MKP1848S DC-Link www.vishay.com Vishay Roederstein Metallized Polypropylene Film Capacitors DC-Link Capacitor FEATURES • Slim line, low building height • Very long useful life time: Up to 100 000 h at U and 70 °C NDC • High ripple current capability, low ESR, low ESL • Temperature range: 105 °C • Mounting: Radial • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • PV micro inverters • LED street lighting • On board chargers (EV/HEV), battery chargers QUICK REFERENCE DATA Rated capacitance range 2 μF to 100 μF Capacitance tolerance 5 % Rated voltage range, U 500 V to 1000 V NDC Climatic testing class 40/105/56 Rated temperature 85 °C Maximum permissible case temperature 105 °C, observing voltage derating Maximum applicable peak to peak ripple voltage 0.2 x U NDC Reference standards IEC 61071, IEC 60068 Dielectric Polypropylene film Electrodes Metallized dielectric capacitor Construction Mono construction Encapsulation Plastic case sealed with resin; flame retardant Terminals Tinned wire Self inductance (L ) < 1 nH per mm of lead spacing S Withstanding DC voltage between terminals (1) 1.5 UNDC for 10 s, cut off current 10 mA, rise time  1000 V/s RC between leads, after 1 min > 10 000 s Insulation resistance For UNDC  500 V measuring voltage 100 V For U > 500 V measuring voltage 500 V NDC Useful life time: > 100 000 h at U and 70 °C Life time expectancy NDC FIT: < 10 x 10-9/h (10 per 109 component h) at 0.5 x U , 40 °C NDC C-value; tolerance; rated voltage; code for dielectric material; Marking code for manufacturing origin; manufacturer’s type designation; manufacturer’s logo; year and week of manufacture Notes • For more detailed data and test requirements, contact dc-film@vishay.com • For general information like characteristics and definitions used for film capacitors follow the link: www.vishay.com/doc?28147 (1) See document “Voltage Proof Test for Metalized Capacitors” (www.vishay.com/doc?28169) DC VOLTAGE RATINGS U at 85 °C 500 V 700 V 1000 V NDC U at 70 °C 600 V 800 V 1200 V OPDC U at 105 °C 350 V 500 V 750 V OPDC Revision: 19-Mar-13 1 Document Number: 26010 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MKP1848S DC-Link www.vishay.com Vishay Roederstein COMPOSITION OF CATALOG NUMBER MULTIPLIER CAPACITANCE P1 PITCH (nF) (numerically) (mm) CODE 10 4 27.5 K 100 5 Example: 37.5 P 1000 6 510 1000 nF 1 μF 52.5 Y 10 000 7 610 10 000 nF 10 μF 710 100 000 nF 100 μF PRODUCT HEIGHT CODE A (2) h = 12 mm MKP 1848 S 6 10 70 J P 4 B B h = 15 mm C h = 18 mm D (2) h = 20 mm TYPE CONSTRUCTION E (2) h = 22 mm F h = 24 mm METALLIZED POLYPROPYLENE VOLTAGE TOLERANCE SPECIAL CODE FOR TERMINAL U = 50 = 500 V J ± 5 % 2 2 pins N DC U = 70 = 700 V K ± 10 % 4 4 pins P2 = 10.2 mm N DC UN = 10 = 1000 VDC 5 4 pins P2 = 20.3 mm 6 6 pins P2 = 20.3 mm (1) Customized Notes (1) Tabs terminals or customized terminals are available on request (2) Product height on request Revision: 19-Mar-13 2 Document Number: 26010 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MKP1848S DC-Link www.vishay.com Vishay Roederstein DIMENSIONS in millimeters l w h lt Ø dt P1 P1 ± 0.5 mm It = 6 mm + 0 mm/- 1 mm P1 l w h lt Ø dt P1 P2 P1 