E M C C o m p o n e n t s 3-terminal filters, SMD array Cl Pb Br Signal line MEA-L series RoHS SRVEHCA-CFrHee HaFlroegeen LFereaed MEA2010L type FEATURES Single chip for 4-line LC filters, and compatible with high-density mounting. Compact with a low profile design. Operating temperature range: –40 to +85°C APPLICATION Noise removal from signal lines of smart phones, digital cameras, PCs, game machines, flat TVs, etc. Application guides: Smart phones/tablets PART NUMBER CONSTRUCTION MEA 2010 L 50R0 T 001 L×W×T dimensions Product internal Cutoff frequency typ. Series name Packaging style Internal code 2.0×1.0×0.7 mm code (MHz) CHARACTERISTICS SPECIFICATION TABLE Cutoff frequency Insertion loss 20dB Rated voltage Rated current Part No. frequency range (MHz)typ. (MHz) (V)max. (mA)max. 50 500 to 2000 10 100 MEA2010L50R0T001 75 600 to 2000 10 100 MEA2010L75R0T001 100 800 to 2000 10 100 MEA2010L101RT001 Measurement equipment Measurement item Product No. Manufacturer Frequency characteristics N5230C Keysight Technologies ＊Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (1/4) Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190207 3tf_commercial_signal_mea2010l_en.fm

E M C C o m p o n e n t s MEA2010L type INSERTION LOSS VS. FREQUENCY CHARACTERISTICS 0 10 )B 20 d 101R (s 50R0 s n lo 30 o erti s n 40 I 50 75R0 60 1 10 100 1000 10000 Frequency (MHz) Measurement equipment Product No. Manufacturer N5230C Keysight Technologies ＊Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (2/4) Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190207 3tf_commercial_signal_mea2010l_en.fm

E M C C o m p o n e n t s MEA2010L type SHAPE & DIMENSIONS PACKAGING STYLE 2.0±0.15 min. REEL DIMENSIONS CH1 CH2 CH3 CH4 0.10 2.0±0.5 E 0.25±0.1GND GND1.0±0.15 0.5±0.1 0.5±0.1 0.5±0.1 n. mi ±0.1 ø60 0.7 0.25±0.1 0.15min. 1.0 Dimensions in mm ø13±0.2 8.4+–02..00 ø21±0.8 14.4max. RECOMMENDED LAND PATTERN ø180±2.0 2.80 Dimensions in mm 1.60 0.25 TAPE DIMENSIONS 0.60 1.80 1 05 Sprocket 0. 0. hole 1.5+–00.1 2.0±0.05 4.0±0.1 1.75± 3.5± 0.50 0.25 3 0. ± Dimensions in mm B 8.0 K A Cavity 4.0±0.1 CIRCUIT DIAGRAM Dimensions in mm CH1 CH2 CH3 CH4 Type A B K GND GND MEA2010L 1.15±0.05 2.15±0.05 0.86max. 160min. Taping 200min. RECOMMENDED REFLOW PROFILE Preheating Soldering Natural Drawing direction 300min. cooling Peak 250 to 260°C Dimensions in mm e 230°C 230°C PACKAGE QUANTITY ur at Package quantity 4,000 pcs/reel er p m e 180°C T TEMPERATURE RANGE, INDIVIDUAL WEIGHT 10s max. 150°C Operating Storage Individual temperature range temperature range weight 60 to 120s 30 to 60s –40 to +85 °C –40 to +85 °C 7 mg  The storage temperature range is for after the assembly. Time Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (3/4) Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190207 3tf_commercial_signal_mea2010l_en.fm

E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equip- ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip- ment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual- ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (8) Public information-processing equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (9) Military equipment (3) Medical equipment (10) Electric heating apparatus, burning equipment (4) Power-generation control equipment (11) Disaster prevention/crime prevention equipment (5) Atomic energy-related equipment　　 (12) Safety equipment (6) Seabed equipment (13) Other applications that are not considered general-purpose (7) Transportation control equipment applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing pro- tection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (4/4) Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190207 3tf_commercial_signal_mea2010l_en.fm