MWA100 Series 100 Watt Medical Desktop Power Supply High Efficiency High Power Density 4.8W/in3 Lifetime Expectation >5 years Hold­up Time >24ms at full load EISA, CEC Compliant Floating Output Medical Approval ­ EN60601­1 Class I  3rd Edition Elpac Part Output Output Peak Total Typical Number Voltage Current Current1 Regulation2 Efficiency3 MWA100012A­12A 12.0V 8.3A 10.0A ±5% 88% MWA100015A­12A 15.0V 6.7A 8.0A ±5% 89% MWA100018A­12A 18.0V 5.6A 6.7A ±5% 89% MWA100024A­12A 24.0V 4.2A 5.0A ±5% 89% Notes 1 Maximum peak load (120W) lasting 500ms with a maximum 10% duty cycle. 2 Includes initial setting, line regulation, load regulation, and thermal drift. 3 Typical at 115VAC (including output cable).

Input Input Voltage 85 ­ 264VAC 100 ­ 240VAC Nominal Input Frequency 47 ­ 63Hz Input Current <2.3A rms Inrush Current <37A at 230VAC cold start Zero Load Power Consumption <0.5W Earth Leakage Current (Typical) <150µA @ 132VAC @ 60H <250µA @ 264VAC @ 60H Patient Leakage Current <50µA @ 132VAC @ 60H <80µA @ 264VAC @ 60H Output Output Voltage See Table Total Regulation +/­5% Minimum Load No minimum load required Start­Up Delay <1s Hold­Up Time >24ms at any input voltage Ripple & Noise <1% pk­pk * Over Voltage Protection 110­135% Over Temperature Protection Active ­ Recoverable; plus Passive ­ Non Recoverable Over Current Protetion 120 ­ 180% Short Circuit Protection shutdown, auto­restart (hiccup mode) Notes * Ripple and noise measured with 20MHz bandwidth; 10μF tantalum capacitor in parallel with a 0.1μF ceramic capacitor. General Efficiency Avg Efficiency 88.9% @ 115VAC; 90.6% @ 230VAC MTBF min. 200,000 hours demonstrated Size 5.19" (132mm) x 3.07" (78mm) x 1.34" (34mm) Weight 1.1 lbs (0.50 kg) Power Density 4.8W/in3

Environmental Operating Temperature 0 – 60°C (Full load to 40°C, derate linearly to 50% load at 60°C) Storage Temperature ­40°C to +85°C Relative Humidity 5­95%, non­condensing Cooling Natural Convection Vibration All units production tested to 19.6m/s2 EMC & Safety Emissions FCC class B, CISPR11 class B EN61000­3­2, ­3 Immunity EN61000­4­2, ­3, ­4, ­5, ­6, ­8, ­11 Certified by TUV to the following: cTUVus UL 60601­1 CAN/CSA­22.2 No.601.1­M90 CB per IEC60601­1 2nd and 3rd Edition CE marked to LVD Input Configuration Standard Input Cable Not Provided Connection on Power Supply Body IEC 320 C14 Receptacle Output Configuration (12V) Standard Output Cable 4 ft. Cord Size 2x16awg Connector (PSU side) Switchcraft DIN­8, P/N 15BL8MX (male pins) Mating Connector Switchcraft 62GB8FX or equivalent

Output Configuration (15V, 18V 24V) Standard Output Cable 6 ft. Cord Size 2x16awg Connector (PSU side) Switchcraft DIN­8, P/N 15BL8MX (male pins) Mating Connector Switchcraft 62GB8FX or equivalent Output Pin Assignments Pin 1 +V1 Pin 2 +V1 Pin 3 Return Pin 4 +V1 Pin 5 Return Pin 6 +V1 Pin 7 Return Pin 8 Return

None