and P2 ± 0.5 mm It = 6 mm + 0 mm/- 2 mm P2 P1 l w h Ø dt lt P1 P2 2 x P2 P1 and P2 ± 0.5 mm It = 6 mm + 0 mm/- 2 mm P2 P2 P1 Notes • Standard dimension • Ø dt ± 10 % of standard diameter specified Revision: 19-Mar-13 3 Document Number: 26010 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MKP1848S DC-Link www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE tan  DIMENSION (5) I (2) ESR (3) RMS 10 kHz UNDC HEIGHT CAP. (7) (mm) P1 P2 dV/dt IPEAK (A) (m) (< 10-4) (4) ORDERING CODE (1) (V) (mm) (μF) (mm) (mm) (V/μs) (A) 2 4 2 4 2 4 w h l PINS PINS PINS PINS PINS PINS 12 5 24.0 12.0 31.5 27.5 - 30 150 4 - 13 - 60 - MKP1848S55050JK2A 7 27.0 15.0 31.5 27.5 - 30 210 5 - 10 - 60 - MKP1848S57050JK2B 10 27.0 15.0 42.0 37.5 10.2 15 150 5 5 10 7.5 125 110 MKP1848S61050JP*B 15 33.0 15.0 42.0 37.5 10.2 15 225 6.5 7 7 5 125 110 MKP1848S61550JP*B 15 20 33.0 15.0 57.5 52.5 20.3 7 140 6 6.5 9.5 8 250 220 MKP1848S62050JY*B 30 45.0 15.0 57.5 52.5 20.3 7 210 8.5 9 6.5 5.5 250 220 MKP1848S63050JY*B 50 (6) 62.0 15.0 57.5 52.5 20.3 7 350 - 13.5 - 3.5 - 220 MKP1848S65050JY6B 10 24.0 18.0 42.0 37.5 10.2 15 150 5 5.5 10 7.5 125 110 MKP1848S61050JP*C 500 15 27.0 18.0 42.0 37.5 10.2 15 225 6.5 7 6.5 5 125 110 MKP1848S61550JP*C 18 20 39.0 18.0 42.0 37.5 10.2 15 300 8.5 9 5 4 125 110 MKP1848S62050JP*C 30 35.0 18.0 57.5 52.5 20.3 7 210 8 8.5 6.5 5.5 250 220 MKP1848S63050JY*C 50 50.0 18.0 57.5 52.5 20.3 7 350 - 12.5 - 3.5 250 220 MKP1848S65050JY5C 20 30.0 24.0 42.0 37.5 10.2 15 300 8.5 9 5 4 125 110 MKP1848S62050JP*F 30 39.0 24.0 42.0 37.5 10.2 15 450 11 12 3.5 2.5 125 110 MKP1848S63050JP*F 24 50 39.0 24.0 57.5 52.5 20.3 7 350 11.5 12.5 4 3.5 250 220 MKP1848S65050JY*F 100 (6) 70.0 24.0 57.5 52.5 20.3 7 700 - 22 - 2 - 220 MKP1848S71050JY6F 12 3 24.0 12.0 31.5 27.5 - 35 105 3.5 - 14 - 45 - MKP1848S53070JK2A 5 27.0 15.0 31.5 27.5 - 35 175 5 - 8 - 45 - MKP1848S55070JK2B 7 27.0 15.0 42.0 37.5 10.2 17 119 5 5 15 11.5 110 95 MKP1848S57070JP*B 10 33.0 15.0 42.0 37.5 10.2 17 170 6 6.5 11 8 110 95 MKP1848S61070JP*B 15 15 33.0 15.0 57.5 52.5 20.3 8 120 6 6.5 12 10 220 200 MKP1848S61570JY*B 20 45.0 15.0 57.5 52.5 20.3 8 160 8 8.5 9 7.5 220 200 MKP1848S62070JY*B 30 (6) 62.0 15.0 57.5 52.5 20.3 8 240 - 12 - 5 - 200 MKP1848S63070JY6B 7 24.0 18.0 42.0 37.5 10.2 17 119 5 5 15 11.5 110 95 MKP1848S57070JP*C 700 10 27.0 18.0 42.0 37.5 10.2 17 170 6 6.5 11 8 110 95 MKP1848S61070JP*C 18 15 39.0 18.0 42.0 37.5 10.2 17 255 8.5 9 7 5.5 110 95 MKP1848S61570JP*C 20 35.0 18.0 57.5 52.5 20.3 8 160 7.5 8 9 7.5 220 200 MKP1848S62070JY*C 30 50.0 18.0 57.5 52.5 20.3 8 240 - 11.5 - 5 - 200 MKP1848S63070JY5C 15 30.0 24.0 42.0 37.5 10.2 17 255 8.5 9 7 5.5 110 95 MKP1848S61570JP*F 20 39.0 24.0 42.0 37.5 10.2 17 340 10.5 11.5 6 4 110 95 MKP1848S62070JP*F 24 30 39.0 24.0 57.5 52.5 20.3 8 240 10.5 11 6 5 220 200 MKP1848S63070JY*F 50 (6) 70.0 24.0 57.5 52.5 20.3 8 400 - 18 - 3 - 200 MKP1848S65070JY6F Revision: 19-Mar-13 4 Document Number: 26010 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MKP1848S DC-Link www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE tan  DIMENSION (5) I (2) ESR (3) RMS 10 kHz UNDC HEIGHT CAP. (7) (mm) P1 P2 dV/dt IPEAK (A) (m) (< 