NOMC www.vishay.com Vishay Dale Thin Film Molded, 50 mil Pitch, Dual-In-Line Thin Film Resistor, Narrow Body, Surface Mount Network FEATURES • Standard 14 pins and 16 pins counts (0.150" narrow body) JEDEC MS-012 variation AB and AC Available • Rugged molded case construction Available • Excellent long term ratio stability (R ± 0.015 %) Actual Size • Low TCR tracking ± 5 ppm/°C The NOMC series features a standard 14 pins and 16 pins narrow body (0.150") small outline surface mount style. It • Isolated and bussed schematics can accommodate resistor networks to your particular • Material categorization: for definitions of compliance application requirements. The networks can be constructed please see www.vishay.com/doc?99912 with passivated nichrome (standard), or tantalum nitride (1) Note resistor films to optimize performance. * This datasheet provides information about parts that are Note RoHS-compliant and / or parts that are non RoHS-compliant. For (1) Available upon request. Resistance value range and example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details performance differs from passivated nichrome standard electrical specifications on datasheet, consult factory TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 5 ABSOLUTE RATIO TOL. 0.10 0.05 SCHEMATICS NOMC1401 or NOMCT1401 NOMC1403 or NOMCT1403 NOMC1601 or NOMCT1601 NOMC1603 or NOMCT1603 The 01 circuit provides a choice of 13 or 15 equal value The 03 circuit provides a choice of 7 or 8 equal value resistors each connected between a common lead (14 or resistors (14 or 16). Custom schematics available. 16). Custom schematics available. STANDARD RESISTANCE OFFERING (Equal Value Resistors) ISOLATED (03) SCHEMATIC BUSSED (01) SCHEMATIC 1 k 1 k 2 k 5 k 5 k 10 k 10 k 20 k 20 k 25 k 50 k 100 k Note • Consult factory for additional values Revision: 25-Apr-17 1 Document Number: 60007 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

NOMC www.vishay.com Vishay Dale Thin Film STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Passivated nichrome (standard) Material - Tantalum nitride (available upon request) Pin/Lead Number 14, 16 - 100  to 50 k each resistor (bussed (01) schematic) - Resistance Range 100  to 100 k each resistor (isolated (03) schematic) - TCR: Absolute ± 25 ppm/°C (standard) - 55 °C to + 125 °C TCR: Tracking ± 5 ppm/°C (typical) - 55 °C to + 125 °C Tolerance: Absolute ± 0.10 % to ± 1 % + 25 °C Tolerance: Ratio ± 0.025 % to ± 0.1 % + 25 °C 100 mW ((typical) (03) schematic) Power Rating: Resistor Maximum at + 70 °C 50 mW ((01) schematic) Power Rating: Package 400 mW/500 mW Maximum at + 70 °C Stability: Absolute R ± 0.05 % 2000 h at + 70 °C Stability: Ratio R ± 0.015 % 2000 h at + 70 °C Voltage Coefficient < 0.1 ppm/V - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range - 55 °C to + 125 °C - Storage Temperature Range - 55 °C to + 150 °C - Noise  - 30 dB - Thermal EMF 0.08 μV/°C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 °C Shelf Life Stability: Ratio R ± 0.002 % 1 year at + 25 °C DIMENSIONS AND IMPRINTING in inches and millimeters 14 16 DIMENSION INCHES MILLIMETERS INCHES MILLIMETERS H 0.235 5.969 0.235 5.969 H E E 0.154 3.911 0.154 3.91 Index Area PIN 1 Locator O 0.340 8.363 0.390 9.906 A 0.063 1.60 0.063 1.60 e 0.050 1.270 0.050 1.270 O h x 45° B 0.015 0.381 0.015 0.381 C A C 0.008 0.203 0.008 0.203 e B L 0.025 0.635 0.025 0.635 L A1 A1 0.006 0.152 0.006 0.152 h 0.015 0.381 0.015 0.381 MECHANICAL SPECIFICATIONS Resistive Element Passivated nichrome Substrate Material Silicon Body Molded epoxy Terminals Copper alloy Lead (Pb)-free Option 100 % matte tin Tin Lead Option Sn90 Tin Lead and Lead (Pb)-free Finish Plated Note • Available upon request. Resistance value range and performance differs from passivated nichrome standard electrical specifications on datasheet, consult factory Revision: 25-Apr-17 2 Document Number: 60007 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

NOMC www.vishay.com Vishay Dale Thin Film ORDERING INFORMATION CHECK LIST (Customs) Special requirements should be identified in advance, but as a minimum, you should have the following information ready. ELECTRICAL MECHANICAL 1. Resistors, by value and tolerance 1. Maximum allowable seated height (from PC board to top of 2. Reference resistor(s) and matching of which resistors to which network) reference resistors 2. Special marking concerns 3. Reference by ratio 3. Schematic pin out of package 4. Absolute temperature coefficient of resistivity 5. Temperature tracking of subordinate resistors to reference resistor(s) 6. Maximum operating voltage 7. Resistor power ratings 8. Operating temperature range GLOBAL PART NUMBER INFORMATION New Global Part Numbering: NOMC16031002BUF N O M C 1 6 0 3 1 0 0 2 B U F N O M C T 1 4 0 3 1 0 0 3 Z T 1 GLOBAL MODEL TOLERANCE AND PINS SCHEMATIC RESISTANCE PACKAGING (4 or 5 digits) RATIO TOLERANCE NOMC 14 01 = 13 or 15 First 3 digits are Abs. Tol. Ratio TAPE AND REEL (Tin Lead) 16 bussed significant figures   T0 = 100 min., 100 mult equal value and the last digit A = 0.1 % (1) 0.05 % T1 = 1000 min., 1000 mult (2) NOMCT resistors specifies the number B = 0.1 % 0.1 % T3 = 300 min., 300 mult (Lead (Pb)-free) 03 = 7 or 8 of zeros to follow. C = 0.25 % 0.1 % T5 = 500 min., 500 mult (e3) isolated D = 0.5 % 0.1 % TF = Full reel 2500 equal value Example: F = 1 % 0.5 % TS = 100 min., 1 mult resistors 1002 = 10K Z = 0.1 % (1) 0.025 % 1003 = 100K UF = TUBED Historical Part Number example: NOMC16031002Z (for reference purposes only) NOMC 16 03 1002 Z TOLERANCE AND SERIES PINS SCHEMATIC RESISTANCE RATIO TOLERANCE Notes (1) Tolerance available 1K and up (2) Preferred packaging code Revision: 25-Apr-17 3 Document Number: 60007 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: V ishay: NOMC16031003B NOMC16031003BTR NOMC16031003F NOMC16031001BT1 NOMCT16031003AT1 NOMC16031003ZUF NOMC16031002ATS NOMCT16032002AT1 NOMCT16035001AT1 NOMCT16031001AT1 NOMCT16032001AT1 NOMCT16031002AT1 NOMC16031003FT5 NOMC16031003BT5