NOT FOR NEW DESIGN SMD Inductors Large-Current Power Inductors MPLC Overview The KEMET MPLC metal composite inductors offer large inductance values for use in DC to DC switching power supplies. These inductors offer superior permeability when compared to technologies based on ferrite cores. The round wire design allows for higher inductance compared to other wire designs. Applications • Switching DC-DC power supplies • Notebook computers • Tablets • Embedded computer systems • HDTVs • DVD and BluRay players Part Number System MPLC 0730 L 1R0 Series Size Code Inductor Inductance Code µH MPLC 0730 R = decimal point 1040 Example: 1R0 = 1.0 µH One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L9004_MPLC • 7/31/2018 1 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

SMD Type LLaarrggee--CCuurrrreenntt PPoowweerr IInndduuccttoorrss MMPPLLCC SSeerriieess [[RRooHHSS CCoommpplliiaanntt]] ･ Precautions (see page 80) Inductance Rated current（A） DC resistance Model at 100kHz, 1mA Irms ＊1 Isat ＊2 （μH） （mΩ） max. (Ref.) (Ref.) MPLC0730L1R0 1.0±20% 9.0 10.6 11.0 MPLC0730L1R5 1.5±20% 15.0 8.6 8.8 MPLC0730L2R2 2.2±20% 19.0 7.3 8.2 MPLC0730L3R3 3.3±20% 30.0 5.7 6.5 MPLC0730L4R7 4.7±20% 41.0 5.0 5.6 MPLC1040L1R0 1.0±20% 5.5 14.3 16.2 MPLC1040L1R5 1.5±20% 7.0 12.4 12.7 NOT FOR NEW DESIGN MPLC1040L2R2 2.2±20% 10.0 10.5 11.0 MPLC1040L3R3 3.3±20% 14.0 8.8 9.3 SMD InduMcPtoLCrs1040L4R7 4.7±20% 19.0 8.0 8.0 ＊L1　arTg=e40-KC ruisrer aetn ratt ePdo cuwrreenrt .I　nd＊u2c　toInrdsuc MtanPceL dCrop 20% at rated current. ●Operating temperature range: －20～+120(cid:31) (Include self temperat ure rise) Table 1 – Ratings & Part Number Reference Shape and Dimensions Recommended Land Pattern ●MPPLaCr0t7 N30u Smerbieesr Inductance (µH) Inductance DC ResistaMnPcLeC 0730 Series Rated Current (A) at 100 kHz Tolerance (mΩ) Maxim●um Irms1 (Ref.) Isat2 (Ref.) 7.7 Maximum MMPPLLCC00773300LL11RR50 11..50 ±±2200%% 3.2 ±0.1 195..00 3.5 180..66 181..80 MPLC0730L6.7 ±0.22R2 2.2 ±20% 19.0 7.3 8.2 MPLC0730L3R3 3.3 ±20% 30.0 5.7 6.5 MPLC0730L4R7 4.7 ±20% 41.0 2.05.0 3.9 2.05.6 (1.4) MPLC1040L1R0 1.30.0 Maximum ±20% 5.5 14.3 16.2 ●MPLC1040 Series MPLC1040 Series MPLC1040L1R5 1.5 ±20% ●7.0 12.4 12.7 11.5 Maximum MPLC1040L2R2 2.2 ±20% 10.0 10.5 11.0 MPLC1040L3R3 3.3 ±20% 4.0 ±0.1 14.0 4.6 8.8 9.3 MPLC1040L10.0 ±0.24R7 4.7 ±20% 19S.0MD Type 8.0 8.0 1 T = 40 K rise at rated current. SMD Type 2 Inductance drop 20% at rated current. (2.1) [mm] 3.8 6.0 3.8 LLaarrggee--CCuurrrreenntt PPoowweerr IIn4n.0 Mddaximuuumccttoorrss MMPPLLLLaaCCrrg g SSeeee--rCrCiiueuersrsrreenntt PPoowweerr IInndduuccttoorrss SMD Type DDCMMC-S-uPPSpeuLrLppoCCese r dSpS Coheeasrrraeciidteee rsiCssthicsaracteristics SMD Type [[RRooHHSS CCoommpplliiaanntt]] LLaarrggee--CCuurrrreenntt PPoowweerr IInndduuccttoorrss [[RRooHHSS CCoommpplliiaaMLLnnPtata]]LrrCgg07ee3--0CC uurrrreenntt PPoowweerr IInndduuccttoorrss MPLC1040 5.0 MMPPLLCC SSeerriieess 5.0 ･ Precautions (see page 80) 4.5 MMPPLLCC SSeerriieess 4.5 ･ PMMMMMrecPPPPPaLLLLLutCCCCCion00000sM77777 (MMMMs33333oe00000PPPPde LLLLLLLLLpea11234CCCClgRRRRR0000eM 777705237803333o)0000 dInductance (µH)LLLLe1123lRRRR05231122334.......