Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

N C 7 S Z September 2009 1 5 7 — T i n y NC7SZ157 L o ® g TinyLogic UHS 2-Input Non-Inverting Multiplexer i c ® U Features Description H S (cid:131) Broad VCC Operating Range: 1.65V to 5.5V The NC7SZ157 is a single, high performance, 2-to-1 2- CMOS non-inverting multiplexer from Fairchild’s Ultra- In (cid:131) Ultra High-Speed High Speed series of TinyLogic®. The device is p u (cid:131) Power Down High-Impedance Inputs/Outputs fabricated with advanced CMOS technology to achieve t ultra high speed with high output drive while maintaining N (cid:131) Over-Voltage Tolerance Inputs Facilitate 5V to 3V low static power dissipation over a broad VCC operating o Translation range. The device is specified to operate over the 1.65V n - (cid:131) Proprietary Noise/EMI Reduction Circuitry to 5.5V VCC operating range. The inputs and outputs are In (cid:131) Ultra-Small MicroPak™ Packages hvoigltha geims puepd taon 5c.e5 Vw inhdeenp eVnCdCe nits o f 0VVC.C oIpnepruattsin gt oralenrgaete. vert (cid:131) Space-Saving SC70 Package in g M u l t Ordering Information ip l e x Eco e Part Number Top Mark Package Packing Method r Status 3000 Units on NC7SZ157P6X ZF7 RoHS 6-Lead SC70, EIAJ SC-88, 1.25mm Wide Tape & Reel 5000 Units on NC7SZ157L6X B9 RoHS 6-Lead MicroPak™, 1.00mm Wide Tape & Reel 5000 Units on NC7SZ157FHX B9 Green 6-Lead, MicroPak2, 1x1mm Body, .35mm Pitch Tape & Reel For Fairchild’s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html. © 2000 Fairchild Semiconductor Corporation www.fairchildsemi.com NC7SZ157 • Rev. 1.0.2

N C Connection Diagrams 7 S IEEE/IEC Z 1 5 7 — T i n y L o g Figure 1. Logic Symbol i c ® Pin Configurations U H S 2 - I n p u t N o n - Figure 2. SC70 (Top View) Figure 3. MicroPak™ (Top Through View) In v e r t i n g M u l t i p l e x Figure 4. Pin 1 Orientation e r Notes: 1. AAA represents product code top mark (see Ordering Information). 2. Orientation of top mark determines pin one location. 3. Reading the top mark left to right, pin one is the lower left pin. Pin Definitions Pin # SC70 Pin # MicroPak Name Description 1 1 I Data Input 1 2 2 GND Ground 3 3 I Data Input 0 4 4 Z Output 5 5 V Supply Voltage CC 6 6 S Control Input Function Table Inputs Output S I I Z = (I ) • (S) + (I ) • (S) 1 0 0 1 L X L L L X H H H L X L H H X H H = HIGH Logic Level L = LOW Logic Level X = Don’t’ Care © 2000 Fairchild Semiconductor Corporation www.fairchildsemi.com NC7SZ157 • Rev. 1.0.3 2

N C Absolute Maximum Ratings 7 S Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be Z 1 operable above the recommended operating conditions and stressing the parts to these levels is not recommended. 5 In addition, extended exposure to stresses above the recommended operating conditions may affect device 7 reliability. The absolute maximum ratings are stress ratings only. — T Symbol Parameter Min. Max. Unit i n y VCC Supply Voltage -0.5 7.0 V L o VIN DC Input Voltage -0.5 7.0 V g i V DC Output Voltage -0.5 7.0 V c OUT ® IIK DC Input Diode Current VIN ≤ 0.5V -50 mA U H IOK DC Output Diode Current VOUT ≤ -0.5V -50 mA S I DC Output Current ±50 mA 2 OUT - I I or I DC V or Ground Current ±50 mA n CC GND CC p T Storage Temperature Range -65 +150 °C u STG t T Junction Temperature Under Bias +150 °C N J o T Junction Lead Temperature (Soldering, 10 Seconds) +260 °C n L - I SC70-6 180 n v P Power Dissipation at +85°C MicroPak-6 130 mW e D r t MicroPak2-6 120 in g Human Body Model, JEDEC:JESD22-A114 4000 ESD V M Charge Device Model, JEDEC:JESD22-C101 2000 u l ti p l e x Recommended Operating Conditions e r The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol Parameter Conditions Min. Max. Unit Supply Voltage Operating 1.65 5.50 VCC Supply Voltage Data V 1.50 5.50 Retention V Input Voltage 0 5.5 V IN V Output Voltage 0 V V OUT CC T Operating Temperature -40 +85 °C A V at 1.8V ± 0.15V, CC 0 20 2.5V ± 0.2V t, t Input Rise and Fall Times ns/V r f V at 3.3V ± 0.3V 0 10 CC V at 5.0V ± 0.5V 0 5 CC SC70-6 350 θ Thermal Resistance MicroPak-6 500 °C/W JA MicroPak2-6 560 © 2000 Fairchild Semiconductor Corporation www.fairchildsemi.com NC7SZ157 • Rev. 1.0.3 3

