MMXZ5221B M C C (cid:1)(cid:2)(cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:5)(cid:8)(cid:8)(cid:9)(cid:4)(cid:3)(cid:2)(cid:10)(cid:11)(cid:6)(cid:7)omponents THRU TM 20736 Marilla Street Chatsworth Micro Commercial Components (cid:7)(cid:12)(cid:6)(cid:13)(cid:14)(cid:15)(cid:14)(cid:14) MMXZ5259B (cid:16)(cid:17)(cid:5)(cid:18)(cid:9)(cid:19)(cid:6)(cid:20)(cid:21)(cid:14)(cid:21)(cid:22)(cid:6)(cid:23)(cid:24)(cid:14)(cid:25)(cid:26)(cid:13)(cid:15)(cid:15) (cid:27)(cid:10)(cid:28)(cid:19)(cid:6)(cid:6)(cid:6)(cid:20)(cid:21)(cid:14)(cid:21)(cid:22)(cid:6)(cid:23)(cid:24)(cid:14)(cid:25)(cid:26)(cid:13)(cid:15)(cid:13) Features 200 mW (cid:1) Lead Free Finish/RoHS Compliant ("P" Suffix designates RoHS Compliant. See ordering information) Zener Diodes (cid:1) Planar Die construction (cid:1) Zener Voltages from 2.4V - 39V and 200mW Power Dissipation 2.4 to 39 Volts (cid:1) Ideally Suited for Automated Assembly Processes Mechanical Data - SOD 323 (cid:1) Epoxy meets UL 94 V-0 flammability rating (cid:1) Moisture Sensitivity Level 1 A (cid:1) Approx. Weight: 0.008 gram B (cid:1) Mounting Position: Any (cid:1) Storage & OperatingJunctionTemperature: -55oC to +150oC C E Maximum Ratings @ 25oC Unless Otherwise Specified Forward Current I 100 mA F Maximum Forward V 1.2 V F H Voltage D Power Dissipation P 200 mWatt (AV) (Notes A) G J Peak Forward Surge IFSM 2.0 Amps Current (Notes B) DIMENSIONS DIM INCHES MM NOTE NOTES: MIN MAX MIN MAX A .090 .107 2.30 2.70 A. Mounted on 5.0mm2(.013mm thick) land areas. B .063 .071 1.60 1.80 B. Measured on 8.3ms, single half sine-wave or equivalent C .045 .053 1.15 1.35 square wave, duty cycle = 4 pulses per minute maximum. D .031 .045 0.80 1.15 E .010 .016 0.25 0.40 G .004 .018 0.10 0.45 H .004 .010 0.10 0.25 J ----- .006 ----- 0.15 SUGGESTED SOLDER PAD LAYOUT 0.074" 0.027” 0.022” www.mccsemi.com Revision: A 1 o f 5 2011/01/01

