8LT Series Description Applications High density connectors for all military • High density connector from 1 to and aeronautical purposes. 128contacts • Sizes 22D, 20, 16, 12, # 16 coax and # 8 triax Standards • Bayonet locking system • 100% scoop proof MIL-C 38999 Series I - QPL approved NFC 93422 HE 308 DTAT-C 5935 X 0005 (HE 308 standard) GAM/T1 list Characteristics Electrical Climatic Mechanical Test voltage (Vrms) • Temperature range : - cadmium plating (B) : -65°C +175°C • Shell : aluminum alloy Service sea level at 21000 m - nickel plating (F) : -65°C +200°C M 1300 800 • Plating : • Sealing : mated connectors I 1800 1000 - olive green cadmium (B) - differential pressure 2 bars II 2300 1000 - leakage ≤16 cm3/hr - nickel (F) • Contact resistance : • Salt spray to : • Insulator : thermoplastic resistance of wire included in measurement : MIL STD 1344 method 1001 • Grommet and seal : silicone elastomer size 22D : 14.6 mΩ size 20 : 7.3 mΩ - 500 hours (version B) • Contact : copper alloy size 16 : 3.8 mΩ size 12 : 1.7 mΩ - 48 hours (version F) • Insulation resistance : ≥5000 MΩ(at 500 Vdc) • Plating : gold over nickel NFC 93422 • Contact rating : • Endurance : 500 cycles - 48 hours (version F) size 22D : 5 A size 20 : 7.5 A • Shock : 300 g during 3 ms and MIL-S901 size 16 : 13 A size 12 : 23 A • Damp heat : grade A • Shell continuity : MIL-C 38999 : 10 cycles 24 hrs - olive green plating : 2.5 mΩ NFC 93422 : 56 days • Vibration : sine 10 to 2000 H 30 g random - nickel plating : 1 mΩ 100 to 300Hz - 5 (g2/Hz) • Shielding : - 90 dB to 100 MHz Resistance to fluids • Contact retention : (mini force in N) - 50 dB to 10000 MHz size 22 D : 45 N size 20 : 67 N • Triaxial contact : # 8 To MIL-C 38999 : size 16 : 110 N size 12 : 110 N - bandwidth : 0 - 20 MHz • MIL-L 7808 • MIL-L 23699 - voltage rating : 500 Vac Max. • MIL-H 5606 • MIL-A 8243 size 8 : 110 N 125 Vac at 21000 m • MIL-C 25769 • MIL-T 5624 (JP5) - voltage drop : • hydraulic fluids • solvents inner and middle contact ≤55 mV under 1A outer contact ≤75 mV under 12A To NFC 93422 : F46 - F54 - 0/180 - H515 - H542 - XH45 Connectors ordering information FCI Souriau part numbers basic series 8LT 0 - 13 B 35 P N shell type 0 - square flange receptacle 3 - square flange receptacle (rear mounting) 2 - square flange receptacle not accepting backshell 7 - jam nut receptacle 1 - cable connecting receptacle 5 - plug with RFI shielding designator — - connectors with standard crimp contacts L - receptacle with long spill (male and female # 22D) C - receptacle with short spill (male and female # 22D, # 20, # 16) T - receptacle with male contacts size 20 for wire wrap (2 wraps) W - receptacle with male contacts size 22 for wire wrap (3 wraps) shell size 09-11-13-15-17-19-21-23-25 plating F - nickel B - olive green cadmium (MIL-C 38999 - HE 308) contact layout - see table p 120 contact type P - male S- female A - male connector supplied less contact or with specific contacts B - female connector supplied less contact or with specific contacts polarization N - normal A-B-C-D - see table p 77 Note : connectors supplied with standard contacts 74

8LT Series MIL-C 38999 part numbers basic series MS 27466 T 13 B 35 P • shell type 27466 - square flange receptacle (front mounting) 27656 - square flange receptacle (rear mounting) 27468 - jam nut receptacle 27467 - plug with RFI shielding class T - with thread for backshell, supplied less backshell shell size 09-11-13-15-17-19-21-23-25 plating B - olive green cadmium F- nickel contact layout - see table p 120 contact type P - male A- male connector supplied less contact or with specific contacts S - female B- female connector supplied less contact or with specific contacts polarization N - Normal (not included in part number) A-B-C-D -see table p 77 Note : connectors supplied with MIL-C contacts HE 308 part numbers basic series HE308 - 00 T 13 - 35 P N 7 M • shell type 00 - square flange receptacle 07 - jam nut receptacle 06 - plug with RFI shielding 11 - jam nut receptacle with straight spill contacts class T - sealed shell size 09-11-13-15-17-19-21-23-25 contact layout - see table p 120 contact type P - male S - female polarization N - normal A-B-C-D -see table p 77 plating 6 - nickel 7 - olive green cadmium contractual specification specification - connector supplied with contact : (without specification) L - connector supplied without contact Backshells ordering information FCI Souriau part numbers basic series 8LST 103 G 01 • shell size 09 11 13 15 17 19 21 23 25 index number 101 102 103 104 105 106 107 108 109 plating B - olive green cadmium F- nickel backshell type 01 - backnut 03- elbow cable clamp 02 - straight cable-clamp 07- backshell for screen termination and heatshrink boot suffix for backshell type 07 only 1 - for receptacle type 0 (shells 09 to 25) 2- for receptacle type 7 (shells 09 to 25) - for plug type 5 (shells 09 to 23) - for plug type 5 (shell 25 only) HE 308 part numbers basic series HE 308- 13 13 1 7 M backshell type 13 - backshell for screen termination and heatshrink boot shell size 09-11-13-15-17-19-21-23-25 designator 1 - for receptacle type 0 (shells 09 to 25) 2- for receptacle type 7 (shells 09 to 25) - for plug type 5 (shells 09 to 23) - for plug type 5 (shell 25 only) plating 6 - nickel 7 - olive green cadmium contractual specification 75

8LT Series Cross reference list : FCI Souriau part numbers, HE 308 and MIL-C 38999 standards FCISouriau NFC 93422 / HE 308 MIL-C 38999 Series I Designation 8LT1 - •• B ••PS (cid:2)(cid:2) cable connecting receptacle 8LT0 - •• B ••P (cid:2)(cid:2) HE308-00T •• - ••P (cid:2)(cid:2) 7 MS27466T •• B ••P(cid:2)(cid:2) square flange receptacle S S S 8LT3 - •• B ••PS (cid:2)(cid:2) MS27656T •• B ••PS(cid:2)(cid:2) square flange receptacle (rear mounting) 8LT7 - •• B ••PS (cid:2)(cid:2) HE308-07T •• - ••PS (cid:2)(cid:2) 7 MS27468T •• B ••P (cid:2)(cid:2) jam nut receptacle 888LLLTTT037 --- •••••• FFF ••••••PSPSP (cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2) HHEE330088--0007TT •••• -- ••••PSPS (cid:2)(cid:2)(cid:2)(cid:2) 66 MMMSSS222777464656668TTT •••••• FFF ••••••SPSP(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2) ssjaqqmuu aanrrueet ff llraaenncggeeep trraeecccleeeppttaaccllee (rear mounting) S S 8LT1 - •• F ••P (cid:2)(cid:2) cable connecting receptacle S 8LT2 - •• B ••P (cid:2)(cid:2) square flange receptacle not accepting backshell S 8LT2 - •• F ••P (cid:2)(cid:2) square flange receptacle not accepting backshell 88LLTT55 -- •••• BF ••••PSSPS(cid:2)(cid:2)(cid:2)(cid:2) HHEE330088--0066TT •••• -- ••••PSPS (cid:2)(cid:2)(cid:2)(cid:2) 67 MMSS22774466TT •••• FB ••••PSPS (cid:2)(cid:2)(cid:2)(cid:2) pplluugg wwiitthh RRFFII sshhiieellddiinngg 8LST••• G01 backnut 8LST••• G02 HE308-11 •• 27 straight cable clamp 8LST••• G03 HE308-12 •• 27 elbow cable clamp 8LST••• B071 HE308-13 •• 17 backshell for screen termination and heatshrink sleeving 8LST••• B072 HE308-13 •• 27 backshell for screen termination and heatshrink sleeving 8LST••• B01 M85049/27-••W backnut 8LST••• B02 straight cable clamp 8LST••• B03 elbow cable clamp 8LST••• F01 M85049/27-••N backnut 8LST••• F02 HE308-11 •• 26 straight cable clamp 8LST••• F03 HE308-12 •• 26 elbow cable clamp 8LST••• F071 HE308-13 •• 16 backshell for screen termination and heatshrink sleeving 8LST••• F072 HE308-13 •• 26 backshell for screen termination and heatshrink sleeving 8LTE04G •• HE308-B00 •• 7 cap for square flange receptacle 8LTE06G •• HE308-B07 •• 7 cap for jam nut receptacle 8LTE04F •• HE308-B00 •• 6 cap for square flange receptacle 8LTE06F •• HE308-B07 •• 6 cap for jam nut receptacle 8LTF05G •• HE308-B16 •• 7 cap for plug 8LTF07G •• HE308-B06 •• 7 cap for plug 8LTF05F •• HE308-B16 •• 6 cap for plug 8LTF07F •• HE308-B06 •• 6 cap for plug M39029/58-360 M39029/58-360 male contact # 22D M39029/58-363 M39029/58-363 male contact # 20 M39029/58-364 M39029/58-364 male contact # 16 M39029/58-365 M39029/58-365 male contact # 12 M39029/56-348 M39029/56-348 female contact # 22D M39029/56-351 M39029/56-351 female contact # 20 M39029/56-352 M39029/56-352 female contact # 16 M39029/56-353 M39029/56-353 female contact # 12 8599-0988 M39029/90-529 male triaxial contact # 8 8599-0998 M39029/91-530 female triaxial contact # 8 8660-212 MS27488-22 filler plug # 22D 8522-389A MS27488-20 filler plug # 20 8522-390A MS27488-16 filler plug # 16 8522-391A MS27488-12 filler plug # 12 8599-0308 dummy contact # 8 8599-0022 M81969/14-01 plastic tool for contact # 22D 8522-20 M81969/14-10 plastic tool for contact # 20 8522-16 M81869/14-03 plastic tool for contact # 16 8522-12 M81969/14-04 plastic tool for contact # 12 8660-197 tool for contact # 8 76

8LT Series Polarization Polarization is determined by the master keyway position. The secondary keyway positions remain fixed. view from front face of receptacle view from front face of plug Service Number of contacts Angles in degrees Contacts Shell size layout M I II # 22D # 20 # 16 # 12 # 8 N A B C D 09 09-35 X 6 95 77 - - 113 09-98 X 3 95 77 - - 113 11-35 X 13 95 81 67 123 109 11-98 X 6 95 81 67 123 109 11 11-01 X 1 95 81 67 123 109 11-05 X 5 95 81 67 123 109 11-04 X 4 95 81 67 123 109 13-35 X 22 95 75 63 127 115 13 13-98 X 10 95 75 63 127 115 13-08 X 8 95 75 63 127 115 15-35 X 37 95 74 61 129 116 15-19 X 19 95 74 61 129 116 15 15-05 X 5 95 74 61 129 116 15-97 X 8 4 95 74 61 129 116 15-18 X 18 95 74 61 129 116 17-35 X 55 95 77 65 125 113 17-26 X 26 95 77 65 125 113 17-06 X 6 95 77 65 125 113 17 17-08 X 8 95 77 65 125 113 17-99 X 21 2 95 77 65 125 113 17-75 X 2 95 77 65 125 113 19-35 X 66 95 77 65 125 113 19 19-32 X 32 95 77 65 125 113 19-11 X 11 95 77 65 125 113 21-35 X 79 95 77 65 125 113 21-41 X 41 95 77 65 125 113 21 21-16 X 16 95 77 65 125 113 21-11 X 11 95 77 65 125 113 21-39 X 37 2 95 77 65 125 113 21-75 4 95 77 65 125 113 23-35 X 100 95 80 69 121 110 23 23-53 X 53 95 80 69 121 110 23-21 X 21 95 80 69 121 110 25-35 X 128 95 80 69 121 110 25-61 X 61 95 80 69 121 110 25-46 X 40 4 2 95 80 69 121 110 25 25-19 X 19 95 80 69 121 110 25-29 X 29 95 80 69 121 110 25-43 X 23 20 95 80 69 121 110 25-24 X 12 12 95 80 69 121 110 77

