E M C C o m p o n e n t s 3-terminal filters Cl Pb Br Signal line MEM series RoHS SRVEHCA-CFrHee HaFlroegeen LFereaed MEM2012V type FEATURES Multilayer chip EMC filter. Monolithic structure makes it highly reliable. Closed magnetic circuit structure makes it possible to achieve high-density mounting without crosstalk. Has sharp attenuation characteristics with excellent EMC suppression. Wide range of products compatible with passing frequencies and attenuating frequencies. Double  type circuit is used. Sharp attenuation characteristics. Operating temperature range: –40 to +85°C APPLICATION Noise removal from signal lines of data terminals, digital cameras, computers, game machines, flat TVs, etc. Application guides: Smart phones/tablets PART NUMBER CONSTRUCTION MEM 2012 V 121R T 001 L×W×T dimensions Product internal Cutoff frequency Series name Packaging style Internal code 2.0×1.25×0.85 mm code (MHz) CHARACTERISTICS SPECIFICATION TABLE Cutoff frequency Insertion loss Rated voltage Rated current Part No. (MHz) (dB) (V)max. (mA)max. 120 20 [200MHz to 2GHz] 10 100 MEM2012V121RT001 150 20 [250MHz to 2GHz] 10 100 MEM2012V151RT001 180 20 [300MHz to 2GHz] 10 100 MEM2012V181RT001 210 20 [350MHz to 2GHz] 10 100 MEM2012V211RT001 240 20 [450MHz to 2GHz] 10 100 MEM2012V241RT001 300 20 [550MHz to 2GHz] 10 100 MEM2012V301RT001 Measurement equipment Measurement item Product No. Manufacturer Frequency characteristics N5230C Keysight Technologies ＊Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (1/4) Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190207 3tf_commercial_signal_mem2012v_en.fm

E M C C o m p o n e n t s MEM2012V type INSERTION LOSS VS. FREQUENCY CHARACTERISTICS 0 10 121R 20 301R )B 151R d (s 30 181R s o 211R n l ertio 40 241R s n I 50 60 70 1 10 100 1000 10000 Frequency (MHz) Measurement equipment Product No. Manufacturer N5230C Keysight Technologies ＊Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (2/4) Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190207 3tf_commercial_signal_mem2012v_en.fm

E M C C o m p o n e n t s MEM2012V type SHAPE & DIMENSIONS PACKAGING STYLE 2±0.2 REEL DIMENSIONS GND 4 2.0±0.5 E 0.1min. ±1.250.2 1 2 3 IN/OUT GND OUT/IN 0.2min 0.2min n. mi 0 ±0.850.15 ø6 1.0 0.4±0.15 0.4±0.15 0.4±0.15 Dimensions in mm ø13±0.2 8.4+–02..00 ø21±0.8 14.4max. ø180±2.0 RECOMMENDED LAND PATTERN Dimensions in mm TAPE DIMENSIONS 2 1 5 1 0 Sprocket 0. 0. 0.4 hole 1.5+–00.1 2.0±0.05 4.0±0.1 1.75± 3.5± 1.4 3 1.6 0. ± 3 B 8.0 Dimensions in mm K A Cavity 4.0±0.1 Dimensions in mm CIRCUIT DIAGRAM Type A B K MEM2012V 1.55±0.20 2.30±0.20 1.10max. 160min. Taping 200min. GND RECOMMENDED REFLOW PROFILE Drawing direction 300min. Preheating Soldering Natural cooling Peak Dimensions in mm 250 to 260°C PACKAGE QUANTITY e 230°C 230°C Package quantity 4,000 pcs/reel ur at er p m TEMPERATURE RANGE, INDIVIDUAL WEIGHT e 180°C T 10s max. Operating Storage Individual 150°C temperature range temperature range weight –40 to +85 °C –40 to +85 °C 8 mg 60 to 120s 30 to 60s  The storage temperature range is for after the assembly. Time Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (3/4) Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190207 3tf_commercial_signal_mem2012v_en.fm

E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equip- ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip- ment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual- ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (8) Public information-processing equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (9) Military equipment (3) Medical equipment (10) Electric heating apparatus, burning equipment (4) Power-generation control equipment (11) Disaster prevention/crime prevention equipment (5) Atomic energy-related equipment　　 (12) Safety equipment (6) Seabed equipment (13) Other applications that are not considered general-purpose (7) Transportation control equipment applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing pro- tection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (4/4) Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190207 3tf_commercial_signal_mem2012v_en.fm