10-4) (4) ORDERING CODE (1) (V) (mm) (μF) (mm) (mm) (V/μs) (A) 2 4 2 4 2 4 w h l PINS PINS PINS PINS PINS PINS 12 2 24.0 12.0 31.5 27.5 - 50 100 3 - 16 - 40 - MKP1848S52010JK2A 5 27.0 15.0 42.0 37.5 10.2 25 125 4.5 4.5 16 11.5 105 90 MKP1848S55010JP*B 7 33.0 15.0 42.0 37.5 10.2 25 175 5.5 6 12 8 105 90 MKP1848S57010JP*B 15 10 33.0 15.0 57.5 52.5 20.3 12 120 5.5 6 13 10 160 140 MKP1848S61010JY*B 15 45.0 15.0 57.5 52.5 20.3 12 180 7.5 8 9 6.5 160 140 MKP1848S61510JY*B 20 (6) 62.0 15.0 57.5 52.5 20.3 12 240 - 11 - 5 - 140 MKP1848S62010JY6B 3 24.0 18.0 42.0 37.5 10.2 25 75 3.5 3.5 27 19 105 90 MKP1848S53010JP*C 5 27.0 18.0 42.0 37.5 10.2 25 125 4.5 5 16 11.5 105 90 MKP1848S55010JP*C 1000 7 39.0 18.0 42.0 37.5 10.2 25 175 6.5 7 12 8 105 90 MKP1848S57010JP*C 18 10 39.0 18.0 42.0 37.5 10.2 25 250 7.5 8 8 6 105 90 MKP1848S61010JP*C 15 50.0 18.0 57.5 52.5 20.3 12 180 - 9 - 6.5 - 140 MKP1848S61510JY5C 20 50.0 18.0 57.5 52.5 20.3 12 240 - 10 - 5 - 140 MKP1848S62010JY5C 7 30.0 24.0 42.0 37.5 10.2 25 175 6.5 6.5 12 8 105 90 MKP1848S57010JP*F 10 39.0 24.0 42.0 37.5 10.2 25 250 8.5 9 8 6 105 90 MKP1848S61010JP*F 24 15 39.0 24.0 57.5 52.5 20.3 12 180 8 8.5 9 6.5 160 140 MKP1848S61510JY*F 20 39.0 24.0 57.5 52.5 20.3 12 240 9.5 10 7 5 160 140 MKP1848S62010JY*F 30 (6) 70.0 24.0 57.5 52.5 20.3 12 360 - 15.5 - 4 - 140 MKP1848S63010JY6F Notes (1) Change the * symbol with special code for the terminals (2) Maximum RMS current at 10 kHz, + 85 °C, t = + 15 °C, capacitance tolerlance  ± 5 % (3) Equivalent series resistance typical values at 10 kHz (4) Maximum tan  values (5) Standard dimension (6) 6 pins (7) Intermediate capacitance values available on request PACKAGING INFORMATION U HEIGHT CAP. (1) MASS SPQ (3) NDC Ø dt ORDERING CODE (1) (V) (mm) (μF) (g) (pcs) 12 5 0.8 MKP1848S55050JK2A 7 99 7 0.8 MKP1848S57050JK2B 10.5 90 10 1.0 MKP1848S61050JP*B 14 70 15 1.0 MKP1848S61550JP*B 18.5 56 15 20 1.2 MKP1848S62050JY*B 22.5 40 30 1.2 MKP1848S63050JY*B 31.5 30 50 (2) 1.2 MKP1848S65050JY6B 43 20 10 1.0 MKP1848S61050JP*C 15 77 500 15 1.0 MKP1848S61550JP*C 15.5 70 18 20 1.0 MKP1848S62050JP*C 25 49 30 1.2 MKP1848S63050JY*C 30.5 40 50 1.2 MKP1848S65050JY5C 41.5 25 20 1.0 MKP1848S62050JP*F 25 63 30 1.0 MKP1848S63050JP*F 32 49 24 50 1.2 MKP1848S65050JY*F 41.5 40 100 (2) 1.2 MKP1848S71050JY6F 78 20 Revision: 19-Mar-13 5 Document Number: 26010 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MKP1848S DC-Link www.vishay.com Vishay Roederstein PACKAGING INFORMATION U HEIGHT CAP. (1) MASS SPQ (3) NDC Ø dt ORDERING CODE (1) (V) (mm) (μF) (g) (pcs) 12 3 0.8 MKP1848S53070JK2A 6.5 99 5 0.8 MKP1848S55070JK2B 9 90 7 1.0 MKP1848S57070JP*B 12.5 70 10 1.0 MKP1848S61070JP*B 16 56 15 15 1.2 MKP1848S61570JY*B 21.5 40 20 1.2 MKP1848S62070JY*B 32.5 30 30 (2) 1.2 MKP1848S63070JY6B 43 20 7 1.0 MKP1848S57070JP*C 13 77 700 10 1.0 MKP1848S61070JP*C 15.5 70 18 15 1.0 MKP1848S61570JP*C 22 49 20 1.2 MKP1848S62070JY*C 29.5 40 30 1.2 MKP1848S62570JY5C 41.5 25 15 1.0 MKP1848S61570JP*F 21 63 20 1.0 MKP1848S62070JP*F 28.5 49 24 30 1.2 MKP1848S63070JY*F 39.5 40 50 (2) 1.2 MKP1848S65070JY6F 83 20 12 2 0.8 MKP1848S52010JK2A 11 99 5 1.0 MKP1848S55010JP*B 13 70 7 1.0 