2±0.2 3.3±0.2 1.3typ NRS5010 1000 T （0.193±0.008） （0.193±0.008） （0.039 max） （0.047±0.008） （0.130±0.008） （0.051typ） O 4.9±0.2 4.9±0.2 1.2 max 1.2±0.2 3.3±0.2 1.3typ R NRS5012 1000 S （0.193±0.008） （0.193±0.008） （0.047 max） （0.047±0.008） （0.130±0.008） （0.051typ） ／ 4.9±0.2 4.9±0.2 1.4 max 1.2±0.2 3.3±0.2 1.3typ P NRS5014 （0.193±0.008） （0.193±0.008） （0.055 max） （0.047±0.008） （0.130±0.008） （0.051typ） 1000 O 4.9±0.2 4.9±0.2 2.0 max 1.2±0.2 3.3±0.2 1.3typ W NRS5020 800 （0.193±0.008） （0.193±0.008） （0.079 max） （0.047±0.008） （0.130±0.008） （0.051typ） E R *3） 2.5 max IN NRS5024 4.9±0.2 4.9±0.2 （0.098 max） 1.2±0.2 3.3±0.2 1.3typ 2500 （0.193±0.008） （0.193±0.008） *4） 2.4 max （0.047±0.008） （0.130±0.008） （0.051typ） D U （0.095 max） C *5） 3.1 max T 4.9±0.2 4.9±0.2 （0.122 max） 1.2±0.2 3.3±0.2 1.3typ O NRS5030 500 （0.193±0.008） （0.193±0.008） *6） 3.0 max （0.047±0.008） （0.130±0.008） （0.051typ） R S （0.118 max） *7） 4.1 max NR 5040 4.9±0.2 4.9±0.2 （0.161 max） 1.2±0.2 3.3±0.2 1.3typ 1500 NRS5040 （0.193±0.008） （0.193±0.008） *8） 4.0 max （0.047±0.008） （0.130±0.008） （0.051typ） （0.158 max） 6.0±0.2 6.0±0.2 1.0 max 1.35±0.2 4.0±0.2 2.3typ NRS6010 1000 （0.236±0.008） （0.236±0.008） （0.039 max） （0.053±0.008） （0.158±0.008） （0.091typ） NR 6012 6.0±0.2 6.0±0.2 1.2 max 1.35±0.2 4.0±0.2 2.3typ 1000 NRS6012 （0.236±0.008） （0.236±0.008） （0.047 max） （0.053±0.008） （0.158±0.008） （0.091typ） 6.0±0.2 6.0±0.2 1.4 max 1.35±0.2 4.0±0.2 2.3typ NRS6014 1000 （0.236±0.008） （0.236±0.008） （0.055 max） （0.053±0.008） （0.158±0.008） （0.091typ） NR 6020 6.0±0.2 6.0±0.2 2.0 max 1.35±0.2 4.0±0.2 2.3typ 2500 NRS6020 （0.236±0.008） （0.236±0.008） （0.079 max） （0.053±0.008） （0.158±0.008） （0.091typ） NR 6028 6.0±0.2 6.0±0.2 2.8 max 1.35±0.2 4.0±0.2 2.3typ 2000 NRS6028 （0.236±0.008） （0.236±0.008） （0.110 max） （0.053±0.008） （0.158±0.008） （0.091typ） NR 6045 6.0±0.2 6.0±0.2 4.5 max 1.35±0.2 4.0±0.2 2.3typ 1500 NRS6045 （0.236±0.008） （0.236±0.008） （0.177 max） （0.053±0.008） （0.158±0.008） （0.091typ） *3）1R0～1R5 type, *4）2R2～330 type Unit：mm（inch） *5）R47～100 type, *6）150～470 type *7）1R5～100 type, *8）150～470 type i_smd_NR_e-E07R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 66 19

■PARTS NUMBER ●NRS2012 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±20％） frequency［kHz］ ［MHｚ］（min.） Max. Typ. Max. Typ. NRS2012T 1R0N GJ RoHS 1.0 ±30％ － 0.070 1,900 2,050 1,700 1,850 100 NRS2012T 1R5N GJ RoHS 1.5 ±30％ － 0.090 1,650 1,800 1,500 1,650 100 NRS2012T 2R2M GJ RoHS 2.2 ±20％ － 0.107 1,350 1,500 1,370 1,500 100 NRS2012T 3R3M GJ RoHS 3.3 ±20％ － 0.190 1,000 1,150 1,020 1,100 100 NRS2012T 4R7M GJ RoHS 4.7 ±20％ － 0.241 900 1,050 910 1,000 100 ●NRV2010 type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±20％） frequency［kHz］ ［MHｚ］（min.） Max. Typ. Max. Typ. NRV2010T R47N GF RoHS 0.47 ±30％ － 0.052 2,100 2,250 2,000 2,300 100 NRV2010T R68N GF RoHS 0.68 ±30％ － 0.060 1,850 2,000 1,850 2,100 100 NRV2010T 1R0N GF RoHS 1.0 ±30％ － 0.080 1,550 1,700 1,600 1,850 100 NRV2010T 1R5M GF RoHS 1.5 ±20％ － 0.100 1,350 1,450 1,450 1,650 100 NRV2010T 2R2M GF RoHS 2.2 ±20％ － 0.175 1,100 1,200 1,100 1,200 100 NRV2010T 3R3M GF RoHS 3.3 ±20％ － 0.250 880 950 1,000 1,100 100 NRV2010T 4R7M GF RoHS 4.7 ±20％ － 0.320 760 810 820 930 100 IN D ●NRV2012 type U Self-resonant Rated current　※）　［ｍA］ C Parts number EHS Nominal inductance Inductance tolerance frequency DC Resistance Saturation current: Idc1 Temperature rise current: Idc2 Measuring T ［μH］ ［MHｚ］（min.） ［Ω］（±20％） Max. Typ. Max. Typ. frequency［kHz］ O NRV2012T 1R0N GF RoHS 1.0 ±30％ － 0.073 2,200 2,350 1,650 1,830 100 R NRV2012T 1R5N GF RoHS 1.5 ±30％ － 0.100 1,800 1,950 1,400 1,550 100 S／ NRV2012T 2R2M GF RoHS 2.2 ±20％ － 0.129 1,600 1,700 1,200 1,350 100 P NRV2012T 3R3M GF RoHS 3.3 ±20％ － 0.227 1,250 1,350 900 1,040 100 O NRV2012T 4R7M GF RoHS 4.7 ±20％ － 0.325 1,100 1,150 750 850 100 W ●NRH2410 Shielded type E Parts number EHS Nomina［lμ inHdu］ctance Inductance tolerance Seflrfe-qreuseonncaynt D［ΩC ］R（e±sis2t0a％nc）e Saturation currReantte: dId ccu1rreTnte　m※pe）r　at［uｍreA r］ise current: Idc2 freqMueeanscuyr［inkgHz］ R IN ［MHｚ］（min.） Max. Typ. Max. Typ. D NRH2410T R68NN 4 RoHS 0.68 ±30％ 120 0.060 2,200 2,300 1,570 1,810 100 U NRH2410T 1R0NN 4 RoHS 1.0 ±30％ 106 0.070 1,800 1,950 1,410 1,640 100 C NRH2410T 1R5MN RoHS 1.5 ±20％ 94 0.110 1,550 1,640 1,160 1,320 100 T NRH2410T 2R2MN RoHS 2.2 ±20％ 77 0.150 1,290 1,340 970 1,110 100 O NRH2410T 3R3MN RoHS 3.3 ±20％ 56 0.220 1,000 1,140 770 890 100 R NRH2410T 4R7MN RoHS 4.7 ±20％ 50 0.290 880 930 670 780 100 S NRH2410T 6R8MN RoHS 6.8 ±20％ 43 0.410 750 765 570 650 100 NRH2410T 100MN RoHS 10 ±20％ 32 0.690 550 605 450 520 100 NRH2410T 150MN RoHS 15 ±20％ 27 1.02 470 520 370 430 100 NRH2410T 220MN RoHS 22 ±20％ 22 1.47 390 405 300 340 100 ●NRH2412 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS ［μH］ Inductance tolerance frequency ［Ω］（±20％） Saturation current: Idc1 Temperature rise current: Idc2 frequency［kHz］ ［MHｚ］（min.） Max. Typ. Max. Typ. NRH2412T R47NNGJ RoHS 0.47 ±30％ 180 0.050 2,900 3,690 2,100 2,300 100 NRH2412T 1R0NNGH RoHS 1.0 ±30％ 101 0.077 2,350 2,610 1,300 1,540 100 NRH2412T 1R5NNGH RoHS 1.5 ±30％ 89 0.100 2,100 2,290 1,150 1,390 100 NRH2412T 2R2MNGH RoHS 2.2 ±20％ 72 0.140 1,700 1,940 1,000 1,190 100 NRH2412T 3R3MNGH RoHS 3.3 ±20％ 56 0.225 1,400 1,600 750 890 100 NRH2412T 4R7MNGH RoHS 4.7 ±20％ 45 0.300 1,150 1,280 650 770 100 NRH2412T 6R8MNGH RoHS 6.8 ±20％ 34 0.420 950 1,100 550 635 100 NRH2412T 100MNGH RoHS 10 ±20％ 29 0.600 810 900 450 510 100 ●NRH3010 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±20％） frequency［kHz］ ［MHｚ］（min.） Max. Typ. Max. Typ. NRH3010T 1R2NN RoHS 1.2 ±30％ 120 0.065 1,700 1,740 1,480 1,850 100 NRH3010T 1R5NN RoHS 1.5 ±30％ 99 0.075 1,440 1,500 1,370 1,680 100 NRH3010T 2R2MN RoHS 2.2 ±20％ 86 0.083 1,300 1,400 1,300 1,550 100 NRH3010T 3R3MN RoHS 3.3 ±20％ 64 0.130 1,000 1,020 1,030 1,220 100 NRH3010T 4R7MN RoHS 4.7 ±20％ 50 0.170 850 930 900 1,090 100 NRH3010T 6R8MN RoHS 6.8 ±20％ 44 0.250 700 750 745 920 100 NRH3010T 100MN RoHS 10 ±20％ 34 0.350 600 650 620 780 100 NRH3010T 150MN RoHS 15 ±20％ 25 0.550 450 520 480 600 100 NRH3010T 220MN RoHS 22 ±20％ 22 0.770 380 440 410 510 100 NRH3010T 470MN RoHS 47 ±20％ 17 2.050 250 300 285 320 100 ※） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)  ※） The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃) ※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. i_smd_NR_e-E07R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 19 67

