Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

M M 7 4 February 2008 H C 0 4 — MM74HC04 H Hex Inverter e x I n v Features General Description e r t ■ Typical propagation delay: 8ns The MM74HC04 inverters utilize advanced silicon-gate e r ■ Fan out of 10 LS-TTL loads CMOS technology to achieve operating speeds similar to LS-TTL gates with the low power consumption of stan- ■ Quiescent power consumption: 10µW maximum at dard CMOS integrated circuits. room temperature ■ Low input current: 1µA maximum The MM74HC04 is a triple buffered inverter. It has high noise immunity and the ability to drive 10 LS-TTL loads. The 74HC logic family is functionally as well as pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to V and ground. CC Ordering Information Package Order Number Number Package Description MM74HC04M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow MM74HC04SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide MM74HC04MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide MM74HC04N N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number. All packages are lead free per JEDEC: J-STD-020B standard. Connection Diagram Logic Diagram Pin Assignments for DIP, SOIC, SOP and TSSOP 1 of 6 Inverters Top View ©1983 Fairchild Semiconductor Corporation www.fairchildsemi.com MM74HC04 Rev. 1.3.0

M M Absolute Maximum Ratings(1) 7 4 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be H operable above the recommended operating conditions and stressing the parts to these levels is not recommended. C 0 In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. 4 The absolute maximum ratings are stress ratings only. — Symbol Parameter Rating H e V Supply Voltage –0.5 to +7.0V x CC I n VIN DC Input Voltage –1.5 to VCC+1.5V v e VOUT DC Output Voltage –0.5 to VCC+0.5V rt e IIK, IOK Clamp Diode Current ±20mA r I DC Output Current, per pin ±25mA OUT I DC V or GND Current, per pin ±50mA CC CC T Storage Temperature Range –65°C to +150°C STG P Power Dissipation D Note 2 600mW S.O. Package only 500mW T Lead Temperature (Soldering 10 seconds) 260°C L Notes: 1. Unless otherwise specified all voltages are referenced to ground. 2. Power Dissipation temperature derating — plastic “N” package: –12mW/°C from 65°C to 85°C. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol Parameter Min. Max. Units V Supply Voltage 2 6 V CC V , V DC Input or Output Voltage 0 V V IN OUT CC T Operating Temperature Range –40 +85 °C A t , t Input Rise or Fall Times r f VCC = 2.0V 1000 ns V = 4.5V 500 ns CC V = 6.0V 400 ns CC ©1983 Fairchild Semiconductor Corporation www.fairchildsemi.com MM74HC04 Rev. 1.3.0 2

M DC Electrical Characteristics(3) M 7 4 T = –40°C T = –55°C H A A C TA = 25°C to 85°C to 125°C 0 4 Symbol Parameter V (V) Conditions Typ. Guaranteed Limits Units CC — VIH Minimum HIGH Level 2.0 1.5 1.5 1.5 V H Input Voltage e 4.5 3.15 3.15 3.15 x 6.0 4.2 4.2 4.2 In v V Maximum LOW Level 2.0 0.5 0.5 0.5 V e IL r Input Voltage t 4.5 1.35 1.35 1.35 e r 6.0 1.8 1.8 1.8 V Minimum HIGH Level 2.0 V = V , 2.0 1.9 1.9 1.9 V OH IN IL Output Voltage |I | ≤ 20µA 4.5 OUT 4.5 4.4 4.4 4.4 6.0 6.0 5.9 5.9 5.9 4.5 V = V , 4.2 3.98 3.84 3.7 IN IL |I | ≤ 4.0mA OUT 6.0 V = V , 5.7 5.48 5.34 5.2 IN IL |I | ≤ 5.2mA OUT V Maximum LOW Level 2.0 V = V , 0 0.1 0.1 0.1 V OL IN IH Output Voltage |I | ≤ 20µA 4.5 OUT 0 0.1 0.1 0.1 6.0 0 0.1 0.1 0.1 4.5 V = V , 0.2 0.26 0.33 0.4 IN IH |I | ≤ 4.0mA OUT 6.0 V = V , 0.2 0.26 0.33 0.4 IN IH |I | ≤ 5.2mA OUT I Maximum Input 6.0 V = V or GND ±0.1 ±1.0 ±1.0 µA IN IN CC Current I Maximum Quiescent 6.0 V = V or GND, 2.0 20 40 µA CC IN CC Supply Current I = 0µA OUT Note: 3. For a power supply of 5V ±10% the worst case output voltages (V , and V ) occur for HC at 4.5V. Thus the 4.5V OH OL values should be used when designing with this supply. Worst case V and V occur at V = 5.5V and 4.5V IH IL CC respectively. (The V value at 5.5V is 3.85V.) The worst case leakage current (I , I , and I ) occur for CMOS at IH IN CC OZ the higher voltage and so the 6.0V values should be used. ©1983 Fairchild Semiconductor Corporation www.fairchildsemi.com MM74HC04 Rev. 1.3.0 3