MKP1848S57010JP*B 16.5 56 15 10 1.2 MKP1848S61010JY*B 21.5 40 15 1.2 MKP1848S61510JY*B 30 30 20 (2) 1.2 MKP1848S62010JY6B 45 20 3 1.0 MKP1848S53010JP*C 16.5 77 5 1.0 MKP1848S55010JP*C 16 70 1000 7 1.0 MKP1848S57010JP*C 25.5 49 18 10 1.0 MKP1848S61010JP*C 21.5 49 15 1.2 MKP1848S61510JY5C 43.5 25 20 1.2 MKP1848S62010JY5C 43.5 25 7 1.0 MKP1848S57010JP*F 25 63 10 1.0 MKP1848S61010JP*F 33 49 24 15 1.2 MKP1848S61510JY*F 45.5 40 20 1.2 MKP1848S62010JY*F 39 40 30 (2) 1.2 MKP1848S63010JY6F 87 20 Notes (1) Intermediate capacitance values available on request (2) 6 pins (3) SPQ = Standard Packing Quantity Revision: 19-Mar-13 6 Document Number: 26010 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MKP1848S DC-Link www.vishay.com Vishay Roederstein CONSTRUCTION DESCRIPTION Low inductive wound cell elements of metallized polypropylene film, potted with resin in a flame retardant case. SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK The capacitor unit is designed for mounting on a printed circuit board. In order to withstand vibration and shock tests, it must be insured that the stand-off pips are in good contact with the printed circuit board. The capacitors shall be mechanically fixed by the leads and the body clamped. SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD FOR 2 PINS PRODUCTS The maximum space for length (l ), width (w ) and height (h ) of film capacitors to take in account on the printed circuit max. max. max. board is shown in the drawings. For products with pitch = 37.5 mm,  = 0.7 mm for l and w, and  = 0 mm for h For products with pitch = 52.5 mm,  = 1.0 mm for l and w, and  = 0 mm for h Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. w = w + Δ max. Eccentricity Imax. = I + Δ hmax. = h + Δ Seating plane SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD FOR MULTIPLE PINS PRODUCTS The product height with seating plane as given by “IEC 60717” as reference: h = h . The maximum length and width of film max. capacitors is shown in the figure. DIMENSIONS in millimeters w max. P2 2 x P2 ± 0.5 mm P1 Lmax. Ø D P1 L W Ø D H max. max. 37.5 I + 1.5 w + 1.8 1.5 h + 0.5 52.5 I + 1.8 w + 2.0 1.7 h + 0.5 SOLDERING CONDITIONS For general soldering conditions and wave soldering profile we refer to the document “Soldering Conditions Vishay Film Capacitors”: www.vishay.com/doc?28171 STORAGE TEMPERATURE Storage temperature: T = - 25 °C to + 35 °C with RH maximum 75 % without condensation stg RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply toan ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %. For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. Revision: 19-Mar-13 7 Document Number: 26010 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MKP1848S DC-Link www.vishay.com Vishay Roederstein CHARACTERISTICS %) 4 s) 105 C/C ( 23 RC ( Δ 1 0 - 1 104 - 2 - 3 - 4 - 5 - 6 103 - 60 - 40 - 20 0 20 40 60 80 100 120 0 20 40 60 80 100 Tamb (°C) Tamb (°C) Capacitance as a function of Insulation resistance as a function of ambient temperature (typical) ambient temperature (typical) V) 1.3 x. 1.6 (C ma ND 1.2 S 1.4 U M /PDC 1.1 al/IR 1.2 O n U 1.0 70 °C atio 1.0 er 0.9 85 °C Op 0.8 S 0.8 RM 0.6 I 0.7 0.4 105 °C 0.6 0.2 0.5 0 103 104 105 106 50 60 70 80 90 100 110 Lifetime Expectancy (h) Maximum Ambient Temperature (°C) Lifetime expectancy Maximum I current in function of RMS (typical) ambient temperature Ω) 10 Ω) 10 Z ( Pitch 27. 