■PARTS NUMBER ●NRH3012 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±20％） frequency［kHz］ ［MHｚ］（min.） Max. Typ. Max. Typ. NRH3012T R47NN RoHS 0.47 ±30％ 160 0.033 2,600 3,200 1,900 2,280 100 NRH3012T 1R0NN RoHS 1.0 ±30％ 111 0.048 2,200 2,500 1,710 1,970 100 NRH3012T 1R5NN RoHS 1.5 ±30％ 95 0.055 1,700 1,900 1,600 1,750 100 NRH3012T 2R2MN RoHS 2.2 ±20％ 78 0.075 1,500 1,750 1,370 1,600 100 NRH3012T 3R3MN RoHS 3.3 ±20％ 61 0.100 1,200 1,500 1,210 1,480 100 NRH3012T 4R7MN RoHS 4.7 ±20％ 50 0.130 1,000 1,200 1,060 1,280 100 NRH3012T 6R8MN RoHS 6.8 ±20％ 43 0.190 850 910 890 1,000 100 NRH3012T 100MN RoHS 10 ±20％ 32 0.270 730 780 720 850 100 NRH3012T 150MN RoHS 15 ±20％ 26 0.450 530 650 570 680 100 NRH3012T 220MN RoHS 22 ±20％ 22 0.630 500 550 500 590 100 ●NRV3012 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±20％） frequency［kHz］ ［MHｚ］（min.） Max. Typ. Max. Typ. NRV3012T 1R0N RoHS 1.0 ±30％ 110 0.065 2,500 3,000 1,600 1,970 100 IN NRV3012T 1R5N RoHS 1.5 ±30％ 92 0.075 2,100 2,500 1,400 1,610 100 D NRV3012T 2R2M RoHS 2.2 ±20％ 70 0.120 1,800 2,100 1,100 1,330 100 U NRV3012T 3R3M RoHS 3.3 ±20％ 55 0.150 1,600 1,900 1,000 1,260 100 C NRV3012T 4R7M RoHS 4.7 ±20％ 48 0.190 1,250 1,500 850 1,040 100 T NRV3012T 6R8M RoHS 6.8 ±20％ 40 0.300 950 1,200 650 800 100 O NRV3012T 100M RoHS 10 ±20％ 32 0.470 800 990 550 640 100 R S ／ ●NRS3015 Shielded type Self-resonant Rated current　※）　［ｍA］ P Nominal inductance DC Resistance Measuring O Parts number EHS ［μH］ Inductance tolerance frequency ［Ω］（±20％） Saturation current: Idc1 Temperature rise current: Idc2 frequency［kHz］ ［MHｚ］（min.） Max. Typ. Max. Typ. W NRS3015T 1R0NNGH RoHS 1.0 ±30％ 100 0.030 2,100 2,400 2,100 2,350 100 E NRS3015T 1R5NNGH RoHS 1.5 ±30％ 87 0.038 1,800 2,100 1,820 2,100 100 R NRS3015T 2R2MNGH RoHS 2.2 ±20％ 64 0.058 1,480 1,700 1,500 1,800 100 IN NRS3015T 3R3MNGH RoHS 3.3 ±20％ 49 0.078 1,210 1,400 1,230 1,500 100 D NRS3015T 4R7MNGH RoHS 4.7 ±20％ 40 0.120 1,020 1,100 1,040 1,300 100 U NRS3015T 6R8MNGH RoHS 6.8 ±20％ 36 0.160 870 920 880 1,100 100 C NRS3015T 100MNGH RoHS 10 ±20％ 28 0.220 700 750 710 840 100 T NRS3015T 150MNGH RoHS 15 ±20％ 23 0.325 580 680 680 760 100 O NRS3015T 220MNGH RoHS 22 ±20％ 20 0.520 470 540 470 530 100 R NRS3015T 330MNGH RoHS 33 ±20％ 18 0.780 400 440 440 490 100 S NRS3015T 470MNGH RoHS 47 ±20％ 17 1.100 325 380 350 380 100 ●NRS4010 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±20％） frequency［kHz］ ［MHｚ］（min.） Max. Typ. Max. Typ. NRS4010T 1R0NDGG RoHS 1.0 ±30％ 116 0.056 2,000 2,280 1,900 2,390 100 NRS4010T 2R2MDGG RoHS 2.2 ±20％ 73 0.085 1,200 1,610 1,500 1,800 100 NRS4010T 3R3MDGG RoHS 3.3 ±20％ 58 0.100 1,100 1,300 1,400 1,700 100 NRS4010T 4R7MDGG RoHS 4.7 ±20％ 47 0.140 950 1,100 1,200 1,450 100 NRS4010T 6R8MDGG RoHS 6.8 ±20％ 38 0.200 800 890 1,000 1,200 100 NRS4010T 100MDGG RoHS 10 ±20％ 31 0.300 620 760 750 860 100 NRS4010T 150MDGG RoHS 15 ±20％ 24 0.430 540 635 600 700 100 NRS4010T 220MDGG RoHS 22 ±20％ 19 0.570 450 540 500 600 100 NRS4010T 330MDGG RoHS 33 ±20％ 15 0.900 350 440 400 460 100 NRS4010T 470MDGG RoHS 47 ±20％ 13 1.250 300 350 350 370 100 ●NRS4012 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±20％） frequency［kHz］ ［MHｚ］（min.） Max. Typ. Max. Typ. NRS4012T 1R0NDGG RoHS 1.0 ±30％ 100 0.042 2,800 2,900 2,200 2,670 100 NRS4012T 1R5NDGG RoHS 1.5 ±30％ 90 0.051 2,300 2,500 2,000 2,430 100 NRS4012T 2R2MDGJ RoHS 2.2 ±20％ 70 0.060 1,650 1,950 1,900 2,100 100 NRS4012T 3R3MDGJ RoHS 3.3 ±20％ 60 0.070 1,400 1,700 1,700 1,880 100 NRS4012T 4R7MDGJ RoHS 4.7 ±20％ 45 0.095 1,200 1,320 1,500 1,570 100 NRS4012T 6R8MDGJ RoHS 6.8 ±20％ 35 0.125 900 1,170 1,300 1,400 100 NRS4012T 100MDGJ RoHS 10 ±20％ 30 0.170 800 990 1,100 1,200 100 NRS4012T 150MDGJ RoHS 15 ±20％ 24 0.260 650 820 750 840 100 NRS4012T 220MDGJ RoHS 22 ±20％ 18 0.400 500 620 620 650 100 NRS4012T 330MDGJ RoHS 33 ±20％ 15 0.600 400 500 480 530 100 NRS4012T 470MDGJ RoHS 47 ±20％ 12 0.770 350 430 420 470 100 ※） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)  ※） The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃) ※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. i_smd_NR_e-E07R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 68 19