8LT Series Dimensions Plug type 5 L1 ØD1 shell size 09 11 13 15 17 19 21 23 25 21.80 25.00 29.00 32.50 35.70 38.50 41.70 44.85 48.00 D 1 Max .858 .984 1.142 1.280 1.406 1.516 1.642 1.766 1.890 A 31.32 31.32 31.32 31.32 31.32 31.32 31.32 31.32 31.32 L1 Max 1.233 1.233 1.233 1.233 1.233 1.233 1.233 1.233 1.233 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 D2 Max .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 6.96 10.46 13.36 16.53 19.71 22.40 25.56 28.75 31.93 D3 Max .274 .412 .526 .651 .776 .882 1.006 1.132 1.257 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 L2 Max .445 .445 .445 .445 .445 .445 .445 .445 .445 L3-L5-L8-L11 36.66 36.66 36.66 36.66 36.66 36.66 36.66 36.66 36.66 plug backshell assembly overall length 13.54/.533 Max. L3 Max 1.443 1.443 1.443 1.443 1.443 1.443 1.443 1.443 1.443 Detail A : 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 D4 Max .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 sealing boot used for triaxial ≠8 Contacts only 1.40 1.40 2.40 5.60 5.60 8.80 11.90 15.10 15.10 min .055 .055 .094 .220 .220 .346 .469 .594 .594 Backshells D5 3.20 4.80 6.40 9.50 12.70 15.90 19.10 22.20 25.40 Max L2 .126 .189 .252 .374 .500 .626 .752 .874 1.000 21.03 22.63 25.81 28.98 30.56 37.31 37.31 42.06 44.45 F Max .828 .891 1.016 1.141 1.203 1.469 1.469 1.656 1.750 Backnut ØD2 ØD3 L4 Max 22.8.2725 22.8.2725 22.8.2725 218.1.5275 218.1.5275 218.1.5275 218.1.5275 311.2.7550 311.2.7550 type 01 47.22 48.02 49.52 55.92 59.42 59.42 59.42 59.42 59.42 L5 Max L3 1.859 1.891 1.950 2.202 2.339 2.339 2.339 2.339 2.339 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 D6 Max .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 3.20 4.00 4.80 5.50 6.40 7.90 9.50 10.30 14.30 min .126 .157 .189 .217 .252 .311 .374 .406 .563 D7 Ø for flange Max. 6.40 9.50 11.10 14.30 15.90 19.10 22.20 23.80 25.40 .252 .374 .437 .563 .626 .752 .874 .937 1.000 L4 35.32 35.32 37.30 41.67 46.04 46.45 48.43 51.98 54.78 L6 Max. 1.391 1.391 1.469 1.641 1.813 1.829 1.907 2.046 2.157 Straight 25.40 26.19 27.79 30.96 32.54 34.14 34.93 36.53 43.66 cable-clamp L7 Max type 02 ØD4 ØD5 F 610.0.6080 610.0.6381 612.0.6964 617.2.0139 711.2.4801 711.3.8414 713.3.7795 717.4.3348 810.7.1149 L8 Max 2.389 2.389 2.467 2.639 2.811 2.827 2.905 3.045 3.155 20.20 23.20 26.20 29.20 32.20 35.20 39.20 42.20 45.20 L5 D8 Max .795 .913 1.031 1.150 1.268 1.386 1.543 1.661 1.780 6.90 9.60 12.70 14.80 17.90 19.90 23.10 26.20 28.80 min .272 .378 .500 .583 .705 .783 .909 1.031 1.134 D9 L6 Max 7.00 9.70 12.80 14.90 18.00 20.00 23.20 26.30 28.90 .276 .382 .504 .587 .709 .787 .913 1.035 1.138 16.00 18.90 22.10 25.30 28.50 31.50 34.70 37.90 41.00 D10 Max D6 .630 .744 .870 .996 1.122 1.240 1.366 1.492 1.614 Ø 27.80 27.80 27.80 29.80 29.80 30.80 34.60 34.60 - type 1 1.094 1.094 1.094 1.173 1.173 1.213 1.362 1.362 - Elbow L7 L9 - - - - - - - - 33.50 cable-clamp type 2 - - - - - - - - 1.319 type 03 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40 L10 Max ØD7 .134 .134 .134 .134 .134 .134 .134 .134 .134 L8 52.22 52.22 52.22 54.22 54.22 55.22 59.02 59.02 59.02 L 11 Max 2.056 2.056 2.056 2.135 2.135 2.174 2.324 2.324 2.324 Ø for flange L9 Backshell for sacnrde ehne atetsrhmriinnka tbioonot ØD8 ØD9 ØD10 type 07 L10 L11 78

8LT Series Receptacle type 0 L1 L2 B1 shell size 09 11 13 15 17 19 21 23 25 4 holes ØJ 24.25 26.60 29.00 31.35 33.75 36.90 40.10 43.25 46.50 B1 Max .955 1.047 1.142 1.234 1.329 1.453 1.579 1.703 1.831 A 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 38.10 E1 ØD1 E1 14.7.5139 17.8.7182 21.9.5096 24.9.7679 217.0.9642 310.1.6566 313.2.8530 317.3.0705 410.5.1080 D1 .572 .700 .850 .975 1.100 1.207 1.332 1.457 1.582 3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.73 3.73 J .128 .128 .128 .128 .128 .128 .128 .147 .147 L3 Max. panel thickness 2.50/.098 16.05 16.05 16.05 16.05 16.05 16.05 15.29 15.29 15.29 L1 Max L5-L7-L10-L13 .632 .632 .632 .632 .632 .632 .602 .602 .602 receptacle backshell assembly overall length 13.49 13.49 13.49 13.49 13.49 13.49 13.49 13.49 13.49 L2 Max .531 .531 .531 .531 .531 .531 .531 .531 .531 13.39/.527Max 2.48 2.48 2.48 2.48 2.48 2.48 3.24 3.24 3.24 Detail A : L3 Max .098 .098 .098 .098 .098 .098 .128 .128 .128 sfoera tlirniagx ibaol o≠t 8u sCeodn tacts only D2 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 6.96 10.46 13.36 16.53 19.71 22.40 25.56 28.75 31.93 Backshells D3 Max .274 .412 .526 .651 .776 .882 1.006 1.132 1.257 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 L4 Max L4 .445 .445 .445 .445 .445 .445 .445 .445 .445 18.83 18.83 18.83 18.83 18.83 18.83 18.83 18.83 18.83 L5 Max .741 .741 .741 .741 .741 .741 .741 .741 .741 Backnut ØD2 ØD3 D4 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 type 01 1.40 1.40 2.40 5.60 5.60 8.80 11.90 15.10 15.10 min L5 .055 .055 .094 .220 .220 .346 .469 .594 .594 D5 3.20 4.80 6.40 9.50 12.70 15.90 19.10 22.20 25.40 Max .126 .189 .252 .374 .500 .626 .752 .874 1.000 21.03 22.63 25.81 28.98 30.56 37.31 37.31 42.06 44.45 F Max Ø for flange .828 .891 1.016 1.141 1.203 1.469 1.469 1.656 1.750 22.22 22.22 22.22 28.57 28.57 28.57 28.57 31.75 31.75 L6 Max .875 .875 .875 1.125 1.125 1.125 1.125 1.250 1.250 L6 29.39 30.19 31.69 38.09 41.59 41.59 41.59 41.59 41.59 L7 Max Straight 1.157 1.189 1.248 1.500 1.637 1.637 1.637 1.637 1.637 cable-clamp 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 type 02 ØD4 ØD5 F D6 Max .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 3.20 4.00 4.80 5.50 6.40 7.90 9.50 10.30 14.30 min .126 .157 .189 .217 .252 .311 .374 .406 .563 D7 L7 Max 6.40 9.50 11.10 14.30 15.90 19.10 22.20 23.80 25.40 .252 .374 .437 .563 .626 .752 .874 .937 1.000 35.32 35.32 37.30 41.67 46.04 46.45 48.43 51.98 54.78 L8 Max 1.391 1.391 1.469 1.641 1.813 1.829 1.907 2.046 2.157 L8 25.40 26.19 27.79 30.96 32.54 34.14 34.93 36.53 43.66 L9 Max 1.000 1.031 1.094 1.219 1.281 1.344 1.375 1.438 1.719 42.85 42.85 44.83 51.00 53.57 53.98 55.96 59.51 62.31 Elbow D6 L10 Max 1.687 1.687 1.765 2.008 2.109 2.125 2.203 2.343 2.453 Ø cable-clamp 20.20 23.20 26.20 29.20 32.20 35.20 39.20 42.20 45.20 D8 Max type 03 L9 .795 .913 1.031 1.150 1.268 1.386 1.543 1.661 1.780 6.90 9.60 12.70 14.80 17.90 19.90 23.10 26.20 28.80 min .272 .378 .500 .583 .705 .783 .909 1.031 1.134 D9 ØD7 Max 7.00 9.70 12.80 14.90 18.00 20.00 23.20 26.30 28.90 .276 .382 .504 .587 .709 .787 .913 1.035 1.138 L10 16.00 18.90 22.10 25.30 28.50 31.50 34.70 37.90 41.00 D10 Max .630 .744 .870 .996 1.122 1.240 1.366 1.492 1.614 Ø for flange type 1 27.80 27.80 27.80 29.80 29.80 30.80 34.60 34.60 34.60 1.094 1.094 1.094 1.173 1.173 1.213 1.362 1.362 1.362 L11 - - - - - - - - - type 2 - - - - - - - - - L11 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40 Backshell for L12 Max .134 .134 .134 .134 .134 .134 .134 .134 .134 screen termination 34.39 34.39 34.39 36.39 36.39 37.39 41.19 41.19 41.19 atynpde h0e7atshrink boot ØD8 ØD9 ØD10 L13 Max 1.354 1.354 1.354 1.433 1.433 1.472 1.622 1.622 1.622 L12 L13 79

8LT Series Receptacle type 3 L1 L2 B1 shell size 09 11 13 15 17 19 21 23 25 4 holes ØJ 24.25 26.60 29.00 31.35 33.75 36.90 40.10 43.25 46.50 B1 Max .955 1.047 1.142 1.234 1.329 1.453 1.579 1.703 1.831 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 38.10 ØD1 A E1 E1 .719 .812 .906 .969 1.062 1.156 1.250 1.375 1.500 14.53 17.78 21.59 24.77 27.94 30.66 33.83 37.00 40.18 D1 .572 .700 .850 .975 1.100 1.207 1.332 1.457 1.582 3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.73 3.73 Max. panel thickness 3.00/.118 J .128 .128 .128 .128 .128 .128 .128 .147 .147 L3 20.83 20.83 20.83 20.83 20.83 20.83 20.08 20.08 20.08 L5-L7-L10-L13 L1 Max .820 .820 .820 .820 .820 .820 .791 .791 .791 receptacle backshell assembly overall length 10.50 10.50 10.50 10.50 10.50 10.50 11.25 11.25 11.25 L2 Max .413 .413 .413 .413 .413 .413 .443 .443 .443 13.58/.535Max. 2.48 2.48 2.48 2.48 2.48 2.48 3.24 3.24 3.24 Detail A : L3 Max .098 .098 .098 .098 .098 .098 .128 .128 .128 sfoera tlirniagx ibaol o≠t 8u sCeodn tacts only D2 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 6.96 10.46 13.36 16.53 19.71 22.40 25.56 28.75 31.93 D3 Max .274 .412 .526 .651 .776 .882 1.006 1.132 1.257 Backshells 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 L4 Max .445 .445 .445 .445 .445 .445 .445 .445 .445 L4 15.85 15.85 15.85 15.85 15.85 15.85 16.60 16.60 16.60 L5 Max .624 .624 .624 .624 .624 .624 .654 .654 .654 Backnut type 01 D2 D3 D4 Max 15.6.6177 18.7.6344 21.8.7598 24.9.9894 218.1.2142 310.2.9148 314.3.1465 317.4.2698 410.5.4963 Ø Ø 1.40 1.40 2.40 5.60 5.60 8.80 11.90 15.10 15.10 min .055 .055 .094 .220 .220 .346 .469 .594 .594 D5 L5 3.20 4.80 6.40 9.50 12.70 15.90 19.10 22.20 25.40 Max .126 .189 .252 .374 .500 .626 .752 .874 1.000 21.03 22.63 25.81 28.98 30.56 37.31 37.31 42.06 44.45 F Max .828 .891 1.016 1.141 1.203 1.469 1.469 1.656 1.750 Ø for flange 22.22 22.22 22.22 28.57 28.57 28.57 28.57 31.75 31.75 L6 Max .875 .875 .875 1.125 1.125 1.125 1.125 1.250 1.250 L6 L7 Max 26.40 27.20 28.70 35.10 38.60 38.60 39.40 39.40 39.40 1.039 1.071 1.130 1.382 1.520 1.520 1.551 1.551 1.551 Straight 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 D6 Max cable clamp .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 type 02 ØD4 ØD5 F min 3.20 4.00 4.80 5.50 6.40 7.90 9.50 10.30 14.30 .126 .157 .189 .217 .252 .311 .374 .406 .563 D7 6.40 9.50 11.10 14.30 15.90 19.10 22.20 23.80 25.40 Max L7 .252 .374 .437 .563 .626 .752 .874 .937 1.000 35.32 35.32 37.30 41.67 46.04 46.45 48.43 51.98 54.78 L8 Max 1.391 1.391 1.469 1.641 1.813 1.829 1.907 2.046 2.157 25.40 26.19 27.79 30.96 32.54 34.14 34.93 36.53 43.66 LL88 L9 Max 1.000 1.031 1.094 1.219 1.281 1.344 1.375 1.438 1.719 39.90 39.90 41.90 48.10 50.60 51.00 53.80 57.30 60.10 L10 Max 1.571 1.571 1.650 1.894 1.992 2.008 2.118 2.256 2.366 Elbow ØD6 D8 Max 20.20 23.20 26.20 29.20 32.20 35.20 39.20 42.20 45.20 cable clamp .795 .913 1.031 1.150 1.268 1.386 1.543 1.661 1.780 type 03 L9 min 6.90 9.60 12.70 14.80 17.90 19.90 23.10 26.20 28.80 .272 .378 .500 .583 .705 .783 .909 1.031 1.134 D9 7.00 9.70 12.80 14.90 18.00 20.00 23.20 26.30 28.90 Max ØD7 .276 .382 .504 .587 .709 .787 .913 1.035 1.138 16.00 18.90 22.10 25.30 28.50 31.50 34.70 37.90 41.00 L10 D10 Max .630 .744 .870 .996 1.122 1.240 1.366 1.492 1.614 27.80 27.80 27.80 29.80 29.80 30.80 34.60 34.60 34.60 type 1 Ø for flange L11 1.094 1.094 1.094 1.173 1.173 1.213 1.362 1.362 1.362 - - - - - - - - - type 2 - - - - - - - - - 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40 L11 L12 Max .134 .134 .134 .134 .134 .134 .134 .134 .134 Backshell for 31.40 31.40 31.40 33.40 33.40 34.40 39.00 39.00 39.00 screen termination L13 Max 1.236 1.236 1.236 1.315 1.315 1.354 1.535 1.535 1.535 and heatshrink boot ØD8 ØD9 ØD10 type 07 L12 L13 80

