MENB1060 Universal Input 60 Watt Series Medical Switch-Mode Power Supply 3 Year Warranty •100-240VAC Universal Input •Meets EISA2007, CEC Efficiency Level V, EU (EC) No 278/2009 Phase II •Certified to UL/EN60601-1 •Desktop Style •5V to 24V Single Output Models, up to 60W •Modified and Custom Designs Available •Regulated Output with Low Ripple •Impact-Resistant Polycarbonate Enclosure •No Load Power Consumption <0.5W RoHS Specifications All Specifications are typical at nominal input, full load at 25°C unless otherwise stated. AC Input 100-240Vac, -/-10%, 47-63 Hz, 1∅ MTBF >100,000 hours (calculated) Input Current 100VAC: 1.5A max Hold-up Time 18 ms min. @ 115Vac, 60 ms min. @ 240 Vac Inrush Current 60 A peak, 264 V, cold start Overload Protection Hiccup Mode Input Fuse 2.0A, 250V Internal Primary Current Fuse is provided Short Circuit Protection Hiccup Mode Efficiency Meets EISA2007, CEC Efficiency Level V, Topology Switching – Fixed Frequency Flyback EU (EC) No 278/2009 Phase II Output Voltage See chart Safety Standards EN/IEC/CSA/UL60601-1 Output Power See chart EMC See chart below Ripple and Noise 1% pk-pk max., 20MHz BW Dielectric Withstand Input-Output: 5,656Vdc, Input-GND: 1,500 Vac, Output-GND: 500Vdc Line/Load Voltage Regulation Line: +/- 1%, Load: +/-5% Operating Temperature 0° to 40°C, no derating Transient Response 500µs max., 50% load step, typical Storage Temperature -30 to +85°C Minimum Load Not required Relative Humidity 5% to 95%, non-condensing Case Material Black 94V0 Polycarbonate Altitude 0 to 10,000 ft Case Dimensions See outline drawing Output Cable 5V – 9V models: #18AWG (UL2464), 1,200mm, 4 conductor 12V – 15V models: #18AWG (UL2464), 1,500mm, 4 conductor 18V – 24V models: #18AWG (UL2464), 1,500mm, 2 conductor Weight 400g Output Connector 5V model: Molex 39-01-2060 or equiv. (Ault #51) Other models: 2.5mm barrel type (Ault #3), center contact positive (+) EMC Specifications Conducted Emissions EN55011 Class B, FCC Part 15, Class B. Radiated Emissions EN55011 Class B, FCC Part 15, Class B. Line Frequency Harmonics EN61000-3-2, Class A Voltage Fluctuations/Flicker EN61000-3-3 Static Discharge Immunity EN61000-4-2, 6kV Contact Discharge, 8kV air discharge Radiated RF Immunity EN61000-4-3, 3V/m. EFT/Burst Immunity EN61000-4-4, 2kV/5kHz. Line Surge Immunity EN61000-4-5, 1kV differential, 2kV common-mode Conducted RF Immunity EN61000-4-6, 3Vrms Power Frequency Magnetic Field Immunity EN61000-4-8, 3A/m Voltage Dip Immunity EN61000-4-11, Criteria A ______________________________________________________________________________________________________________________________ 1 of 2 SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com

MENB1060 Universal 60 Watt Series Medical Switch Mode Power Supply 3 Year Warranty Model Number Volts (V) Output Current (max) Max Watts Ripple (Vp-p max) MENB1060A0551F01 5 V 7.00 A 35.0 W 50mV MENB1060A0903F01 9 V 6.00 A 54.0 W 90mV MENB1060A1203F01 12 V 5.00 A 60.0 W 120mV MENB1060A1503F01 15 V 4.00 A 60.0 W 150mV MENB1060A1803F01 18 V 3.40 A 61.2 W 180mV MENB1060A2403F01 24 V 2.70 A 64.8 W 240mV Model Number Key MENB 1 060AVV03F 01 Model "01" = Standard. "02" and higher indicates a modified model. Input Connector: "F" = IEC320 C14 grounded, Other options available, see next page. Output Connector: "03" = 2.5mm Barrel Type Connector. Other options available, contact factory. Output Voltage: "05" = 5Vdc, "12" = 12Vdc, "24" = 24Vdc, etc. Model "A" = Original Configuration Output Power: "060" = 60 Watts # of Outputs "1" = Single Output Product Family: "M" = Medical, "E" = External, "NB" = Model Series Designator Input Receptacle Options Output Connector Output Connector (5V Model) IEC320 C14 IEC320 C18 IEC320 C8 Grounded Ungrounded "Shaver" (F) (Q) (N) Pins 1,4 = (+), Pins 3,6 = (-) Outline Drawing DATE CODE Dimensions are in mm (Cable length is 1200mm on 5V thru 12V models) Data Sheet © 2010 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. Rev. 12-22-2010 However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. ______________________________________________________________________________________________________________________________ 2 of 2 SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com