E M C C o m p o n e n t s September 2015 3-terminal Filters For signal line MEM Series MEM2012S Type MEM2012S 2012[0805 inch]* * Dimensions Code JIS[EIA]

(2/7) E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. REMINDERS The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/Aviation equipment (8) Public information-processing equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (9) Military equipment (3) Medical equipment (10) Electric heating apparatus, burning equipment (4) Power-generation control equipment (11) Disaster prevention/crime prevention equipment (5) Atomic energy-related equipment (12) Safety equipment (6) Seabed equipment (13) Other applications that are not considered general-purpose (7) Transportation control equipment applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. 20150908 / 3tf_commercial_signal_mem2012s_en.fm

(3/7) E M C C o m p o n e n t s 3-terminal Filters Product compatible with RoHS directive Halogen-free Compatible with lead-free solders For signal line Overview of MEM2012S Type FEATURES Multilayer chip EMC filter. Monolithic structure makes it highly reliable. Closed magnetic circuit structure makes it possible to achieve high-density mounting without crosstalk. Has sharp attenuation characteristics with excellent EMC suppression. Wide range of products compatible with passing frequencies and attenuating frequencies. T-type circuit is used. APPLICATION Noise removal from signal lines of data terminals, digital cameras, computers, game machines, flat TVs, etc. PART NUMBER CONSTRUCTION MEM 2012 S 25R0 T 001 L×W×T Dimensions Product internal Cutoff frequency Series name Packaging style Internal code (mm) code (MHz) 2012 2.0×1.25×0.85 S 25R0 25 T Taping 201R 200 OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT Temperature range Package quantity Individual weight Type Operating Storage temperature temperature(cid:2) （°C） （°C） (pieces/reel) （mg） MEM2012S –40 to +85 –40 to +85 4,000 8 (cid:2)(cid:3)The Storage temperature range is for after the circuit board is mounted. RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/ Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150908 / 3tf_commercial_signal_mem2012s_en.fm

(4/7) E M C C o m p o n e n t s MEM2012S Type RECOMMENDED REFLOW PROFILE Preheating Soldering Natural cooling Peak T4 e ur T3 T3 at er p m e T T2 T: t3 T1 t1 t2 t: Time Preheating Soldering Peak Temp. Time Temp. Time Temp. Time T1 T2 t1 T3 t2 T4 t3 150°C 180°C 60 to 120s 230°C 30 to 60s 250 to 260°C 10s max. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150908 / 3tf_commercial_signal_mem2012s_en.fm

(5/7) E M C C o m p o n e n t s MEM2012S Type SHAPE & DIMENSIONS 2±0.2 GND 4 min. ±0.2 0.1 1.25 1 2 3 IN/OUT GND OUT/IN 0.2min 0.2min 5 1 0. ± 5 8 0. 0.4±0.15 0.4±0.15 0.4±0.15 Dimensions in mm RECOMMENDED LAND PATTERN CIRCUIT DIAGRAM 2 1 GND 0.4 1.4 1.6 3 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150908 / 3tf_commercial_signal_mem2012s_en.fm

(6/7) E M C C o m p o n e n t s MEM2012S Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE Cutoff frequency Insertion loss Rated voltage Rated current Part No. (MHz) (dB) (V)max. (mA)max. 25 30[70MHz to 2GHz] 10 100 MEM2012S25R0T001 35 30[90MHz to 2GHz] 10 100 MEM2012S35R0T001 50 30[200MHz to 2GHz] 10 100 MEM2012S50R0T001 100 30[400MHz to 2GHz] 10 250 MEM2012S101RT001 200 30[530MHz to 2GHz] 10 250 MEM2012S201RT001 ○Measurement equipment Measurement item Product No. Manufacturer Frequency characteristics N5230C Agilent Technologies ＊ Equivalent measurement equipment may be used. INSERTION LOSS VS. FREQUENCY CHARACTERISTICS 0 10 20 )B 101R 201R d (s 30 s o n l 50R0 ertio 40 s 35R0 n I 50 25R0 60 70 1 10 100 1000 10000 Frequency (MHz) ○Measurement equipment Product No. Manufacturer N5230C Agilent Technologies ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150908 / 3tf_commercial_signal_mem2012s_en.fm

(7/7) E M C C o m p o n e n t s MEM2012S Type PACKAGING STYLE REEL DIMENSIONS 2.0±0.5 n. mi 0 6 ø 1.0 ø13±0.2 8.4+–02..00 ø21±0.8 14.4max. ø180±2.0 Dimensions in mm TAPE DIMENSIONS 1 0. 1.5+00.1 2.0±0.05 4.0±0.1 75± 1. 5 B 3.5±0.0 8.0±0.3 A 4.0±0.1 K Dimensions in mm Type A B K MEM2012S 1.55±0.20 2.30±0.20 1.10max. 160min. Taping 200min. Drawing direction 300min. Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150908 / 3tf_commercial_signal_mem2012s_en.fm

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: T DK: MEM2012S25R0T MEM2012S25R0T001 MEM2012S35R0T001 MEM2012S50R0T001 MEM2012S101RT001 MEM2012S201RT001 MEM2012S50R0T MEM2012S101RT MEM2012S201R0T MEM2012S201RT MEM2012S35R0T MEM2012S101R0T