8LT Series Receptacle type 7 L1 shell size 09 11 13 15 17 19 21 23 25 L2 B2 27.35 32.10 35.31 38.49 41.63 46.37 49.58 52.76 55.93 B B1 Max 1.077 1.264 1.390 1.515 1.639 1.826 1.952 2.077 2.202 ØD1 B1 B2 22.8.3850 215.0.5056 310.1.3903 313.3.4157 316.4.6453 319.5.8607 413.6.0903 416.8.1157 520.0.9056 14.53 17.78 21.59 24.77 27.94 30.66 33.83 37.00 40.18 ØD2 D1 .572 .700 .850 .975 1.100 1.207 1.332 1.457 1.582 L3 D2 Max 30.54 35.23 38.40 41.64 44.75 49.53 52.67 55.94 59.02 Max. panel thickness 3.18/.125 L5-L7-L10-L13 1.202 1.387 1.512 1.639 1.762 1.950 2.074 2.202 2.324 receptacle backshell assembly overall length L1 Max 23.36 23.36 23.36 23.36 23.36 23.36 23.36 23.36 23.36 .920 .920 .920 .920 .920 .920 .920 .920 .920 8.32 8.32 8.32 8.32 8.32 8.32 8.32 8.32 8.32 13.58/.527Max L2 Max .328 .328 .328 .328 .328 .328 .328 .328 .328 Detail A : 3.00 3.00 3.00 3.00 3.00 3.79 3.79 3.79 3.79 L3 Max sealing boot used .118 .118 .118 .118 .118 .149 .149 .149 .149 for triaxial ≠8 Contacts only 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 D3 Max .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 6.96 10.46 13.36 16.53 19.71 22.40 25.56 28.75 31.93 D4 Max Backshells .274 .412 .526 .651 .776 .882 1.006 1.132 1.257 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 L4 Max .445 .445 .445 .445 .445 .445 .445 .445 .445 L4 13.66 13.66 13.66 13.66 13.66 13.66 13.66 13.66 13.66 L5 Max .538 .538 .538 .538 .538 .538 .538 .538 .538 Backnut type 01 D3 D4 D5 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 Ø Ø .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 1.40 1.40 2.40 5.60 5.60 8.80 11.90 15.10 15.10 min .055 .055 .094 .220 .220 .346 .469 .594 .594 L5 D6 3.20 4.80 6.40 9.50 12.70 15.90 19.10 22.20 25.40 Max .126 .189 .252 .374 .500 .626 .752 .874 1.000 21.03 22.63 25.81 28.98 30.56 37.31 37.31 42.06 44.45 F Max .828 .891 1.016 1.141 1.203 1.469 1.469 1.656 1.750 Ø for flange 22.22 22.22 22.22 28.57 28.57 28.57 28.57 31.75 31.75 L6 Max .875 .875 .875 1.125 1.125 1.125 1.125 1.250 1.250 LL66 24.22 25.02 26.52 32.92 36.42 36.42 36.42 36.42 36.42 L7 Max .954 .985 1.044 1.296 1.434 1.434 1.434 1.434 1.434 Straight 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 D7 Max ctyapbele 0 c2lamp ØD5 ØD6 F min 3.6.2107 4.7.0304 4.8.8508 5.9.5804 16.1.4102 17.2.9108 19.3.5405 110.4.3608 114.5.3903 .126 .157 .189 .217 .252 .311 .374 .406 .563 D8 6.40 9.50 11.10 14.30 15.90 19.10 22.20 23.80 25.40 L7 Max .252 .374 .437 .563 .626 .752 .874 .937 1.000 35.32 35.32 37.30 41.67 46.04 46.45 48.43 51.98 54.78 L8 Max 1.391 1.391 1.469 1.641 1.813 1.829 1.907 2.046 2.157 L8 25.40 26.19 27.79 30.96 32.54 34.14 34.93 36.53 43.66 L9 Max 1.000 1.031 1.094 1.219 1.281 1.344 1.375 1.438 1.719 37.68 37.68 39.66 45.83 48.40 48.81 50.79 54.34 57.14 L10 Max D7 1.483 1.483 1.561 1.804 1.906 1.922 2.000 2.139 2.250 Elbow Ø 20.20 23.20 26.20 29.20 32.20 35.20 39.20 42.20 45.20 D9 Max cable clamp .795 .913 1.031 1.150 1.268 1.386 1.543 1.661 1.780 type 03 L9 6.90 9.60 12.70 14.80 17.90 19.90 23.10 26.20 28.80 min .272 .378 .500 .583 .705 .783 .909 1.031 1.134 D10 7.00 9.70 12.80 14.90 18.00 20.00 23.20 26.30 28.90 ØD8 Ø for flange Max .276 .382 .504 .587 .709 .787 .913 1.035 1.138 L10 D11 Max 16.00 18.90 22.10 25.30 28.50 31.50 34.70 37.90 41.00 .630 .744 .870 .996 1.122 1.240 1.366 1.492 1.614 - - - - - - - - - type 1 - - - - - - - - - L11 26.70 26.70 26.70 28.70 28.70 29.70 33.50 33.50 33.50 type 2 1.051 1.051 1.051 1.130 1.130 1.169 1.319 1.319 1.319 L11 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40 L12 Max .134 .134 .134 .134 .134 .134 .134 .134 .134 Backshell for 29.22 29.22 29.22 31.22 31.22 32.22 36.02 36.02 36.02 sacnrde ehne atetsrhmriinnka tbioonot ØD9 ØD10 ØD11 L13 Max 1.150 1.150 1.150 1.229 1.229 1.269 1.418 1.418 1.418 type 07 L12 L13 81

8LT Series Cable connecting receptacle type 1 L1 L2 B1 shell size 09 11 13 15 17 19 21 23 25 18.92 22.22 25.62 27.82 31.35 34.62 38.02 42.02 46.50 B1 Max .745 .875 1.009 1.095 1.234 1.363 1.497 1.654 1.831 A 22.35 25.65 29.05 31.25 34.65 38.05 41.45 45.45 49.95 D1 E1 .880 1.010 1.144 1.230 1.364 1.498 1.632 1.789 1.967 Ø 14.53 17.78 21.59 24.77 27.94 30.66 33.83 37.00 40.18 D1 .572 .700 .850 .975 1.100 1.207 1.332 1.457 1.582 ØE1 16.05 16.05 16.05 16.05 16.05 16.05 15.29 15.29 15.29 L1 Max L3 .632 .632 .632 .632 .632 .632 .602 .602 .602 13.45 13.45 13.45 13.45 13.45 13.45 13.45 13.45 13.45 L2 Max .530 .530 .530 .530 .530 .530 .530 .530 .530 L5-L7-L10-L13 receptacle backshell assembly overall length L3 Max 2.48 2.48 2.48 2.48 2.48 2.48 3.24 3.24 3.24 .098 .098 .098 .098 .098 .098 .128 .128 .128 13.39/.527 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 Detail A : D2 Max .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 sealing boot used 6.96 10.46 13.36 16.53 19.71 22.40 25.56 28.75 31.93 for triaxial ≠8 Contacts only D3 Max .274 .412 .526 .651 .776 .882 1.006 1.132 1.257 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 L4 Max Backshells .445 .445 .445 .445 .445 .445 .445 .445 .445 37.36 37.36 37.36 37.36 37.36 37.36 37.36 37.36 37.36 L5 Max 1.471 1.471 1.471 1.471 1.471 1.471 1.471 1.471 1.471 L4 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 D4 Max .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 Backnut type 01 D2 D3 min 1.40 1.40 2.40 5.60 5.60 8.80 11.90 15.10 15.10 Ø Ø .055 .055 .094 .220 .220 .346 .469 .594 .594 D5 3.20 4.80 6.40 9.50 12.70 15.90 19.10 22.20 25.40 Max .126 .189 .252 .374 .500 .626 .752 .874 1.000 L5 21.03 22.63 25.81 28.98 30.56 37.31 37.31 42.06 44.45 F Max .828 .891 1.016 1.141 1.203 1.469 1.469 1.656 1.750 22.22 22.22 22.22 28.57 28.57 28.57 28.57 31.75 31.75 L6 Max .875 .875 .875 1.125 1.125 1.125 1.125 1.250 1.250 Ø for flange 47.98 48.72 50.22 56.62 60.12 60.12 60.12 60.12 60.12 L7 Max 1.889 1.918 1.977 2.229 2.367 2.367 2.367 2.367 2.367 L6 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 D6 Max .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 Straight 3.20 4.00 4.80 5.50 6.40 7.90 9.50 10.30 14.30 min ctyapbele 0 c2lamp ØD4 ØD5 F D7 Max 6.1.4206 9.1.5507 11.1.1809 14.2.3107 15.2.9502 19.3.1101 22.3.2704 23.4.8006 25.5.4603 .252 .374 .437 .563 .626 .752 .874 .937 1.000 35.32 35.32 37.30 41.67 46.04 46.45 48.43 51.98 54.78 L7 L8 Max 1.391 1.391 1.469 1.641 1.813 1.829 1.907 2.046 2.157 25.40 26.19 27.79 30.96 32.54 34.14 34.93 36.53 43.66 L9 Max 1.000 1.031 1.094 1.219 1.281 1.344 1.375 1.438 1.719 L8 61.38 61.38 63.36 69.53 72.10 72.51 74.49 78.04 80.84 L10 Max 2.417 2.417 2.494 2.737 2.839 2.855 2.933 3.072 3.183 20.20 23.20 26.20 29.20 32.20 35.20 39.20 42.20 45.20 Elbow D6 D8 Max .795 .913 1.031 1.150 1.268 1.386 1.543 1.661 1.780 cable clamp Ø 6.90 9.60 12.70 14.80 17.90 19.90 23.10 26.20 28.80 min type 03 .272 .378 .500 .583 .705 .783 .909 1.031 1.134 L9 D9 7.00 9.70 12.80 14.90 18.00 20.00 23.20 26.30 28.90 Max .276 .382 .504 .587 .709 .787 .913 1.035 1.138 16.00 18.90 22.10 25.30 28.50 31.50 34.70 37.90 41.00 ØD7 Ø for flange D10 Max .630 .744 .870 .996 1.122 1.240 1.366 1.492 1.614 L10 27.80 27.80 27.80 29.80 29.80 30.80 34.60 34.60 34.60 type 1 1.094 1.094 1.094 1.173 1.173 1.213 1.362 1.362 1.362 L11 - - - - - - - - - type 2 - - - - - - - - - 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40 L12 Max .134 .134 .134 .134 .134 .134 .134 .134 .134 L11 52.92 52.92 52.92 54.92 54.92 55.92 59.72 59.72 59.72 Backshell for L13 Max 2.083 2.083 2.083 2.162 2.162 2.202 2.351 2.351 2.351 screen termination atynpde h0e7atshrink boot ØD8 ØD9 ØD10 L12 L13 82

8LT Series Receptacle with straight spill contacts receptacle type 7 receptacle type 0 receptacle type 3 L2 L4 L3 L3 L5 L3 ØA ØA A Ø shell size 09 11 13 15 17 19 21 23 25 Max 10.06 10.06 10.06 10.06 10.06 10.06 10.06 10.06 10.06 CM .396 .396 .396 .396 .396 .396 .396 .396 .396 min 9.07 9.07 9.07 9.07 9.07 9.07 9.07 9.07 9.07 # 22D .357 .357 .357 .357 .357 .357 .357 .357 .357 8LT Max 10.06 10.06 10.06 10.06 10.06 10.06 10.06 10.06 10.06 CF .396 .396 .396 .396 .396 .396 .396 .396 .396 min 8.74 8.74 8.74 8.74 8.74 8.74 8.74 8.74 8.74 .344 .344 .344 .344 .344 .344 .344 .344 .344 L2 Max 10.23 10.23 10.23 10.23 10.23 10.23 10.23 10.23 10.23 CM .403 .403 .403 .403 .403 .403 .403 .403 .403 min 9.24 9.24 9.24 9.24 9.24 9.24 9.24 9.24 9.24 # 22D .364 .364 .364 .364 .364 .364 .364 .364 .364 HE308 Max 10.23 10.23 10.23 10.23 10.23 10.23 10.23 10.23 10.23 CF .403 .403 .403 .403 .403 .403 .403 .403 .403 min 8.91 8.91 8.91 8.91 8.91 8.91 8.91 8.91 8.91 .351 .351 .351 .351 .351 .351 .351 .351 .351 Max 10.23 10.23 10.23 10.23 10.23 10.23 10.23 10.23 10.23 #20 - #16 CM and CF .403 .403 .403 .403 .403 .403 .403 .403 .403 8LT HE308 min 9.24 9.24 9.24 9.24 9.24 9.24 9.24 9.24 9.24 .364 .364 .364 .364 .364 .364 .364 .364 .364 8LT 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 #22D .028 .028 .028 .028 .028 .028 .028 .028 .028 HE308 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 ØA .020 .020 .020 .020 .020 .020 .020 .020 .020 #20 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 .028 .028 .028 .028 .028 .028 .028 .028 .028 #16 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15 .045 .045 .045 .045 .045 .045 .045 .045 .045 8LT 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 PC #22D .157 .157 .157 .157 .157 .157 .157 .157 .157 HE308 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 .197 .197 .197 .197 .197 .197 .197 .197 .197 L3 PC#20 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 .197 .197 .197 .197 .197 .197 .197 .197 .197 PC#16 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 .197 .197 .197 .197 .197 .197 .197 .197 .197 PL#22D 8LT 8.50 8.50 8.50 8.50 8.50 8.50 8.50 8.50 8.50 .335 .335 .335 .335 .335 .335 .335 .335 .335 Max 15.08 15.08 15.08 15.08 15.08 15.08 15.08 15.08 15.08 CM .594 .594 .594 .594 .594 .594 .594 .594 .594 min 13.91 13.91 13.91 13.91 13.91 13.91 13.91 13.91 13.91 #22D .548 .548 .548 .548 .548 .548 .548 .548 .548 8LT Max 15.08 15.08 15.08 15.08 15.08 15.08 15.08 15.08 15.08 L4 CF .594 .594 .594 .594 .594 .594 .594 .594 .594 min 13.58 13.58 13.58 13.58 13.58 13.58 13.58 13.58 13.58 .535 .535 .535 .535 .535 .535 .535 .535 .535 Max 15.25 15.25 15.25 15.25 15.25 15.25 15.25 15.25 15.25 #20 - #16 CM and CF .600 .600 .600 .600 .600 .600 .600 .600 .600 8LT min 14.08 14.08 14.08 14.08 14.08 14.08 14.08 14.08 14.08 .554 .554 .554 .554 .554 .554 .554 .554 .554 Max 12.47 12.47 12.47 12.47 12.47 12.47 13.22 13.22 13.22 CM .491 .491 .491 .491 .491 .491 .520 .520 .520 min 11.60 11.60 11.60 11.60 11.60 11.60 12.35 12.35 12.35 #22D .457 .457 .457 .457 .457 .457 .486 .486 .486 8LT Max 12.47 12.47 12.47 12.47 12.47 12.47 13.22 13.22 13.22 CF .491 .491 .491 .491 .491 .491 .520 .520 .520 L5 min 11.27 11.27 11.27 11.27 11.27 11.27 12.02 12.02 12.02 .444 .444 .444 .444 .444 .444 .473 .473 .473 Max 12.64 12.64 12.64 12.64 12.64 12.64 13.39 13.39 13.39 #20 - #16 CM and CF .498 .498 .498 .498 .498 .498 .527 .527 .527 8LT min 11.77 11.77 11.77 11.77 11.77 11.77 12.52 12.52 12.52 .463 .463 .463 .463 .463 .463 .493 .493 .493 CM : male contact CF : female contact PL : long spill PC : short spill 83

