Cree MT-G2 Series on Board Cree MT-G2 Series The first EasyWhite LED array built on the SC³ Technology Platform, Cree's XLamp MT-G2 LED pushes performance limits to redefine lumen levels and efficacy while delivering the industry’s best color consistency and superior optical control. The MT- G2 LED delivers up to 1987 lumens in cool white and 1735 lumens in warm white, both at 18.5 watts, 85°C. FEATURES APPLICATIONS > Cree EasyWhite color temp from 2700K to 5000K > Directional > 85°C binning and characterization > Downlight > UL- recognized component (E349212) > Electrically Neutral Thermal Path FLUX CHARACTERISTICS @ 85°C COLOR CCT (TYP.) MIN.FLUX (LM) @350MA KIT USED Warm White 2700K 600 J027F Neutral White 5000K 750 N050F CHARACTERISTICS UNIT MINIMUM TYPICAL MAXIMUM Viewing angle (FWHM) degrees 115 Effective Thermal Resistance, Junction to Solder Point °C/W 1.5 ESD classification (HBM per Mil-Std-883D) Class 2 LED junction temperature °C 150 DC forward current (6V) mA 3000 DC forward current (9V) mA 2000 DC forward current (36V) mA 500 Forward voltage (6V, 1000 mA, 85 °C) V 5.7 Forward voltage (6V, 1000 mA, 25 °C) V 7 Forward voltage (9V, 735 mA, 85 °C) V 8.55 Forward voltage (9V, 735 mA, 25 °C) V 10.5 Forward voltage (36V, 185 mA, 85 °C) V 34.2 Forward voltage (36V, 185 mA, 25 °C) V 42 Temperature coefficient of voltage (6V) mV/°C -4 Temperature coefficient of voltage (9V) mV/°C -6 Temperature coefficient of voltage (36V) mV/°C -26 Reverse voltage V -5 Reverse Current A 0.1 It is highly recommended for the user to review the CREE Series page for additional and most recent technical data at: http://www.cree.com/led-components-and-modules/products/xlamp/arrays-directional/xlamp-mtg2-easywhite Global Headquarters, 3 Northway Lane North, Latham, NY 12110, USA www.marktechopto.com TOLL FREE: 1-800-984-5337 • PHONE: 518-956-2980 • FAX: 518-785-4725 • EMAIL: info@marktechopto.com

Cree MT-G2 Series on Board * Exceeding maximum ratings may damage the LED and cause potential safety hazards. * Elevated operating temperatures can be expected to negatively impact the service life (lumen output) * All data is related to entire assembly. Data reflects statistical mean values. Actual data may differ depending on variances in the manufacturing process. * End users need to take into account the lumen depreciation as the temperature rises with various thermal solutions installed. Note 1: Using continuously under elevated loads (i.e. the application of high temperature/current/voltage or a significant change in temperature, etc.) may cause this product to significantly decrease in reliability even if the operating conditions are within the absolute maximum ratings. Note 2: The thermal resistance from the LED junction to ambient temperature, Rth(j-a), should be kept below 10°C/W so that the LED is not exposed to a condition beyond the absolute maximum ratings. Note 3: The temperature of the LED assembly must be measured at the TC-point according to EN60598-1 in a thermally constant status with a temperature sensor or a temperature sensitive label. Hardware (not included) > Mount with #4 Machine Screws. > 16AWG Maximum Wire Gauge. > Use only with constant current power supplies. PCB Fabrication > Layer Count: 1 > Core Material: 6061-T6 Aluminum > Single Layer Copper Weight: 1oz > Solder Mask: White > Finishing Plating: Pb Free HASL Global Headquarters, 3 Northway Lane North, Latham, NY 12110, USA www.marktechopto.com TOLL FREE: 1-800-984-5337 • PHONE: 518-956-2980 • FAX: 518-785-4725 • EMAIL: info@marktechopto.com