MCP9700/9700A MCP9701/9701A Low-Power Linear Active Thermistor ICs Features General Description • Tiny Analog Temperature Sensor MCP9700/9700A and MCP9701/9701A sensors with • Available Packages: Linear Active Thermistor Integrated Circuit (IC) com- prise a family of analog temperature sensors that - SC70-5, SOT-23-3, TO-92-3 convert temperature to analog voltage. • Wide Temperature Measurement Range: The low-cost, low-power sensors feature an accuracy - -40°C to +125°C (Extended Temperature) of ±2°C from 0°C to +70°C (MCP9700A/9701A) and - -40°C to +150°C (High Temperature) ±4°C from 0°C to +70°C (MCP9700/9701) while (MCP9700, SOT-23-3 and SC70-5 only) consuming 6µA (typical) of operating current. • Accuracy: Unlike resistive sensors, e.g., thermistors, the Linear - ±2°C (max.), 0°C to +70°C (MCP9700A/9701A) Active Thermistor IC does not require an additional - ±4°C (max.), 0°C to +70°C (MCP9700/9701) signal-conditioning circuit. Therefore, the biasing circuit • Optimized for Analog-to-Digital Converters (ADCs): development overhead for thermistor solutions can be - 10.0mV/°C (typical) (MCP9700/9700A) avoided by implementing a sensor from these low-cost - 19.5mV/°C (typical) (MCP9701/9701A) devices. The Voltage Output pin (VOUT) can be directly connected to the ADC input of a microcontroller. The • Wide Operating Voltage Range: MCP9700/9700A and MCP9701/9701A temperature - V = 2.3V to 5.5V (MCP9700/9700A) DD coefficients are scaled to provide a 1°C/bit resolution - VDD = 3.1V to 5.5V (MCP9701/9701A) for an 8-bit ADC with a reference voltage of 2.5V and • Low Operating Current: 6µA (typical) 5V, respectively. The MCP9700/9700A output 0.1°C/bit • Optimized to Drive Large Capacitive Loads for a 12-bit ADC with 4.096V reference. The MCP9700/9700A and MCP9701/9701A provide a Typical Applications low-cost solution for applications that require measure- ment of a relative change of temperature. When mea- • Hard Disk Drives and Other PC Peripherals suring relative change in temperature from +25°C, an • Entertainment Systems accuracy of ±1°C (typical) can be realized from 0°C to • Home Appliance +70°C. This accuracy can also be achieved by applying • Office Equipment system calibration at +25°C. • Battery Packs and Portable Equipment In addition, this family of devices is immune to the • General Purpose Temperature Monitoring effects of parasitic capacitance and can drive large capacitive loads. This provides printed circuit board (PCB) layout design flexibility by enabling the device to be remotely located from the microcontroller. Adding some capacitance at the output also helps the output transient response by reducing overshoots or undershoots. However, capacitive load is not required for the stability of sensor output. Package Types 3-Pin TO-92 3-Pin SOT-23 5-Pin SC70 MCP9700/9700A MCP9700/9700A MCP9700/9700A MCP9701/9701A MCP9701/9701A MCP9701/9701A GND NC 1 5 NC 1 23 3 GND 2 V 3 4 V Bottom OUT DD View 1 2 1 VDD VOUTGND VDD VOUT  2005-2016 Microchip Technology Inc. DS20001942G-page 1

MCP9700/9700A and MCP9701/9701A 1.0 ELECTRICAL † Notice: Stresses above those listed under “Maximum Ratings” may cause permanent damage to the device. This is CHARACTERISTICS a stress rating only and functional operation of the device at those or any other conditions above those indicated in the Absolute Maximum Ratings † operational listings of this specification is not implied. Exposure to maximum rating conditions for extended periods VDD....................................................................... 6.0V may affect device reliability. Storage Temperature......................... -65°C to +150°C Ambient Temp. with Power Applied... -40°C to +150°C Output Current.................................................±30mA Junction Temperature (T )..................................150°C J ESD Protection on All Pins (HBM:MM).....