･･0505050 PPrree[[c[c[RaRaRRuuttioiooooonnssHHHH a(MM(ssteeSSPP SeSe1 LLpp 0 aaCC CgCgC0C00IeenM M a77k8811234ooo0o033tHdoo（).....) 0005237md1mdmzmuLLee0,±±±±±μ11l cl0I1pRRHp22222pnpktm11230500000）Hldla（l....l%%%%%i0523Aiiziunaaa a,±±±±μ cc1nHn2222nntme0000）tattt%%%%A]]n]] ce 4aaRtt7 110000II3nnkk11RHdHd（（..305zuzu,±±μ,μ c c11H22Htmtm00））Daa%%2AA（nCnR 2cc rmeDee（1134ΩCs159019i） Rsrm.....5e0000t0113aΩs 5909in）ms....c000t0aae xnm 1.cRae0x . DD（（CC rrmmee1ΩsΩs59i）i）ss..0t0taa nmnmccaaeexx .. I(1rRm08755eI(1rR.f.... m0s6875.6370eInductance (µH)).f ...Rs6.637) ＊Ra1＊1122334a t1.......e t0505050edd cI( 1I(rRrRcm0m8uee.f.ufs6.s6.r)) rrRRre＊＊aea11n t tneet（t（dd AcAcI(）I(1usRu）1sR1ear8865r1ea886 rfrf.t.....t....ee.0 08256 )825)nn＊＊t（t（22 AAI(I(）1）sRsR1ea8ea ff.t.t..0 8 ))＊＊22 4R7 3R3 2R2 1R5 1R0 MMPPLLCC1100MM4400PPLLLL11CCRR0170053400LL41RR700.5 MMMMPPPPLLLLCCCC00007777113333..000005LLLL±±2311RR22RR41230500..%%70±±2200%% 2311....2305±±±±22220000%%%% 57..50415..05 1319059....0000 11421..4345..30 0.5 17508....3766 1116265....2726 18618....2508 MPLC10M40PLL2CR10240L1R50.00 MMMPPPLLLCCC0007772333.0002LLL±423R2RR17230.%55±20% 423...723±±±12220000%%% 10.07.0 15 413190...000 101.25.4 0.00 575...037 11152..07 586...625 10 15 20 MMPPLLCC1100MMM4400PPPLLLLL34CCCRR11100037444000LLL234RRR237 MMMMMMPPPPPPLLLLLLCCCCCC11101100070034444344..00000037LLLLLL±±112411RRR22RRR23405270500...%%237D±±±222C000 %%%Current (A)112411......052705±±±±±±222222 000000%%%%%% 1149..00111049...000 14057157......050050 881..08880...580 11111420425......345340 198198.....03030 D11111C621625 ......C270276urrent (A) ＊1　T=40K rise at rated current.　＊2　Inductance drop M2M0PP%LL aCCt 11ra00t44e0d0LL32RR32 current. 32..32±±2200%% 1140..00 180..85 191..30 ●Operating t＊●eDOm1p　peeriaTrat=mitn4ug0r Kete rremiasnpege naerta: tr uas－rtee2 dri0 ac～nougrre+e:n1 n 2－t.0　s2(cid:31)0 ＊(～I＊n2c+1　l　1u2IdTn0e=d(cid:31) 4us 0(ceIKntl afrc inMsltMMueced emPPPae tdLLLp rsrCaeCCoetr1epl11afd 0t002t ce4044um%0r00rp eLLLaen4t34tr .arRRR　at737t＊ed2　Inductance udrreop r i2s0e%u)r aect u rrirasr434teee...n)d737t.±±± 222000%%% current. 111949...000 888...080 898...030 ●Operating temperature range: －20～+120(cid:31) (Include self temperat ure rise) Power Inductors VOL＊.11　1T=40K rise at rated current.　