■PARTS NUMBER ●NRS4018 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±20％） frequency［kHz］ ［MHｚ］（min.） Max. Typ. Max. Typ. NRS4018T 1R0NDGJ RoHS 1.0 ±30％ 90 0.027 4,000 4,590 3,200 3,720 100 NRS4018T 1R5NDGJ RoHS 1.5 ±30％ 75 0.037 3,300 3,750 2,400 3,000 100 NRS4018T 2R2MDGJ RoHS 2.2 ±20％ 60 0.042 3,000 3,110 2,200 2,590 100 NRS4018T 3R3MDGJ RoHS 3.3 ±20％ 45 0.055 2,300 2,560 2,000 2,240 100 NRS4018T 4R7MDGJ RoHS 4.7 ±20％ 35 0.070 2,000 2,330 1,700 1,880 100 NRS4018T 6R8MDGJ RoHS 6.8 ±20％ 30 0.098 1,600 1,820 1,450 1,690 100 NRS4018T 100MDGJ RoHS 10 ±20％ 25 0.150 1,300 1,440 1,200 1,250 100 NRS4018T 150MDGJ RoHS 15 ±20％ 18 0.210 1,100 1,150 850 915 100 NRS4018T 220MDGJ RoHS 22 ±20％ 15 0.290 900 920 720 810 100 NRS4018T 330MDGJ RoHS 33 ±20％ 12 0.460 700 830 550 630 100 NRS4018T 470MDGJ RoHS 47 ±20％ 10 0.650 600 700 440 520 100 NRS4018T 680MDGJ RoHS 68 ±20％ 8.3 1.00 520 600 320 400 100 NRS4018T 101MDGJ RoHS 100 ±20％ 6.5 1.45 420 490 280 330 100 NRS4018T 151MDGJ RoHS 150 ±20％ 5.5 2.30 340 390 220 280 100 NRS4018T 221MDGJ RoHS 220 ±20％ 4.0 3.80 275 310 170 210 100 ●NRS5010 type IN Self-resonant Rated current　※）　［ｍA］ D Parts number EHS Nominal inductance Inductance tolerance frequency DC Resistance Saturation current: Idc1 Temperature rise current: Idc2 Measuring U ［μH］ ［Ω］（±20％） frequency［kHz］ ［MHｚ］（min.） Max. Typ. Max. Typ. C NRS5010T 1R0NMGF RoHS 1.0 ±30％ 95 0.070 2,350 2,510 1,750 2,000 100 T NRS5010T 2R2NMGF RoHS 2.2 ±30％ 65 0.105 1,500 1,710 1,400 1,600 100 O NRS5010T 3R3MMGF RoHS 3.3 ±20％ 42 0.125 1,400 1,530 1,250 1,520 100 R S NRS5010T 4R7MMGF RoHS 4.7 ±20％ 37 0.145 1,200 1,340 1,150 1,390 100 ／ NRS5010T 6R8MMGF RoHS 6.8 ±20％ 33 0.185 1,000 1,120 1,000 1,210 100 P NRS5010T 100MMGF RoHS 10 ±20％ 23 0.250 850 970 900 950 100 O NRS5010T 150MMGF RoHS 15 ±20％ 19 0.400 680 740 650 700 100 W NRS5010T 220MMGF RoHS 22 ±20％ 15 0.600 550 620 450 560 100 E ●NRS5012 type R Nominal inductance Self-resonant DC Resistance Rated current　※）　［ｍA］ Measuring IN Parts number EHS ［μH］ Inductance tolerance frequency ［Ω］（±20％） Saturation current: Idc1 Temperature rise current: Idc2 frequency［kHz］ D ［MHｚ］（min.） Max. Typ. Max. Typ. U NRS5012T 1R0NMGF RoHS 1.0 ±30％ 100 0.053 4,500 4,670 2,300 2,750 100 C NRS5012T 1R5NMGF RoHS 1.5 ±30％ 86 0.070 3,800 3,970 2,200 2,470 100 T NRS5012T 2R2MMGF RoHS 2.2 ±20％ 70 0.085 3,100 3,510 2,000 2,300 100 O NRS5012T 3R3MMGF RoHS 3.3 ±20％ 48 0.160 2,400 2,580 1,450 1,650 100 R NRS5012T 4R7MMGF RoHS 4.7 ±20％ 40 0.180 2,200 2,320 1,400 1,560 100 S NRS5012T 6R8MMGF RoHS 6.8 ±20％ 36 0.260 1,700 1,950 1,100 1,260 100 NRS5012T 100MMGF RoHS 10 ±20％ 26 0.420 1,400 1,550 850 1,000 100 NRS5012T 150MMGF RoHS 15 ±20％ 22 0.670 1,200 1,240 640 740 100 ●NRS5014 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±20％） frequency［kHz］ ［MHｚ］（min.） Max. Typ. Max. Typ. NRS5014T R47NMGG RoHS 0.47 ±30％ 185 0.025 5,800 6,400 3,300 3,470 100 NRS5014T 1R2NMGG RoHS 1.2 ±30％ 86 0.045 3,800 4,200 2,400 3,000 100 NRS5014T 2R2NMGG RoHS 2.2 ±30％ 56 0.065 2,800 3,100 2,000 2,400 100 NRS5014T 3R3NMGG RoHS 3.3 ±30％ 48 0.080 2,350 2,650 1,700 2,200 100 NRS5014T 4R7NMGG RoHS 4.7 ±30％ 41 0.100 2,050 2,400 1,400 1,900 100 NRS5014T 6R8MMGG RoHS 6.8 ±20％ 33 0.150 1,600 1,850 1,200 1,450 100 NRS5014T 100MMGG RoHS 10 ±20％ 27 0.200 1,400 1,600 1,050 1,250 100 NRS5014T 150MMGG RoHS 15 ±20％ 20 0.320 1,100 1,300 650 790 100 NRS5014T 220MMGG RoHS 22 ±20％ 16 0.450 900 1,000 550 660 100 ●NRS5020 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±20％） frequency［kHz］ ［MHｚ］（min.） Max. Typ. Max. Typ. NRS5020T R47NMGJ RoHS 0.47 ±30％ 230 0.012 6,100 6,900 5,000 5,800 100 NRS5020T 1R0NMGJ RoHS 1.0 ±30％ 81 0.021 4,000 4,500 3,600 3,710 100 NRS5020T 1R5NMGJ RoHS 1.5 ±30％ 68 0.026 3,350 3,800 3,200 3,540 100 NRS5020T 2R2NMGJ RoHS 2.2 ±30％ 57 0.035 2,900 3,200 2,900 3,200 100 NRS5020T 3R3NMGJ RoHS 3.3 ±30％ 46 0.048 2,400 2,700 2,400 3,080 100 NRS5020T 4R7MMGJ RoHS 4.7 ±20％ 37 0.060 2,000 2,270 2,000 2,370 100 NRS5020T 6R8MMGJ RoHS 6.8 ±20％ 30 0.090 1,600 1,850 1,650 2,200 100 NRS5020T 100MMGJ RoHS 10 ±20％ 24 0.120 1,300 1,480 1,450 1,850 100 NRS5020T 150MMGJ RoHS 15 ±20％ 20 0.165 1,100 1,260 1,200 1,480 100 NRS5020T 220MMGJ RoHS 22 ±20％ 17 0.260 900 1,100 1,000 1,230 100 NRS5020T 470MMGJ RoHS 47 ±20％ 12 0.435 630 750 560 610 100 NRS5020T 101MMGJ RoHS 100 ±20％ 7 0.850 420 510 400 450 100 ※） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)  ※） The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃) ※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. i_smd_NR_e-E07R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 19 69

■PARTS NUMBER ●NRS5024 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±20％） frequency［kHz］ ［MHｚ］（min.） Max. Typ. Max. Typ. NRS5024T 1R0NMGJ RoHS 1.0 ±30％ 85 0.016 5,800 6,800 4,400 4,900 100 NRS5024T 1R5NMGJ RoHS 1.5 ±30％ 67 0.022 5,200 5,800 3,600 4,300 100 NRS5024T 2R2NMGJ RoHS 2.2 ±30％ 51 0.029 4,100 4,800 3,100 3,600 100 NRS5024T 3R3NMGJ RoHS 3.3 ±30％ 41 0.043 3,100 3,700 2,400 2,750 100 NRS5024T 4R7MMGJ RoHS 4.7 ±20％ 37 0.055 2,700 3,400 2,000 2,400 100 NRS5024T 6R8MMGJ RoHS 6.8 ±20％ 28 0.080 2,200 2,750 1,600 1,800 100 NRS5024T 100MMGJ RoHS 10 ±20％ 21 0.125 1,700 2,100 1,200 1,460 100 NRS5024T 150MMGJ RoHS 15 ±20％ 18 0.170 1,400 1,750 1,000 1,250 100 NRS5024T 220MMGJ RoHS 22 ±20％ 15 0.230 1,200 1,450 820 900 100 NRS5024T 330MMGJ RoHS 33 ±20％ 11 0.370 1,000 1,200 630 700 100 ●NRS5030 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±30％） frequency［kHz］ ［MHｚ］（min.） Max. Typ. Max. Typ. NRS5030T R47NMGJ RoHS 0.47 ±30％ 185 0.010 9,000 9,400 5,000 5,900 100 IN NRS5030T 1R0NMGJ RoHS 1.0 ±30％ 110 0.015 6,600 7,400 4,000 4,900 100 D NRS5030T 2R2NMGJ RoHS 2.2 ±30％ 46 0.023 4,200 5,000 3,500 4,100 100 U NRS5030T 3R3MMGJ RoHS 3.3 ±20％ 36 0.030 3,600 3,900 3,000 3,600 100 C NRS5030T 4R7MMGJ RoHS 4.7 ±20％ 31 0.035 3,100 3,500 2,600 3,000 100 T NRS5030T 6R8MMGJ RoHS 6.8 ±20％ 22 0.052 2,500 2,800 2,300 2,500 100 O NRS5030T 100MMGJ RoHS 10 ±20％ 20 0.070 2,100 2,300 1,700 2,000 100 R NRS5030T 150MMGJ RoHS 15 ±20％ 14 0.125 1,600 1,800 1,400 1,550 100 S ／ NRS5030T 220MMGJ RoHS 22 ±20％ 13 0.180 1,400 1,500 1,050 1,200 100 NRS5030T 330MMGJ RoHS 33 ±20％ 10 0.225 1,150 1,250 800 950 100 P O NRS5030T 470MMGJ RoHS 47 ±20％ 9 0.325 950 1,050 700 800 100 W ●NRS5040 Shielded type E Self-resonant Rated current　※）　［ｍA］ R Parts number EHS Nominal inductance Inductance tolerance frequency DC Resistance Saturation current: Idc1 Temperature rise current: Idc2 Measuring ［μH］ ［Ω］（±30％） frequency［kHz］ IN ［MHｚ］（min.） Max. Typ. Max. Typ. D NRS5040T 1R5NMGJ RoHS 1.5 ±30％ 60 0.017 6,400 6,530 4,500 4,730 100 U NRS5040T 2R2NMGJ RoHS 2.2 ±30％ 42 0.022 5,000 5,250 3,700 4,080 100 C NRS5040T 3R3NMGJ RoHS 3.3 ±30％ 32 0.027 4,000 4,280 3,300 3,770 100 T NRS5040T 4R7NMGK RoHS 4.7 ±30％ 28 0.029 3,300 3,470 3,100 3,500 100 O NRS5040T 6R8MMGJ RoHS 6.8 ±20％ 21 0.049 2,800 2,910 2,400 2,470 100 R NRS5040T 100MMGJ RoHS 10 ±20％ 18 0.056 2,300 2,470 2,100 2,210 100 S NRS5040T 150MMGJ RoHS 15 ±20％ 13 0.080 2,000 2,150 1,800 1,920 100 NRS5040T 220MMGK RoHS 22 ±20％ 9 0.126 1,500 1,580 1,400 1,470 100 NRS5040T 330MMGJ RoHS 33 ±20％ 7 0.180 1,300 1,390 1,200 1,270 100 NRS5040T 470MMGJ RoHS 47 ±20％ 6 0.310 1,100 1,150 900 950 100 ●NRS6010 type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±20％） frequency［kHz］ ［MHｚ］（min.） Max. Typ. Max. Typ. NRS6010T 1R5MMGF RoHS 1.5 ±20％ 77 0.090 2,400 2,650 1,900 2,150 100 NRS6010T 2R2MMGF RoHS 2.2 ±20％ 56 0.110 1,900 2,120 1,700 1,950 100 NRS6010T 3R3MMGF RoHS 3.3 ±20％ 42 0.135 1,600 1,750 1,500 1,750 100 NRS6010T 4R7MMGF RoHS 4.7 ±20％ 36 0.165 1,300 1,470 1,400 1,600 100 NRS6010T 6R8MMGF RoHS 6.8 ±20％ 30 0.220 1,200 1,300 1,200 1,320 100 NRS6010T 100MMGF RoHS 10 ±20％ 25 0.270 1,000 1,100 1,100 1,200 100 NRS6010T 220MMGF RoHS 22 ±20％ 12 0.580 650 720 700 740 100 ●NRS6012 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±20％） frequency［kHz］ ［MHｚ］（min.） Max. Typ. Max. Typ. NRS6012T 1R0NMGJ RoHS 1.0 ±30％ 95 0.050 3,000 3,900 2,400 2,700 100 NRS6012T 1R5NMGG RoHS 1.5 ±30％ 69 0.067 2,600 3,500 2,100 2,300 100 NRS6012T 2R5NMGG RoHS 2.5 ±30％ 45 0.090 2,100 2,900 1,800 2,100 100 NRS6012T 3R3NMGG RoHS 3.3 ±30％ 42 0.105 1,800 2,500 1,700 1,950 100 NRS6012T 4R7MMGG RoHS 4.7 ±20％ 36 0.125 1,600 2,100 1,550 1,750 100 NRS6012T 5R3MMGJ RoHS 5.3 ±20％ 34 0.125 1,500 1,750 1,550 1,750 100 NRS6012T 6R8MMGJ RoHS 6.8 ±20％ 30 0.165 1,300 1,600 1,350 1,600 100 NRS6012T 100MMGJ RoHS 10 ±20％ 22 0.200 1,000 1,400 1,200 1,380 100 NRS6012T 150MMGJ RoHS 15 ±20％ 18 0.295 800 1,100 800 950 100 NRS6012T 220MMGJ RoHS 22 ±20％ 12 0.465 760 900 650 750 100 NRS6012T 330MMGJ RoHS 33 ±20％ 8 0.580 590 800 550 670 100 NRS6012T 470MMGJ RoHS 47 ±20％ 6 0.965 520 630 460 540 100 NRS6012T 680MMGJ RoHS 68 ±20％ 3 1.16 440 560 410 450 100 NRS6012T 101MMGJ RoHS 100 ±20％ 1 1.67 350 490 320 380 100 ※） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)  ※） The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃) ※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. i_smd_NR_e-E07R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 70 19