(4kV:200V) Latch-Up Current at Each Pin....................... ±200mA DC ELECTRICAL CHARACTERISTICS Electrical Specifications: Unless otherwise indicated: MCP9700/9700A: V = 2.3V to 5.5V, GND = Ground, T = -40°C to +125°C and No load DD A MCP9701/9701A: V = 3.1V to 5.5V, GND = Ground, T = -10°C to +125°C and No load DD A Parameter Sym. Min. Typ. Max. Unit Conditions Power Supply Operating Voltage Range V 2.3 — 5.5 V MCP9700/9700A DD V 3.1 — 5.5 V MCP9701/9701A DD Operating Current I — 6 12 µA DD I — — 15 µA T = 150°C (Note1) DD A Line Regulation °C/V — 0.1 — °C/V DD Sensor Accuracy (Notes2,3) T = +25°C T — ±1 — °C A ACY T = 0°C to +70°C T -2.0 ±1 +2.0 °C MCP9700A/9701A A ACY T = -40°C to +125°C T -2.0 ±1 +4.0 °C MCP9700A A ACY T = -10°C to +125°C T -2.0 ±1 +4.0 °C MCP9701A A ACY T = 0°C to +70°C T -4.0 ±2 +4.0 °C MCP9700/9701 A ACY T = -40°C to +125°C T -4.0 ±2 +6.0 °C MCP9700 A ACY T = -10°C to +125°C T -4.0 ±2 +6.0 °C MCP9701 A ACY T = -40°C to +150°C T -4.0 ±2 +6.0 °C HighTemperature (Note1) A ACY Sensor Output Output Voltage, T = 0°C V — 500 — mV MCP9700/9700A A 0°C Output Voltage, T = 0°C V — 400 — mV MCP9701/9701A A 0°C Temperature Coefficient T — 10.0 — mV/°C MCP9700/9700A C T — 19.5 — mV/°C MCP9701/9701A C Output Nonlinearity V — ±0.5 — °C T = 0°C to +70°C (Note3) ONL A Note 1: MCP9700 with SC70-5 and SOT-23-3 packages only. The MCP9700 High Temperature is not available with TO-92 package. 2: The MCP9700/9700A family accuracy is tested with V = 3.3V, while the MCP9701/9701A accuracy is DD tested with V = 5.0V. DD 3: The MCP9700/9700A and MCP9701/9701A family is characterized using the first-order or linear equation, as shown in Equation4-2. Also refer to Figure2-16. 4: The MCP9700/9700A and MCP9701/9701A family is characterized and production tested with a capacitive load of 1000pF. 5: SC70-5 package thermal response with 1x1 inch, dual-sided copper clad, TO-92-3 package thermal response without PCB (leaded). DS20001942G-page 2  2005-2016 Microchip Technology Inc.

MCP9700/9700A and MCP9701/9701A DC ELECTRICAL CHARACTERISTICS (CONTINUED) Electrical Specifications: Unless otherwise indicated: MCP9700/9700A: V = 2.3V to 5.5V, GND = Ground, T = -40°C to +125°C and No load DD A MCP9701/9701A: V = 3.1V to 5.5V, GND = Ground, T = -10°C to +125°C and No load DD A Parameter Sym. Min. Typ. Max. Unit Conditions Output Current I — — 100 µA OUT Output Impedance Z — 20 —  I = 100µA, f = 500Hz OUT OUT Output Load Regulation V / — 1 —  T = 0°C to +70°C OUT A I I = 100µA OUT OUT Turn-On Time t — 800 — µs ON Typical Load Capacitance C — — 1000 pF Note4 LOAD SC-70 Thermal Response to 63% t — 1.3 — s 30°C (Air) to +125°C RES (Fluid Bath) (Note5) TO-92 Thermal Response to 63% t — 1.65 — s RES Note 1: MCP9700 with SC70-5 and SOT-23-3 packages only. The MCP9700 High Temperature is not available with TO-92 package. 2: The MCP9700/9700A family accuracy is tested with V = 3.3V, while the MCP9701/9701A accuracy is DD tested with V = 5.0V. DD 3: The MCP9700/9700A and MCP9701/9701A family is characterized using the first-order or linear equation, as shown in Equation4-2. Also refer to Figure2-16. 4: The MCP9700/9700A and MCP9701/9701A family is characterized and production tested with a capacitive load of 1000pF. 5: SC70-5 package thermal response with 1x1 inch, dual-sided copper clad, TO-92-3 package thermal response without PCB (leaded). TEMPERATURE CHARACTERISTICS Electrical Specifications: Unless otherwise indicated: MCP9700/9700A: V = 2.3V to 5.5V, GND = Ground, T = -40°C to +125°C and No load DD A MCP9701/9701A: V = 3.1V to 5.5V, GND = Ground, T = -10°C to +125°C and No load DD A Parameters Sym. Min. Typ. Max. Units Conditions Temperature Ranges Specified Temperature Range (Note1) T -40 — +125 °C MCP9700/9700A A T -10 — +125 °C MCP9701/9701A A T -40 — +150 °C High Temperature A (MCP9700, SOT23-3 and SC70-5 only) Operating Temperature Range T -40 — +125 °C Extended Temperature A T -40 — +150 °C High Temperature A Storage Temperature Range T -65 — +150 °C A Thermal Package Resistances Thermal Resistance, 5LD SC70  — 331 — °C/W JA Thermal Resistance, 3LD SOT-23  — 308 — °C/W JA Thermal Resistance, 3LD TO-92  — 146 — °C/W JA Note 1: Operation in this range must not cause T to exceed Maximum Junction Temperature (+150°C). J  2005-2016 Microchip Technology Inc. DS20001942G-page 3