M M AC Electrical Characteristics 7 V = 5V, T = 25°C, C = 15pF, t = t = 6ns 4 CC A L r f H C Guaranteed 0 Symbol Parameter Conditions Typ. Limit Units 4 — t , t Maximum Propagation Delay 8 15 ns PHL PLH H e x I n AC Electrical Characteristics v e VCC = 2.0V to 6.0V, CL = 50pF, tr = tf = 6ns (unless otherwise specified) rte r T = –40°C T = –55°C A A T = 25°C to 85°C to 125°C A Symbol Parameter V (V) Conditions Typ. Guaranteed Limits Units CC t , t Maximum 2.0 55 95 120 145 ns PHL PLH Propagation Delay 4.5 11 19 24 29 6.0 9 16 20 24 t , t Maximum Output 2.0 30 75 95 110 ns TLH THL Rise and Fall Time 4.5 8 15 19 22 6.0 7 13 16 19 C Power Dissipation (per gate) 20 pF PD Capacitance(4) C Maximum Input 5 10 10 10 pF IN Capacitance Note: 4. C determines the no load dynamic power consumption, P = C V 2 f + I V , and the no load dynamic PD D PD CC CC CC current consumption, I = C V f + I . S PD CC CC ©1983 Fairchild Semiconductor Corporation www.fairchildsemi.com MM74HC04 Rev. 1.3.0 4

0.65 (cid:24)(cid:17)(cid:19)(cid:19)(cid:147)(cid:19)(cid:17)(cid:20)(cid:19) A 0.43TYP 14 8 B 6.4 (cid:23)(cid:17)(cid:23)(cid:19)(cid:147)(cid:19)(cid:17)(cid:20)(cid:19) 6.10 3.2 1.65 1 7 0.2 C B A PIN1IDENT TOPVIEW ALLLEADTIPS 0.45 RECOMMENDEDLANDPATTERN 1.2MAX SEEDETAILA +0.15 0.90 -0.10 0.20 (cid:19)(cid:17)(cid:20)(cid:19)(cid:147)(cid:19)(cid:17)(cid:19)(cid:24) 0.09 ALLLEADTIPS 0.30 0.19 C 0.1 C 0.65 0.13 A B C (cid:20)(cid:21)(cid:17)(cid:19)(cid:19)(cid:131)(cid:3)(cid:55)(cid:50)(cid:51)(cid:3)(cid:9)(cid:3)(cid:37)(cid:50)(cid:55)(cid:55)(cid:50)(cid:48) FRONTVIEW 0.09MIN NOTES: GAGEPLANE A.CONFORMSTOJEDECREGISTRATIONMO-153, VARIATIONAB,REFNOTE6 B.DIMENSIONSAREINMILLIMETERS. 0.25 0.09MIN C.DIMENSIONSAREEXCLUSIVEOFBURRS, (cid:19)(cid:131)(cid:16)(cid:3)(cid:27)(cid:131) (cid:19)(cid:17)(cid:25)(cid:147)(cid:19)(cid:17)(cid:20) MOLDFLASH,ANDTIEBAREXTRUSIONS SEATINGPLANE 1.00 D.DIMENSIONINGANDTOLERANCESPERANSI DETAILA Y14.5M,2009. E.LANDPATTERNSTANDARD:SOP65P640X110-14M. F.DRAWINGFILENAME:MKT-MTC14rev7.

None

8.75 A 8.50 7.62 14 0.65 8 14 8 B 4.00 6.00 5.60 3.80 1.70 1 7 PIN #1 1.27 0.51 1 7 IDENT. 1.27 0.35 (0.33) 0.25 M C B A LAND PATTERN RECOMMENDATION TOP VIEW 1.75 MAX A C 0.25 0.19 1.50 0.10 C 0.25 1.25 0.10 SIDE VIEW FRONT VIEW NOTES: A. CONFORMS TO JEDEC MS-012, VARIATION AB, ISSUE C B. ALL DIMENSIONS ARE IN MILLIMETERS 0.50 0.25 x 45 C. DIMENSIONS DO NOT INCLUDE MOLD FLASH OR BURRS R0.10 GAGE D. LAND PATTERN STANDARD: PLANE SOIC127P600X145-14M R0.10 E. CONFORMS TO ASME Y14.5M, 2009 0.36 D. DRAWING FILENAME: MKT-M14Arev14 8° 0° 0.90 0.50 SEATING PLANE (1.04) DETAIL A SCALE 16 : 1

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free ON Semiconductor Website: www.onsemi.com Literature Distribution Center for ON Semiconductor USA/Canada 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Europe, Middle East and Africa Technical Support: Order Literature: http://www.onsemi.com/orderlit Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Phone: 421 33 790 2910 Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Japan Customer Focus Center For additional information, please contact your local Email: orderlit@onsemi.com Phone: 81−3−5817−1050 Sales Representative © Semiconductor Components Industries, LLC www.onsemi.com www.onsemi.com 1

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: O N Semiconductor: MM74HC04SJ MM74HC04MX MM74HC04M MM74HC04N MM74HC04MTCX MM74HC04MTC MM74HC04SJX