5 mm Z ( Pitch 52. 5 mm Pitch 37. 5 mm 1 1 0.1 0.1 5 μF 20 μF 10 μF 50 μF 0.01 20 μF 0.01 100 μF 30 μF 0.001 0.001 104 105 106 107 104 105 106 107 f (Hz) f (Hz) Impedance vs. Frequency Impedance vs. Frequency (typical) (typical) Revision: 19-Mar-13 8 Document Number: 26010 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MKP1848S DC-Link www.vishay.com Vishay Roederstein HEAT CONDUCTIVITY DIMENSION (mm) HEAT CONDUCTIVITY w h l (mW/°C) 24 12 31.5 21.5 27 15 31.5 26 27 15 42 33 33 15 42 38 24 18 42 33.5 27 18 42 36 39 18 42 47 30 24 42 45.5 39 24 42 54.5 33 15 57.5 48.5 45 15 57.5 61.5 62 15 57.5 80 35 18 57.5 55 50 18 57.5 72 39 24 57.5 68 70 24 57.5 106 POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The component temperature rise (T) can be measured or calculated by T = P/G: • T = T - T = Case temperature rise (°C) with a maximum of 15 °C at rated temperature. case ambient • P = I 2 x ESR = Power dissipation of the component (mW) RMS • G = Heat conductivity of the component (mW/°C) MEASURING THE COMPONENT TEMPERATURE Thermocouple The case temperature is measured in unloaded condition (T ) and loaded condition (T ). amb C To avoid external thermal radiation or convection, the capacitor must be tested in a closed area, free from air circulation. Revision: 19-Mar-13 9 Document Number: 26010 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MKP1848S DC-Link www.vishay.com Vishay Roederstein APPLICATION NOTES AND LIMITING CONDITIONS These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1.The continuous peak voltage (U ) shall not exceed the DC voltage rating (U ) p+ NDC 2.The peak-to-peak ripple voltage (U ) shall not be greater than 0.2 x U pp NDC Non reversing recurrent waveform e (V) Up+UNDC g olta Up- V t 3.For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information depending of the capacitance value and the number of parallel connections contact dc-film@vishay.com. 4.The voltage peak slope (dU/dt) shall not exceed the pulse slope at the DC voltage rating. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by U and divided NDC by the applied voltage. For all other pulses following equation must be fulfilled: T 2 x d----U---2 x dt < U x d----U--- dt NDC dt rated 0 T is the pulse duration MAXIMUM REPETITIVE PEAK VOLTAGES REPETITIVE SURGE VOLTAGE MAXIMUM DURATION PER DAY 1.1 x U 30 % of on load duration NDC 1.15 x U 30 min NDC 1.2 x U 5 min NDC 1.3 x U 1 min NDC 1.5 x U 110 ms NDC Note • The capacitor unit may be subjected to the following surge without any significant reduction of lifetime expectancy Revision: 19-Mar-13 10 Document Number: 26010 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MKP1848S DC-Link www.vishay.com Vishay Roederstein INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS ROUTINE TEST - FINAL INSPECTION 5.14.2-1 External inspection, visual examination Legible marking as specified 5.14.2-2 Dimensions See