MCP9700/9700A and MCP9701/9701A 2.0 TYPICAL PERFORMANCE CURVES Note: The graphs and tables provided following this note are a statistical summary based on a limited number of samples and are provided for informational purposes only. The performance characteristics listed herein are not tested or guaranteed. In some graphs or tables, the data presented may be outside the specified operating range (e.g., outside specified power supply range) and therefore outside the warranted range. Note: Unless otherwise indicated, MCP9700/9700A: V = 2.3V to 5.5V; MCP9701/9701A: V = 3.1V to 5.5V; DD DD GND = Ground, C = 0.1µF. bypass 6.0 6.0 5.0 4.0 4.0 MCP9701 C) MCP9701A C) V = 5.0V Spec. Limits y (° 3.0 VDD= 5.0V y (° 2.0 DD ac 2.0 Spec. Limits ac cur 1.0 cur 0.0 c c A 0.0 A -2.0 -1.0 MCP9700 MCP9700A VDD= 3.3V VDD= 3.3V -2.0 -4.0 -50 -25 0 25 50 75 100 125 150 -50 -25 0 25 50 75 100 125 150 T (°C) T (°C) A A FIGURE 2-1: Accuracy vs. Ambient FIGURE 2-4: Accuracy vs. Ambient Temperature (MCP9700A/9701A). Temperature (MCP9700/9701). 6.0 C) 4.0 MMVVDDCCDDPP==99 5277..005300VVA MMVVDDCCDDPP==99 5377..005111VVA/ o Load 00..12 ILOAD = 100 µA MCP9701/MVCDDP 9=7 50.10AV y (° 2.0 ue t Accurac 0.0 uracy D(°C)-0.10 MCP9700/ M VCDDP 9=7 30.03AV -2.0 cc A ∆ -4.0 -0.2 -50 -25 0 25 50 75 100 125 150 -50 -25 0 25 50 75 100 125 150 TA(°C) TA (°C) FIGURE 2-2: Accuracy vs. Ambient FIGURE 2-5: Changes in Accuracy vs. Temperature, with V . Ambient Temperature (Due to Load). DD 12.0 4.0 Ω) MCP9700/MCP9700A 10.0 MCP9701 ∆I ( 3.0 MVDCDP =9 370.31V/MCP9701A 8.0 MCP9701A ∆V/ IOUT = 50 µA (µA)D 6.0 ation 2.0 IIOOUUTT == 120000 µµAA ID 4.0 MCP9700/MCP9700A gul Re 1.0 2.0 d a o 0.0 L 0.0 -50 -25 0 25 50 75 100 125 150 -50 -25 0 25 50 75 100 125 T (°C) T (°C) A A FIGURE 2-3: Supply Current vs. FIGURE 2-6: Load Regulation vs. Temperature. Ambient Temperature. DS20001942G-page 4  2005-2016 Microchip Technology Inc.

MCP9700/9700A and MCP9701/9701A Note: Unless otherwise indicated, MCP9700/9700A: V = 2.3V to 5.5V; MCP9701/9701A: V = 3.1V to 5.5V; DD DD GND = Ground, C = 0.1µF. bypass 35% 35% 30% V10D8D =sa 3m.3pVles MCP9700A 30% MVDCDP =9 75.001V 108 samples s 25% s 25% e e c c n 20% n 20% urre 15% urre 15% MCP9701A c c c c O 10% MCP9700 O 10% MCP9701 5% 5% 0% 0% 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 4 6 8 0 2 4 6 8 0 0 2 4 6 8 0 2 4 6 8 0 4 4 4 4 4 5 5 5 5 5 6 3 3 3 3 3 4 4 4 4 4 5 V (mV) V (mV) 0°C 0°C FIGURE 2-7: Output Voltage at 0°C FIGURE 2-10: Output Voltage at 0°C (MCP9700/9700A). (MCP9701/9701A). 45% 45% 40% MCP9700 40% MCP9701 MCP9700A MCP9701A 35% 35% ences 2350%% V10D8D =s a3m.3pVles ences 2350%% V10D8D =sa 5m.0pVles urr 20% urr 20% cc 15% cc 15% O O 10% 10% 5% 5% 0% 0% 9.7 9.8 9.8 9.9 10.0 10.1 10.2 10.2 10.3 10.4 10.5 19.2 19.3 19.3 19.4 19.5 19.6 19.7 19.7 19.8 19.9 20.0 T (mV/°C) T (mV/°C) C C FIGURE 2-8: Occurrences vs. FIGURE 2-11: Occurrences vs. Temperature Coefficient (MCP9700/9700A). Temperature Coefficient (MCP9701/9701A). 0.30 0.30 malized Line Regulation (°C/V)(cid:507)(cid:507)DD00000.....0112250505 MMVVCCDDPDPD 9= 9=7 7 2020.0.303/V/MVM tCtCooPP 4959.7.0750V0V00AA malized Line Regulation (°C/V)(cid:507)(cid:507)DD00000.....0112250505 MMVCVCDDPDPD 9= 9=7 73 030.11.11/VM/VM tC tCooP P5 949.75.700V0V11AA Nor Nor 0.00 0.00 -50 -25 0 25 50 75 100 125 150 -50 -25 0 25 50 75 100 125 T (°C) T (°C) A A FIGURE 2-9: Line Regulation (°C/V ) FIGURE 2-12: Line Regulation (°C/V ) DD DD vs. Ambient Temperature. vs. Ambient Temperature.  2005-2016 Microchip Technology Inc. DS20001942G-page 5

MCP9700/9700A and MCP9701/9701A Note: Unless otherwise indicated, MCP9700/9700A: V = 2.3V to 5.5V; MCP9701/9701A: V = 3.1V to 5.5V; DD DD GND = Ground, C = 0.1µF. bypass 1.6 3.0 1.4 TA = +26°C 2.5 1.2 MCP9701 2.0 MCP9701A V) 1.0 V) V (OUT 00..68 V (OUT 11..05 MCP9700 0.4 MCP9700A 0.5 0.2 0.0 0.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 -50 -25 0 25 50 75 100 125 VDD (V) TA (°C) FIGURE 2-13: Output Voltage vs. Power FIGURE 2-16: Output Voltage vs. Ambient Supply. Temperature. 12 2.5 3.0 30.0 108 IDD VDD_TSAT E=P 2=6 5°CV 01..87 I (mA)DD 22..05 IDD VDD_RAMTPA == 5+V2/6m°Cs 61.80.0 I (µA)DD 6 0.0 1.5 -6.0 V (V)OUT 24 VOUT --10..78 V (V)OUT 01..50 VOUT --3108..00 0 -2.5 0.0 -42.0 1 0 1 2 3 4 5 6 7 8 9 0 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 1. 