Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

M M 7 4 March 2008 H C MM74HCT08 T 0 8 Quad 2-Input AND Gate — Q u Features General Description a d ■ TTL, LS pin-out and threshold compatible The MM74HCT08 is a logic function fabricated by using 2 - ■ Fast switching: tPLH, tPHL = 12ns (typ.) advanced silicon-gate CMOS technology which provides In the inherent benefits of CMOS—low quiescent power p ■ Low power: 10µW at DC u and wide power supply range. This device is input and ■ High fan-out, 10 LS-TTL loads t output characteristic and pinout compatible with stan- A dard 74LS logic families. All inputs are protected from N D static discharge damage by internal diodes to V and CC G ground. a t MM74HCT devices are intended to interface between e TTL and NMOS components and standard CMOS devices. These parts are also plug-in replacements for LS-TTL devices and can be used to reduce power con- sumption in existing designs. Ordering Information Package Order Number Number Package Description MM74HCT08M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow MM74HCT08SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide MM74HCT08MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide MM74HCT08N N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number. All packages are lead free per JEDEC: J-STD-020B standard. Connection Diagram Logic Diagram Pin Assignments for DIP, SOIC, SOP and TSSOP ©1983 Fairchild Semiconductor Corporation www.fairchildsemi.com MM74HCT08 Rev. 1.3.0

M M Absolute Maximum Ratings(1) 7 4 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be H operable above the recommended operating conditions and stressing the parts to these levels is not recommended. C T In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. 0 The absolute maximum ratings are stress ratings only. 8 — Symbol Parameter Rating Q V Supply Voltage –0.5 to +7.0V u CC a V DC Input Voltage –1.5 to V +1.5V d IN CC 2 V DC Output Voltage –0.5 to V +0.5V - OUT CC I n I , I Clamp Diode Current ±20mA p IK OK u I DC Output Current, per pin ±25mA t OUT A ICC DC VCC or GND Current, per pin ±50mA N D T Storage Temperature Range –65°C to +150°C STG G PD Power Dissipation a t Note 2 600mW e S.O. Package only 500mW T Lead Temperature (Soldering 10 seconds) 260°C L Notes: 1. Unless otherwise specified all voltages are referenced to ground. 2. Power Dissipation temperature derating — plastic “N” package: –12mW/°C from 65°C to 85°C. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol Parameter Min. Max. Units V Supply Voltage 4.5 5.5 V CC V , V DC Input or Output Voltage 0 V V IN OUT CC T Operating Temperature Range –40 +85 °C A t , t Input Rise or Fall Times 500 ns r f ©1983 Fairchild Semiconductor Corporation www.fairchildsemi.com MM74HCT08 Rev. 1.3.0 2

M M DC Electrical Characteristics 7 V = 5V ± 10% (unless otherwise specified) 4 CC H C TA = –40°C TA = –55°C T T = 25°C to 85°C to 125°C 0 A 8 Symbol Parameter Conditions Typ. Guaranteed Limits Units — V Minimum HIGH Level 2.0 2.0 2.0 V Q IH u Input Voltage a d VIL Maximum LOW Level 0.8 0.8 0.8 V 2 Input Voltage - I n V Minimum HIGH Level V = V or V , V V – 0.1 V – 0.1 V – 0.1 V p OH IN IH IL CC CC CC CC u Output Voltage |IOUT| = 20µA t A V = V or V , 4.2 3.98 3.84 3.7 IN IH IL N |I | = 4.0mA, D OUT VCC = 4.5V G VIN = VIH or VIL, 5.2 4.98 4.84 4.7 ate |I | = 4.8mA, OUT V = 5.5V CC V Maximum LOW Level V = V , 0 0.1 0.1 0.1 V OL IN IH Voltage |I | = 20µA OUT V = V , 0.2 0.26 0.33 0.4 IN IH |I | = 4.0mA, OUT V = 4.5V CC V = V , 0.2 0.26 0.33 0.4 IN IH |I | = 4.8mA, OUT V = 5.5V CC I Maximum Input V = V or GND, ±0.1 ±1.0 ±1.0 µA IN IN CC Current V or V IH IL I Maximum Quiescent V = V or GND, 2.0 20 40 µA CC IN CC Supply Current I = 0µA OUT V = 2.4V or 0.5V(3) 1.2 1.4 1.5 mA IN Note: 3. This is measured per input with all other inputs held at V or ground. CC ©1983 Fairchild Semiconductor Corporation www.fairchildsemi.com MM74HCT08 Rev. 1.3.0 3