8LT Series Receptacle with wire wrap contacts Receptacle type 7 Receptacle type 2 A L1 L2 B 4 holes ØJ contact contact A B ØD1 ØD2 E1 0.86 size type Max Max 0.034 10.06 16.00 22D W 3 wraps 0.396 0.63 L3 B1 10.06 16.00 20 T2 wraps 0.396 0.63 shell size 09 11 13 15 17 19 21 23 25 20.83 20.83 20.83 20.83 20.83 20.83 20.08 20.08 20.08 L1 Max .820 .820 .820 .820 .820 .820 .791 .791 .791 5.55 5.55 5.55 5.55 5.55 5.55 6.30 6.30 6.30 L2 Max .219 .219 .219 .219 .219 .219 .248 .248 .248 2.48 2.48 2.48 2.48 2.48 2.48 3.24 3.24 3.24 L3 Max .098 .098 .098 .098 .098 .098 .128 .128 .128 14.53 17.78 21.59 24.77 27.94 30.66 33.83 37.00 40.18 D1 .572 .700 .850 .975 1.100 1.207 1.332 1.457 1.582 9.95 12.90 16.10 19.05 22.20 25.20 28.35 31.50 34.70 D2 Max .392 .508 .634 .750 .874 .992 1.116 1.240 1.366 24.25 26.60 29.00 31.35 33.75 36.90 40.10 43.25 46.50 B1 Max .955 1.047 1.142 1.234 1.329 1.453 1.579 1.703 1.831 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 38.10 E1 .719 .812 .906 .969 1.062 1.156 1.250 1.375 1.500 Panel cut-out square flange receptacle jam nut receptacle Ød1 e Ød2 p e 4ØJ shell size 09 11 13 15 17 19 21 23 25 type 0 15.70 18.70 21.80 25.00 28.30 31.00 34.20 37.30 40.50 .618 .736 .858 .984 1.114 1.220 1.346 1.469 1.594 d1 min type 3 16.66 20.22 23.42 26.59 30.96 32.94 36.12 39.29 42.47 .656 .796 .922 1.047 1.219 1.297 1.422 1.547 1.672 17.70 20.88 25.58 28.80 31.98 35.15 38.28 41.50 44.68 d2 .697 .822 1.007 1.134 1.259 1.384 1.507 1.634 1.759 3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.91 3.91 J .128 .128 .128 .128 .128 .128 .128 .154 .154 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.92 38.10 e .719 .812 .906 .969 1.062 1.156 1.250 1.375 1.500 16.99 19.53 24.26 27.53 30.68 33.86 37.06 40.01 43.41 P .669 .769 .955 1.084 1.208 1.333 1.459 1.575 1.709 84

8LT Series Accessories Protective caps for receptacles Protective caps for plugs B D Ød1 Ød1 ØA ØC L1 L1 type 01 type 01 B D Ød2 ØA ØAØC L2 L5 type 02 type 03 B D Ød1 Ød1 A C Ø Ø L3 L6 type 04 type 05 B D Ød2 ØA ØC L4 L7 type 06 type 07 shell A B C D size Max Max Max Max d1 min d2 min L1 L2 L3 L4 L5 L6 L7 21.20 28.00 20.50 29.50 3.20 17.80 76.00 76.00 105.00 105.00 200.00 160.00 160.00 09 .835 1.102 .807 1.161 .126 .701 2.992 2.992 4.134 4.134 7.874 6.299 6.299 24.40 28.00 23.70 29.50 3.20 21.30 76.00 76.00 105.00 105.00 200.00 160.00 160.00 11 .961 1.102 .933 1.161 .126 .839 2.992 2.992 4.134 4.134 7.874 6.299 6.299 28.40 28.00 26.90 29.50 3.20 25.70 89.00 89.00 105.00 105.00 200.00 160.00 160.00 13 1.118 1.102 1.059 1.161 .126 1.012 3.504 3.504 4.134 4.134 7.874 6.299 6.299 31.60 28.00 30.10 29.50 3.20 29.00 89.00 89.00 105.00 105.00 200.00 160.00 160.00 15 1.244 1.102 1.185 1.161 .126 1.142 3.504 3.504 4.134 4.134 7.874 6.299 6.299 35.50 28.00 33.20 29.50 3.20 32.00 89.00 89.00 105.00 105.00 200.00 160.00 160.00 17 1.398 1.102 1.307 1.161 .126 1.260 3.504 3.504 4.134 4.134 7.874 6.299 6.299 37.90 28.00 36.40 29.50 3.20 35.30 89.00 89.00 105.00 105.00 200.00 160.00 160.00 19 1.492 1.102 1.433 1.161 .126 1.390 3.504 3.504 4.134 4.134 7.874 6.299 6.299 41.10 28.00 39.60 29.50 3.20 38.10 102.00 102.00 105.00 105.00 200.00 160.00 160.00 21 1.618 1.102 1.559 1.161 .126 1.500 4.016 4.016 4.134 4.134 7.874 6.299 6.299 44.30 28.00 42.80 29.50 3.20 41.70 102.00 102.00 105.00 105.00 200.00 160.00 160.00 23 1.744 1.102 1.685 1.161 .126 1.642 4.016 4.016 4.134 4.134 7.874 6.299 6.299 47.40 28.00 45.90 29.50 3.20 44.70 102.00 102.00 105.00 105.00 200.00 160.00 160.00 25 1.866 1.102 1.807 1.161 .126 1.760 4.016 4.016 4.134 4.134 7.874 6.299 6.299 85

8LT Series Protective caps basic series 8LT E 01 G 13 cap type E - cap for receptacle F - cap for plug fixing type cap for receptacle cap for plug 01 - plastic sleeved metal cord with eyelet 01 - plastic sleeved metal cord with eyelet 02 - plastic sleeved metal cord with ring 03 - nylon cord without fastener 04 - nylon cord with eyelet 05 - nylon cord with eyelet 06 - nylon cord with ring 07 - nylon cord with strap plating B - olive green cadmium (MIL-C 38999) F - nickel shell size 09-11-13-15-17-19-21-23-25 Dummy receptacles shell L1 L3 D1 B1 part numbers E1 J size Max Max Max Max 09 8LTO-09GUR 16.05 2.48 14.53 24.25 18.26 3.25 4 holes ØJ .632 .098 .572 .955 .719 .128 16.05 2.48 17.78 26.60 20.62 3.25 11 8LTO-11GUR .632 .098 .700 1.047 .812 .128 16.05 2.48 21.59 29.00 23.01 3.25 13 8LTO-13GUR 16.6.0352 2.0.4988 24.8.7570 311.1.3452 24.9.6016 3.1.2258 ØD1 B1 E1 15 8LTO-15GUR .632 .098 .975 1.234 .969 .128 16.05 2.48 27.94 33.75 26.97 3.25 17 8LTO-17GUR .632 .098 1.100 1.329 1.062 .128 19 8LTO-19GUR 16.05 2.48 30.66 39.90 29.36 3.25 L1 E1 .632 .098 1.207 1.453 1.156 .128 LL33 B1 15.29 3.24 33.83 40.10 31.75 3.25 21 8LTO-21GUR .602 .128 1.332 1.579 1.250 .128 15.29 3.24 37.00 43.25 34.93 3.73 23 8LTO-23GUR .602 .128 1.457 1.703 1.375 .147 15.29 3.24 40.18 46.50 38.10 3.73 25 8LTO-25GUR .602 .128 1.582 1.831 1.500 .147 Plastic protective caps part numbers shell size caps for receptacles caps for plugs 09 8500-5594 8500-5595 11 8500-5595 8500-5588 13 8500-5598 70205 15 8500-5599 70206 17 8500-5600 70207 19 8500-5601 8500-5589 21 8500-5602 8500-5590 23 8500-5592 8500-5591 25 8500-5593 70602 Gaskets part numbers shell size gasket for receptacles type 0 O ring for receptacle type7 (ordered separately) 09 8599-5541 MS9068-019 11 8599-5542 MS9068-022 13 8599-5543 MS9068-024 15 8599-5544 MS9068-026 17 8599-5545 MS9068-028 19 8599-5546 MS9068-128 21 8599-5547 MS9068-130 23 8599-5548 MS9068-132 25 8599-5549 MS9068-134 86

8LT Series Rack and panel connectors Mated connector shell size 23 Layout 01 36 1.417 30 1.181 100 3.937 1 Ø12 SN2550 basic series SN 2550 -26 T 23 -01 P N 7 M • HE 308 basic series HE 308 shell type 26 - floating plug for rack, for crimp female contacts, with possibility to mount rear accessory 27 - receptacle for rack, for male contacts with possibility to mount rear accessory class T - sealed shell size - please consult us contact layout - please consult us contact type P - male contact S - female contact polarization N - normal plating 7 - olive green cadmium contractual specification M - DAT quality assurance specification - - connector supplied with contact (without specification) L - connector supplied without contact Through-bulkhead receptacle - pin/socket 9.5/.374 Max 9.5/.374 Max 4 holes ØF D A B C D E F shell size Max Max Max Max Max 25.40 2.50 14.56 18.26 24.34 3.50 09 1.000 .098 .573 .719 .958 .138 C Ø 25.40 2.50 17.81 20.62 26.70 3.50 11 1.000 .098 .701 .812 1.051 .138 25.40 2.50 21.62 23.01 29.09 3.50 13 A B 1.000 .098 .851 .906 1.145 .138 E 15 25.40 2.50 24.80 24.61 31.47 3.50 52.95/2.085 Max 1.000 .098 .976 .969 1.239 .138 25.40 2.50 27.97 26.97 33.83 3.50 17 1.000 .098 1.101 1.062 1.332 .138 basic series SN1568-08 T ••-•• PNSN 7 19 25.40 2.50 30.69 29.36 37.04 3.50 1.000 .098 1.208 1.156 1.458 .138 25.10 3.25 33.86 31.75 40.18 3.98 through bulkhead receptacle 21 .988 .128 1.333 1.250 1.582 .157 class T - sealed 25.10 3.25 37.04 34.93 43.39 3.98 23 .988 .128 1.458 1.375 1.708 .157 shell size 09-11-13-15-17-19-21-23-25 25.10 3.25 40.21 38.10 46.53 3.98 25 .988 .128 1.583 1.500 1.832 .157 contact layout - please consult us male contact/polarization female contact/polarization plating 7 - olive green cadmium 87

8T Series Applications Description Compact profile and high density • High density connectors from 1 to connectors for all military and 128contacts aeronautical purposes • Sizes 22D, 20, 16, 12 Standards • A compact profile • Bayonet locking system MIL-C38999 Series II - QPL approved • An excellent shock vibration and fluid NFC 93422 HE 309 resistance VG 96912 series II PAN 6433-1 BS 9522 N 003 Characteristics Electrical Climatic • Test voltage (Vrms) • Temperature range : Mechanical - cadmium plating (G) -65°C +175°C • Shell : aluminum alloy Service sea level at 21000 m (B) -65°C +175°C M 1300 800 • Plating : - nickel plating (F) -65°C +200°C I 1800 1000 - olive green cadmium (G and B) II 2300 1000 - hard anodized (C) -65°C +200°C - nickel (F) - hard anodized (C) • Sealing : mated connectors • Insulator : thermoplastic • Contact resistance : differential pressure 1 bar ; leakage ≤8 cm3/hr • Grommet and seal : silicone elastomer size 22 D : 14.6 mΩ size 16 : 3.8 mΩ • Salt spray to : • Contact : copper alloy size 20 : 7.3 mΩ MIL-STD 1344 method 1001 - 500 hours (plating B) • Plating : gold over nickel • Insulation resistance : ≥5000 MΩ(at 500 Vdc) - 48 hours (plating F-C) • Endurance : NFC 93422 500 mating/unmating operations • Contact rating : - 48 hours (plating G-F-C) • Shock : 300 g during 3ms size 22 D : 5 A size 16 : 13 A • Damp heat : size 20 : 7.5 A size 12 : 23 A • Vibration : - MIL-C 38999 : 10 cycles (24 hours) random 100 to 1000 Hz - 1 g2/Hz • Shell continuity : - NFC 93422: 56 days - olive green plating : 2.5 mΩ • Contact retention (mini force in N) : size 22D: 44 N size 20 : 67 N - nickel plating : 1 mΩ Resistance to fluids size 16: 110 N size 12 : 110 N To MIL-L 38999 : MIL-L 7808, MIL-L 23699, MIL-H 5606, MIL-A 8243, MIL-L 25769, MIL-G 3056, MIL-T 5624 (JP5) ; hydraulic fluids ; solvents To NFC 93422 : F 46, F54, 0/180, H 515, H542, XH 45 Ordering information FCI Souriau - Part numbers basic series 8 T 3 - 14 G 35 P N shell type 2 - square flange receptacle not accepting backshells 3 - square flange receptacle (rear mounting) 7 - jam nut receptacle 1 - cable connecting receptacle 6 - plug designator - connectors with standard crimp contacts L - receptacle with long spill (male and female # 22D) C - receptacle with short spill (male # 22D - # 20 - # 16) shell size 08-10-12-14-16-18-20-22-24 plating G - olive green cadmium (HE 309) F - nickel B - olive green cadmium (MIL-C 38999) C - hard anodized contact layout - see table p 120 contact type P - male A - male connector without contact or with special contacts S - female B - female connector without contact or with special contacts polarization N-A-B-C-D- see table p 100 Note: connectors supplied with standard contacts 97