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 - Time (ms) Time (ms) FIGURE 2-14: Output vs. Settling Time to FIGURE 2-17: Output vs. Settling Time to Step V . Ramp V . DD DD 130 1000 VDD = 5.0V 105 1 in. x 1 in. Copper ClaSdC P70C-B5 e (Ω) ITOAU T= =+ 21060°C µA nc 100 C) da T (°A80 Leaded, without PCB mpe 55 SC70-5 ut I 10 SOT-23-3 p TO-92-3 ut O 30 1 -2 0 2 4 6 8 10 12 14 16 18 0. 1 10 100 1k 10k 100k 0.1 1 10 100 1000 10000 100000 Time (s) Frequency (Hz) FIGURE 2-15: Thermal Response FIGURE 2-18: Output Impedance vs. (Air-to-Fluid Bath). Frequency. DS20001942G-page 6  2005-2016 Microchip Technology Inc.

MCP9700/9700A and MCP9701/9701A 3.0 PIN DESCRIPTIONS The descriptions of the pins are listed in Table3-1. TABLE 3-1: PIN FUNCTION TABLE Pin No. Pin No. Pin No. Symbol Function SC70 SOT-23 TO-92 1 — — NC No Connect (this pin is not connected to the die.) 2 3 3 GND Power Ground Pin 3 2 2 V Output Voltage Pin OUT 4 1 1 V Power Supply Input DD 5 — — NC No Connect (this pin is not connected to the die.) 3.1 Power Ground Pin (GND) 3.3 Power Supply Input (V ) DD GND is the system ground pin. The operating voltage as specified in the DC Electrical Characteristics table is applied to V . DD 3.2 Output Voltage Pin (V ) OUT 3.4 No Connect Pin (NC) The sensor output can be measured at V . The OUT voltage range over the operating temperature range for This pin is not connected to the die. It can be used to the MCP9700/9700A is 100mV to 1.75V. The voltage improve thermal conduction to the package by range over the operating temperature range for the connecting it to a printed circuit board (PCB) trace from MCP9701/9701A is 200mV to 3V. the thermal source.  2005-2016 Microchip Technology Inc. DS20001942G-page 7

MCP9700/9700A and MCP9701/9701A 4.0 APPLICATIONS INFORMATION The Linear Active Thermistor™ IC uses an internal 3.0 diode to measure temperature. The diode electrical 2.0 characteristics have a temperature coefficient that parmobviidenets team cphearantguer ei nfr ovmo l-ta4g0e°C b taos 1e5d0 °oCn. Tthhee crehlaantigvee cy (°C) 01..00 a in voltage is scaled to a temperature coefficient of ur 10.0mV/°C (typical) for the MCP9700/9700A and Acc -1.0 19.5mV/°C (typical) for the MCP9701/9701A. The -2.0 VDD= 3.3V 10 Samples output voltage at 0°C is also scaled to 500mV (typical) -3.0 and 400mV (typical) for the MCP9700/9700A and -50 -25 0 25 50 75 100 125 MCP9701/9701A, respectively. This linear scale is T (°C) A described in the first-order transfer function shown in Equation4-1 and Figure2-16. FIGURE 4-2: Relative Accuracy to +25°C vs. Temperature. EQUATION 4-1: SENSOR TRANSFER The change in accuracy from the calibration tempera- FUNCTION ture is due to the output nonlinearity from the first-order equation, as specified in Equation4-2. The accuracy V = T  T +V OUT C A 0°C can be further improved by compensating for the output nonlinearity. Where: T = Ambient Temperature For higher accuracy using a sensor compensation A technique, refer to Application Note AN1001, V = Sensor Output Voltage OUT “ICTemperature Sensor Accuracy Compensation with V0°C = Sensor Output Voltage at 0°C a PIC® Microcontroller” (DS00001001). The application (see DC Electrical Characteristics note shows that if the device is compensated in table) addition to room temperature calibration, the sensor T = Temperature Coefficient accuracy can be improved to ±0.5°C (typical) accuracy C (see DC Electrical Characteristics over the operating temperature (Figure4-3). table) 6.0 100 Samples V V DD DD 4.0 C) y (° 2.0 Spec. Limits MCP9700 VOUT ANI PIC® urac 0.0 MCU cc A GND -2.0 + s Average - s -4.0 GND GND -50 -25 0 25 50 75 100 125 Temperature (°C) FIGURE 4-1: Typical Application Circuit. FIGURE 4-3: MCP9700/9700A Calibrated Sensor Accuracy. 4.1 Improving Accuracy The compensation technique provides a linear The MCP9700/9700A and MCP9701/9701A accuracy temperature reading. The application note includes can be improved by performing a system calibration at compensation firmware so that a look-up table can be a specific temperature. For example, calibrating the generated to compensate for the sensor error. system at +25°C ambient improves the measurement accuracy to a ±0.5°C (typical) from 0°C to +70°C, as shown in Figure4-2. Therefore, when measuring relative temperature change, this family of devices measures temperature with higher accuracy. DS20001942G-page 8  2005-2016 Microchip Technology Inc.