■PARTS NUMBER ●NRS6014 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±20％） frequency［kHz］ ［MHｚ］（min.） Max. Typ. Max. Typ. NRS6014T 1R2NMGG RoHS 1.2 ±30％ 77 0.042 4,000 4,400 2,750 3,200 100 NRS6014T 2R2NMGG RoHS 2.2 ±30％ 61 0.055 3,000 3,500 2,300 2,600 100 NRS6014T 3R3NMGG RoHS 3.3 ±30％ 41 0.075 2,500 2,600 2,000 2,200 100 NRS6014T 4R7MMGG RoHS 4.7 ±20％ 36 0.090 2,000 2,170 1,900 1,950 100 NRS6014T 6R8MMGG RoHS 6.8 ±20％ 30 0.115 1,700 1,880 1,650 1,700 100 NRS6014T 100MMGG RoHS 10 ±20％ 24 0.140 1,400 1,540 1,400 1,500 100 NRS6014T 150MMGG RoHS 15 ±20％ 20 0.210 1,150 1,300 1,200 1,280 100 NRS6014T 220MMGG RoHS 22 ±20％ 16 0.300 950 1,100 1,000 1,090 100 ●NRS6020 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±20％） frequency［kHz］ ［MHｚ］（min.） Max. Typ. Max. Typ. NRS6020T 0R8NMGG RoHS 0.8 ±30％ 110 0.020 6,400 7,400 4,100 4,800 100 NRS6020T 1R5NMGJ RoHS 1.5 ±30％ 93 0.026 4,300 5,300 3,600 4,200 100 NRS6020T 2R2NMGJ RoHS 2.2 ±30％ 73 0.034 3,200 4,000 2,900 3,400 100 NRS6020T 3R3NMGJ RoHS 3.3 ±30％ 55 0.040 2,800 3,400 2,750 3,100 100 IN NRS6020T 4R7NMGJ RoHS 4.7 ±30％ 43 0.058 2,400 2,800 2,150 2,500 100 D NRS6020T 6R8NMGJ RoHS 6.8 ±30％ 30 0.085 2,000 2,600 1,800 2,100 100 U NRS6020T 100MMGG RoHS 10 ±20％ 18 0.125 1,900 2,240 1,500 1,700 100 C NRS6020T 220MMGG RoHS 22 ±20％ 11 0.290 1,250 1,470 950 1,100 100 T O ●NRS6028 Shielded type R S Nominal inductance Self-resonant DC Resistance Rated current　※）　［ｍA］ Measuring ／ Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［MHｚ］（min.） ［Ω］（±30％） Max. Typ. Max. Typ. frequency［kHz］ PO NRS6028T 0R9NMGJ RoHS 0.9 ±30％ 90 0.013 6,700 7,900 4,600 5,200 100 W NRS6028T 1R5NMGJ RoHS 1.5 ±30％ 78 0.016 5,100 6,100 4,200 4,700 100 NRS6028T 2R2NMGJ RoHS 2.2 ±30％ 68 0.020 4,200 5,100 3,700 4,200 100 E NRS6028T 3R0NMGJ RoHS 3.0 ±30％ 55 0.023 3,600 4,300 3,400 3,900 100 R NRS6028T 4R7MMGK RoHS 4.7 ±20％ 39 0.031 2,700 3,300 3,000 3,400 100 IN NRS6028T 6R8MMGJ RoHS 6.8 ±20％ 25 0.043 2,600 3,000 2,500 2,900 100 D NRS6028T 100MMGK RoHS 10 ±20％ 20 0.065 1,900 2,200 1,900 2,200 100 U NRS6028T 150MMGJ RoHS 15 ±20％ 17 0.095 1,600 1,900 1,800 1,900 100 C NRS6028T 220MMGJ RoHS 22 ±20％ 12 0.135 1,300 1,600 1,400 1,600 100 T NRS6028T 330MMGJ RoHS 33 ±20％ 10 0.220 1,100 1,300 1,100 1,250 100 O NRS6028T 470MMGJ RoHS 47 ±20％ 8 0.300 1,000 1,150 920 1,050 100 R NRS6028T 680MMGJ RoHS 68 ±20％ 5 0.420 800 950 770 880 100 S NRS6028T 101MMGJ RoHS 100 ±20％ 3 0.600 650 750 660 750 100 ●NRS6045 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±30％） frequency［kHz］ ［MHｚ］（min.） Max. Typ. Max. Typ. NRS6045T 1R0NMGK RoHS 1.0 ±30％ 110 0.014 9,800 11,000 4,500 5,200 100 NRS6045T 1R3NMGK RoHS 1.3 ±30％ 95 0.016 8,200 9,300 4,200 4,800 100 NRS6045T 1R5NMGK RoHS 1.5 ±30％ 95 0.016 8,200 9,300 4,200 4,800 100 NRS6045T 1R8NMGK RoHS 1.8 ±30％ 80 0.019 7,200 8,100 3,900 4,400 100 NRS6045T 2R2NMGK RoHS 2.2 ±30％ 60 0.022 6,400 7,300 3,600 4,100 100 NRS6045T 2R3NMGK RoHS 2.3 ±30％ 60 0.022 6,400 7,300 3,600 4,100 100 NRS6045T 3R0NMGK RoHS 3.0 ±30％ 45 0.024 5,600 6,500 3,300 4,000 100 NRS6045T 3R3NMGK RoHS 3.3 ±30％ 45 0.024 5,600 6,500 3,300 4,000 100 NRS6045T 4R5MMGK RoHS 4.5 ±20％ 25 0.030 4,400 5,400 3,100 3,600 100 NRS6045T 4R7NMGK RoHS 4.7 ±30％ 25 0.030 4,400 5,400 3,100 3,600 100 NRS6045T 6R3MMGK RoHS 6.3 ±20％ 15 0.036 3,600 4,300 3,000 3,300 100 NRS6045T 6R8MMGK RoHS 6.8 ±20％ 15 0.036 3,600 4,300 3,000 3,300 100 NRS6045T 100MMGK RoHS 10 ±20％ 12 0.046 3,100 3,600 2,400 2,800 100 NRS6045T 150MMGK RoHS 15 ±20％ 10 0.070 2,500 3,000 1,900 2,300 100 NRS6045T 220MMGK RoHS 22 ±20％ 7 0.107 2,000 2,400 1,600 1,900 100 NRS6045T 330MMGK RoHS 33 ±20％ 6 0.141 1,650 2,000 1,400 1,600 100 NRS6045T 470MMGK RoHS 47 ±20％ 5 0.211 1,400 1,600 1,150 1,350 100 NRS6045T 680MMGK RoHS 68 ±20％ 4 0.304 1,100 1,300 950 1,100 100 NRS6045T 101MMGK RoHS 100 ±20％ 3 0.466 900 1,200 750 900 100 ※） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)  ※） The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃) ※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. i_smd_NR_e-E07R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 19 71