8T Series MIL-C 38999 Series II basic series MS 27497 T 14 B 35 P • shell type 27508 - square flange receptacle without thread for back fitting 27497 - square flange receptacle (rear mounting) 27474 - jam nut receptacle 27473 - plug class T - with thread for backshell, supplied without backshell E - without thread for backshell only for MS 27508 shell size 08-10-12-14-16-18-20-22-24 plating B - olive green cadmium F- nickel C- hard anodized contact layout - see table p 120 contact type P - male A- male connector supplied without contact or with special contacts S - female B- female connector supplied without contact or with special contacts polarization N - Normal (not included in part number) A-B-C-D -see table p 100 backshells basic series 8LST 104 G 01 shell size 08 10 12 14 16 18 20 22 24 index number 101 102 103 104 105 106 107 108 109 plating B - olive green cadmium (MIL. C 38999) F - nickel backshell type 01 - backnut 03- elbow cable clamp 02 - straight cable clamp Cross reference list - part numbers cross reference list FCI Souriau and MIL-C 38999 NFC93422 - PAN 6433-1 FCISouriau MIL-C 38999 Series II NFC 93422 / HE 309 PAN 6433-1 8T2 - •• G •• P (cid:2)(cid:2) HE 309-05T •• - •• P (cid:2)(cid:2) 7 PAN 6433-1E •• - •• P (cid:2)(cid:2) 8T2 - •• G •• A (cid:2)(cid:2) HE 309-05T •• - •• P (cid:2)(cid:2) 7L 8T2 - •• G •• S (cid:2)(cid:2) HE 309-05T •• - •• S (cid:2)(cid:2) 7 PAN 6433-1E •• - •• S (cid:2)(cid:2) g ptacleck fittin 888TTT222 --- •••••• BGB •••••• PAB (cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2) MMSS2277550088EE •••• BB •••• PA (cid:2)(cid:2)(cid:2)(cid:2) HE 309-05T •• - •• S (cid:2)(cid:2) 7L ceba 8T2 - •• B •• S (cid:2)(cid:2) MS27508E •• B •• S (cid:2)(cid:2) Square flange rewithout thread for 8888888TTTTTTT2222222 ------- •••••••••••••• BCFFFFC •••••••••••••• PASBBAP (cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2) MMMMMMMSSSSSSS22222227777777555555500000008888888EEEEEEE •••••••••••••• CBCFFFF •••••••••••••• PASBBAP (cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2) HHHHHHEEEEEE 333333000000999999------000000555555TTTTTT •••••••••••• ------ •••••••••••• PPPPSS (cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2) 866668LLL 8T2 - •• C •• S (cid:2)(cid:2) MS27508E •• C •• S (cid:2)(cid:2) HE 309-05T •• - •• S (cid:2)(cid:2) 8 8T2 - •• C •• B (cid:2)(cid:2) MS27508E •• C •• B (cid:2)(cid:2) HE 309-05T •• - •• S (cid:2)(cid:2) 8L 8T3 - •• G •• P (cid:2)(cid:2) HE 309-03T •• - •• P (cid:2)(cid:2) 7 PAN 6433-1B •• - •• P (cid:2)(cid:2) 8T3 - •• G •• A (cid:2)(cid:2) HE 309-03T •• - •• P (cid:2)(cid:2) 7L 8T3 - •• G •• S (cid:2)(cid:2) HE 309-03T •• - •• S (cid:2)(cid:2) 7 PAN 6433-1B •• - •• S (cid:2)(cid:2) Square flange receptaclewith thread for back fitting 8888888888TTTTTTTTTT3333333333 ---------- •••••••••••••••••••• BBFFFFCGBB •••••••••••••••••••• PASBBASPPB (cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2) MMMMMMMMMSSSSSSSSS222222222777777777444444444999999999777777777TTTTTTTTT •••••••••••••••••• BBCBFFFFB •••••••••••••••••• PASBSBPAP (cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2) HHHHHHEEEEEE 333333000000999999------000000333333TTTTTT •••••••••••• ------ •••••••••••• PPPSSS (cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2)(cid:2) 866667LLL 8T3 - •• C •• A (cid:2)(cid:2) MS27497T •• C •• A (cid:2)(cid:2) HE 309-03T •• - •• P (cid:2)(cid:2) 8L 8T3 - •• C •• S (cid:2)(cid:2) MS27497T •• C •• S (cid:2)(cid:2) HE 309-03T •• - •• S (cid:2)(cid:2) 8 8T3 - •• C •• B (cid:2)(cid:2) MS27497T •• C •• B (cid:2)(cid:2) HE 309-03T •• - •• S (cid:2)(cid:2) 8L 98

8T Series Cross reference list - FCI Souriau part numbers and MIL-C 38999, NFC93422 - PAN 6433-1 standard FCISouriau MIL-C 38999 Series II NFC 93422 / HE 309 PAN 6433-1 8T7 - •• G •• P (cid:2)(cid:2) HE 309-07T •• - •• P (cid:2)(cid:2) 7 PAN 6433-1A •• - •• P (cid:2)(cid:2) 8T7 - •• G •• A (cid:2)(cid:2) HE 309-07T •• - •• P (cid:2)(cid:2) 7L 8T7 - •• G •• S (cid:2)(cid:2) HE 309-07T •• - •• S (cid:2)(cid:2) 7 PAN 6433-1A •• - •• S (cid:2)(cid:2) 8T7 - •• G •• B (cid:2)(cid:2) HE 309-07T •• - •• S (cid:2)(cid:2) 7L e 8T7 - •• B •• P (cid:2)(cid:2) MS27474T •• B •• P (cid:2)(cid:2) cl 8T7 - •• B •• A (cid:2)(cid:2) MS27474T •• B •• A (cid:2)(cid:2) a pt 8T7 - •• B •• S (cid:2)(cid:2) MS27474T •• B •• S (cid:2)(cid:2) ce 8T7 - •• B •• B (cid:2)(cid:2) MS27474T •• B •• B (cid:2)(cid:2) e nut r 88TT77 -- •••• FF •••• PA (cid:2)(cid:2)(cid:2)(cid:2) MMSS2277447744TT •••• FF •••• PA (cid:2)(cid:2)(cid:2)(cid:2) HHEE 330099--0077TT •••• -- •••• PP (cid:2)(cid:2)(cid:2)(cid:2) 66L m 8T7 - •• F •• S (cid:2)(cid:2) MS27474T •• F •• S (cid:2)(cid:2) HE 309-07T •• - •• S (cid:2)(cid:2) 6 Ja 8T7 - •• F •• B (cid:2)(cid:2) MS27474T •• F •• B (cid:2)(cid:2) HE 309-07T •• - •• S (cid:2)(cid:2) 6L 8T7 - •• C •• P (cid:2)(cid:2) MS27474T •• C •• P (cid:2)(cid:2) HE 309-07T •• - •• P (cid:2)(cid:2) 8 8T7 - •• C •• A (cid:2)(cid:2) MS27474T •• C •• A (cid:2)(cid:2) HE 309-07T •• - •• P (cid:2)(cid:2) 8L 8T7 - •• C •• S (cid:2)(cid:2) MS27474T •• C •• S (cid:2)(cid:2) HE 309-07T •• - •• S (cid:2)(cid:2) 8 8T7 - •• C •• B (cid:2)(cid:2) MS27474T •• C •• B (cid:2)(cid:2) HE 309-07T •• - •• S (cid:2)(cid:2) 8L 8T1 - •• G •• P (cid:2)(cid:2) 8T1 - •• G •• A (cid:2)(cid:2) 8T1 - •• G •• S (cid:2)(cid:2) cle 8T1 - •• G •• B (cid:2)(cid:2) pta 8T1 - •• B •• P (cid:2)(cid:2) ce 8T1 - •• B •• A (cid:2)(cid:2) ng re 88TT11 -- •••• BB •••• SB (cid:2)(cid:2)(cid:2)(cid:2) cti 8T1 - •• F •• P (cid:2)(cid:2) ne 8T1 - •• F •• A (cid:2)(cid:2) n co 8T1 - •• F •• S (cid:2)(cid:2) e 8T1 - •• F •• B (cid:2)(cid:2) abl 8T1 - •• C •• P (cid:2)(cid:2) C 8T1 - •• C •• A (cid:2)(cid:2) 8T1 - •• C •• S (cid:2)(cid:2) 8T1 - •• C •• B (cid:2)(cid:2) 8T6 - •• G •• P (cid:2)(cid:2) HE 309-06T •• - •• P (cid:2)(cid:2) 7 PAN 6433-1F •• - •• P (cid:2)(cid:2) 8T6 - •• G •• A (cid:2)(cid:2) HE 309-06T •• - •• P (cid:2)(cid:2) 7L 8T6 - •• G •• S (cid:2)(cid:2) HE 309-06T •• - •• S (cid:2)(cid:2) 7 PAN 6433-1F •• - •• S (cid:2)(cid:2) g 8T6 - •• G •• B (cid:2)(cid:2) HE 309-06T •• - •• S (cid:2)(cid:2) 7L din 8T6 - •• B •• P (cid:2)(cid:2) MS27473T •• B •• P (cid:2)(cid:2) hiel 8T6 - •• B •• A (cid:2)(cid:2) MS27473T •• B •• A (cid:2)(cid:2) s 8T6 - •• B •• S (cid:2)(cid:2) MS27473T •• B •• S (cid:2)(cid:2) RFI 8T6 - •• B •• B (cid:2)(cid:2) MS27473T •• B •• B (cid:2)(cid:2) ut 8T6 - •• F •• P (cid:2)(cid:2) MS27473T •• F •• P (cid:2)(cid:2) HE 309-06T •• - •• P (cid:2)(cid:2) 6 ho 8T6 - •• F •• A (cid:2)(cid:2) MS27473T •• F •• A (cid:2)(cid:2) HE 309-06T •• - •• P (cid:2)(cid:2) 6L wit 8T6 - •• F •• S (cid:2)(cid:2) MS27473T •• F •• S (cid:2)(cid:2) HE 309-06T •• - •• S (cid:2)(cid:2) 6 g 8T6 - •• F •• B (cid:2)(cid:2) MS27473T •• F •• B (cid:2)(cid:2) HE 309-06T •• - •• S (cid:2)(cid:2) 6L Plu 8T6 - •• C •• P (cid:2)(cid:2) MS27473T •• C •• P (cid:2)(cid:2) HE 309-06T •• - •• P (cid:2)(cid:2) 8 8T6 - •• C •• A (cid:2)(cid:2) MS27473T •• C •• A (cid:2)(cid:2) HE 309-06T •• - •• P (cid:2)(cid:2) 8L 8T6 - •• C •• S (cid:2)(cid:2) MS27473T •• C •• S (cid:2)(cid:2) HE 309-06T •• - •• S (cid:2)(cid:2) 8 8T6 - •• C •• B (cid:2)(cid:2) MS27473T •• C •• B (cid:2)(cid:2) HE 309-06T •• - •• S (cid:2)(cid:2) 8L 8599-0902 M39029/58-360 PAN 6433-1P 8599-0903 M39029/58-363 8599-0904 M39029/58-364 s ol 8599-0905 M39029/58-365 s - to 88559999--00991101 MM3399002299//5577--335547 PAN 6433-1S g u 8599-0912 M39029/57-358 cts - filler pl 8888565596229022----0233918912903AA MMMM32229777044428889888/---52217206-359 PAN 6433-1N a 8599-0022 M81969/14-01 nt o 8522-20 M81969/14-02 C 8522-16 M81969/14-03 s 8LST ••• G01 HE 309-17 ••7 hell 8LST ••• B01 M85049/27 •• W ks 8LST ••• F01 M85049/27 •• N HE 309-17 ••6 c a B 99

8T Series Polarization Polarization is determined by the master keyway position. The secondary keyway positions remain fixed. view from front face of receptacle view from front face of plug service number of contacts angle in degrees contacts shell size layout M I II # 22D # 20 # 16 # 12 N A B C D Ø 0,76 Ø 1 Ø 1,6 Ø 2,4 08 35 X 6 100 82 - - 118 10 35 X 13 100 86 72 128 114 12 35 X 100 80 68 132 120 14 35 X 37 100 79 66 134 121 18 X 18 100 79 66 134 121 35 X 55 100 82 70 130 118 16 08 X 8 100 82 70 130 118 06 X 6 100 82 70 130 118 18 35 X 66 100 82 70 130 118 35 X 79 100 82 70 130 118 20 41 X 41 100 82 70 130 118 16 X 16 100 82 70 130 118 11 X 11 100 82 70 130 118 22 35 X 100 100 85 74 126 115 35 X 128 100 85 74 126 115 24 61 X 61 100 85 74 126 115 29 X 29 100 85 74 126 115 24 X 12 12 100 85 74 126 115 100

8T Series Dimensions backshells plug type 6 backnut type 01 straight cable clamp type 02 Ø for flange plug backshell assembly overall length shell size 08 10 12 14 16 18 20 22 24 D 1 Max 19.05 21.82 26.19 29.36 32.54 35.71 38.89 41.68 44.86 .750 .859 1.031 1.156 1.281 1.406 1.531 1.641 1.766 L1 Max 23.27 23.27 23.27 23.27 23.27 23.27 23.27 23.27 25.00 .916 .916 .916 .916 .916 .916 .916 .916 .984 D2 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 D3 Max 6.96 10.46 13.36 16.53 19.71 22.40 25.56 28.75 31.93 .274 .412 .526 .651 .776 .882 1.006 1.132 1.257 L2 Max 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 .445 .445 .445 .445 .445 .445 .445 .445 .445 L3 Max 25.16 25.16 25.16 25.16 25.16 25.16 25.16 25.16 27.14 .991 .991 .991 .991 .991 .991 .991 .991 1.069 elbow cable clamp type 03 D4 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 min 1.40 1.40 2.40 5.60 5.60 8.80 11.90 15.10 15.10 .055 .055 .094 .220 .220 .346 .469 .594 .594 D5 Max 3.20 4.80 6.40 9.50 12.70 15.90 19.10 22.20 25.40 .126 .189 .252 .374 .500 .626 .752 .874 1.000 F Max 21.03 22.63 25.81 28.98 30.56 37.31 37.31 42.06 44.45 .828 .891 1.016 1.141 1.203 1.469 1.469 1.656 1.750 L4 Max 22.22 22.22 22.22 28.57 28.57 28.57 28.57 31.75 31.75 .875 .875 .875 1.125 1.125 1.125 1.125 1.250 1.250 L5 Max 41.26 41.26 41.26 47.16 47.16 47.16 47.16 50.76 50.74 1.624 1.624 1.624 1.857 1.857 1.857 1.857 1.998 1.998 D6 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 min 3.20 4.00 4.80 5.50 6.40 7.90 9.50 10.30 14.30 .126 .157 .189 .217 .252 .311 .374 .406 .563 D7 Max 6.40 9.50 11.10 14.30 15.90 19.10 22.20 23.80 25.40 .252 .374 .437 .563 .626 .752 .874 .937 1.000 Ø for flange L6 Max 315.3.3921 315.3.3921 317.4.3609 411.6.6471 416.8.0143 416.8.4259 418.9.4037 521.0.9486 524.1.7587 L7 Max 25.40 26.19 27.79 30.96 32.54 34.14 34.93 34.53 43.66 1.000 1.031 1.094 1.219 1.281 1.344 1.375 1.359 1.719 L8 Max 48.82 48.82 50.80 55.17 59.54 59.95 61.93 65.48 70.26 1.922 1.922 2.000 2.172 2.344 2.360 2.438 2.578 2.766 101