MCP9700/9700A and MCP9701/9701A 4.2 Shutdown Using Microcontroller 4.4 Thermal Considerations I/O Pin The MCP9700/9700A and MCP9701/9701A family The 6µA (typical) low operating current of the measures temperature by monitoring the voltage of a MCP9700/9700A and MCP9701/9701A family makes it diode located in the die. A low-impedance thermal path ideal for battery-powered applications. However, for between the die and the PCB is provided by the pins. applications that require a tighter current budget, this Therefore, the sensor effectively monitors the device can be powered using a microcontroller temperature of the PCB. However, the thermal path for Input/Output (I/O) pin. The I/O pin can be toggled to the ambient air is not as efficient because the plastic shut down the device. In such applications, the micro- device package functions as a thermal insulator from controller internal digital switching noise is emitted to the die. This limitation applies to plastic-packaged the MCP9700/9700A and MCP9701/9701A as power silicon temperature sensors. If the application requires supply noise. However, this switching noise compro- the measurement of ambient air, the TO-92 package mises measurement accuracy, therefore a decoupling should be considered. capacitor and series resistor will be necessary to filter The MCP9700/9700A and MCP9701/9701A sensors out the system noise. are designed to source/sink 100µA (max.). The power dissipation due to the output current is relatively 4.3 Layout Considerations insignificant. The effect of the output current can be described by Equation4-2. The MCP9700/9700A and MCP9701/9701A family of sensors does not require any additional components to EQUATION 4-2: EFFECT OF operate. However, it is recommended that a decoupling SELF-HEATING capacitor of 0.1µF to 1µF be used between the V andGND pins. In high-noise applications, connect T –T =  V I +V –V I  DD J A JA DD DD DD OUT OUT the power supply voltage to the V pin using a DD Where: 200resistor with a 1µF decoupling capacitor. A high frequency ceramic capacitor is recommended. It is nec- TJ = Junction Temperature essary that the capacitor is located as close as possible T = Ambient Temperature A to the V and GND pins in order to provide effective DD  = Package Thermal Resistance (331°C/W) JA noise protection. In addition, avoid tracing digital lines V = Sensor Output Voltage in close proximity to the sensor. OUT I = Sensor Output Current OUT I = Operating Current DD V = Operating Voltage DD At T =+25°C (V =0.75V) and maximum A OUT specification of I =12µA, V =5.5V and DD DD I =+100µA, the self-heating due to power OUT dissipation (T –T ) is 0.179°C. J A  2005-2016 Microchip Technology Inc. DS20001942G-page 9

MCP9700/9700A and MCP9701/9701A 5.0 PACKAGING INFORMATION 5.1 Package Marking Information 5-Lead SC70 Example Device Code MCP9700T-E/LT AUNN MCP9700AT-E/LT AXNN XXNN BC25 MCP9700T-H/LT BCNN MCP9701T-E/LT AVNN MCP9701AT-E/LT AYNN Note: Applies to 5-Lead SC70. 3-Lead SOT-23 Example Device Code XXNN MCP9700T-E/TT AENN MCP9700AT-E/TT AFNN AE25 MCP9700T-H/TT AGNN MCP9701T-E/TT AMNN MCP9701AT-E/TT APNN Note: Applies to 3-Lead SOT-23. 3-Lead TO-92 Example XXXXXX Device MCP XXXXXX MCP9700-E/TO 9700E XXXXXX MCP9700A-E/TO TOe3 YWWNNN MCP9701-E/TO 614256 MCP9701A-E/TO Note: Applies to 3-Lead TO-92. Legend: XX...X Customer-specific information Y Year code (last digit of calendar year) YY Year code (last 2 digits of calendar year) WW Week code (week of January 1 is week ‘01’) NNN Alphanumeric traceability code e3 Pb-free JEDEC® designator for Matte Tin (Sn) * This package is Pb-free. The Pb-free JEDEC designator ( e 3 ) can be found on the outer packaging for this package. Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-specific information. DS20001942G-page 10  2005-2016 Microchip Technology Inc.