■PARTS NUMBER ●NRS8030 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±30％） frequency［kHz］ ［MHｚ］（min.） Max. Typ. Max. Typ. NRS8030T 1R0NJGJ RoHS 1.0 ±30％ 120 0.009 7,800 9,300 6,200 7,600 100 NRS8030T 1R5NJGJ RoHS 1.5 ±30％ 80 0.012 6,200 7,800 5,300 6,400 100 NRS8030T 2R2NJGJ RoHS 2.2 ±30％ 60 0.015 4,900 6,100 4,800 5,600 100 NRS8030T 3R3MJGJ RoHS 3.3 ±20％ 50 0.019 4,200 5,200 4,300 5,100 100 NRS8030T 4R7MJGJ RoHS 4.7 ±20％ 40 0.022 3,600 4,400 4,000 4,700 100 NRS8030T 6R8MJGJ RoHS 6.8 ±20％ 32 0.029 3,000 3,600 3,400 4,000 100 NRS8030T 100MJGJ RoHS 10 ±20％ 27 0.033 2,400 2,900 3,000 3,600 100 NRS8030T 150MJGJ RoHS 15 ±20％ 20 0.060 2,000 2,300 2,200 2,600 100 NRS8030T 220MJGJ RoHS 22 ±20％ 16 0.070 1,750 2,200 1,900 2,300 100 NRS8030T 330MJGJ RoHS 33 ±20％ 13 0.120 1,300 1,600 1,500 1,800 100 NRS8030T 470MJGJ RoHS 47 ±20％ 11 0.170 1,100 1,400 1,300 1,500 100 ●NRS8040 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±30％） frequency［kHz］ ［MHｚ］（min.） Max. Typ. Max. Typ. IN NRS8040T 0R9NJGJ RoHS 0.9 ±30％ 85 0.006 13,000 14,000 7,800 9,600 100 D NRS8040T 1R0NJGJ RoHS 1 ±30％ 85 0.006 13,000 14,000 7,800 9,600 100 U NRS8040T 1R4NJGJ RoHS 1.4 ±30％ 63 0.007 10,000 11,000 7,000 8,400 100 C NRS8040T 1R5NJGJ RoHS 1.5 ±30％ 63 0.007 10,000 11,000 7,000 8,400 100 T NRS8040T 2R0NJGJ RoHS 2.0 ±30％ 50 0.009 8,100 9,200 6,300 7,600 100 O NRS8040T 2R2NJGJ RoHS 2.2 ±30％ 50 0.009 8,100 9,200 6,300 7,600 100 R NRS8040T 3R3NJGJ RoHS 3.3 ±30％ 34 0.015 6,400 6,800 4,900 6,000 100 S ／ NRS8040T 3R6NJGJ RoHS 3.6 ±30％ 34 0.015 6,400 6,800 4,900 6,000 100 NRS8040T 4R7NJGJ RoHS 4.7 ±30％ 30 0.018 5,400 5,900 4,100 5,200 100 P O NRS8040T 6R8NJGJ RoHS 6.8 ±30％ 24 0.025 4,400 4,800 3,700 4,400 100 NRS8040T 100MJGJ RoHS 10 ±20％ 22 0.034 3,800 4,100 3,100 3,500 100 W NRS8040T 150MJGJ RoHS 15 ±20％ 16 0.050 2,900 3,200 2,400 3,000 100 E NRS8040T 220MJGJ RoHS 22 ±20％ 13 0.066 2,400 2,700 2,200 2,600 100 R NRS8040T 330MJGK RoHS 33 ±20％ 12 0.100 2,000 2,300 1,700 1,900 100 IN NRS8040T 470MJGK RoHS 47 ±20％ 8 0.140 1,500 1,800 1,500 1,600 100 D NRS8040T 680MJGK RoHS 68 ±20％ 7 0.210 1,300 1,500 1,200 1,300 100 U NRS8040T 101MJGK RoHS 100 ±20％ 6 0.280 1,100 1,300 1,000 1,100 100 C NRS8040T 151MJGK RoHS 150 ±20％ 5 0.420 900 980 800 890 100 T NRS8040T 221MJGK RoHS 220 ±20％ 4 0.620 700 800 670 740 100 O R ●NR 3010 Shielded type S Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±20％） frequency［kHz］ ［MHｚ］（min.） Max. Max. NR 3010T 1R0N RoHS 1.0 ±30％ 126 0.065 1,300 1,400 100 NR 3010T 1R5N RoHS 1.5 ±30％ 98 0.080 1,200 1,300 100 NR 3010T 2R2M RoHS 2.2 ±20％ 82 0.095 1,100 1,100 100 NR 3010T 3R3M RoHS 3.3 ±20％ 63 0.140 870 940 100 NR 3010T 4R7M RoHS 4.7 ±20％ 56 0.190 750 780 100 NR 3010T 6R8M RoHS 6.8 ±20％ 46 0.300 610 630 100 NR 3010T 100M RoHS 10 ±20％ 35 0.450 500 510 100 NR 3010T 150M RoHS 15 ±20％ 30 0.740 400 400 100 NR 3010T 220M RoHS 22 ±20％ 25 1.03 350 350 100 NR 3010T 330M RoHS 33 ±20％ 20 1.55 260 275 100 NR 3010T 470M RoHS 47 ±20％ 17 2.05 220 235 100 ●NR 3012 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±20％） frequency［kHz］ ［MHｚ］（min.） Max. Max. NR 3012T 1R0N RoHS 1.0 ±30％ 110 0.050 1,500 1,490 100 NR 3012T 1R5N RoHS 1.5 ±30％ 92 0.060 1,360 1,400 100 NR 3012T 2R2M RoHS 2.2 ±20％ 70 0.080 1,100 1,200 100 NR 3012T 3R3M RoHS 3.3 ±20％ 55 0.100 910 1,050 100 NR 3012T 4R7M RoHS 4.7 ±20％ 48 0.130 770 980 100 NR 3012T 6R8M RoHS 6.8 ±20％ 40 0.190 670 740 100 NR 3012T 100M RoHS 10 ±20％ 32 0.290 540 630 100 NR 3012T 150M RoHS 15 ±20％ 27 0.450 440 485 100 NR 3012T 220M RoHS 22 ±20％ 22 0.630 375 420 100 NR 3012T 330M RoHS 33 ±20％ 19 1.03 310 330 100 NR 3012T 470M RoHS 47 ±20％ 17 1.45 250 280 100 ※） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)  ※） The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃) ※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. i_smd_NR_e-E07R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 72 19

■PARTS NUMBER ●NR 3015 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±20％） frequency［kHz］ ［MHｚ］（min.） Max. Max. NR 3015T 1R0N RoHS 1.0 ±30％ 100 0.030 2,100 2,100 100 NR 3015T 1R5N RoHS 1.5 ±30％ 87 0.040 1,800 1,820 100 NR 3015T 2R2M RoHS 2.2 ±20％ 64 0.060 1,480 1,500 100 NR 3015T 3R3M RoHS 3.3 ±20％ 49 0.080 1,210 1,230 100 NR 3015T 4R7M RoHS 4.7 ±20％ 40 0.120 1,020 1,040 100 NR 3015T 6R8M RoHS 6.8 ±20％ 36 0.160 870 880 100 NR 3015T 100M RoHS 10 ±20％ 28 0.230 700 710 100 NR 3015T 150M RoHS 15 ±20％ 23 0.360 560 560 100 NR 3015T 220M RoHS 22 ±20％ 20 0.520 470 470 100 NR 3015T 330M RoHS 33 ±20％ 18 0.840 390 370 100 NR 3015T 470M RoHS 47 ±20％ 17 1.34 320 300 100 ●NR 4010 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±20％） frequency［kHz］ ［MHｚ］（min.） Max. Max. NR 4010T 1R0N RoHS 1.0 ±30％ 116 0.100 1,800 1,050 100 IN NR 4010T 2R2N RoHS 2.2 ±30％ 73 0.150 1,150 890 100 D NR 4010T 3R3M RoHS 3.3 ±20％ 58 0.180 1,100 820 100 U NR 4010T 4R7M RoHS 4.7 ±20％ 47 0.210 900 750 100 C NR 4010T 6R8M RoHS 6.8 ±20％ 38 0.300 740 620 100 T NR 4010T 100M RoHS 10 ±20％ 31 0.380 560 600 100 O NR 4010T 150M RoHS 15 ±20％ 24 0.510 470 510 100 R S NR 4010T 220M RoHS 22 ±20％ 19 0.870 360 400 100 ／ NR 4010T 330M RoHS 33 ±20％ 15 1.54 280 300 100 P NR 4010T 470M RoHS 47 ±20％ 13 1.81 240 280 100 O W ●NR 4012 Shielded type Self-resonant Rated current　※）　［ｍA］ E Parts number EHS Nominal inductance Inductance tolerance frequency DC Resistance Saturation current: Idc1 Temperature rise current: Idc2 Measuring R ［μH］ ［Ω］（±20％） frequency［kHz］ ［MHｚ］（min.） Max. Max. IN NR 4012T 1R0N RoHS 1.0 ±30％ 131 0.060 2,500 1,500 100 D NR 4012T 2R2M RoHS 2.2 ±20％ 66 0.090 1,650 1,200 100 U NR 4012T 3R3M RoHS 3.3 ±20％ 50 0.130 1,200 980 100 C NR 4012T 4R7M RoHS 4.7 ±20％ 45 0.140 1,050 960 100 T NR 4012T 6R8M RoHS 6.8 ±20％ 35 0.180 900 840 100 O NR 4012T 100M RoHS 10 ±20％ 28 0.240 740 770 100 R NR 4012T 150M RoHS 15 ±20％ 23 0.400 560 600 100 S NR 4012T 220M RoHS 22 ±20％ 18 0.480 510 540 100 NR 4012T 330M RoHS 33 ±20％ 15 0.810 400 420 100 NR 4012T 470M RoHS 47 ±20％ 12 1.00 350 370 100 ●NR 4018 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±20％） frequency［kHz］ ［MHｚ］（min.） Max. Max. NR 4018T 1R0N RoHS 1.0 ±30％ 80 0.030 4,000 1,830 100 NR 4018T 2R2M RoHS 2.2 ±20％ 52 0.060 2,700 1,440 100 NR 4018T 3R3M RoHS 3.3 ±20％ 44 0.070 2,000 1,230 100 NR 4018T 4R7M RoHS 4.7 ±20％ 34 0.090 1,700 1,200 100 NR 4018T 6R8M RoHS 6.8 ±20％ 29 0.110 1,450 1,060 100 NR 4018T 100M RoHS 10 ±20％ 24 0.180 1,200 840 100 NR 4018T 150M RoHS 15 ±20％ 19 0.250 940 650 100 NR 4018T 220M RoHS 22 ±20％ 16 0.360 800 590 100 NR 4018T 330M RoHS 33 ±20％ 12 0.530 650 490 100 NR 4018T 470M RoHS 47 ±20％ 10 0.650 570 420 100 NR 4018T 680M RoHS 68 ±20％ 8.3 1.00 470 320 100 NR 4018T 101M RoHS 100 ±20％ 6.5 1.50 400 270 100 NR 4018T 151M RoHS 150 ±20％ 5.5 2.50 310 220 100 NR 4018T 221M RoHS 220 ±20％ 4.0 4.00 270 170 100 ●NR 5040 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±30％） frequency［kHz］ ［MHｚ］（min.） Max. Max. NR 5040T 1R5N RoHS 1.5 ±30％ 60 0.020 6,000 3,600 100 NR 5040T 2R2N RoHS 2.2 ±30％ 42 0.022 4,600 3,500 100 NR 5040T 3R3N RoHS 3.3 ±30％ 32 0.027 3,800 3,300 100 NR 5040T 4R7N RoHS 4.7 ±30％ 28 0.029 3,300 3,100 100 NR 5040T 6R8M RoHS 6.8 ±20％ 21 0.049 2,600 2,300 100 NR 5040T 100M RoHS 10 ±20％ 18 0.056 2,300 2,100 100 NR 5040T 150M RoHS 15 ±20％ 13 0.080 2,000 1,800 100 NR 5040T 220M RoHS 22 ±20％ 9 0.126 1,600 1,400 100 NR 5040T 330M RoHS 33 ±20％ 7 0.180 1,300 1,200 100 NR 5040T 470M RoHS 47 ±20％ 6 0.310 1,100 900 100 ※） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)  ※） The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃) ※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. i_smd_NR_e-E07R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 19 73