8T Series backshells receptacle type 3 backnut type 01 Max. panel thickness with screws receptacle backshell assembly overall length shell size 08 10 12 14 16 18 20 22 24 B1 Max 21.03 24.23 26.59 28.98 31.34 33.73 36.91 40.08 43.26 .828 .954 1.047 1.141 1.234 1.328 1.453 1.578 1.703 straight cable clamp type 02 E1 15.09 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 Ø for flange .594 .719 .812 .906 .969 1.062 1.156 1.250 1.375 D1 Max 12.04 15.02 19.08 22.25 25.43 28.61 31.78 34.95 38.13 .474 .591 .751 .876 1.001 1.126 1.251 1.376 1.501 D2 Max 13.89 17.07 21.44 24.61 27.79 30.96 34.14 37.31 40.49 .547 .672 .844 .969 1.094 1.219 1.344 1.469 1.594 L1 Max 11.35 11.35 11.35 11.35 11.35 11.35 11.35 11.35 11.35 .447 .447 .447 .447 .447 .447 .447 .447 .447 L2 Max 12.27 12.27 12.27 12.27 12.27 12.27 12.27 12.27 14.00 .483 .483 .483 .483 .483 .483 .483 .483 .551 L3 Max 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 .069 .069 .069 .069 .069 .069 .069 .069 .069 J Max 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.99 .130 .130 .130 .130 .130 .130 .130 .130 .157 D3 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 D4 Max 6.96 10.46 13.36 16.53 19.71 22.40 25.56 28.75 31.93 .274 .412 .526 .651 .776 .882 1.006 1.132 1.257 L4 Max 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 .445 .445 .445 .445 .445 .445 .445 .445 .445 L5 Max 15.63 15.63 15.63 15.63 15.63 15.63 15.63 15.63 17.61 .615 .615 .615 .615 .615 .615 .615 .615 .693 elbow cable clamp type 03 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 Max .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 D5 1.40 1.40 2.40 5.60 5.60 8.80 11.90 15.10 15.10 min .055 .055 .094 .220 .220 .346 .469 .594 .594 D6 Max 3.20 4.80 6.40 9.50 12.70 15.90 19.10 22.20 25.40 .126 .189 .252 .374 .500 .626 .752 .874 1.000 F Max 21.03 22.63 25.81 28.98 30.56 37.31 37.31 42.06 44.45 .828 .891 1.016 1.141 1.203 1.469 1.469 1.656 1.750 L6 Max 22.22 22.22 22.22 28.57 28.57 28.57 28.57 31.75 31.75 .875 .875 .875 1.125 1.125 1.125 1.125 1.250 1.250 L7 Max 31.73 31.73 31.73 37.68 37.68 37.68 37.68 41.23 41.21 1.249 1.249 1.249 1.483 1.483 1.483 1.483 1.623 1.622 D7 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 3.20 4.00 4.80 5.50 6.40 7.90 9.50 10.30 14.30 min .126 .157 .189 .217 .252 .311 .374 .406 .563 D8 6.40 9.50 11.10 14.30 15.90 19.10 22.20 23.80 25.40 Max .252 .374 .437 .563 .626 .752 .874 .937 1.00 L8 Max 35.32 35.32 37.30 41.67 46.04 46.45 48.43 51.98 54.78 1.391 1.391 1.469 1.641 1.813 1.829 1.907 2.046 2.157 Ø for flange L9 Max 25.40 26.19 27.79 30.96 32.54 34.14 34.93 36.53 43.66 1.000 1.031 1.094 1.219 1.281 1.344 1.375 1.438 1.719 L10 Max 39.29 39.29 42.27 45.64 50.01 50.42 52.40 55.95 60.73 1.547 1.547 1.664 1.797 1.969 1.985 2.063 2.203 2.391 L11 Max 3.71 3.71 3.71 3.71 3.71 3.71 4.27 4.27 4.27 .146 .146 .146 .146 .146 .146 .168 .168 .168 102

8T Series Backshells Receptacle type 7 backnut type 01 Max. panel thickness: 2.8 .110 receptacle backshell assembly overall length straight cable clamp type 02 shell size 08 10 12 14 16 18 20 22 24 Ø for flange B1 Max 32.16 35.34 38.51 41.69 45.65 48.42 51.62 54.77 57.94 1.266 1.391 1.516 1.641 1.797 1.906 2.032 2.156 2.281 B2 Max 27.40 30.61 33.75 36.96 40.10 43.31 46.45 51.23 54.41 1.079 1.205 1.329 1.455 1.579 1.705 1.829 2.017 2.142 D1 Max 12.04 15.02 19.08 22.25 25.43 28.61 31.78 34.95 38.13 .474 .591 .751 .876 1.001 1.126 1.251 1.376 1.501 D2 Max 35.34 38.51 41.69 44.86 49.64 51.62 54.79 57.94 61.12 1.391 1.516 1.641 1.766 1.954 2.032 2.157 2.281 2.406 L1 Max 11.26 11.26 11.26 11.26 11.26 11.26 11.92 11.92 11.92 .443 .443 .443 .443 .443 .443 .469 .469 .469 L2 Max 12.55 12.55 12.55 12.55 12.55 12.55 11.73 11.73 13.08 .494 .494 .494 .494 .494 .494 .462 .462 .515 L3 Max 2.67 2.67 2.67 2.67 2.67 2.67 2.67 2.67 2.67 .105 .105 .105 .105 .105 .105 .105 .105 .105 D3 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 D4 Max 6.96 10.46 13.36 16.53 19.71 22.40 25.56 28.75 31.93 .274 .412 .526 .651 .776 .882 1.006 1.132 1.257 elbow cable clamp type 03 L4 Max 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 .445 .445 .445 .445 .445 .445 .445 .445 .445 L5 Max 14.44 14.44 14.44 14.44 14.44 14.44 13.62 13.62 15.22 .569 .569 .569 .569 .569 .569 .536 .536 .599 D5 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 1.40 1.40 2.40 5.60 5.60 8.80 11.90 15.10 15.10 min .055 .055 .094 .220 .220 .346 .469 .594 .594 D6 3.20 4.80 6.40 9.50 12.70 15.90 19.10 22.20 25.40 Max .126 .189 .252 .374 .500 .626 .752 .874 1.000 F Max 21.03 22.63 25.81 28.98 30.56 37.31 37.31 42.06 44.45 .828 .891 1.016 1.141 1.203 1.469 1.469 1.656 1.750 L6 Max 22.22 22.22 22.22 28.57 28.57 28.57 28.57 31.75 31.75 .875 .875 .875 1.125 1.125 1.125 1.125 1.250 1.250 L7 Max 30.54 30.54 30.54 36.44 36.44 36.44 35.62 39.22 38.82 1.202 1.202 1.202 1.435 1.435 1.435 1.402 1.544 1.528 D7 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 3.20 4.00 4.80 5.50 6.40 7.90 9.50 10.30 14.30 min .126 .157 .189 .217 .252 .311 .374 .406 .563 D8 Ø for flange 6.40 9.50 11.10 14.30 15.90 19.10 22.20 23.80 25.40 Max .252 .374 .437 .563 .626 .752 .874 .937 1.000 L8 Max 35.32 35.32 37.30 41.67 46.04 46.45 48.43 51.98 54.78 1.391 1.391 1.469 1.641 1.813 1.829 1.907 2.046 2.157 L9 Max 25.40 26.19 27.79 30.96 32.54 34.14 34.93 36.53 43.66 1.000 1.031 1.094 1.219 1.281 1.344 1.375 1.438 1.719 L10 Max 38.10 38.10 40.08 44.45 48.82 49.23 50.39 53.94 58.34 1.500 1.500 1.578 1.750 1.922 1.938 1.984 2.124 2.297 103

8T Series Backshells Cable connecting receptacle type 1 backnut type 01 cable connecting receptacle backshell assembly overall length straight cable clamp type 02 shell size 08 10 12 14 16 18 20 22 24 Ø for flange B1 Max 14.62 18.92 22.22 25.62 27.82 31.35 34.62 38.02 42.02 .576 .745 .875 1.009 1.095 1.234 1.363 1.497 1.654 D1 Max 12.04 15.02 19.08 22.25 25.43 28.61 31.78 34.95 38.13 .474 .591 .751 .876 1.001 1.126 1.251 1.376 1.501 D8 Max 13.89 17.07 21.44 24.61 27.79 30.96 34.14 37.31 40.49 .547 .672 .844 .969 1.094 1.219 1.344 1.469 1.594 J Max 24.51 27.60 30.04 32.43 34.82 37.21 40.36 43.56 46.68 .965 1.087 1.183 1.277 1.371 1.465 1.589 1.715 1.838 L1 Max 11.35 11.35 11.35 11.35 11.35 11.35 11.35 11.35 11.35 .447 .447 .447 .447 .447 .447 .447 .447 .447 L2 Max 12.27 12.27 12.27 12.27 12.27 12.27 12.27 12.27 14.00 .483 .483 .483 .483 .483 .483 .483 .483 .551 L3 Max 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 .069 .069 .069 .069 .069 .069 .069 .069 .069 D2 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 D3 Max 6.96 10.46 13.36 16.53 19.71 22.40 25.56 28.75 31.93 .274 .412 .526 .651 .776 .882 1.006 1.132 1.257 L4 Max 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 .445 .445 .445 .445 .445 .445 .445 .445 .445 L5 Max 15.63 15.63 15.63 15.63 15.63 15.63 15.63 15.63 17.61 elbow cable clamp type 03 .615 .615 .615 .615 .615 .615 .615 .615 .693 D4 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 1.40 1.40 2.40 5.60 5.60 8.80 11.90 15.10 15.10 min .055 .055 .094 .220 .220 .346 .469 .594 .594 D5 3.20 4.80 6.40 9.50 12.70 15.90 19.10 22.20 25.40 Max .126 .189 .252 .374 .500 .626 .752 .874 1.000 F Max 21.03 22.63 25.81 28.98 30.56 37.31 37.31 42.06 44.45 .828 .891 1.016 1.141 1.203 1.469 1.469 1.656 1.750 L6 Max 22.22 22.22 22.22 28.57 28.57 28.57 28.57 31.75 31.75 .875 .875 .875 1.125 1.125 1.125 1.125 1.250 1.250 L7 Max 31.73 31.73 31.73 37.68 37.68 37.68 37.68 41.23 41.21 1.249 1.249 1.249 1.483 1.483 1.483 1.483 1.623 1.622 D6 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 3.20 4.00 4.80 5.50 6.40 7.90 9.50 10.30 14.30 min .126 .157 .189 .217 .252 .311 .374 .406 .563 D7 6.40 9.50 11.10 14.30 15.90 19.10 22.20 23.80 25.40 Max .252 .374 .437 .563 .626 .752 .874 .937 1.000 Ø for flange L8 Max 35.32 35.32 37.30 41.67 46.04 46.45 48.43 51.98 54.78 1.391 1.391 1.469 1.641 1.813 1.829 1.907 2.046 2.157 L9 Max 25.40 26.19 27.79 30.96 32.54 34.14 34.93 36.53 43.66 1.000 1.031 1.094 1.219 1.281 1.344 1.375 1.438 1.719 L10 Max 39.29 39.29 42.27 45.64 50.01 50.42 52.40 55.95 60.73 1.547 1.547 1.664 1.797 1.969 1.985 2.063 2.203 2.391 104

8T Series Contacts Contact Contact type Part numbers size long spill male 8599-0720 22D long spill female 8599-7707 PL: Long spill short spill male 8599-0730 PC: short spill 20 short spill male 8599-0724 16 short spill male 8599-0726 shell size 08 10 12 14 16 18 20 22 24 #22D/#20 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 .028 .028 .028 .028 .028 .028 .028 .028 .028 A #16 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15 .045 .045 .045 .045 .045 .045 .045 .045 .045 male #22D PC/PL 13.40 13.40 13.40 13.40 13.40 13.40 13.40 13.40 13.40 .528 .528 .528 .528 .528 .528 .528 .528 .528 L1 female #22D PL 13.40 13.40 13.40 13.40 13.40 13.40 13.40 13.40 13.40 .528 .528 .528 .528 .528 .528 .528 .528 .528 male #20PC ; #16 PC 13.57 13.57 13.57 13.57 13.57 13.57 13.57 13.57 13.57 .534 .534 .534 .534 .534 .534 .534 .534 .534 PL #22D 8.50 8.50 8.50 8.50 8.50 8.50 8.50 8.50 8.50 .335 .335 .335 .335 .335 .335 .335 .335 .335 L2 PC #22D 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 .157 .157 .157 .157 .157 .157 .157 .157 .157 PC #20 / PC #16 5.10 5.10 5.10 5.10 5.10 5.10 5.10 5.10 5.10 .201 .201 .201 .201 .201 .201 .201 .201 .201 male #22D PC/PL 13.61 13.61 13.61 13.61 13.61 13.61 12.95 12.95 12.95 .536 .536 .536 .536 .536 .536 .510 .510 .510 L3 female #22D PL 13.61 13.61 13.61 13.61 13.61 13.61 12.95 12.95 12.95 .536 .536 .536 .536 .536 .536 .510 .510 .510 male #20 PC ; 16 PC 13.78 13.78 13.78 13.78 13.78 13.78 13.12 13.12 13.12 .543 .543 .543 .543 .543 .543 .517 .517 .51 Receptacle type 2 shell size 08 10 12 14 16 18 20 22 24 B1 Max 21.03 24.24 26.72 29.01 31.37 33.73 36.91 40.08 43.26 .828 .954 1.052 1.142 1.235 1.328 1.453 1.578 1.70 E1 15.10 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 .594 .719 .812 .906 .969 1.062 1.156 1.250 1.375 D1 Max 12.01 15.00 19.06 22.23 25.41 28.61 31.78 34.95 38.13 .473 .591 .750 .875 1.000 1.126 1.251 1.376 1.501 4 holes Ø J D2 Max 13.24 16.19 20.48 23.70 26.83 30.96 34.14 37.31 40.49 .521 .637 .806 .933 1.056 1.219 1.344 1.469 1.594 J Max 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.99 .130 .130 .130 .130 .130 .130 .130 .130 .157 L1 Max 11.35 11.35 11.35 11.35 11.35 11.35 11.35 11.35 11.35 .447 .447 .447 .447 .447 .447 .447 .447 .447 L2 Max 4.77 4.77 4.77 4.77 4.77 4.77 4.77 4.77 4.77 .188 .188 .188 .188 .188 .188 .188 .188 .188 L3 Max 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 .069 .069 .069 .069 .069 .069 .069 .069 .069 L4 Max 3.71 3.71 3.71 3.71 3.71 3.71 4.27 4.27 4.27 .146 .146 .146 .146 .146 .146 .168 .168 .168 105