MCP9700/9700A and MCP9701/9701A (cid:2)(cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:6)(cid:11)(cid:12)(cid:13)(cid:14)(cid:8)(cid:15)(cid:16)(cid:6)(cid:10)(cid:10)(cid:8)(cid:17)(cid:18)(cid:12)(cid:10)(cid:13)(cid:19)(cid:5)(cid:8)(cid:20)(cid:21)(cid:6)(cid:19)(cid:11)(cid:13)(cid:11)(cid:12)(cid:22)(cid:21)(cid:8)(cid:23)(cid:4)(cid:20)(cid:24)(cid:8)(cid:25)(cid:15)(cid:26)(cid:27)(cid:28)(cid:29) (cid:30)(cid:22)(cid:12)(cid:5)(cid:31) .(cid:10)(cid:9)(cid:2)#(cid:11)(cid:14)(cid:2)(cid:31)(cid:10) #(cid:2)(cid:8)$(cid:9)(cid:9)(cid:14)(cid:15)#(cid:2)(cid:12)(cid:28)(cid:8)/(cid:28)(cid:17)(cid:14)(cid:2)!(cid:9)(cid:28)-(cid:7)(cid:15)(cid:17) 0(cid:2)(cid:12)(cid:16)(cid:14)(cid:28) (cid:14)(cid:2) (cid:14)(cid:14)(cid:2)#(cid:11)(cid:14)(cid:2)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:2)1(cid:28)(cid:8)/(cid:28)(cid:17)(cid:7)(cid:15)(cid:17)(cid:2)(cid:22)(cid:12)(cid:14)(cid:8)(cid:7)%(cid:7)(cid:8)(cid:28)#(cid:7)(cid:10)(cid:15)(cid:2)(cid:16)(cid:10)(cid:8)(cid:28)#(cid:14)!(cid:2)(cid:28)#(cid:2) (cid:11)##(cid:12)+22---(cid:20)(cid:31)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:20)(cid:8)(cid:10)(cid:31)2(cid:12)(cid:28)(cid:8)/(cid:28)(cid:17)(cid:7)(cid:15)(cid:17) D b 3 2 1 E1 E 4 5 e e A A2 c A1 L 3(cid:15)(cid:7)# (cid:6)(cid:19)44(cid:19)(cid:6)"(cid:13)"(cid:26)(cid:22) (cid:21)(cid:7)(cid:31)(cid:14)(cid:15) (cid:7)(cid:10)(cid:15)(cid:2)4(cid:7)(cid:31)(cid:7)# (cid:6)(cid:19)5 56(cid:6) (cid:6)(cid:25)7 5$(cid:31)8(cid:14)(cid:9)(cid:2)(cid:10)%(cid:2)1(cid:7)(cid:15) 5 ( 1(cid:7)#(cid:8)(cid:11) (cid:14) (cid:4)(cid:20)9((cid:2))(cid:22)* 6,(cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2):(cid:14)(cid:7)(cid:17)(cid:11)# (cid:25) (cid:4)(cid:20);(cid:4) < (cid:30)(cid:20)(cid:30)(cid:4) (cid:6)(cid:10)(cid:16)!(cid:14)!(cid:2)1(cid:28)(cid:8)/(cid:28)(cid:17)(cid:14)(cid:2)(cid:13)(cid:11)(cid:7)(cid:8)/(cid:15)(cid:14) (cid:25)(cid:3) (cid:4)(cid:20);(cid:4) < (cid:30)(cid:20)(cid:4)(cid:4) (cid:22)#(cid:28)(cid:15)!(cid:10)%% (cid:25)(cid:30) (cid:4)(cid:20)(cid:4)(cid:4) < (cid:4)(cid:20)(cid:30)(cid:4) 6,(cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2)=(cid:7)!#(cid:11) " (cid:30)(cid:20);(cid:4) (cid:3)(cid:20)(cid:30)(cid:4) (cid:3)(cid:20)(cid:23)(cid:4) (cid:6)(cid:10)(cid:16)!(cid:14)!(cid:2)1(cid:28)(cid:8)/(cid:28)(cid:17)(cid:14)(cid:2)=(cid:7)!#(cid:11) "(cid:30) (cid:30)(cid:20)(cid:30)( (cid:30)(cid:20)(cid:3)( (cid:30)(cid:20)(cid:29)( 6,(cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2)4(cid:14)(cid:15)(cid:17)#(cid:11) (cid:21) (cid:30)(cid:20);(cid:4) (cid:3)(cid:20)(cid:4)(cid:4) (cid:3)(cid:20)(cid:3)( .(cid:10)(cid:10)#(cid:2)4(cid:14)(cid:15)(cid:17)#(cid:11) 4 (cid:4)(cid:20)(cid:30)(cid:4) (cid:4)(cid:20)(cid:3)(cid:4) (cid:4)(cid:20)(cid:23)9 4(cid:14)(cid:28)!(cid:2)(cid:13)(cid:11)(cid:7)(cid:8)/(cid:15)(cid:14) (cid:8) (cid:4)(cid:20)(cid:4); < (cid:4)(cid:20)(cid:3)9 4(cid:14)(cid:28)!