Scotchlok™ Terminals W MU18-4FL thru MU10-14FL C L Locking Fork, Non-Insulated, Butted Seam E Data Sheet Wire Max Product Range Stud Lock Barrel Barrel Number (AWG) Size Width W C L E Thickness Length I.D. MU18-4FL 22-18 4 0.27 0.25 0.25 0.68 0.50 0.030 0.25 0.070 MU18-6FL 22-18 6 0.27 0.25 0.25 0.68 0.50 0.030 0.25 0.070 MU18-8FL 22-18 8 0.34 0.30 0.25 0.68 0.50 0.030 0.25 0.070 MU18-10FL 22-18 10 0.35 0.32 0.25 0.68 0.50 0.030 0.25 0.070 MU14-4FL 16-14 4 0.27 0.25 0.25 0.68 0.50 0.030 0.25 0.090 MU14-6FL 16-14 6 0.27 0.25 0.25 0.68 0.50 0.030 0.25 0.090 MU14-8FL 16-14 8 0.34 0.30 0.25 0.68 0.50 0.030 0.25 0.090 MU14-10FL 16-14 10 0.35 0.32 0.25 0.68 0.50 0.030 0.25 0.090 MU14-14FL 16-14 1/4 0.48 0.43 0.40 0.90 0.65 0.030 0.25 0.090 MU10-6FL 12-10 6 0.30 0.28 0.28 0.73 0.53 0.040 0.25 0.135 MU10-8FL 12-10 8 0.35 0.32 0.28 0.73 0.53 0.040 0.25 0.135 MU10-10FL 12-10 10 0.36 0.32 0.28 0.73 0.53 0.040 0.25 0.135 MU10-14FL 12-10 1/4 0.48 0.43 0.44 0.94 0.69 0.040 0.25 0.135 Installation Information (cid:2)WARNING LISTED314R CANADIAN STANDARDS Turn power off before installing or removing terminal.All electrical work should be done according to appropriate electrical codes. ASSOCIATION UNDERWRITERS STANDARD NO. C22.2 LABORATORIES NO. 0. 65 ULListed and CSACertified for use on stranded copper STANDARD NO. UL 486A 3M FILE NO. E23438 3M FILE NO. LR22190 (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool:TH-440,TH-450 (scissor style),or TR-490 Specifications (ratchet style) hand tools. Wire Size: See Table Above Barrel Seam: Butted Barrel Crimp (Required) Max. Current: Same as Wire Terminal Material: ETP Copper Plating: Tin

Engineering Specification Crimp-type terminals shall,electrically and mechanically, The non-insulated,butted seam locking fork terminal shall connect to a pre-stripped end of a stranded copper wire: be tin-plated,annealed copper,with the tongue having a and have a flat tongue portion with a central opening for specified stud slot (size 4 thru 1/4 in.) and a butted seam mounting around a screw or stud. barrel with a beveled I.D. for ease of stranded wire entry, sized for a specified (AWG) wire range (22-18,16-14, The terminal line shall offer tongue variations in hole 12-10). (stud) size (6,8 10,etc.) and configuration (ring,fork, block fork,flanged block fork,locking fork,etc.): and Non-insulated terminals shall be ULListed and CSA barrel variations in wire (AWG) size (22-18,16-14,12-10, Certified. etc.) and construction (non-insulated brazed seam,vinyl insulated butted seam,nylon insulated with insulation grip, etc.). The terminal line shall have regulatory agency coverage (UL Listing,CSA Certification). The terminal tongue shall be marked with the wire range and manufacturer’s symbol ((cid:2)). 3M and Scotchlok are trademarks of 3M IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty;Limited Remedy;Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,BUT NOT LIMITED TO,ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law,3M will not be liable for any loss or damage arising from this 3M product,whether direct,indirect,special,incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin,TX 78726-9000 Litho in USA. http://www.3M.com/elpd ©3M 2002 78-8126-0484-7-A

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: 3 M: MU10-14FLK (BULK) MU14-14FLK (BULK) MU10-8FLK MU14-6FLK MU14-10FLK MU18-4FLK MU18-8FLK MU18-10FLK