N C DC Electrical Characteristics 7 S Z T =+25°C T =-40 to +85°C A A 1 Symbol Parameter VCC Conditions Units 5 Min. Typ. Max. Min. Max. 7 — VIH HVoIGltaHg Lee vel Input 12..6350 ttoo 15..9550 00..7705VVCCCC 00..7750VVCCCC V Tin VIL LVOolWtag Lee vel Input 12..6350 ttoo 51..9550 00..3205VVCCCC 00..2350VVCCCC V yLo g 1.65 1.55 1.65 1.55 i c 2.30 VIN=VIL 2.20 2.30 2.20 ® or VIH IOH= -100µA U 3.00 2.90 3.00 2.90 H S 4.50 4.40 4.50 4.40 HIGH Level 2 VOH Output Voltage 1.65 IOH= -4mA 1.29 1.52 1.29 V -In 2.30 VIN=VIL IOH= -8mA 1.90 2.15 1.90 pu 3.00 or VIH IOH= -16mA 2.40 2.80 2.40 t N 3.00 IOH= -24mA 2.30 3.68 2.30 o 4.50 IOH= -32mA 3.90 4.20 3.80 n- I 1.65 0 0.10 0.10 n v 2.30 VIN=VIL 0 0.10 0.10 e or VIH IOL= 100µA V rt 3.00 0 0.10 0.10 in g 4.50 0 0.10 0.10 LOW Level M VOL Output Voltage 1.65 IOL= 4mA 0.08 0.24 0.24 u 2.30 VIN=VIL IOL= 8mA 0.10 0.30 0.30 ltip 3.00 or VIH IOL= 16mA 0.15 0.40 0.40 V le 3.00 IOL= 24mA 0.22 0.55 0.55 xe 4.5 IOL= 32mA 0.22 0.55 0.55 r Input Leakage IIN Current 0 to 5.50 VIN=5.5V, GND ±0.1 ±1 µA Power Off IOFF Leakage Current 0 VIN or VOUT=5.5V 1 10 µA Quiescent Supply ICC Current 1.65 to 5.50 VIN=5.5V, GND 10 µA © 2000 Fairchild Semiconductor Corporation www.fairchildsemi.com NC7SZ157 • Rev. 1.0.3 4

N AC Electrical Characteristics C 7 S T =+25°C T =-40 to +85°C Z A A 1 Symbol Parameter V Conditions Units Figure CC 5 Min. Typ. Max. Min. Max. 7 — 1.80 ± 0.15 2.5 6.0 11.5 2.5 12.0 T Propagation Delay 2.50 ± 0.20 CL=15pF, 1.2 3.5 6.1 1.2 6.5 in S to Z 3.30 ± 0.30 RL=1MΩ, 0.8 2.6 4.1 0.8 4.5 y L 5.00 ± 0.50 0.5 1.9 3.2 0.5 3.5 o g 1.80 ± 0.15 2.5 5.9 10.0 2.5 10.5 ns i c tPLH, tPHL PInr toop Zag ation Delay 53..0300 ±± 00..5300 CRLL==11M5pΩF,, 10..28 32..56 53..89 10..28 64..12 FFiigguurree 65 UH® 5.00 ± 0.50 0.5 1.9 3.1 0.5 3.3 S 2 Propagation Delay 3.30 ± 0.30 CL=50pF, 1.2 3.2 4.8 1.2 5.2 -I S to Z 5.00 ± 0.50 RL=500Ω, 0.8 2.4 3.8 0.8 4.1 np u Propagation Delay 3.30 ± 0.30 CL=50pF, 1.2 3.2 4.6 1.2 5.0 t In to Z 5.00 ± 0.50 RL=500Ω, 0.8 2.4 3.7 0.8 4.0 N o CIN Input Capacitance 0.00 2 pF n - I CPD PCoawpaecr iDtainscseip(4a)t ion 35..3000 1147 pF Figure 7 nve r Note: ti n 4. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating g current consumption (ICCD) at no output loading and operating at 50% duty cycle. CPD is related to ICCD dynamic M operating current by the expression: ICCD=(CPD)(VCC)(fIN)+(ICCstatic). u lt i p l e x e r Note: 5. C includes load and stray capacitance. L Input PRR=1.0MHz, t =500ns. w Figure 5. AC Test Circuit Figure 6. AC Waveforms Note: 6. Input=AC Waveform; PRR=Variable; Duty Cycle=50%. Figure 7. I Test Circuit CCD © 2000 Fairchild Semiconductor Corporation www.fairchildsemi.com NC7SZ157 • Rev. 1.0.3 5