(cid:2)=(cid:7)!#(cid:11) 8 (cid:4)(cid:20)(cid:30)( < (cid:4)(cid:20)(cid:23)(cid:4) (cid:30)(cid:22)(cid:12)(cid:5)(cid:11)(cid:31) (cid:30)(cid:20) (cid:21)(cid:7)(cid:31)(cid:14)(cid:15) (cid:7)(cid:10)(cid:15) (cid:2)(cid:21)(cid:2)(cid:28)(cid:15)!(cid:2)"(cid:30)(cid:2)!(cid:10)(cid:2)(cid:15)(cid:10)#(cid:2)(cid:7)(cid:15)(cid:8)(cid:16)$!(cid:14)(cid:2)(cid:31)(cid:10)(cid:16)!(cid:2)%(cid:16)(cid:28) (cid:11)(cid:2)(cid:10)(cid:9)(cid:2)(cid:12)(cid:9)(cid:10)#(cid:9)$ (cid:7)(cid:10)(cid:15) (cid:20)(cid:2)(cid:6)(cid:10)(cid:16)!(cid:2)%(cid:16)(cid:28) (cid:11)(cid:2)(cid:10)(cid:9)(cid:2)(cid:12)(cid:9)(cid:10)#(cid:9)$ (cid:7)(cid:10)(cid:15) (cid:2) (cid:11)(cid:28)(cid:16)(cid:16)(cid:2)(cid:15)(cid:10)#(cid:2)(cid:14)&(cid:8)(cid:14)(cid:14)!(cid:2)(cid:4)(cid:20)(cid:30)(cid:3)(cid:5)(cid:2)(cid:31)(cid:31)(cid:2)(cid:12)(cid:14)(cid:9)(cid:2) (cid:7)!(cid:14)(cid:20) (cid:3)(cid:20) (cid:21)(cid:7)(cid:31)(cid:14)(cid:15) (cid:7)(cid:10)(cid:15)(cid:7)(cid:15)(cid:17)(cid:2)(cid:28)(cid:15)!(cid:2)#(cid:10)(cid:16)(cid:14)(cid:9)(cid:28)(cid:15)(cid:8)(cid:7)(cid:15)(cid:17)(cid:2)(cid:12)(cid:14)(cid:9)(cid:2)(cid:25)(cid:22)(cid:6)"(cid:2)’(cid:30)(cid:23)(cid:20)((cid:6)(cid:20) )(cid:22)*+ )(cid:28) (cid:7)(cid:8)(cid:2)(cid:21)(cid:7)(cid:31)(cid:14)(cid:15) (cid:7)(cid:10)(cid:15)(cid:20)(cid:2)(cid:13)(cid:11)(cid:14)(cid:10)(cid:9)(cid:14)#(cid:7)(cid:8)(cid:28)(cid:16)(cid:16)(cid:18)(cid:2)(cid:14)&(cid:28)(cid:8)#(cid:2),(cid:28)(cid:16)$(cid:14)(cid:2) (cid:11)(cid:10)-(cid:15)(cid:2)-(cid:7)#(cid:11)(cid:10)$#(cid:2)#(cid:10)(cid:16)(cid:14)(cid:9)(cid:28)(cid:15)(cid:8)(cid:14) (cid:20) (cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:13)(cid:14)(cid:8)(cid:11)(cid:15)(cid:10)(cid:16)(cid:10)(cid:17)(cid:18)(cid:21)(cid:9)(cid:28)-(cid:7)(cid:15)(cid:17)*(cid:4)(cid:23)(cid:27)(cid:4)9(cid:30))  2005-2016 Microchip Technology Inc. DS20001942G-page 11

MCP9700/9700A and MCP9701/9701A (cid:30)(cid:22)(cid:12)(cid:5)(cid:31) .(cid:10)(cid:9)(cid:2)#(cid:11)(cid:14)(cid:2)(cid:31)(cid:10) #(cid:2)(cid:8)$(cid:9)(cid:9)(cid:14)(cid:15)#(cid:2)(cid:12)(cid:28)(cid:8)/(cid:28)(cid:17)(cid:14)(cid:2)!(cid:9)(cid:28)-(cid:7)(cid:15)(cid:17) 0(cid:2)(cid:12)(cid:16)(cid:14)(cid:28) (cid:14)(cid:2) (cid:14)(cid:14)(cid:2)#(cid:11)(cid:14)(cid:2)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:2)1(cid:28)(cid:8)/(cid:28)(cid:17)(cid:7)(cid:15)(cid:17)(cid:2)(cid:22)(cid:12)(cid:14)(cid:8)(cid:7)%(cid:7)(cid:8)(cid:28)#(cid:7)(cid:10)(cid:15)(cid:2)(cid:16)(cid:10)(cid:8)(cid:28)#(cid:14)!(cid:2)(cid:28)#(cid:2) (cid:11)##(cid:12)+22---(cid:20)(cid:31)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:20)(cid:8)(cid:10)(cid:31)2(cid:12)(cid:28)(cid:8)/(cid:28)(cid:17)(cid:7)(cid:15)(cid:17) DS20001942G-page 12  2005-2016 Microchip Technology Inc.

