SMD Inductors Large-Current Power Inductors MPLCG Overview Applications The KEMET MPLCG metal composite inductors are • Switching DC-DC power supplies ideal for use in DC to DC switching power supplies. The • Notebook computers MPLCG’s small size makes it ideal in applications with • Tablets tight space requirements. The combination of composite • Embedded computer systems core material and round wire allows these inductors to be • Servers and storage used in applications with high switching frequencies and • HDTVs where efficiency is important. Benefits • Metal composite powder • Operating temperature up to +125°C • High inductance • Low DCR • Low profile 3 mm maximum • Low core loss • Low accoustic noise Part Number System MPLCG 0530 L R22 Series Size Code Inductor Inductance Code µH MPLCG 0530 R = decimal point 0630 Examples: R22 = 0.22 µH 1R0 = 1.0 µH One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L9005_MPLCG • 10/19/2018 1 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

SMD Inductors Large-Current Power Inductors MPLCG Performance Characteristics Item Performance Characteristics Operating temperature –40°C to +125°C (including self-temperature rise) Rated inductance range 0.22 – 4.70 µH at 100 kHz, 1 mA Inductance tolerance ±20% Rated DC resistance range 2.7 – 74.0 mΩ maximum Rated current range 4.5 – 14.1 A Table 1 – Ratings & Part Number Reference Inductance (µH) Inductance DC Resistance Rated Current (A) Part Number at 100 kHz, 1 mA Tolerance (mΩ) Maximum Irms1 (Ref.) Isat2 (Ref.) MPLCG0530LR22 0.22 ±20% 3.7 14.1 10.2 MPLCG0530LR33 0.33 ±20% 7.3 10.3 8.9 MPLCG0530LR47 0.47 ±20% 8.4 9.5 8.9 MPLCG0530LR68 0.68 ±20% 11.6 7.9 6.8 MPLCG0530L1R0 1.00 ±20% 14.6 7.4 5.6 MPLCG0530L1R5 1.50 ±20% 21.7 5.9 5.6 MPLCG0530L2R2 2.20 ±20% 36.4 4.5 5.0 MPLCG0530L3R3* 3.30 ±20% 58.0 3.6 3.1 MPLCG0530L4R7* 4.70 ±20% 74.0 3.1 3.0 MPLCG0630LR22* 0.22 ±20% 2.7 21.4 17.9 MPLCG0630LR33* 0.33 ±20% 4.3 16.9 17.3 MPLCG0630LR47 0.47 ±20% 5.0 15.8 15.6 MPLCG0630LR68* 0.68 ±20% 6.0 14.2 12.6 MPLCG0630LR82* 0.82 ±20% 7.0 13.1 11.8 MPLCG0630L1R0 1.00 ±20% 9.0 11.9 11.3 MPLCG0630L1R5 1.50 ±20% 15.0 9.9 8.3 MPLCG0630L2R2 2.20 ±20% 19.0 8.2 7.8 MPLCG0630L3R3 3.30 ±20% 30.0 6.5 6.3 MPLCG0630L4R7 4.70 ±20% 41.0 5.5 5.4 1 T = 40 K rise at rated current. 2 Inductance drop 20% at rated current. * This part is not for new design. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L9005_MPLCG • 10/19/2018 2 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