＊2　Inductance drop 20% at rated current. ●Operating temperature range: －20～+120(cid:31) (Include self temperat ure rise) S●hMa1pP4eL aCnS0●dh7 MaD3p0iPme LS PaeCenn0radsi7e iD3ros0intm s SeNenrsiueiosmnsbeShrape and Dimensions Dimensions (mm) RecRMoemcPMoLmmPCeLm0nC7ed0n3e7d0d3e 0SLdR e aSeLrnceaLiodernmi sadePm sPanetantdtedteer ndrPn Laandt Ptaetterrnn 7.7 Maximu7m.7 MS●●ahxMMaimpPPuemLL aCCn00d77 3D300im SSeeenrrsiieeiossns7.7 Maximum ●● RecMM●omPPLLmCCe00n77d33e00d SSLeearrniiedes sPattern ●MPLC1●0M40P LSCe1ri0e4s06.7 ±0.2 MSerPieLs6.7 ±0.2C073●●0MMPPLLCC11004400 SS3ee.0rr iiMeeassx6.7 ±0.26.7 ±0.2im3u.0m Max1im71..7u5 m MMaaxxiimmuumm 33..00 MMaaxxiimmuumm3.2 ±0.1(1.4)3.2 ±0.1(1.4) 3.2 ±0.13.2 ±0.1((11M.●.44))PM●LCPL1C014004 S0e Sriee3.5rM●Msie3.5PPsLLCC11●00442.0002 .SS0eerriiee3.53.5ss 33.9.922..00 2233....0909 22..00 10.0 ±0.2MPL110.0 ±0.2C1.51 M0ax4im1u01m.5 Maximum 10.0 ±0.210.0 ±0.2 11.5 Maximum 4.0 Maximum4.0 ±0.1 4.0 ±0.1 4.0 ±0.14.0 ±0.1(2.1) [mm] 4.6●4.6 4.64.6 3.8 6.0 3.8 4.0 Maximum 4.0 Maximum(2.1)(2.1) [mm[]mm] (2.1) [mm] 3.83.8 66.0.03.8 336...880 3.8 DC-Superpos4e.0d MCahxaimraumcteristics DC-Superposed Characteristics ODCp-eSruapetripnogse tde Cmhapraecrteartisutirces range: −2M0P°LCC0 t7o30 + 120°C (Include self temperature riMsePL)C1040 DC-Superposed Characteristics 5.0 5.0 4.5MPLC0730 4.5MPLC1040 ©Fo rKtE L Inductance (µH)MauE12233445d........T50505050e MEr Inductance (µH)dlPeaLc0112233445lC..........e5050505050tr0,M o7FnP3LiL0 c3C s30 7C330o01r p UoSra4A Inductance (µH)RInductance (µH)t7 i•o001122334 001122334453.........9...........n05050505005050505050R30054 R•74 K-237RER236M61RE52-R2T28 T105R5DD5o0CCw CC•uue rrw1rrRree04 n4nwR•Rtt77 ((OAAw33))RRn3.3k1e1 0 0e 22ERRm22a1e1sRR55tt Inductance (µH). cBor11 12233445RRInductance (µH)o........m0050505050w11M501122334455a..........5050505050PrMdLC PB1LoC0u41l00e 4 Inductance (µH)Inductance (µH)v0a00112233400112233445r....................05050505005050505050d00 4R74R7553R33R3DDCC2 CCR22uuRrr2rree1114n04n0RR1Rt5t7R7 (5(AA33))RR33 1 R220RR22115511RR55 11RR002200 L9004_MPLC • 7/31/2018 2 1.0 0.0 1R0 1.0 0.0 1R0 0 5 10 15 0 5 10 15 20 0.5 0.5 Power InductoDrsC VCOuLrr.e1n1t (A) DC Current (A) 0.0 0.0 0 1P4owe5r Inductors VOL.1110 15 0 5 10 15 20 DC Current (A) DC Current (A) 14 Power Inductors VOL.11 14 Power Inductors VOL.11 14

NOT FOR NEW DESIGN SSMDM InDdu cTtoyrpse Large-Current Power Inductors MPLC Taping Specification MPLC0730 Series (1000pcs./reel) Dimensions of indented square hole plastic tape T P0 P2 D0 F E1 W F E1 P1 P2 P0 øD0 T[mm] REEL 0.3 0.1 0.1 0.1 0.1 0.1 0.05 0.05 24.0 11.5 1.75 16.0 2.0 4.0 1.55 0.4 Lot No.1R0L W SMD Type REEL P 1 Reel dimensions W [[mmmm]] 2 MPLC0730 Series (1000pcs./reel) Case Reel Dimensions (mＡm ) B C D A 0 r W 1 W2 5.0 5.0 0.5 0.8 0.5 0.5 0.5 DiSmizenesionsQ ouAf0 ainndteitnyted squCaDre hole pWlastic tapFe E1 P1 P2ø380 P0 ø80øD0 øT13.5 ø21.0 2.0 R1.0 25.5 29.5 MPLC0730 1T,000 TNoPole0mrainnacle ±1B60..03 PA2 ±70.D5.01 1±.07.15 