N C Physical Dimensions 7 S Z 1 SYMM 5 CL 7 2.00±0.20 A 0.65 — 0.50 MIN T 6 4 B in y L PIN ONE o 1.25±0.10 1.90 g i c ® U 1 3 H (0.25) 0.30 S 0.15 0.40 MIN 2 0.65 0.10 A B 1.30 -In LAND PATTERN RECOMMENDATION p 1.30 u t N 10..0800 SEE DETAIL A o n - I n 1.10 v 0.80 e r t C 00..1000 0.10 C in 2.10±0.30 g SEATING M PLANE u l NOTES: UNLESS OTHERWISE SPECIFIED ti p GAGE A) THIS PACKAGE CONFORMS TO EIAJ le PLANE (R0.10) SC-88, 1996. x B) ALL DIMENSIONS ARE IN MILLIMETERS. e 0.25 C) DIMENSIONS DO NOT INCLUDE BURRS r 0.10 OR MOLD FLASH. 0.20 D) DRAWING FILENAME: MKT-MAA06AREV6 0.46 30° 0.26 0° DETAIL A SCALE: 60X Figure 8. 6-Lead, SC70, EIAJ SC-88, 1.25mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. Tape and Reel Specifications Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications: http://www.fairchildsemi.com/products/analog/pdf/sc70-6_tr.pdf. Package Designator Tape Section Cavity Number Cavity Status Cover Type Status Leader (Start End) 125 (Typical) Empty Sealed P6X Carrier 3000 Filled Sealed Trailer (Hub End) 75 (Typical) Empty Sealed © 2000 Fairchild Semiconductor Corporation www.fairchildsemi.com NC7SZ157 • Rev. 1.0.3 6

N C 7 Physical Dimensions S Z 1 2X 5 7 0.05 C 1.45 B — 2X (1) 0.05 C T i n y L (0.49) 1.00 o 5X g (0.75) ic ® (0.52) U TOP VIEW A 1X H S 0.55MAX (0.30) 2 PIN 1 6X -I 0.05 C n p 0.05 RECOMMENED u 0.00 t LAND PATTERN N 0.05 C o C 0.45 n 0.25 00..10006X 0.35 -In 6X 0.15 v DETAIL A 1.0 e 0.10 C B A r 0.05 C 0.40 ti 0.30 n g 0.35 M 5X 0.25 u l t i p 00..4300 5X DETAIL A le 0.075 X 45 PIN 1 TERMINAL x (0.05) 0.5 (0.13) CHAMFER er 6X 4X BOTTOM VIEW Notes: 1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD 2. DIMENSIONS ARE IN MILLIMETERS 3. DRAWING CONFORMS TO ASME Y14.5M-1994 MAC06AREVC Figure 9. 6-Lead, MicroPak™, 1.0mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. Tape and Reel Specifications Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications: http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf. Package Designator Tape Section Cavity Number Cavity Status Cover Type Status Leader (Start End) 125 (Typical) Empty Sealed L6X Carrier 5000 Filled Sealed Trailer (Hub End) 75 (Typical) Empty Sealed © 2000 Fairchild Semiconductor Corporation www.fairchildsemi.com NC7SZ157 • Rev. 1.0.3 7

N C 7 Physical Dimensions S Z 1 5 7 — T i n y L o g i c ® U H S 2 - I n p u t N o n - I n v DETAIL A e r t i n g M u l t i p l e 5X x e r Figure 10. 6-Lead, MicroPak2, 1x1mm Body, .35mm Pitch Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. Tape and Reel Specifications Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications: http://www.fairchildsemi.com/packaging/MicroPAK2_6L_tr.pdf. Package Designator Tape Section Cavity Number Cavity Status Cover Type Status Leader (Start End) 125 (Typical) Empty Sealed FHX Carrier 5000 Filled Sealed Trailer (Hub End) 75 (Typical) Empty Sealed © 2000 Fairchild Semiconductor Corporation www.fairchildsemi.com NC7SZ157 • Rev. 1.0.3 8

N C 7 S Z 1 5 7 — T i n y L o g i c ® U H S 2 - I n p u t N o n - I n v e r t i n g M u l t i p l e x e r © 2000 Fairchild Semiconductor Corporation www.fairchildsemi.com NC7SZ157 • Rev. 1.0.3 9

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free ON Semiconductor Website: www.onsemi.com Literature Distribution Center for ON Semiconductor USA/Canada 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Europe, Middle East and Africa Technical Support: Order Literature: http://www.onsemi.com/orderlit Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Phone: 421 33 790 2910 Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Japan Customer Focus Center For additional information, please contact your local Email: orderlit@onsemi.com Phone: 81−3−5817−1050 Sales Representative © Semiconductor Components Industries, LLC www.onsemi.com www.onsemi.com 1

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: O N Semiconductor: NC7SZ157L6X NC7SZ157P6X NC7SZ157FHX