■PARTS NUMBER ●NR 6012 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±20％） frequency［kHz］ ［MHｚ］（min.） Max. Max. NR 6012T 2R5NE RoHS 2.5 ±30％ 45 0.090 2,100 1,730 100 NR 6012T 4R0NE RoHS 4.0 ±30％ 39 0.105 1,800 1,570 100 NR 6012T 5R3ME RoHS 5.3 ±20％ 34 0.125 1,500 1,400 100 NR 6012T 6R8ME RoHS 6.8 ±20％ 30 0.165 1,300 1,180 100 NR 6012T 100ME RoHS 10 ±20％ 22 0.235 1,000 1,000 100 NR 6012T 150ME RoHS 15 ±20％ 18 0.330 800 790 100 NR 6012T 220ME RoHS 22 ±20％ 12 0.530 760 630 100 NR 6012T 330ME RoHS 33 ±20％ 8 0.700 590 530 100 NR 6012T 470ME RoHS 47 ±20％ 6 1.05 520 460 100 NR 6012T 680ME RoHS 68 ±20％ 3 1.35 440 410 100 NR 6012T 101ME RoHS 100 ±20％ 1 2.18 350 320 100 ●NR 6020 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±20％） frequency［kHz］ ［MHｚ］（min.） Max. Max. IN NR 6020T 0R8N RoHS 0.8 ±30％ 110 0.020 5,500 3,800 100 D NR 6020T 1R5N RoHS 1.5 ±30％ 93 0.026 4,000 3,200 100 U NR 6020T 2R2N RoHS 2.2 ±30％ 73 0.034 3,200 2,700 100 C NR 6020T 3R3N RoHS 3.3 ±30％ 55 0.040 2,800 2,600 100 T NR 6020T 4R7N RoHS 4.7 ±30％ 43 0.058 2,400 2,000 100 O NR 6020T 6R8N RoHS 6.8 ±30％ 30 0.085 2,000 1,800 100 R NR 6020T 100M RoHS 10 ±20％ 18 0.125 1,700 1,400 100 S ／ NR 6020T 220M RoHS 22 ±20％ 11 0.290 1,050 950 100 P O ●NR 6028 Shielded type W Nominal inductance Self-resonant DC Resistance Rated current　※）　［ｍA］ Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±30％） frequency［kHz］ E ［MHｚ］（min.） Max. Max. R NR 6028T 0R9N RoHS 0.9 ±30％ 90 0.013 6,600 4,600 100 IN NR 6028T 1R5N RoHS 1.5 ±30％ 78 0.016 5,000 4,200 100 D NR 6028T 2R2N RoHS 2.2 ±30％ 68 0.020 4,200 3,700 100 U NR 6028T 3R0N RoHS 3.0 ±30％ 55 0.023 3,600 3,400 100 C NR 6028T 4R7M RoHS 4.7 ±20％ 39 0.031 2,700 3,000 100 T NR 6028T 6R0M RoHS 6.0 ±20％ 30 0.040 2,500 2,500 100 O NR 6028T 100M RoHS 10 ±20％ 20 0.065 1,900 1,900 100 R NR 6028T 150M RoHS 15 ±20％ 17 0.095 1,600 1,800 100 S NR 6028T 220M RoHS 22 ±20％ 12 0.135 1,300 1,400 100 NR 6028T 330M RoHS 33 ±20％ 10 0.220 1,100 1,100 100 NR 6028T 470M RoHS 47 ±20％ 8 0.300 950 920 100 NR 6028T 680M RoHS 68 ±20％ 5 0.420 760 770 100 NR 6028T 101M RoHS 100 ±20％ 3 0.600 620 660 100 ●NR 6045 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±30％） frequency［kHz］ ［MHｚ］（min.） Max. Max. NR 6045T 1R0N RoHS 1.0 ±30％ 110 0.014 8,500 4,200 100 NR 6045T 1R3N RoHS 1.3 ±30％ 95 0.016 8,000 4,000 100 NR 6045T 1R8N RoHS 1.8 ±30％ 80 0.018 7,000 3,700 100 NR 6045T 2R3N RoHS 2.3 ±30％ 60 0.021 6,000 3,500 100 NR 6045T 3R0N RoHS 3.0 ±30％ 45 0.024 5,000 3,200 100 NR 6045T 4R5M RoHS 4.5 ±20％ 25 0.031 4,000 3,000 100 NR 6045T 6R3M RoHS 6.3 ±20％ 15 0.038 3,800 2,800 100 NR 6045T 100M RoHS 10 ±20％ 12 0.047 3,000 2,500 100 NR 6045T 150M RoHS 15 ±20％ 10 0.077 2,300 1,900 100 NR 6045T 220M RoHS 22 ±20％ 7 0.115 1,900 1,500 100 NR 6045T 330M RoHS 33 ±20％ 6 0.145 1,500 1,400 100 NR 6045T 470M RoHS 47 ±20％ 5 0.220 1,300 1,100 100 NR 6045T 680M RoHS 68 ±20％ 4 0.330 1,000 900 100 NR 6045T 101M RoHS 100 ±20％ 3 0.500 800 700 100 ●NR 8040 Shielded type Self-resonant Rated current　※）　［ｍA］ Nominal inductance DC Resistance Measuring Parts number EHS Inductance tolerance frequency Saturation current: Idc1 Temperature rise current: Idc2 ［μH］ ［Ω］（±30％） frequency［kHz］ ［MHｚ］（min.） Max. Max. NR 8040T 0R9N RoHS 0.9 ±30％ 85 0.006 11,000 7,800 100 NR 8040T 1R4N RoHS 1.4 ±30％ 63 0.007 9,000 7,000 100 NR 8040T 2R0N RoHS 2.0 ±30％ 50 0.009 7,400 6,300 100 NR 8040T 3R6N RoHS 3.6 ±30％ 34 0.015 5,300 4,900 100 NR 8040T 4R7N RoHS 4.7 ±30％ 30 0.018 4,700 4,100 100 NR 8040T 6R8N RoHS 6.8 ±30％ 24 0.025 4,000 3,700 100 NR 8040T 100M RoHS 10 ±20％ 22 0.034 3,400 3,100 100 NR 8040T 150M RoHS 15 ±20％ 16 0.050 2,700 2,400 100 NR 8040T 220M RoHS 22 ±20％ 13 0.066 2,200 2,200 100 NR 8040T 330M RoHS 33 ±20％ 12 0.100 1,900 1,700 100 NR 8040T 470M RoHS 47 ±20％ 8 0.150 1,500 1,400 100 NR 8040T 680M RoHS 68 ±20％ 7 0.230 1,200 1,100 100 NR 8040T 101M RoHS 100 ±20％ 6 0.290 1,000 1,000 100 ※） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)  ※） The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃) ※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. i_smd_NR_e-E07R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 74 19

SMD POWER INDUCTORS (NR SERIES/NR SERIES H TYPE/M TYPE/S TYPE/V TYPE) ■PACKAGING ①Minimum Quantity Standard Quantity [pcs] Standard Quantity [pcs] Type Type Tape ＆ Reel Tape ＆ Reel NRV2010 2500 NRS5010 1000 NRS2012 NRS5012 1000 2500 NRV2012 NRS5014 1000 NRH2410 2500 NRS5020 800 NRH2412 2500 NRS5024 2500 NR 3010 NRS5030 500 2000 NRH3010 NR 5040 1500 NR 3012 NRS5040 NRH3012 2000 NRS6010 1000 NRV3012 NR 6012 1000 NR 3015 NRS6012 2000 NRS3015 NRS6014 1000 NR 4010 NR 6020 5000 2500 NRS4010 NRS6020 NR 4012 NR 6028 4500 2000 NRS4012 NRS6028 NR 4018 NR 6045 3500 NRS4018 NRM6045 1500 NRS6045 NRS8030 1000 NR 8040 1000 NRS8040 ②Tape Material ●Embossed Tape Top tape Chip Filled Sprocket hole Base tape Chip cavity Chip ③Taping dimensions ●Embossed tape 8mm wide (0.315 inches wide) φ1.5＋0.1/－0 1.75±0.1 Sprockethole (φ0.059＋0.004/-0) (0.069±0.004） T A ±0.1±0.004) ±0.2±0.008) B 3.5(0.138 8.0(0.315 K F 4.0±0.1 (0.157±0.004) 2.0±0.05 (0.079±0.002) Electrode（bottom view） ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_smd_NR_pack_e-E07R01

Chip cavity Insertion pitch Tape thickness Type A B F T K NRV2010 2.2±0.1 2.2±0.1 0.25±0.05 1.3±0.1 NRS2012 （0.102±0.004） （0.102±0.004） （0.009±0.002） （0.051±0.004） NRV2012 NRH2410 2.6±0.1 2.6±0.1 0.25±0.05 1.3±0.1 NRH2412 （0.087±0.004） （0.102±0.004） （0.009±0.002） （0.051±0.004） NR 3010 4.0±0.1 1.4±0.1 NRH3010 （0.157±0.004） （0.055±0.004） NR 3012 1.6±0.1 3.2±0.1 3.2±0.1 0.3±0.05 NRH3012 （0.063±0.004） （0.126±0.004） （0.126±0.004） （0.012±0.002） NRV3012 1.9±0.1 NR 3015 （0.075±0.004） NRS3015 Unit：mm（inch） ●Embossed tape 12mm wide (0.47 inches wide) φ1.5＋0.1/－0 1.75±0.1 Sprockethole (φ0.059＋0.004/-0) (0.069±0.004） T 4) 0 B A 5.5±0.1(0.217±0.0 12.0±0.3472±0.012) 0. ( K F 2.0±0.1 4.0±0.1 (0.079±0.004) (0.157±0.004) Electrode（bottom view） Chip cavity Insertion pitch Tape thickness Type A B F T K NR 4010 1.4±0.1 NRS4010 （0.055±0.004） NR 4012 4.3±0.1 4.3±0.1 1.6±0.1 NRS4012 （0.169±0.004） （0.169±0.004） （0.063±0.004） NR 4018 2.1±0.1 NRS4018 （0.083±0.004） 1.4±0.1 NRS5010 0.3±0.1 （0.055±0.004） （0.012±0.004） 1.4±0.1 NRS5012 （0.055±0.004） 5.25±0.1 5.25±0.1 1.6±0.1 NRS5014 （0.207±0.004） （0.207±0.004） （0.063±0.004） 2.3±0.1 NRS5020 （0.091±0.004） 2.7±0.1 NRS5024 （0.106±0.004） 8.0±0.1 5.15±0.1 5.15±0.1 3.2±0.1 NRS5030 （0.315±0.004） （0.203±0.004） （0.203±0.004） （0.126±0.004） NR 5040 5.15±0.1 5.15±0.1 4.2±0.1 NRS5040 （0.203±0.004） （0.203±0.004） （0.165±0.004） 1.4±0.1 NRS6010 （0.055±0.004） NR 6012 1.6±0.1 NRS6012 （0.063±0.004） 0.4±0.1 1.6±0.1 NRS6014 （0.016±0.004） （0.063±0.004） 6.3±0.1 6.3±0.1 NR 6020 2.3±0.1 （0.248±0.004） （0.248±0.004） NRS6020 （0.090±0.004） NR 6028 3.1±0.1 NRS6028 （0.122±0.004） NR 6045 4.7±0.1 NRM6045 （0.185±0.004） NRS6045 Unit：mm（inch） ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_smd_NR_pack_e-E07R01

