Noise Suppression Products/EMI Suppression Filters > Chip EMIFILr LC Combined Type > Monolithic Type Data Sheet 1 r Chip EMIFIL LC Combined Type Monolithic Type NFL18ST Series (0603 Size) o For your new designs, alternative parts should be used. These parts should be used only for existing design. Please consult with us for details. (cid:1) Dimension (cid:1) Insertion Loss Characteristics (Typical) (50Ω - 50Ω) 0 0.2 min. 0.2 min. (2) 10 (1) (3) ±0.80.1 B) 20 0.25±0.1 01..46(2±±)00..11 0.25±0.1 0.8±0.1 Insertion Loss (d 543000 NNFFLL1188SSTT115077XX11CC33 60 70 1 10 100 1000 5000 (in mm) Frequency (MHz) (cid:1) Equivalent Circuit (cid:1) Packaging Code Packaging Minimum Quantity D 180mm Paper Tape 4000 B Bulk(Bag) 1000 Input Output (1) (3) GND (2) No Polarity. (cid:1) Rated Value (p: packaging code) Operating Part Number Cut-off Frequency Capacitance Inductance Rated Voltage Rated Current Insulation Resistance (min.) Number of Circuits Temperature Range NFL18ST107X1C3p 100MHz 40pF+20%-20% 175nH+20%-20% 16Vdc 100mA 1000M ohm -55°C to 125°C 1 NFL18ST157X1C3p 150MHz 32pF+20%-20% 140nH+20%-20% 16Vdc 100mA 1000M ohm -55°C to 125°C 1 (cid:1) !Caution/Notice !Caution (Rating) Notice Do not use products beyond the rated current and Solderability of Tin plating termination chip might be rated voltage as this may create excessive heat deteriorated when low temperature soldering profile and deteriorate the insulation resistance. where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. o This data sheet is applied for LC Combined CHIP EMIFILr used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2007.11.1 http://www.murata.com/