8T Series Panel cut-out shell size 08 10 12 14 16 18 20 22 24 square flange receptacle jam nut receptacle d1 min 14.15 17.32 21.69 24.87 28.04 31.22 34.39 37.57 40.74 .557 .682 .854 .979 1.104 1.229 1.354 1.479 1.604 d2 22.46 25.58 28.80 31.98 35.15 38.28 41.50 44.68 47.85 .884 1.007 1.134 1.259 1.384 1.507 1.634 1.759 1.884 J 3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.91 .128 .128 .128 .128 .128 .128 .128 .128 .154 e 15.09 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 .594 .719 .812 .906 .969 1.062 1.156 1.250 1.375 P 21.08 24.26 27.53 30.68 33.86 37.06 40.03 43.21 46.38 .830 .955 1.084 1.208 1.333 1.459 1.576 1.701 1.826 Through bulkhead receptacle shell A Max B Max C Max D Max E Max F G Max H Max size 11.35 12.04 8.18 1.75 21.03 15.09 3.30 13.89 08 .447 .474 .322 .069 .828 .594 .130 .547 3 Max 4 holes ØG 10 11.35 15.02 8.18 1.75 24.23 18.26 3.30 17.07 .447 .591 .322 .069 .954 .719 .130 .672 C C 11.35 19.08 8.18 1.75 26.59 20.62 3.30 21.44 12 .447 .751 .322 .069 1.047 .812 .130 .844 14 11.35 22.25 8.18 1.75 28.98 23.01 3.30 24.61 .447 .876 .322 .069 1.141 .906 .130 .969 ØH ØB F 16 11.35 25.43 8.18 1.75 31.34 24.61 3.30 27.79 .447 1.001 .322 .069 1.234 .969 .130 1.094 11.35 28.61 8.18 1.75 33.73 26.97 3.30 30.96 18 .447 1.126 .322 .069 1.328 1.062 .130 1.219 A A E 20 11.35 31.78 8.18 1.75 36.91 29.36 3.30 34.14 .447 1.251 .322 .069 1.453 1.156 .130 1.344 D 22 11.35 34.95 8.18 1.75 40.08 31.75 3.30 37.31 .447 1.376 .322 .069 1.578 1.250 .130 1.469 24 11.35 38.13 8.18 1.75 43.26 34.92 3.98 40.49 .447 1.501 .322 .069 1.703 1.375 .157 1.594 Ordering information basic series SN1738 04 T •• •• PS N 7 shell type 04 - through bulkhead receptacle class T - sealed shell size 08-10-12-14-16-18-20-22-24 contact layout - see standard layout for 8T Series p 120 contact type PS - male/female contact polarization N - normal plating 7 - olive green cadmium Accessories protective caps basic series 8T E 01 G 14 cap type E - cap for receptacle F - cap for plug fixing type cap for receptacle cap for plug 01 - plastic sleeved metal cord with eyelet 01- plastic sleeved metal cord with eyelet 02 - plastic sleeved metal cord with ring plating B - olive green cadmium (MIL-C 38999) F - nickel shell size 08-10-12-14-16-18-20-22-24 106

8T Series Protective caps for receptacles shell d1 d2 A Max B Max C Max D Max L1 L2 size min min 08 19.05 20.83 18.29 20.83 3.12 22.61 76.20 76.20 .750 .820 .720 .820 .123 .890 3.000 3.000 10 21.82 20.83 21.59 20.83 3.12 25.65 76.20 76.20 .859 .820 .850 .820 .123 1.010 3.000 3.000 12 26.19 20.83 25.40 20.83 3.12 28.96 88.90 88.90 Type 01 Type 02 1.031 .820 1.000 .820 .123 1.140 3.500 3.500 14 29.36 20.83 28.70 20.83 3.12 32.00 88.90 88.90 1.156 .820 1.130 .820 .123 1.260 3.500 3.500 Protective caps for plugs 16 32.54 20.83 31.75 20.83 3.12 35.31 88.90 88.90 1.281 .820 1.250 .820 .123 1.390 3.500 3.500 18 35.71 20.83 35.05 20.83 3.12 38.35 88.90 88.90 1.406 .820 1.380 .820 .123 1.510 3.500 3.500 20 38.89 20.83 38.10 20.83 3.12 41.66 101.60 101.60 1.531 .820 1.500 .820 .123 1.640 4.000 4.000 22 41.68 20.83 41.40 20.83 3.12 44.70 101.60 101.60 1.641 .820 1.630 .820 .123 1.760 4.000 4.000 Type 01 24 414.7.8666 20.8.8230 414.7.4550 20.8.8230 3.1.5339 418.8.0910 1041.0.6000 1041.0.6000 Dummy receptacle shell part number L1 Max L3 MaxD1 MaxB1 Max E1 J size 08 8T3-08•UR 11.35 1.75 12.04 21.03 15.09 3.30 .447 .069 .474 .828 .594 .130 10 8T3-10•UR 11.35 1.75 15.02 24.23 18.26 3.30 .447 .069 .591 .954 .719 .130 12 8T3-12•UR 11.35 1.75 19.08 26.59 20.62 3.30 .447 .069 .751 1.047 .812 .130 14 8T3-14•UR 11.35 1.75 22.25 28.98 23.01 3.30 .447 .069 .876 1.141 .906 .130 16 8T3-16•UR 11.35 1.75 25.43 31.34 24.61 3.30 .447 .069 1.001 1.234 .969 .130 18 8T3-18•UR 11.35 1.75 28.61 33.73 26.97 3.30 .447 .069 1.126 1.328 1.062 .130 20 8T3-20•UR 11.35 1.75 31.78 36.91 29.36 3.30 .447 .069 1.251 1.453 1.156 .130 4 holes Ø J 22 8T3-22•UR 11.35 1.75 34.95 40.08 31.75 3.30 .447 .069 1.376 1.578 1.250 .130 24 8T3-24•UR 11.35 1.75 38.13 43.26 34.93 3.99 .447 .069 1.501 1.703 1.375 .157 • : G olive green cadmium F nickel Gaskets Plastic protective caps Part numbers Part numbers Shell size gasket for receptacle type 3 O. ring for receptacle type 7 Shell size cap for receptacles cap for plug (ordered separately) 08 8525-1431 MS9068-022 08 8500-5585A 8500-5594 10 8525-1432 MS9068-024 10 8500-5586A 71120 12 8525-1433 MS9068-026 12 8500-5587A 8500-5596 14 8525-1434 MS9068-028 14 8500-5588A 8500-5597 16 8525-1435 MS9068-029 16 8500-5589A 8500-5598 18 8525-1436 MS9068-030 18 8500-5590A 8500-5589 20 8525-1437 MS9068-031 20 8500-5591A 8500-5600 22 8525-1438 MS9068-032 22 8500-5592A 8500-5601 24 8525-1439 MS9068-033 24 8500-5593A 8500-5602 Reusable fixing plate Two, three or four-holes self-locking fixing-plates are available at SHTP. See page 126. 107

8D Aluminum Series Applications Description High density connectors for all military • High density connector from 1 to and aeronautical purposes with severe 128contacts vibration environment • Sizes 22D, 20, 16, 12, # 16 coax and # 8 triax • A quick screw coupling with anti- Standards decoupling mechanism • 100 % scoop proof MIL-C 38999 Series III - QPL approved Pr EN 3645 • An EMI/RFI reinforced shielding with grounding fingers Characteristics Electrical Climatic Mechanical • Test voltage (Vrms) • Temperature range : Service sea level at 21000 m - cadmium plating (W) -65°C +175°C • Shell : aluminum alloy M 1300 800 - nickel plating (F) -65°C +200°C • Plating : N 1000 600 • Sealing : mated connectors meet altitude - olive green cadmium (W) I 1800 1000 immersion requirements of MIL-C 38999 - nickel (F) II 2300 1000 • Salt spray to : MIL-STD 1344 method 1001 • Insulator : thermoplastic or thermoset • Contact resistance : - 500 hours (version W) • Grommet and seal : silicone elastomer resistance of wire included in measurement : - 48 hours (version F) • Contact : copper alloy - size 22 D : 14.6 mΩ - size 16 : 3.8 mΩ •Damp heat : MIL-C 38999 - 10 cycles • Plating : gold over nickel - size 20 : 7.3 mΩ - size 12 : 1.7 mΩ (24 hours) • Endurance : - size 8 : 3 mΩ Resistance to fluids 500 mating/unmating operations • Insulation resistance : ≥5000 MΩ(at 500 Vdc) • Shock : high impact as per MIL-S 901 • Contact rating : To MIL-C 38999 standard : • Vibration : - size 22 D : 5 A - size 16 : 13 A - Gasoline : JP5 (OTAN F44) - sine 60 g with temperature cycling - size 20 : 7.5 A - size 12 : 23 A - Mineral hydraulic fluid : MIL-H 5606 (OTAN and simulated accessory (36 hours) - size 8 : 45 A H515) - random : • Shell continuity : - olive green plating : 2.5 mΩ - Synthetic hydraulic fluid : skydrol 500 B4, 44.1 grms at high temperature - nickel plating : 1 mΩ LD4 (SAE AS 1241) 49.5 grms at ambient temperature • Shielding : - 65 db to 10 GHz (F) - Mineral lubricating : MIL-L 7870A • Contact retention (mini force in N) : - 50 db to 10 GHz (W) (OTAN 0142) - size 22 D : 45 N - size 20 : 67 N - 85 db to 1 GHz (F and W) - Synthetic lubricating : MIL-L 23699 - size 16 : 111 N - size 12 : 111 N • Triaxial contact : # 8 (OTAN 0156), MIL-L 7808 - size 8 : 111 N - bandwidth : 0 - 20 MHz - Cleaning fluid : MIL-C 25769 diluted - voltage rating : 500 Vac maxi. - De-icing fluid : MIL-A 8243 125 Vac at 21000 m - Extinguishing fluid : chlorobromethane - voltage drop : - Cooling fluid : Coolanol inner and middle contact ≤55 mV under 1A outer contact ≤75 mV under 12A Ordering information Part numbers basic series 8 D 0 - 11 W 35 P N *** shell type 0 - square flange receptacle 7 - jam nut receptacle 5 - plug with RFIshielding designator - - connectors with crimp contacts L - receptacle with long spill (male and female # 22D) C- receptacle with short spill (male and female # 22D - # 20 - # 16) S - receptacle with specific spill (male and female # 22D) W- receptacle with male contacts size 22D for wire wrap (3 wraps) T - receptacle with male contacts size 20 for wire wrap (2 wraps) shell size 09-11-13-15-17-19-21-23-25 plating W- olive green cadmium F - nickel contact layout - see table p 120 contact type P - male A - male connector supplied less contact or with specific contacts S - female B - female connector supplied less contact or with specific contacts polarization N- normal A-B-C-D-E- see table p 109 046 tinned straight spill 108

8D Aluminum Series MIL-C 38999 part numbers basic series D 38999/ 20 W B 35 P N shell type 20 - square flange receptacle 24 - jam nut receptacle 26 - plug with RFI shielding plating W - olive green cadmium F - nickel shell size Ato J 09 11 13 15 17 19 21 23 25 A B C D E F G H J contact layout - see table p 109 contact type P - male A - male connector supplied less contact or with specific contacts S - female B - female connector supplied less contact or with specific contacts polarization N - normal A-B-C-D-E- see table below Backshells basic series 8D 102 B 02 shell size 09 11 13 15 17 19 21 23 25 index number 101 102 103 104 105 106 107 108 109 plating B - olive green cadmium F - nickel backshell type 01 - backnut 02 - straight cable clamp 03 - elbow cable clamp 13 - backshell for heat shrink sleeving NOTE :Backshells will be marked with supplier’s part number. Labels will bear both part numbers : supplier’s and Souriau’s. Polarization shell MS angles N A B C D E size shell size viewed from face of receptacle A° 105 102 80 35 64 91 B° 140 132 118 140 155 131 9 A C° 215 248 230 205 234 197 D° 265 320 312 275 304 240 A° 95 113 90 53 119 51 B° 141 156 145 156 146 141 11 B C° 208 182 195 220 176 184 D° 236 292 252 255 298 242 A° 95 113 90 53 119 51 B° 141 156 145 156 146 141 13 C C° 208 182 195 220 176 184 D° 236 292 252 255 298 242 A° 95 113 90 53 119 51 B° 141 156 145 156 146 141 15 D C° 208 182 195 220 176 184 D° 236 292 252 255 298 242 A° 80 135 49 66 62 79 B° 142 170 169 140 145 153 17 E C° 196 200 200 200 180 197 viewed from front of plug D° 293 310 244 257 280 272 A° 80 135 49 66 62 79 B° 142 170 169 140 145 153 19 F C° 196 200 200 200 180 197 D° 293 310 244 257 280 272 A° 80 135 49 66 62 79 B° 142 170 169 140 145 153 21 G C° 196 200 200 200 180 197 D° 293 310 244 257 280 272 A° 80 135 49 66 62 79 B° 142 170 169 140 145 153 23 H C° 196 200 200 200 180 197 D° 293 310 244 257 280 272 A° 80 135 49 66 62 79 B° 142 170 169 140 145 153 25 J C° 196 200 200 200 180 197 D° 293 310 244 257 280 272 Note : Polarization A.B.C.D.E. consult us. 109