M C C MMXZ5221B thru MMXZ5259B TM Micro Commercial Components Electrical Characteristics @ 25oC Unless Otherwise Specified NORMAL MAXIMUM ZENER MAXIMUM ZENER ZENER TEST IMPEDANCE MAXIMUM REVERSE VOLTAGE TEMP MCCPART VOLTAGE CURRENT Izt ‘B’ SUFFIX ONLY LEAKAGE CURRENT COEFFICIENT ‘B’ NUMBER Marking Vz@ Izt Zzt @ Izt Zzk @ Izk=0.25mA Ir @ Vr SUFFIX ONLY VOLTS mA OHMS OHMS uA VOLTS %/oC MMXZ5221B C1 2.4 20 30 1200 100 1.0 -0.085 MMXZ5222B C2 2.5 20 30 1250 100 1.0 -0.085 MMXZ5223B C3 2.7 20 30 1300 75 1.0 -0.080 MMXZ5225B C5 3.0 20 29 1600 50 1.0 -0.075 MMXZ5226B G1/D1 3.3 20 28 1600 25 1.0 -0.070 MMXZ5227BD23G.62/2024 1700151.0 -0.065 MMXZ5228B G3/D3 3.9 20 23 1900 10 1.0 -0.060 MMXZ5229B G4/D4 4.3 20 22 2000 5.0 1.0 ±0.055 MMXZ5230B G5/D5 4.7 20 19 1900 5.0 2.0 ±0.030 MMXZ5231B E1 5.1 20 17 1600 5.0 2.0 ±0.030 MMXZ5232B E2 5.6 20 11 1600 5.0 3.0 +0.038 MMXZ5234B E4 6.2 20 7.0 1000 5.0 4.0 +0.045 MMXZ5235B E5 6.8 20 5.0 750 3.0 5.0 +0.050 MMXZ5236B F1 7.5 20 6.0 500 3.0 6.0 +0.058 MMXZ5237B F2 8.2 20 8.0 500 3.0 6.5 +0.062 MMXZ5239B F4 9.1 20 10 600 3.0 7.0 +0.068 MMXZ5240B F5 10 20 17 600 3.0 8.0 +0.075 MMXZ5241B H1 11 20 22 600 2.0 8.4 +0.076 MMXZ5242B H2 12 20 30 600 1.0 9.1 +0.077 MMXZ5243B H3 13 9.5 13 600 0.5 9.9 +0.079 MMXZ5245B H5 15 8.5 16 600 0.1 11 +0.082 MMXZ5246B J1 16 7.8 17 600 0.1 12 +0.083 MMXZ5248B J3 18 7.0 21 600 0.1 14 +0.085 MMXZ5250B J5 20 6.2 25 600 0.1 15 +0.086 MMXZ5251B K1 22 5.6 29 600 0.1 17 +0.087 MMXZ5252B K2 24 5.2 33 600 0.1 18 +0.088 MMXZ5254B K4 27 4.6 41 600 0.1 21 +0.090 MMXZ5255B K5 28 4.5 44 600 0.1 21 +0.091 MMXZ5256B M1 30 4.2 49 600 0.1 23 +0.091 MMXZ5257B M2 33 3.8 58 700 0.1 25 +0.092 MMXZ5258B M3 36 3.4 70 700 0.1 27 +0.093 MMXZ5259B M4 39 3.2 80 800 0.1 30 +0.094 NOTE: 1.ToleranceandType Number Designation.The type numbers listed have a standard tolerance on the nominal zener voltage of ±5%. 2.Specials Available Include: A. Nominal zener voltages between the voltages shown and tighter voltage tolerances. B. Matched sets. 3.Zener Voltage (VZ) Measurement. Guarantees the zener voltage when measured at 90 seconds while maintaining the lead temperature (TL) at 30OC, from the diode body. 4.Zener Impedance (ZZ) Derivation. The zener impedance is derived from the 60 cycle ac voltage, which results when an AC current having an rms value equal to 10% of the dc zener current (IZT or IZK) is superimposed on IZT or IZK. 5.Surge Current (IR) Non-Repetitive. The rating listed in the electrical characteristics table is maximum peak, non-repetitive, reverse surge current of 1/2 square wave or equivalent sine wave pulse of 1/120 second duration superimposed on the test current, IZT, per JEDEC registration; however, actual device capability is as described in Figure 5. www.mccsemi.com 2 of 5 Revision: A 2011/01/01

MMXZ5221B thru MMXZ5259B M C C TM Micro Commercial Components 8 100 7 TEMPERATURECOEFFICIENT,mV/C)o --530624211 NERCUR,RENTmATEMPERATURECOEFFICIENT,mV/C)o 10 TA=25oC -32 3 4 5 6 7 8 9 10 11 12 ZE 110 100 NOMINALZENERVOLTAGE,Volts NOMINALZENERVOLTAGE,Volts TYPICALREVERSECURRENT STEADYSTZAENTEERPVOOWLTEARGED,EVoRltAsTING ZENERVOLTAGEV.S.ZENERCURRENT 1000 1000 TJ=25OC (cid:1) IZ(AC)=0.1IZ(DC) A MPEDANCE,100 IZ=15mmAA F=1kHZ CURRENT,m 100 YNAMICI 10 20mA FORWARD 10 150OC D 75OC 25OC 5OC 1 1 1 10 100 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 FORWARD VOLTAGE,Volts NORMALZENERVOLTAGE,Volts EFFECTOFZENERVOLTAGEONZENERIMPEDANCE TYPICALFORWARDVOLTAGE 1000 TA=25oC 1.2 0VBIAS 1VBIAS F p Watts 1.0 NCE, 100 SSIPATION, 00..86 CAPACITA 10 B50IA%SOAFTVZNOM DI ER 0.4 W PDV.S.TA O P 0.2 1 1 10 100 0 25 50 75 100 125 150 155 TEMPERATURE(oC) NOMINALZENERVOLTAGE,Volts STEADYSTATEPOWERDERATING TYPICALCAPACITANCE www.mccsemi.com Revision: A 3 o f 5 2011/01/01

M C C MMXZ5221B thru MMXZ5259B TM Micro Commercial Components 100 100 TA=25oC TA=25oC 10 10 A A m m T, T, N N E E R 1 R 1 R R U U C C R R E E N0.1 N 0.1 E E Z Z 0.01 0.01 0 2 4 6 8 10 12 10 30 50 70 90 ZENERVOLTAGE,Volts ZENERVOLTAGE,Volts ZENERVOLTAGEV.S.ZENERCURRENT ZENERVOLTAGEV.S.ZENERCURRENT 1000 A) 100 (cid:2) ( 10 T N E 1 R R +150OC U 0.1 C GE 0.01 AKA 0.001 +25OC E L 0.0001 -55OC 0.00001 0 10 20 30 40 50 60 70 80 90 NOMINALZENERVOLTAGE,Vlots TYPICALLEAKGECURRENT www.mccsemi.com Revision: A 4 o f 5 2011/01/01

M C C TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 3Kpcs/Reel ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: A 5 o f 5 2011/01/01 3