●Embossed tape 16mm wide (0.63 inches wide) φ1.5±0.1 1.75±0.1 Sprockethole (φ0.059±0.004） (0.069±0.004） T 4) B A 7.5±0.1(0.295±0.00 16.0±0.3630±0.012) 0. ( K F 2.0±0.1 4.0±0.1 (0.079±0.004) (0.157±0.004) Electrode（bottom view） Chip cavity Insertion pitch Tape thickness Type A B F T K 3.4±0.1 NRS8030 8.3±0.1 8.3±0.1 12.0±0.1 0.5±0.1 （0.134±0.004） NR 8040 （0.327±0.004） （0.327±0.004） （0.472±0.004） （0.020±0.004） 4.5±0.1 NRS8040 （0.177±0.004） Unit：mm（inch） ④Leader and Blank portion ●NR, NRH, NRS, NRV ⑤Reel size Reel size (Reference values) Type φD φd W NRV2010 NRS2012 NRV2012 NRH2410 NRH2412 NR 3010 180±0.5 60±1.0 10.0±1.5 NRH3010 （7.087±0.019） （2.36±0.04） （0.394±0.059） NR 3012 NRH3012 NRV3012 NR 3015 NRS3015 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_smd_NR_pack_e-E07R01

NRS5010 NRS5012 NRS5014 NRS5020 180±3.0 60±2.0 14.0±1.5 NRS5030 （7.087±0.118） （2.36±0.08） （0.551±0.059） NRS6010 NR 6012 NRS6012 NRS6014 Unit：mm（inch） Reel size (Reference values) Type φD φd t（max.） W NR 4010 NRS4010 NR 4012 NRS4012 NR 4018 NRS4018 NRS5024 NR 5040 18.5 13.5±1.0 NRS5040 （0.72） （0.531±0.04） 330±3.0 80±2.0 NR 6020 （12.99±0.118） （3.15±0.078） NRS6020 NR 6028 NRS6028 NR 6045 NRM6045 NRS6045 NRS8030 22.5 17.5±1.0 NR 8040 （0.89） （0.689±0.04） NRS8040 Unit：mm（inch） ⑥Top Tape Strength The top tape requires a peel-off force of 0.1 to 1.3N in the direction of the arrow as illustrated below. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_smd_NR_pack_e-E07R01

SMD POWER INDUCTORS（NR□, NS SERIES） ■RELIABILITY DATA 1. Operating Temperature Range NR30/40/50/60/80, NRS20, NRV20/30, －25～＋120℃ NRH24/30 Type Specified Value NRS40/50/60/80 Type －25～＋125℃ NR10050 Type －25～＋105℃ NS101, NS125 Type －40～＋125℃ Test Methods and Including self-generated heat Remarks 2. Storage Temperature Range NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value －40～＋85℃ NR10050 Type NS101, NS125 Type Test Methods and NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type： Remarks －5 to 40℃ for the product with taping. 3. Rated current NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value Within the specified tolerance NR10050 Type NS101, NS125 Type 4. Inductance NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value Within the specified tolerance NR10050 Type NS101, NS125 Type Measuring equipment : LCR Meter （HP 4285A or equivalent） Measuring frequency : Specified frequency NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type : Test Methods and Measuring equipment : LCR Meter （HP 4285A or equivalent） Remarks Measuring frequency : 100kHz, 1V NR10050 Type : Measuring equipment : LCR Meter （HP 4263A or equivalent） Measuring frequency : 100kHz, 1V 5. DC Resistance NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value Within the specified tolerance NR10050 Type NS101, NS125 Type Test Methods and Measuring equipment : DC ohmmeter （HIOKI 3227 or equivalent） Remarks 6. Self resonance frequency NR30/40/50/60/80, NRV30, NRH24/30, NRS40/50/60/80 Type Within the specified tolerance Specified Value NR10050 Type NS101, NS125 Type － Test Methods and NR30/40/50/60/80, NRV30, NRH24/30, NRS40/50/60/80 Type, NR10050 Type : Remarks Measuring equipment : Impedance analyzer/material analyzer（HP4291A or equivalent HP4191A, 4192A or equivalent） ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_smd_NR_NS_reli_e-E04R01

7. Temperature characteristic NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Inductance change : Within ±20% Specified Value NR10050 Type NS101, NS125 Type Inductance change : Within ±15% NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type : Measurement of inductance shall be taken at temperature range within －25℃～＋85℃. With reference to inductance value at ＋20℃., change rate shall be calculated. NS101, NS125 Type : Measurement of inductance shall be taken at temperature range within －40℃～＋125℃. Test Methods and With reference to inductance value at ＋20℃., change rate shall be calculated. Remarks Change of maximum inductance deviation in step 1 to 5 Step Temperature（℃） 1 20 2 Minimum operating temperature 3 20 (Standard temperature) 4 Maximum operating temperature 5 20 8. Resistance to flexure of substrate NR30/40/50/60/80, NRV20/30, No damage NRH24/30, NRS20/40/50/60/80 Type Specified Value NR10050 Type － NS101, NS125 Type No damage NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NS101/125 Type : The test samples shall be soldered to the test board by the reflow. As illustrated below, apply force in the direction of the arrow indicating until deflection of the test board reaches to 2 mm. Test board size : 100×40×1.0 Test board material : Glass epoxy-resin Solder cream thickness : 0.10mm (NR30, NRS20, NRH24/30, NRV20/30) : 0.15mm(NR40/50/60/80, NRS40/50/60, NS101/125Type) Test Methods and Remarks Land dimension Type A B C Type A B C NRS20, NRV20 0.65 0.7 2.0 NS101 2.5 5.6 3.2 NRH24 0.7 0.75 2.0 NS125 2.5 8.6 3.2 C NR30, NRV30, NRH30 0.8 1.4 2.7 NR40, NRS40 1.2 1.6 3.7 A B A NR50, NRS50 1.5 2.1 4.0 NR60, NRS60 1.6 3.1 5.7 NR80, NRS80 1.8 3.8 7.5 9. Insulation resistance : between wires NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value － NR10050 Type NS101, NS125 Type 10. Insulation resistance : between wire and core NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value － NR10050 Type NS101, NS125 Type ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_smd_NR_NS_reli_e-E04R01

11. Withstanding voltage : between wire and core NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value － NR10050 Type NS101, NS125 Type 12. Adhesion of terminal electrode NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value Shall not come off PC board NR10050 Type NS101, NS125 Type NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NS101/125 Type : The test samples shall be soldered to the test board by the reflow. Applied force : 10N to X and Y directions. Duration : 5s. Solder cream thickness : 0.10mm (NR30, NRS20, NRH24/30, NRV20/30) : 0.15mm (NR40/50/60/80, NRS40/50/60, NS101/125Type) Test Methods and Remarks NR10050 Type Applied force : 5N to X and Y directions. Duration : 5s. 13. Resistance to vibration NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Inductance change : Within ±10% Specified Value NR10050 Type No significant abnormality in appearance. NS101, NS125 Type NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type : The test samples shall be soldered to the test board by the reflow. Then it shall be submitted to below test conditions. Frequency Range 10～55Hz Test Methods and Total Amplitude 1.5mm (May not exceed acceleration 196m/s2) Remarks Sweeping Method 10Hz to 55Hz to 10Hz for 1min. X Time Y For 2 hours on each X, Y, and Z axis. Z Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs. 14. Solderability NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value At least 90％ of surface of terminal electrode is covered by new solder. NR10050 Type NS101, NS125 Type The test samples shall be dipped in flux, and then immersed in molten solder as shown in below table. Flux : Methanol solution containing rosin 25%. Test Methods and NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type Remarks Solder Temperature 245±5℃ Time 5±1.0 sec. ※Immersion depth : All sides of mounting terminal shall be immersed. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_smd_NR_NS_reli_e-E04R01

15. Resistance to soldering heat NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Inductance change : Within ±10% Specified Value NR10050 Type No significant abnormality in appearance. NS101, NS125 Type NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type : The test sample shall be exposed to reflow oven at 230±5℃ for 40 seconds, with peak temperature at 260±5℃ for 5 seconds, 2 times. NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80Type, NS101/125 Type Test Methods and Test board material : Glass epoxy-resin Remarks Test board thickness : 1.0mm NR10050 Type Test board material : Glass epoxy-resin Test board thickness : 1.6mm Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs. 16. Thermal shock NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Inductance change : Within ±10% Specified Value NR10050 Type No significant abnormality in appearance. NS101, NS125 Type NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type : The test samples shall be soldered to the test board by the reflow. The test samples shall be placed at specified temperature for specified time by step 1 to step 4 as shown in below table in sequence. The temperature cycle shall be repeated 100 cycles. Conditions of 1 cycle Test Methods and Step Temperature (℃) Duration (min) Remarks 1 －40±3 30±3 2 Room temperature Within 3 3 ＋85±2 30±3 4 Room temperature Within 3 Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs. 17. Damp heat NR30/40/50/60/80, NRV20/30, Inductance change : Within ±10% NRH24/30, NRS20/40/50/60/80 Type No significant abnormality in appearance. Specified Value NR10050 Type － Inductance change : Within ±10% NS101, NS125 Type No significant abnormality in appearance. NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NS101/125 Type : The test samples shall be soldered to the test board by the reflow. Test Methods and The test samples shall be placed in thermostatic oven set at specified temperature and humidity as shown in below table. Remarks Temperature 60±2℃ Humidity 90～95%RH Time 500＋24/－0 hour Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs. 18. Loading under damp heat NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Inductance change : Within ±10% Specified Value NR10050 Type No significant abnormality in appearance. NS101, NS125 Type NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type : The test samples shall be soldered to the test board by the reflow. The test samples shall be placed in thermostatic oven set at specified temperature and humidity and applied the rated current Test Methods and continuously as shown in below table. Remarks Temperature 60±2℃ Humidity 90～95％RH Applied current Rated current Time 500＋24/－0 hour Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_smd_NR_NS_reli_e-E04R01