SMD Inductors Large-Current Power Inductors MPLCG SMD Type DC-Superposed Characteristics LLaarrggee--CCuurrrreenntt PPoowweerr IInndduuccttoorrss MPLCG05 MMPPLLCCGG SSeerriieessMPLCG06 3.0 [[RRooHHSS CCoommpplliiaanntt]] SMD Type 2R2 5.0 1R5 LLaarrggee--CCuurrrreenntt PPoowweerr IInndduuccttoorrss 4R7 MMPPLLCCGG SSeerriieess 1R0 Model Iant d（1u0cμ0tHkaH）znce RDDCC （remsisΩ）tamnacxe. I(RrmeRfs.a)te ＊d3 1cRu3rrent（AI(Rs）eaf.t) ＊2 R68 MPLCG0530LR22 0.22±20% 3.7 14.1 10.2 MPLCG0530LR33 4.0 0.33±20% 7.3 10.3 2R2 8.9 µH) 2.0 [[RRooHHSS CCoommpplliiaanntt]] R47 MMPPLLCCGG00553300LL11RR05 11..05±±2200%% 1241..67 75..49 1R5 55..66 0°C ( R33 MMPPLLCCGG00563300LL12RR02 µH) 21..20±±2200%% 369..40 114..95 1R0 115..30 nce at 2 Model Iant d（1u0cμ0tHkaH）znce R22RDDCC （MMMMrePPPPmsLLLLisΩCCCC）tGGGGa0000mn6666ac3333xe0000.LLLL1423RRRR7532at 20°C ( 3.0 I(RrmeRfs.a)te ＊d 1cu 1234r....r5237e±±±±n22220000t（%%%%AI(Rs）eaf.t) ＊2 11345901....0000 9865....9255 R47 8765....3834 ducta MMPPLLCCGG00553300LLRR3223 00..2323±±2200%% ＊●O1p　eT=ra4t0iKn g terisme37p a..e73t rartauterde craunrgree:n －t.ance 　20＊～2+　12I0n(cid:31)d (Iuc11ta40..n13nccel dudreo ps 2e0l%f t aet mperartaetd1u 0c8r.e.29 urrirseen)t. In MMPPLLCCGG00553300LL11RR05 11..05±±2200%% 1241..67 duct 2.0 75..49 55..66 1.0 MPLCG0530L2R2 2.2±20% Shape and3 6D.i4mensions In　　 4.5 5.0 MMPPLLCCGG00663300LL11RR05 11..05±±2200%% 159..00 SMD T11y9..p99e 5.5 Maximum 118..33 3.0 Maximum (1.1) (1.1) ●MPLCG0530 SMD Type MPLCG0630L2R2 2.2±20% 19.0 8.2 7.8 MPLCG0630L3R3 3.3±20% 30.0 6.5 6.3 LLMLLMaaaa＊●PPOrrr1rp　egggLgLT=ra4eeCeeCt0iKn --g--MGG tCCCCePrism L euCSupu SuaeGt rrr0arererta6rrurtrerr3rdeeeee 0 ciirLaennen4nunrgRrstteest7t:n － t.PP　PP20＊～ooo2o+　12wIwww0n(cid:31)d (Iueeeectarrrrnn c ceIIIlI dunnnndreo pdddds 2e04l%ufuuu. t 7aet± ccccm2p0tttetr%aroootoaetdu rrcrrress ssurrirseen)t. 41.0 1.0 5.5 PLoatr tN Noo.. 5.45.0 ± 0.2 M[M[RRooPPHHSSLL CCCCoomGmGpp lSlSiiaaenenttr]r]iieess 2.5 ±0.2 (0.1) 2.5 ±0.2 [[RRooHHSSSh CaCpooe mmanpdp Dlliiiamanenntts]]ions 　　 0.0 5.5 Maximum 3.0 Maximum (1.1) (1.1)0.0 ●MPLCG0530 0 7.5 Maximum 5 3.0 Maximum 10 (1.4) (1.4)15 20 0 5 10 15 ●20MPLCG0630 MMMMMMMMMMMMMPPPPPPPPPPPPPLLLLLLLLLLLLLCCCCCCCCCCCCCMMGGGGGGGGGGGGGoo0000000000000dd5555565555566ee3333333333333ll0000000000000LLLLLLLLLLLLL11111RR211RR2RRRRRRRR32R320220203525035 DC CIIaa00n00nttu....1121 d11211 d（（231231....u2.5 ±0.2.....ur023023052005205ccμμr00±±±±±±±±±±±±±ttHHkeaka2222222222222H）H）0000000000000nzz%%%%%%%%n%%%%%ntcc ee(A)PLoatr tN Noo..RRDDDDCCCC （（rreemmss1231231iis416Ωs4165379Ω3795.0 ± 0.2.............））6746740730t730taammnnacac(xe0xe...1) 2.5 ±0.2I(I(111111RrRrmm401e401754e7549RRff.............s.as.a1391394954959))ttee ＊d＊d 11ccuu rrrreenntt（（AAI(I(1111RsRs））01018555e85558eaaf..f............t23.t23966096603)) ＊＊3.2 ±0.222 PLoatr tN Noo.. 6.7 ± 0.2 (0.1)DC Cu3.2 ±0.2rrent (A) DimensioMMMMMMnPPPPPPLLLLLLCCCsCCCGGGGGG000000666666333●333000000LLLLLLM142323RPRRRRR5L73232CG0630 123234......523237±±±±±±222222000000%%%%%% 7.5 Maximum 113134590901......000000 3.0 Maximum 986865......(9252551.4) (1.4)876765......383834 [mm] ＊1　T=40K MPrisLeC aGt 0ra6te3d0 cL4urRre7nt.　＊2　Inductance drop 204%. 7at± 20%rated current. 41.0 5.5 5.4 ●Ope rating temperature range: －20～+120(cid:31) (I nclude self temperature rise) Reccoommmmenedneddde Lda nLda nPda tPteatrtn ern ●MPLCG0630 C＊●O1pa　eSThs=raa4t0pieKne g a tneSrdism eDp iaietmz raertaenutesrdei o crnasun rgree:n －t.　　20＊～　2+　12I0n(cid:31)d (Iuctannccel dudreo ps 2e0l%f t Daet mipmerartaetdu ecre unrrirsPLeesn)oattr.i tN oNoo.n. s (m6.7 ± 0.2m) ●MPLCG0L5a30n d Pattern (mm) Shape a●ndM DPimLCeGn0si5o3n0s 　　 55..55 MM3.2 ±0.2aaxxiimmuumm 33..00 MMaaxxiimmuumm ((11..11)) ((11..11)) 3.2 ±0.2 ●MPLCG0530 (0.1) 2.82.8 3.53.5 MPLCGR0e5cco3omm0mmenedneddd●e LdaM nLdPa nLP2.5 ±0.22.5 ±0.2dCa tGPtea0tr5tn30e rPLPLnooaatrtr t tNN NNooo.o... 5.0 ± 0.25.0 ± 0.2 ((00..11)) 2.5 ±0.22.5 ±0.2 ●MPLCG0630 11..77 22..33 11..77 [mm] 22..00 3.7 22..00 7.5 Maximum 3.0 Maximum (1.4) (1.4) ●MPLCG0630 7.5 Maximum 3.0 Maximum (1.4) (1.4) ●MPLCG0630 MPLCG0630 2.82.8 3.2 ±0.23.2 ±0.2 PLPLooaatrtr t tNN NNooo.o... 6.7 ± 0.26.7 ± 0.2 ((00..11)) 3.2 ±0.23.2 ±0.2 P1o6wer Inductors VOL.13.53.51 [mm] 11..77 22..33 11..77 22..00 [mm] 3.7 22..00 Reccoommmmenedneddde Lda nLda nPda tPteatrtn ern ●MPLCG0630 ●MPLCG0530 Reccoommmmenedneddde Lda nLda nPda tPteatrtn ern ●MPLCG0630 ●MPLCG0530 Power Inductors VOL.11 16 2.82.8 3.53.5 2.82.8 3.53.5 11..77 22..33 11..77 22..00 3.7 22..00 11..77 22..33 11..77 22..00 3.7 22..00 Power Inductors VOL.11 P1o6wer Inductors VOL.11 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L9005_MPLCG • 10/19/2018 3 16 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