specification drawing 5.3-1 Capacitance 1 kHz at room temperature See specific reference data 5.3-2 tan  1 kHz at room temperature See specific reference data 10 kHz at room temperature 5.5.1-2 Voltage test between terminals 1.5 x U at T No visible damage or puncture NDC amb Duration: 10 s No flashover 5.7 Insulation resistance UNDC  500 V measuring voltage 100 V at See specific reference data room temperature U > 500 V measuring voltage 500 V at NDC room temperature Duration: 1 min TYPE TESTS 5.14.2 External inspection Check for finish, marking and overall Legible marking and finish as specified dimensions Dimensions: See specification drawing 5.14.0 Initial measurements Capacitance at 1 kHz tan  at 10 kHz 5.14.1-1/4 Robustness of terminations Tensile Ua1 IEC 60068-2-21 Wire diameter Section modulus Load  0.8 mm  0.5 mm2 10 N  1.25 mm  1.2 mm2 20 N Duration: 10 s ± 1 s Bending, Ub method 1 Wire diameter Section modulus Load  0.8 mm  0.5 mm2 10 N  1.25 mm  1.2 mm2 20 N 4 x 90°, duration: 2 s to 3 s/bend 5.14.1-6 Resistance to soldering heat No pre-drying, method 1A IEC 60068-2-20 Solder bath: 260 °C ± 5 °C Duration: 10 s ± 1 s 5.14.4 Final measurements Capacitance |C/C|  0.5 % tan  Increase of tan   0.0050 compared to the values measured in 5.14.0 5.14.0 Initial measurements Capacitance at 1 kHz tan  at 10 kHz 5.14.3-1 Vibration 10 Hz to 55 Hz; amplitude ± 0.35 mm or IEC 60068-2-6 acceleration 98 m/s2 Test duration: 10 frequency cycles 3 axes offset from each other by 90° 1 octave/min Visual examination No visible damage Revision: 19-Mar-13 11 Document Number: 26010 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MKP1848S DC-Link www.vishay.com Vishay Roederstein INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS 5.14.3-2 Shock or impact Pulse shape: half sine IEC 60068-2-6 Acceleration: 490 m/s2 Duration of pulse: 11 ms Visual examination No visible damage 5.14.4 Final measurements Capacitance |C/C|  0.5 % tan  Increase of tan   0.0050 compared to the values measured in 5.14.0 5.5.3-1 Initial measurements Capacitance at 1 kHz tan  at 10 kHz R insulation 5.5.3-2 Voltage test between terminals 1.5 x U at T NDC amb Duration: 60 s 5.5.3-3 Final measurements Capacitance |C/C|  0.5 % tan  Increase of tan   0.0050 R insulation R insulation  50 % of specified values 5.9-1 Initial measurements Capacitance at 1 kHz tan  at 10 kHz 5.9-2 Surge discharge test 1.1 x U NDC Number of discharges: 5 Time lapse: every 2 min (10 min total) 5.9-2 Voltage test between terminals Within 5 min after the surge discharge test Duration: 60 s 1.5 x U at T NDC amb 5.9-3 Final measurements Capacitance |C/C|  1.0 % tan  at 10 kHz tan   1.2 x initial tan  + 0.0001 compared to the values measured in 5.9-1 5.11-1 Initial measurements Capacitance at 1 kHz tan  at 10 kHz 5.11-2 Self healing test 1.5 x U NDC Duration: 10 s Number of clearings  5 Clearing = Voltage drop of 5 % increase the voltage at 100 V/s till 5 clearings occur with a max. of 2.5 x U NDC for a duration of 10 s 5.11-3 Final measurements Capacitance |C/C|  0.5 % tan  tan   1.2 x initial tan  + 0.0001 compared to the values measured in 5.11-1 Revision: 19-Mar-13 