F1±20E..101 ±20.0.1 W±40.0.1 ±10.F5.055 ±00..045E1 P1 P2 P0 øD0 T[mm] REELTolerance ±0.3 ±0.1 ±0.1 ±0.1 ±0.1 0.3±0.1 ±00..015 ±0.050.1 0.1 0.1 0.1 0.05 0.05 MPLC1040 500 24.0 11.5 1.75 16.0 2.0 4.0 1.55 0.4 Nominal 24.0 11.5 1.75 16.0 2.0 4.0 1.55 0.4 W1 Lot No.1R0L W Reel SpecificatioREEnL s MPLC1040 Series (500pcs./reePl1) Reel dimensions Dimensions of indented square holeW plastic tape [[mmmm]] 2 P0 F Ａ B C D A 0 r W 1 W[m2m] T P2 E1 5.0 5.0 0.5 0.8 0.5 0.5 0.5 A C D0 øW380 øF80 øE113.5 Pø121.0 P22.0 P0R1.0 øD025.5 T29.5 0 REEL D 0.3 0.1 0.1 0.1 0.1 0.1 0.05 0.05 B A 24.0 11.5 1.75 16.0 2.0 4.0 1.55 0.4 Lot No.1R0L W 3° REEL W 1 P1 Reel dimensions W2 [[mmmm]] Case Dimensions (mm) MPLC1040 Series (500pcs./reel) Size A B C D A Ａ2.0r B1W.0 WC0.5 D0.8 A0.50 r W 2.10 W3.20 Dimensions oAfT0 ionledreanntceed squCa±r5e.0 hole p±la5s.0tic tap±e0.5 ±0.8 ±0.05 ø330 ø±810.10 ±ø1.1203.5 ø21.0 2.0 R1.0 24.4 30.4 MPLC0730T Nominal P0øD330 Bø80PA2 ø13.0 ø21.0F E12.0 R1.0 17.5 21.5 [mm] Tolerance ±2.0 ±1.0 D±00.5 ±0.8 ±0.5 W  ±2.F0 ±3.0E1 P1 P2 P0 øD0 T MPLC1040 REEL 0.3 0.1 0.1 0.1 0.1 0.1 0.05 0.05 Nominal ø330 ø80 ø13.5 ø21.0 2.0 R1.0 24.4 30.4 24.0 11.5 1.75 16.0 2.0 4.0 1.55 0.4 W1 Lot No.1R0L W 3° REEL P1 Reel dimensions W2 [[mmmm]] Ａ B C D A 0 r W 1 W2 2.0 1.0 0.5 0.8 0.5 2.0 3.0 A0 C ø330 ø80 ø13.5 ø21.0 2.0 R1.0 24.4 30.4 D B A © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L9004_MPLC • 7/31/2018 3 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com W1 Power Inductors VOL.11 15 Power Inductors VOL.11 15

NOT FOR NEW DESIGN SMD Inductors Large-Current Power Inductors MPLC Handling Precautions Inductors should be stored in normal working environments. While the inductors themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70% relative humidity. Atmospheres should be free of chlorine and sulfur bearing compounds. Temperature fluctuations should be minimized to avoid condensation on the parts. For optimized solderability, inductors’ stock should be used promptly, preferably within six months of receipt. Export Control For customers in Japan For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. For customers outside Japan Inductors should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destruction weapons (nuclear, chemical, biological weapons or missiles), or any other weapons. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L9004_MPLC • 7/31/2018 4 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

NOT FOR NEW DESIGN SMD Inductors Large-Current Power Inductors MPLC KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L9004_MPLC • 7/31/2018 5 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: K EMET: MPLC1040L2R2 MPLC0730L1R5 MPLC1040L3R3 MPLC1040L1R5 MPLC0730L2R2 MPLC1040L4R7 MPLC0730L3R3 MPLC0730L4R7 MPLC0730L1R0 MPLC0730LR75