SMD Inductors Large-Current Power Inductors MPLCG Taping Specification Dimensions of indented square hole plastic tape P F T 0 P2 D E1 0 REEL 2R2 Lot No.Part No. W 1R5 REEL P 1 Reel dimensions W 2 Case Reel Dimensions (mm) DSimizeensionsQ oufa Ainndtietnyted squaCre hole pWlastic tapFe E P P P øD T 0 D 1 1 2 0 0 MPLCG0530T 3,500 TNoPole0mrainnacle ±120B..03P2A±50D.5.1 1±.07.15 F ±80.E0.11 ±20.0.1 ±40.0.1 ±10.5.055 ±00..045 0 REEL Tolerance ±0.3 ±0.1 ±0.1 ±0.1 ±0.1 ±0.1 ±0.05 ±0.05 MPLCG0630 2,000 Nominal 16.0 7.5 1.75 12.0 2.0 4.0 1.55 0.4 2R2 W1 Lot No.Part No. W 1R5 REEL Reel Specifications P 1 Reel dimensions W 2 A C 0 D B A W 1 Case Dimensions (mm) Size A B C D A r W W 0 1 2 Tolerance ±5.0 ±10.0 ±1.0 ±0.8 ±0.5 ±1.5 ±2.0 MPLCG0530 Nominal ø380 ø95 ø13.5 ø21.0 2.0 R1.0 14.5 18.5 Tolerance ±5.0 ±10.0 ±1.0 ±0.8 ±0.5 ±1.0 ±1.5 MPLCG0630 Nominal ø380 ø95 ø13.5 ø21.0 2.0 R1.0 18.0 21.6 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L9005_MPLCG • 10/19/2018 4 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

SMD Inductors Large-Current Power Inductors MPLCG Soldering Process Recommended Reflow Soldering Profile Reference ICP/JEDEC J-STD-020E Profile Feature Pb-Free Assembly T P Maximum ramp up rate = 3°C/second tP Preheat/Soak Maximum ramp down rate = 6°C/second Temperature minimum (TSmin) 150°C e TL tL Temperature maximum (T ) 200°C ur Time (t) from T to T Smax 60 – 120 seconds rat Tsmax s smin smax pe Ramp-up rate (TL to TP) 3°C/second maximum Tem Tsmin ts Liquidous temperature (T) 217°C L Time above liquidous (t) 60 – 150 seconds 25 L 25°C to Peak Peak temperature (T ) 250°C Time P Time within 5°C of maximum peak 30 seconds maximum temperature (t ) P Ramp-down rate (T to T) 6°C/second maximum P L Time 25°C to peak temperature 8 minutes maximum Handling Precautions Inductors should be stored in normal working environments. While the inductors themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70% relative humidity. Atmospheres should be free of chlorine and sulfur bearing compounds. Temperature fluctuations should be minimized to avoid condensation on the parts. For optimized solderability, inductors’ stock should be used promptly, preferably within six months of receipt. Export Control For customers in Japan For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. For customers outside Japan Inductors should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destruction weapons (nuclear, chemical, biological weapons or missiles), or any other weapons. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L9005_MPLCG • 10/19/2018 5 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

SMD Inductors Large-Current Power Inductors MPLCG KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L9005_MPLCG • 10/19/2018 6 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: K EMET: MPLCG0530LR22 MPLCG0530LR47 MPLCG0530L2R2 MPLCG0530LR33 MPLCG0630L1R5 MPLCG0630LR47 MPLCG0630L2R2 MPLCG0630L3R3 MPLCG0630L1R0 MPLCG0630L4R7 MPLCG0530L1R0 MPLCG0630L6R8