12 Document Number: 26010 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MKP1848S DC-Link www.vishay.com Vishay Roederstein INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS 5.13-0 Initial measurements Capacitance at 1 kHz tan  at 10 kHz 5.13-1 Change of temperature according to Test Nb IEC 60682-2-14 T = 85 °C max. T = - 40 °C min. Transition time: 1 h, equivalent to 1 °C/min 5 cycles 5.13-2 Damp heat steady state according to Test Ca IEC 60682-2-78 T = 40 °C + 2 °C max. RH = 93 % ± 3 % Duration: 56 days 5.5.3-2 Voltage test between terminals 1.5 x U at ambient temperature NDC Duration: 60 s 5.13-3 Final measurements Visual examination No puncturing or flashover Self healing punctures are permitted Capacitance |C/C|  2.0 % tan  at 1 VRMS 10 kHz Increase of tan   0.0150 compared to the values measured in 5.13-0 5.10.0 Initial measurements Capacitance at 1 kHz tan  at 10 kHz 5.10-1 Thermal stability test under overload Natural cooling T ± 5 °C amb conditions 1.21 x Pmax. = (U2/2) x W2 x C x tan  = 1.21 x (I2max./W2 x C) x tan  with W = 2 x p x f for I 2 2 max. (see specific reference data) f = 10 kHz 2 Duration: 48 h 5.10-2 Final measurements Measure the temperature every 1.5 h Temperature rise  1 °C during the last 6 h |C/C|  2.0 % Increase of tan   1.2 x initial  + 0.0150 5.12 Resonance frequency measurement Impedance analyser at T < 0.9 times the value as specified in typical amb curve “Resonant frequency” of this specification Revision: 19-Mar-13 13 Document Number: 26010 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MKP1848S DC-Link www.vishay.com Vishay Roederstein INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS 5.15-0 Initial measurements Capacitance at 1 kHz tan  at 10 kHz 5.15-1 Endurance test between terminals Sequence: 1.3 x U at 85 °C NDC 1.3 x U at 105 °C OPDC Duration: 500 h 1000 x discharge at 1.4 x I (maximum respective peak peak current in continuous operation) 1.3 x U at 85 °C NDC 1.3 x U at 105 °C OPDC Duration: 500 h 5.15-2 Final measurement Capacitance |C/C|  3.0 % tan  Increase of tan   0.0150 compared to the values measured in 5.15-0 5.16.3-0 Initial measurements Capacitance at 1 kHz 5.16.3-1 Desctruction test sequence T = 85 °C Audible healings or check healings with max. High DC voltage test Product enveloped with cheese cloth oscilloscope 3 x U for DC voltage NDC until repetitive product healings occur Duration = 15 min High AC voltage test AC RMS voltage = UNDC/2 2 with minimum of 250 V AC Duration = 5 min Repeat destruction sequence 3 x 5.16.3-2 Final measurements Visual examination No puncturing, flashover or burning of the cheese cloth Self healing punctures are permitted Note • Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, IEC-publication 61071” Revision: 19-Mar-13 14 Document Number: 26010 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: V ishay: MKP1848S53070JK2A MKP1848S55010JP2C MKP1848S55050JK2A MKP1848S57070JP2C MKP1848S61010JY2B MKP1848S61050JP2C MKP1848S61070JP2C MKP1848S61570JP2C MKP1848S62010JY5F MKP1848S62050JY2B MKP1848S62070JP2F MKP1848S62070JY5B MKP1848S63050JY5C MKP1848S63070JY5F MKP1848S65050JY5F MKP1848S55010JP4B