MD- / MDS-189 High Level Termination Insensitive Mixer, 1 - 3500 MHz Rev. V4 Features FP-2 (MD-189)  Operates Over Full PCN/PCS/PHS/MSS Bands  Low Conversion Loss  Fully Hermetic Package  Intermodulation Ratio Insensitive to System Mismatches  VSWR: <2.0:1 Typical Midband  Isolation: 35 dB Typical Midband  High IIP (+28 dBm Typical 1-3500 MHz) 3 Description M/A-COM’s MD-189 and MDS-189 are high level termination insensitive mixers. These devices are packaged in 8-lead flatpack and SMT packages. These mixers offer consistent and repeatable flat intermodulation performance and flat conversion loss with low spurious signal generation independent of system mismatch from 1 to 3500 MHz. The MD -189 and MDS-189 are ideally suited for RF/IF com- munications applications requiring high intercept point performance. SF-1 (MDS-189) Pin Configuration (MD-189) Pin No. Function Pin No. Function 1 GND 5 LO 2 GND 6 GND 3 GND 7 GND 4 IF 8 RF Pin Configuration (MDS-189) Pin No. Function Pin No. Function 1 GND 3 LO 2 IF 4 RF Absolute Maximum Ratings 1 Parameter Absolute Maximum Max Input Power2 0.5W Derated to 85oC Total Power @ 3.2 mW/oC LO Power +27 dBm 1. Operation of this device above any one of these parameters nay cause permanent damage. 2. Ambient Temperature (T ) = +25oC 1 A M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support

MD- / MDS-189 High Level Termination Insensitive Mixer, 1 - 3500 MHz Rev. V4 Electrical Specifications1: T = -55°C to +85°C A Frequency: RF, LO Ports = 1-3500 MHz, IF Port = 5-1500 MHz Parameter Test Conditions Frequency Units Min Typ Max Conversion Loss LO @ 23 dBm 5 - 1000 MHz dB — 6.5 7.0 IF @ 60 MHz 1000 - 3000 MHz dB — 7.5 8.5 1 - 3500 MHz dB — 8.0 9.5 Isolation LO to RF 1 - 2000 MHz dB 30 35 — 2000 - 3500 MHz dB 25 30 — LO to IF 1 - 2000 MHz dB 25 30 — 2000 - 3500 MHz dB 20 25 — RF to IF 10 - 500 MHz dB 30 35 — 1 - 3500 MHz dB 15 20 — Input Compression LO @ 23 dBm — — — +20 — (1 dB) IF @ 60 MHz IIP LO @ 23 dBm — dBm — +28 — 3 IF @ 60 MHz Desensitivity (1dB) LO @ 23 dBm — dBm — +17 — IF @ 60 MHz — dBm — — SSB Noise Figure LO @ 23 dBm — — — — — IF @ 60 MHz Within 1 dB of Conversion Loss Max Bottom View of SF-1 Typical Performance Curves 4X .016 . 5±0 .6002 6X .050 (+.020/-.000) 4X .099 ± .010 .385 Ref .220 .381 .165 .002 .000 .000.002 .080 .143 .205 .305 .367 .430 .510 Ref 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support

MD- / MDS-189 High Level Termination Insensitive Mixer, 1 - 3500 MHz Rev. V4 Typical Performance Curves Ordering Information Part Number Package MD-189 PIN FP-2 MDS-189 PIN SF-1 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support

MD- / MDS-189 High Level Termination Insensitive Mixer, 1 - 3500 MHz Rev. V4 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: M ACOM: MDS-189-PIN MD-189-PIN