19. Low temperature life test NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Inductance change : Within ±10% Specified Value NR10050 Type No significant abnormality in appearance. NS101, NS125 Type NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type : The test samples shall be soldered to the test board by the reflow. After that, the test samples shall be placed at test conditions as shown Test Methods and in below table. Remarks Temperature －40±2℃ Time 500＋24/－0 hour Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs. 20. High temperature life test NR30/40/50/60/80, NRV20/30, － NRH24/30, NRS20/40/50/60/80 Type Specified Value NR10050 Type － NS101, NS125 Type － NR10050 Type : Test Methods and Temperature 105±3℃ Remarks Time 500＋24/－0 hour Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs. 21. Loading at high temperature life test NR30/40/50/60/80, NRV20/30, Inductance change : Within ±10% NRH24/30, NRS20/40/50/60/80 Type No significant abnormality in appearance. Specified Value NR10050 Type － Inductance change : Within ±10% NS101, NS125 Type No significant abnormality in appearance. NR30/40/50/60/80, NRV30, NRH24/30, NRS40/50/60/80 Type, NS12555, NS12565, NS12575 Type : The test samples shall be soldered to the test board by the reflow soldering. Test Methods and Temperature 85±2℃ Remarks Applied current Rated current Time 500＋24/－0 hour Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs. 22. Standard condition NR30/40/50/60/80, NRV20/30, Standard test condition : NRH24/30, NRS20/40/50/60/80 Type Unless otherwise specified, temperature is 20±15℃ and 65±20％of relative humidity. NR10050 Type Specified Value When there is any question concerning measurement result: In order to provide correlation data, the test shall be condition of 20±2℃ of NS101, NS125 Type temperature, 65±5% relative humidity. Inductance is in accordance with our measured value. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_smd_NR_NS_reli_e-E04R01

SMD POWER INDUCTORS（NR□, NS SERIES） ■PRECAUTIONS 1. Circuit Design ◆Operating environment 1. The products described in this specification are intended for use in general electronic equipment,(office supply equipment, telecommunications systems, measuring equipment, and household equipment). They are not intended for use in mission-critical Precautions equipment or systems requiring special quality and high reliability (traffic systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where product failure might result in loss of life, injury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance. 2. PCB Design ◆Land pattern design 1. Please refer to a recommended land pattern. Precautions 2. There is stress, which has been caused by distortion of a PCB, to the inductor. (NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/30/40/50/60/80 Type) 3. Please consider the arrangement of parts on a PCB. (NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/30/40/50/60/80 Type) ◆Land pattern design Surface Mounting 1. Mounting and soldering conditions should be checked beforehand. 2. Applicable soldering process to this products is reflow soldering only. 3. Please use the recommended land pattern shown as below. Electrical characteristics and the mounting ability of the product are being considered in the recommended land pattern. If a PCB is designed with other dimensions, defective soldering and stress to a product may occur due to misalignment. The performance of the product may not be brought out. If an adopted land pattern is different from the recommended land pattern, stress to the product will increase. It may cause cracks or defective electrical characteristics of the product. Please conduct validation completely before studying adoption of this product and please judge the pros and cons of adoption of this product with taking on responsibility. (NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/30/40/50/60/80 Type) 4. As coefficients of thermal expansion between an inductor and a PCB differs, cracks may occur on a ferrite core when thermal stress is applied to them after mounting an inductor. (Please refer to the drawings below.) Please conduct validation completely before studying adoption of this product and please judge the pros and cons of adoption of this product with taking on responsibility. (NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/30/40/50/60/80 Type) Clack on ferrite core Technical considerations Solder, electrode PCB 5. SMD inductors should be located to minimize any possible mechanical stresses from board warp or deflection. When splitting the PC board after mounting inductors and other components, care is required so as not to give any stresses of deflection or twisting to the board. （NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/30/40/50/60/80 Type） A product tends to undergo stress in order “A>C>B≡D”. Electrode Please consider the layouts of a product to minimize any stresses. A Perforation D B Slit C ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) i_smd_NR_NS_prec_e-E06R01

3. Considerations for automatic placement ◆Adjustment of mounting machine Precautions 1. Excessive impact load should not be imposed on the products when mounting onto the PC boards. 2. Mounting and soldering conditions should be checked beforehand. ◆Adjustment of mounting machine 1. When installing products, care should be taken not to apply distortion stress as it may deform the products. 2. Stress may be applied to a product with a warp or a twist in handling of the product. Please conduct validation completely before studying adoption of this product and please judge the pros and cons of adoption of this product with taking on responsibility. (NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/30/40/50/60/80 Type) Technical ＜Wrap＞ ＜Twist＞ considerations 4. Soldering ◆Reflow soldering 1. Please contact any of our offices for a reflow soldering, and refer to the recommended condition specified. 2. The product shall be used reflow soldering only. 3. Please do not add any stress to a product until it returns in normal temperature after reflow soldering. ◆Lead free soldering 1. When using products with lead free soldering, we request to use them after confirming adhesion, temperature of resistance to soldering Precautions heat, soldering etc sufficiently. ◆Recommended conditions for using a soldering iron (NR10050 Type) ・ Put the soldering iron on the land-pattern. ・ Soldering iron's temperature - Below 350℃ ・ Duration - 3 seconds or less ・ The soldering iron should not directly touch the inductor. ◆Reflow soldering 1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently degrade the reliability of the products. ・NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type Recommended reflow condition (Pb free solder) Technical considerations 5. Cleaning ◆Cleaning conditions Precautions 1. Washing by supersonic waves shall be avoided. Technical ◆Cleaning conditions considerations 1. If washed by supersonic waves, the products might be broken. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) i_smd_NR_NS_prec_e-E06R01

6. Handling ◆Handling 1. Keep the product away from all magnets and magnetic objects. ◆Breakaway PC boards (splitting along perforations) 1. When splitting the PC board after mounting product, care should be taken not to give any stresses of deflection or twisting to the board. 2. Board separation should not be done manually, but by using the appropriate devices. ◆Mechanical considerations Precautions 1. Please do not give the product any excessive mechanical shocks. 2. Please do not add any shock and power to a product in transportation. ◆Pick-up pressure 1. Please do not push to add any pressure to a winding part. Please do not give any shock and push into a ferrite core exposure part. ◆Packing 1. Please avoid accumulation of a packing box as much as possible. ◆Handling 1. There is a case that a characteristic varies with magnetic influence. ◆Breakaway PC boards (splitting along perforations) 1. The position of the product on PCBs shall be carefully considered to minimize the stress caused from splitting of the PCBs. ◆Mechanical considerations Technical 1. There is a case to be damaged by a mechanical shock. considerations 2. There is a case to be broken by the handling in transportation. ◆Pick-up pressure 1. Damage and a characteristic can vary with an excessive shock or stress. ◆Packing 1. If packing boxes are accumulated, that could cause a deformation on packing tapes or a damage on the products. 7. Storage conditions ◆Storage 1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should be controlled. ・ Recommended conditions Ambient temperature : －5～40℃ Precautions Humidity : Below 70% RH ・ The ambient temperature must be kept below 30℃. Even under ideal storage conditions, solderability of products electrodes may decrease as time passes. For this reason, product should be used within 6 months from the time of delivery. In case of storage over 6 months, solderability shall be checked before actual usage. ◆Storage Technical 1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes considerations and deterioration of taping/packaging materials may take place. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) i_smd_NR_NS_prec_e-E06R01

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: T aiyo Yuden: NR3010T100M NR3010T150M NR3010T1R0N NR3010T1R5N NR3010T220M NR3010T2R2M NR3010T330M NR3010T3R3M NR3010T470M NR3010T4R7M NR3010T6R8M NR3012T100M NR3012T150M NR3012T1R0N NR3012T1R5N NR3012T220M NR3012T2R2M NR3012T330M NR3012T3R3M NR3012T470M NR3012T4R7M NR3012T6R8M NR3015T100M NR3015T150M NR3015T1R0N NR3015T1R5N NR3015T220M NR3015T2R2M NR3015T330M NR3015T3R3M NR3015T470M NR3015T4R7M NR3015T6R8M NR4010T100M NR4010T150M NR4010T1R0N NR4010T220M NR4010T2R2N NR4010T330M NR4010T3R3M NR4010T470M NR4010T4R7M NR4010T4R7N NR4010T6R8M NR4012T100M NR4012T150M NR4012T1R0N NR4012T220M NR4012T221M NR4012T2R2M NR4012T2R2N NR4012T330M NR4012T3R3M NR4012T470M NR4012T471M NR4012T4R7M NR4012T4R7N NR4012T6R8M NR4018T100M NR4018T101M NR4018T150M NR4018T151M NR4018T1R0N NR4018T220M NR4018T221M NR4018T2R2M NR4018T330M NR4018T3R3M NR4018T470M NR4018T4R7M NR4018T680M NR4018T6R8M NR5040T100M NR5040T150M NR5040T1R5N NR5040T220M NR5040T2R2N NR5040T330M NR5040T3R3N NR5040T470M NR5040T4R7N NR5040T6R8M NR6012T100ME NR6012T101ME NR6012T150ME NR6012T220ME NR6012T2R5NE NR6012T330ME NR6012T470ME NR6012T4R0NE NR6012T5R3ME NR6012T680ME NR6012T6R8ME NR6020T0R8N NR6020T100M NR6020T1R5N NR6020T220M NR6020T2R2N NR6020T3R3N NR6020T4R7N