NOMCA www.vishay.com Vishay Dale Thin Film Molded, 50 mil Pitch, Dual-In-Line Thin Film Resistor, Precision Automotive, AEC-Q200 Qualified, Networks FEATURES • Standard 14 pins and 16 pins counts (0.150" narrow body) JEDEC MS-012 variation AB and AC • Rugged molded case construction • Excellent long term ratio stability (R ± 0.015 %) • Low TCR tracking ± 5 ppm/°C The NOMCA series features a standard 14 pin or 16 pin • AEC-Q200 ESD rated 1 kV (< 10 k) narrow body (0.150") small outline SMT package. The • AEC-Q200 ESD rated 2 kV (>10 k) network is constructed with tantalum nitride resistor film on • Compliant to RoHS Directive 2011/65/EU high purity alumina substrate for improved ESD and moisture protection. Custom schematics are available • Halogen-free according to IEC 61249-2-21 definition consult factory. Note * Pb containing terminations are not RoHS compliant, exemptions may apply TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 5 ABSOLUTE RATIO TOL. 0.10 0.05 SCHEMATICS 1403 1603 The 03 circuit provides a choice of 7 or 8 equal value resistors each connected between a common lead (14 or 16). Custom schematics available. STANDARD RESISTANCE OFFERING (Equal Value Resistors) ISOLATED (03) SCHEMATIC 1 k 2 k 5 k 10 k 20 k 50 k Note • Consult factory for additional values Revision: 24-Feb-12 1 Document Number: 60117 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

NOMCA www.vishay.com Vishay Dale Thin Film STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride (Ta2N) - Pin/Lead Number 14, 16 - Resistance Range 1 k to 50 k each resistor - TCR: Absolute ± 25 ppm/°C (standard) - 55 °C to + 125 °C TCR: Tracking ± 5 ppm/°C (typical) - 55 °C to + 125 °C Tolerance: Absolute ± 0.10 % to ± 1 % + 25 °C Tolerance: Ratio ± 0.05 % to ± 0.1 % + 25 °C Power Rating: Resistor 100 mW ((typical) (03) schematic) Maximum at + 70 °C Power Rating: Package 400 mW/500 mW Maximum at + 70 °C Stability: Absolute R ± 0.05 % 1000 h at + 125 °C Stability: Ratio R ± 0.015 % 1000 h at + 125 °C Voltage Coefficient < 0.1 ppm/V - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range - 55 °C to + 125 °C - Storage Temperature Range - 55 °C to + 150 °C - Noise  - 30 dB - Thermal EMF 0.08 μV/°C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 °C Shelf Life Stability: Ratio R ± 0.002 % 1 year at + 25 °C DIMENSIONS AND IMPRINTING in inches and millimeters 14 16 DIMENSION INCHES MILLIMETERS INCHES MILLIMETERS H 0.235 5.969 0.235 5.969 H E E 0.154 3.911 0.154 3.910 Index Area O 0.340 8.363 0.390 9.906 PIN 1 Locator A 0.063 1.600 0.063 1.600 e 0.050 1.270 0.050 1.270 O h x 45° B 0.015 0.381 0.015 0.381 C A C 0.008 0.203 0.008 0.203 e B L 0.025 0.635 0.025 0.635 L A1 A1 0.006 0.152 0.006 0.152 h 0.015 0.381 0.015 0.381 MECHANICAL SPECIFICATIONS Resistive Element Tantalum nitride (Ta2N) Substrate Material Ceramic Body Molded epoxy Terminals Copper alloy Lead (Pb)-free Option 100 % matte tin plate or Ni/Pd/Au solder free option Revision: 24-Feb-12 2 Document Number: 60117 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