M M AC Electrical Characteristics 7 V = 5.0V, t = t = 6ns, C = 15pF, T = 25°C 4 CC r f L A H C Symbol Parameter Conditions Typ. Guaranteed Limit Units T 0 tPLH, tPHL Maximum Propagation Delay 9 15 ns 8 — Q AC Electrical Characteristics u a V = 5.0V ± 10%, t = t = 6ns, C = 50pF d CC r f L 2 T = –40°C T = –55°C -I A A n T = 25°C to 85°C to 125°C p A u Symbol Parameter Conditions Typ. Guaranteed Limits Units t A t , t Maximum Propagation 11 18 23 27 ns N PLH PHL D Delay G tTHL, tTLH Maximum Output Rise and 7 15 19 22 ns a Fall Time te C Power Dissipation (4) 38 pF PD Capacitance C Input Capacitance 5 10 10 10 pF IN Note: 4. C determines the no load dynamic power consumption. P = C V 2 f + I V and the no load dynamic PD D PD CC CC CC current consumption, I = C V f + I . S PD CC CC ©1983 Fairchild Semiconductor Corporation www.fairchildsemi.com MM74HCT08 Rev. 1.3.0 4

0.65 (cid:24)(cid:17)(cid:19)(cid:19)(cid:147)(cid:19)(cid:17)(cid:20)(cid:19) A 0.43TYP 14 8 B 6.4 (cid:23)(cid:17)(cid:23)(cid:19)(cid:147)(cid:19)(cid:17)(cid:20)(cid:19) 6.10 3.2 1.65 1 7 0.2 C B A PIN1IDENT TOPVIEW ALLLEADTIPS 0.45 RECOMMENDEDLANDPATTERN 1.2MAX SEEDETAILA +0.15 0.90 -0.10 0.20 (cid:19)(cid:17)(cid:20)(cid:19)(cid:147)(cid:19)(cid:17)(cid:19)(cid:24) 0.09 ALLLEADTIPS 0.30 0.19 C 0.1 C 0.65 0.13 A B C (cid:20)(cid:21)(cid:17)(cid:19)(cid:19)(cid:131)(cid:3)(cid:55)(cid:50)(cid:51)(cid:3)(cid:9)(cid:3)(cid:37)(cid:50)(cid:55)(cid:55)(cid:50)(cid:48) FRONTVIEW 0.09MIN NOTES: GAGEPLANE A.CONFORMSTOJEDECREGISTRATIONMO-153, VARIATIONAB,REFNOTE6 B.DIMENSIONSAREINMILLIMETERS. 0.25 0.09MIN C.DIMENSIONSAREEXCLUSIVEOFBURRS, (cid:19)(cid:131)(cid:16)(cid:3)(cid:27)(cid:131) (cid:19)(cid:17)(cid:25)(cid:147)(cid:19)(cid:17)(cid:20) MOLDFLASH,ANDTIEBAREXTRUSIONS SEATINGPLANE 1.00 D.DIMENSIONINGANDTOLERANCESPERANSI DETAILA Y14.5M,2009. E.LANDPATTERNSTANDARD:SOP65P640X110-14M. F.DRAWINGFILENAME:MKT-MTC14rev7.

None

8.75 A 8.50 7.62 14 0.65 8 14 8 B 4.00 6.00 5.60 3.80 1.70 1 7 PIN #1 1.27 0.51 1 7 IDENT. 1.27 0.35 (0.33) 0.25 M C B A LAND PATTERN RECOMMENDATION TOP VIEW 1.75 MAX A C 0.25 0.19 1.50 0.10 C 0.25 1.25 0.10 SIDE VIEW FRONT VIEW NOTES: A. CONFORMS TO JEDEC MS-012, VARIATION AB, ISSUE C B. ALL DIMENSIONS ARE IN MILLIMETERS 0.50 0.25 x 45 C. DIMENSIONS DO NOT INCLUDE MOLD FLASH OR BURRS R0.10 GAGE D. LAND PATTERN STANDARD: PLANE SOIC127P600X145-14M R0.10 E. CONFORMS TO ASME Y14.5M, 2009 0.36 D. DRAWING FILENAME: MKT-M14Arev14 8° 0° 0.90 0.50 SEATING PLANE (1.04) DETAIL A SCALE 16 : 1

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free ON Semiconductor Website: www.onsemi.com Literature Distribution Center for ON Semiconductor USA/Canada 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Europe, Middle East and Africa Technical Support: Order Literature: http://www.onsemi.com/orderlit Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Phone: 421 33 790 2910 Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Japan Customer Focus Center For additional information, please contact your local Email: orderlit@onsemi.com Phone: 81−3−5817−1050 Sales Representative © Semiconductor Components Industries, LLC www.onsemi.com www.onsemi.com 1

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: O N Semiconductor: MM74HCT08SJX MM74HCT08MTCX MM74HCT08SJ MM74HCT08MX MM74HCT08N MM74HCT08MTC MM74HCT08M