8D Aluminum Series Dimensions Receptacle type 0 MS shell size A Max B Max C Max D Thread E F G H J shell size 9 A 20.8.9203 10.4.6107 2.0.5908 M 12x 1-6g 23.9.8307 18.7.2169 15.5.0994 3.1.2258 5.2.4196 11 B 20.8.9203 10.4.6107 2.0.5908 M 15 x 1-6g 216.0.2301 20.8.6122 18.7.2169 3.1.2258 4.1.9934 13 C 20.8.9203 10.4.6107 2.0.5908 M 18 x 1-6g 218.1.6206 23.9.0016 20.8.6122 3.1.2258 4.1.9934 15 D 20.8.9203 10.4.6107 2.0.5908 M 22x 1-6g 311.2.0200 24.9.6619 23.9.0016 3.1.2258 4.1.3793 17 E 20.8.9203 10.4.6107 2.0.5908 M 25 x 1 -6g 313.3.3101 216.0.9672 24.9.6619 3.1.2258 4.1.9934 19 F 20.8.9203 10.4.6107 2.0.5908 M 28 x 1-6g 316.4.5307 219.1.3566 216.0.9672 3.1.2258 4.1.9934 21 G 20.7.1901 11.4.4409 3.1.2206 M 31 x 1-6g 319.5.7603 311.2.7550 219.1.3566 3.1.2258 4.1.9934 23 H 20.7.1901 11.4.4409 3.1.2206 M 34x 1-6g 412.6.9809 314.3.9735 311.2.7550 3.1.9514 6.2.1452 25 J 20.7.1901 11.4.4409 3.1.2206 M 37x 1-6g 416.8.0101 318.5.1000 314.3.9735 3.1.9514 6.2.1452 Receptacle type 7 .890 MS shell size A B Max C Max D Max E Max F G Thread shell size 9 A 16.6.5531 9.3.9900 3.1.2206 30.1.5206 24.9.0405 217.0.0603 M 12x1-6g 11 B 19.7.0571 9.3.9900 3.1.2206 35.1.2206 217.0.0603 311.2.8502 M 15x 1-6g 13 C 23.9.8328 9.3.9900 3.1.2206 38.1.4206 312.2.0600 314.3.9704 M 18x1-6g 15 D 216.0.9672 9.3.9900 3.1.2206 41.1.6206 316.4.0107 318.5.1000 M 22x1-6g 17 E 310.1.1857 9.3.9900 3.1.2206 44.1.8206 317.4.0507 411.6.3206 M 25x1-6g 19 F 313.3.3122 9.3.9900 3.1.2206 49.1.5206 411.6.0104 416.8.0101 M 28x1-6g 21 G 316.4.5307 9.3.9900 3.1.2206 52.1.7206 416.8.0101 419.9.2307 M 31x1-6g 23 H 319.5.6672 9.3.9900 3.1.2206 55.1.9206 510.9.0609 522.0.4603 M 34x1-6g 25 J 412.6.8857 9.3.9900 3.1.2206 59.1.0206 521.0.2137 525.1.6809 M 37x1-6g 110

8D Aluminum Series Receptacle with straight spill contacts Receptacle type 7 Receptacle type 0 Shell size 9 11 13 15 17 19 21 23 25 # 22D 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 .028 .028 .028 .028 .028 .028 .028 .028 .028 A # 20 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 .020 .020 .020 .020 .020 .020 .020 .020 .020 # 16 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15 .045 .045 .045 .045 .045 .045 .045 .045 .045 10.52 10.52 10.34 10.34 10.34 10.34 10.34 10.34 10.34 min .414 .414 .407 .407 .407 .407 .407 .407 .407 L2CM #22D 11.46 11.46 11.28 11.28 11.28 11.28 11.28 11.28 11.28 Max .451 .451 .444 .444 .444 .444 .444 .444 .444 10.19 10.19 10.01 10.01 10.01 10.01 10.01 10.01 10.01 min .401 .401 .394 .394 .394 .394 .394 .394 .394 L2CF #22D 11.46 11.46 11.28 11.28 11.28 11.28 11.28 11.28 11.28 Max .451 .451 .444 .444 .444 .444 .444 .444 .444 min 10.69 10.69 10.51 10.51 10.51 10.51 10.51 10.51 10.51 .421 .421 .414 .414 .414 .414 .414 .414 .414 L2CM #20 Max 11.63 11.63 11.45 11.45 11.45 11.45 11.45 11.45 11.45 .458 .458 .451 .451 .451 .451 .451 .451 .451 min 10.69 10.69 10.51 10.51 10.51 10.51 10.51 10.51 10.51 .421 .421 .414 .414 .414 .414 .414 .414 .414 L2CF #20 Max 11.63 11.63 11.45 11.45 11.45 11.45 11.45 11.45 11.45 .458 .458 .451 .451 .451 .451 .451 .451 .451 min 10.69 10.69 10.51 10.51 10.51 10.51 10.51 10.51 10.51 .421 .421 .414 .414 .414 .414 .414 .414 .414 L2CM #16 Max 11.63 11.63 11.45 11.45 11.45 11.45 11.45 11.45 11.45 .458 .458 .451 .451 .451 .451 .451 .451 .451 min 10.69 10.69 10.51 10.51 10.51 10.51 10.51 10.51 10.51 .421 .421 .414 .414 .414 .414 .414 .414 .414 L2CF #16 Max 11.63 11.63 11.45 11.45 11.45 11.45 11.45 11.45 11.45 .458 .458 .451 .451 .451 .451 .451 .451 .451 PL #22D 8.50 8.50 8.50 8.50 8.50 8.50 8.50 8.50 8.50 .335 .335 .335 .335 .335 .335 .335 .335 .335 PC #22D 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 L3 .157 .157 .157 .157 .157 .157 .157 .157 .157 PC #20 5.10 5.10 5.10 5.10 5.10 5.10 5.10 5.10 5.10 .201 .201 .201 .201 .201 .201 .201 .201 .201 PC #16 5.10 5.10 5.10 5.10 5.10 5.10 5.10 5.10 5.10 .201 .201 .201 .201 .201 .201 .201 .201 .201 min 9.48 9.48 9.48 9.48 9.48 9.48 9.59 9.59 9.59 .373 .373 .373 .373 .373 .373 .378 .378 .378 L4CM #22D Max 10.58 10.58 10.58 10.58 10.58 10.58 10.69 10.69 10.69 .417 .417 .417 .417 .417 .417 .421 .421 .421 min 9.15 9.15 9.15 9.15 9.15 9.15 9.26 9.26 9.26 .360 .360 .360 .360 .360 .360 .365 .365 .365 L4CF #22D Max 10.58 10.58 10.58 10.58 10.58 10.58 10.69 10.69 10.69 .417 .417 .417 .417 .417 .417 .421 .421 .421 min 9.65 9.65 9.65 9.65 9.65 9.65 9.76 9.76 9.76 .380 .380 .380 .380 .380 .380 .384 .384 .384 L4CM #20 Max 10.75 10.75 10.75 10.75 10.75 10.75 10.86 10.86 10.86 .423 .423 .423 .423 .423 .423 .428 .428 .428 min 9.65 9.65 9.65 9.65 9.65 9.65 9.76 9.76 9.76 .380 .380 .380 .380 .380 .380 .384 .384 .384 L4CF #20 Max 10.75 10.75 10.75 10.75 10.75 10.75 10.86 10.86 10.86 .423 .423 .423 .423 .423 .423 .428 .428 .428 min 9.65 9.65 9.65 9.65 9.65 9.65 9.76 9.76 9.76 .380 .380 .380 .380 .380 .380 .384 .384 .384 L4CM #16 Max 10.75 10.75 10.75 10.75 10.75 10.75 10.86 10.86 10.86 .423 .423 .423 .423 .423 .423 .428 .428 .428 9.65 9.65 9.65 9.65 9.65 9.65 9.76 9.76 9.76 min .380 .380 .380 .380 .380 .380 .384 .384 .384 L4CF #16 10.75 10.75 10.75 10.75 10.75 10.75 10.86 10.86 10.86 Max .423 .423 .423 .423 .423 .423 .428 .428 .428 CM : male contact CF : female contact PL : long spill PC : short spill 111

8D Aluminum Series Plug type 5 shell size MS A BThread C shell size Max Max 31.00 21.80 9 A M 12 x 1 - 6g 1.220 .858 31.00 25.00 11 B M 15 x 1 - 6g 1.220 .984 31.00 29.40 13 C M 18 x 1 - 6g 1.220 1.157 31.00 32.50 15 D M 22 x 1 - 6g 1.220 1.280 31.00 35.70 17 E M 25 x 1 - 6g 1.220 1.406 31.00 38.50 19 F M 28 x 1 - 6g 1.220 1.516 31.00 41.70 21 G M 31 x 1 - 6g 1.220 1.642 31.00 44.90 23 H M 34 x 1 - 6g 1.220 1.768 31.00 48.00 25 J M 37 x 1 - 6g 1.220 1.890 Through bulkhead receptacle shell A Max B C D Max E F G H J size (Special SHTP) 9 20.90 15.72 14.43 2.26 15.09 18.26 23.80 3.25 5.49 .823 .619 .568 .089 .594 .719 .937 .128 .216 D J 11 20.90 18.90 17.60 2.26 18.26 20.62 26.20 3.25 4.93 .823 .744 .693 .089 .719 .812 1.031 .128 .194 H 13 20.90 22.07 20.78 2.26 20.62 23.01 28.60 3.25 4.93 .823 .869 .818 .089 .812 .906 1.126 .128 .194 ØB ØC G 15 20.8.9203 25.9.2954 23.9.9453 2.0.2869 23.9.0016 24.9.6619 311.2.0200 3.1.2258 4.1.3793 17 20.90 30.00 28.35 2.26 24.61 26.97 33.30 3.25 4.93 .823 1.181 1.116 .089 .969 1.062 1.311 .128 .194 A A E 19 20.90 31.57 29.95 2.26 26.97 29.36 36.50 3.25 4.93 F .823 1.243 1.179 .089 1.062 1.156 1.437 .128 .194 Part number 21 20.10 34.75 33.12 2.97 29.36 31.75 39.70 3.25 4.93 .791 1.368 1.304 .177 1.156 1.250 1.563 .128 .194 basic series SN1843-13 W •• PS N 23 20.10 37.92 36.30 2.97 31.75 34.93 42.90 3.91 6.15 .791 1.193 1.429 .117 1.250 1.375 1.689 .154 .242 shell size 09-11-13-15-17-19-21-23-25 25 20.10 41.10 39.47 2.97 34.93 38.10 46.00 3.91 6.15 plating W - olive green cadmium .791 1.678 1.554 .117 1.375 1.500 1.811 .154 .242 contact layout please consult us contact type male/female contact polarization Panel cut-out shell 9 11 13 15 17 19 21 23 25 size A B C D E F G H J rear mounting front mounting A 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 38.10 A or G ØC A or G ØC .719 .812 .906 .969 1.062 1.156 1.250 1.375 1.500 G 15.09 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.94 .594 .719 .812 .906 .969 1.062 1.156 1.250 1.376 or G or G B min 16.66 20.22 23.42 26.59 30.96 32.94 36.12 39.29 42.47 A A .656 .796 .922 1.047 1.219 1.297 1.422 1.547 1.672 C 3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.91 3.91 .128 .128 .128 .128 .128 .128 .128 .154 .154 jam nut receptacle D min 13.11 15.88 19.05 23.01 25.81 28.98 32.16 34.93 37.69 ØE .516 .625 .750 .906 1.016 1.141 1.266 1.375 1.484 E 17.78 20.96 25.65 28.83 32.01 35.18 38.35 41.53 44.70 .700 .825 1.010 1.135 1.260 1.385 1.510 1.635 1.760 F 17.02 19.59 24.26 27.56 30.73 33.91 37.08 40.26 43.43 F .670 .771 .955 1.085 1.210 1.335 1.460 1.585 1.710 Maxi thickness of panel mounting for square flange receptacle - type 0 - front mounting : 3.2 mm Max. - rear mounting : 2.5 mm Max. 112

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S ouriau: MS27467T13B4S 8LST101B01 MS27468T17B35P MS27656T21B41S MS27468T15F35S MS27467T25B43SA MS27467T11B35S MS27468T13B35P 8LST106B02 8LST108B02 8LST101B02 MS27467T17B35S 8LT3L15B35PN 8LT3L9B35SN MS27467T23B55SA MS27468T23B55S MS27468T23B55P MS27467T21B35PA 8LT5-19B32PN MS27468T17B6P MS27468T25F35SA MS27656T11F98A MS27467T23B55PA MS27468T19B35P MS27656T25F35SBLC MS27468T23B55SA MS27467T23B35PA MS27505E17B35S MS27468T23B35SA MS27467T25B19PA MS27467T19B35S MS27468T23F35P MS27656T15B35S MS27467T11B98SA MS27468T21B41S 8LT5-09B98S MS27468T25B35S MS27656T13B4S MS27468E21B16S MS27468T25F61SA MS27468T15B35PA MS27468T13B98P 8LT7-19B32SN 8LT523Z54PN MS27467T19F32SA MS27468T11B35PA MS27468T25F61S MS27468T9F98PA MS27468T23B55PA MS27656T21B35PA MS27468T21B35P MS27467T21B16A MS27468T23B35PA MS27467T25B61S MS27497T8B35PD MS27656E25F35S MS27468T23F21PA MS27467T25B35SA MS27467T17F8P MS27467T9B35SA MS27467T11B99P MS27468T25B35A MS27484T16B35P MS27473E16F35S MS27468T15B35P MS27472E10F35P MS27467T21B35S MS27467T19F32S MS27467T23F53P MS27467T21B35P MS27468T11B99S MS27468T17B6PA MS27508E16F6S MS27656T25B35PC MS27467T13B98S MS27467T15F35P MS27468T11B99P MS27468E25F61P MS27467T25B35PA MS27467T23F35S MS27467T25F61SA MS27467T17B99SA MS27468T9F98P MS27467T11F98S MS27468T9B35S MS27467T17B6PA MS27468T17B35S MS27467T23B21S MS27484T12F98P MS27468T17F6P MS27467T23F35P MS27468T17F35S MS27484T18F32P 8LT7-13F35BN MS27656T23B35PA MS27656T25B19SA MS27467T15B19SA MS27467E23B35SA MS27467T9B35P MS27467T17B06S