NOMCA www.vishay.com Vishay Dale Thin Film ORDERING INFORMATION CHECK LIST (Customs) Special requirements should be identified in advance, but as a minimum, you should have the following information ready. ELECTRICAL MECHANICAL 1. Resistors, by value and tolerance 1. Maximum allowable seated height (from PC board to top of 2. Reference resistor(s) and matching of which resistors to network) whichreference resistors 2. Special marking concerns 3. Reference by ratio 3. Schematic pin out of package 4. Absolute temperature coefficient of resistivity 5. Temperature tracking of subordinate resistors to reference resistor(s) 6. Maximum operating voltage 7. Resistor power ratings 8. Operating temperature range ENVIRONMENTAL TESTS (Vishay Performance vs. AEC-Q200 Requirements) TYPICAL VISHAY TYPICAL VISHAY LIMITS PER ENVIRONMENTAL TEST CONDITONS PERFORMANCE PERFORMANCE AQEC-Q200 < 10K > 10K Resistance Temperature - 55 °C to + 125 °C ± 25 ppm/°C 15 ppm/°C 15 ppm/°C Characteristic Max. Ambient Temperature + 70 °C + 70 °C + 70 °C at Rated Wattage Max. Ambient Temperature + 150 °C + 150 °C + 150 °C at Power Derating High Temperature Exposure R MIL-STD-202, 108, 1000 h at 125 °C ± 0.20 % 0.005 % 0.012 % JESD22, A104, 1000 cycles, Temperature Cycling R ± 0.25 % 0.004 % 0.004 % - 55 °C to + 125 °C Moisture Resistance R MIL-STD-202 method 106 ± 0.20 % 0.007 % 0.007 % MIL-STD-202, 103, 1000 h at 85 °C, Biased Humidity R ± 0.25 % 0.021 % 0.033 % 85 % RH, 10 % P Life R MIL-STD-202, 108, 1000 h at 125 °C ± 0.10 % 0.012 % 0.029 % Mechanical Shock R MIL-STD-202 method 213, condition C ± 0.25 % 0.001 % 0.001 % MIL-STD-202 method 204, Vibration R ± 0.25 % 0.001 % 0.001 % 10 Hz to 2 kHz Resistance to Soldering Heat R MIL-STD-202, 204, condition B ± 0.10 % - 0.002 % 0.001 % AEC-Q200-002 at 1 kV, human body ± 0.50 % 0.065 % Electrostatic Discharg R AEC-Q200-002 at 2 kV, human body ± 0.50 % 0.170 % Solderability J-STD-002 method B and B1 95 % Acceptable Acceptable Terminal Strenght R AEC-Q200-006 at 1 kg for 60 s Acceptable Acceptable Flame Retardance AEC-Q200-001 Para 4.0 Acceptable Acceptable DERATING CURVE 100 er 100 % = w 80 400 mW (14p) o P 500 mW (16p) d e 60 at R of 40 nt e c 20 e Pr 0 0 70 125 150 Ambient Temperature °C Revision: 24-Feb-12 3 Document Number: 60117 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

NOMCA www.vishay.com Vishay Dale Thin Film GLOBAL PART NUMBER INFORMATION New Global Part Numbering: NOMCA14031002BUF N O M C A 1 4 0 3 1 0 0 2 A T 1 GLOBAL MODEL TOLERANCE AND PINS SCHEMATIC RESISTANCE PACKAGING (4 or 5 digits) RATIO TOLERANCE NOMCA 14 03 = 7 or 8 First 3 digits are Abs. Tol. Ratio TAPE AND REEL (Lead (Pb)-free) 16 isolated significant figures T0 = 100 min., 100 mult (e3) equal value and the last digit A = 0.1 % (1) 0.05 % T1 = 1000 min., 1000 mult (2) resistors specifies the number B = 0.1 % 0.1 % T3 = 300 min., 300 mult of zeros to follow. C = 0.25 % 0.1 % T5 = 500 min., 500 mult D = 0.5 % 0.1 % TF = Full reel 2500 Example: F = 1 % 0.5 % TS = 100 min., 1 mult 1002 = 10K UF = TUBED Notes (1) Tolerance available 1K and up (2) Preferred packaging code Revision: 24-Feb-12 4 Document Number: 60117 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: V ishay: NOMCA14031001ATS NOMCA14031002ATS NOMCA14032001ATS NOMCA14032002ATS NOMCA14035001ATS NOMCA14035002ATS NOMCA16031001ATS NOMCA16031002ATS NOMCA16032001ATS NOMCA16032002ATS NOMCA16035001ATS NOMCA16035002ATS NOMCA14031001AT5 NOMCA14032001AT5 NOMCA14035001AT5 NOMCA14031002AT5 NOMCA14032002AT5 NOMCA14035002AT5 NOMCA16031001AT5 NOMCA16032001AT5 NOMCA16035001AT5 NOMCA16031002AT5 NOMCA16032002AT5 NOMCA16035002AT5