MCP9700/9700A and MCP9701/9701A !(cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:6)(cid:11)(cid:12)(cid:13)(cid:14)(cid:8)(cid:15)(cid:16)(cid:6)(cid:10)(cid:10)(cid:8)(cid:17)(cid:18)(cid:12)(cid:10)(cid:13)(cid:19)(cid:5)(cid:8)(cid:20)(cid:21)(cid:6)(cid:19)(cid:11)(cid:13)(cid:11)(cid:12)(cid:22)(cid:21)(cid:8)(cid:23)(cid:20)(cid:20)(cid:24)(cid:8)(cid:25)(cid:15)(cid:17)(cid:20)(cid:3)"!(cid:29) (cid:30)(cid:22)(cid:12)(cid:5)(cid:31) .(cid:10)(cid:9)(cid:2)#(cid:11)(cid:14)(cid:2)(cid:31)(cid:10) #(cid:2)(cid:8)$(cid:9)(cid:9)(cid:14)(cid:15)#(cid:2)(cid:12)(cid:28)(cid:8)/(cid:28)(cid:17)(cid:14)(cid:2)!(cid:9)(cid:28)-(cid:7)(cid:15)(cid:17) 0(cid:2)(cid:12)(cid:16)(cid:14)(cid:28) (cid:14)(cid:2) (cid:14)(cid:14)(cid:2)#(cid:11)(cid:14)(cid:2)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:2)1(cid:28)(cid:8)/(cid:28)(cid:17)(cid:7)(cid:15)(cid:17)(cid:2)(cid:22)(cid:12)(cid:14)(cid:8)(cid:7)%(cid:7)(cid:8)(cid:28)#(cid:7)(cid:10)(cid:15)(cid:2)(cid:16)(cid:10)(cid:8)(cid:28)#(cid:14)!(cid:2)(cid:28)#(cid:2) (cid:11)##(cid:12)+22---(cid:20)(cid:31)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:20)(cid:8)(cid:10)(cid:31)2(cid:12)(cid:28)(cid:8)/(cid:28)(cid:17)(cid:7)(cid:15)(cid:17) b N E E1 1 2 e e1 D c A A2 φ A1 L 3(cid:15)(cid:7)# (cid:6)(cid:19)44(cid:19)(cid:6)"(cid:13)"(cid:26)(cid:22) (cid:21)(cid:7)(cid:31)(cid:14)(cid:15) (cid:7)(cid:10)(cid:15)(cid:2)4(cid:7)(cid:31)(cid:7)# (cid:6)(cid:19)5 56(cid:6) (cid:6)(cid:25)7 5$(cid:31)8(cid:14)(cid:9)(cid:2)(cid:10)%(cid:2)1(cid:7)(cid:15) 5 (cid:29) 4(cid:14)(cid:28)!(cid:2)1(cid:7)#(cid:8)(cid:11) (cid:14) (cid:4)(cid:20)(cid:24)((cid:2))(cid:22)* 6$# (cid:7)!(cid:14)(cid:2)4(cid:14)(cid:28)!(cid:2)1(cid:7)#(cid:8)(cid:11) (cid:14)(cid:30) (cid:30)(cid:20)(cid:24)(cid:4)(cid:2))(cid:22)* 6,(cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2):(cid:14)(cid:7)(cid:17)(cid:11)# (cid:25) (cid:4)(cid:20);(cid:24) < (cid:30)(cid:20)(cid:30)(cid:3) (cid:6)(cid:10)(cid:16)!(cid:14)!(cid:2)1(cid:28)(cid:8)/(cid:28)(cid:17)(cid:14)(cid:2)(cid:13)(cid:11)(cid:7)(cid:8)/(cid:15)(cid:14) (cid:25)(cid:3) (cid:4)(cid:20)(cid:5)(cid:24) (cid:4)(cid:20)(cid:24)( (cid:30)(cid:20)(cid:4)(cid:3) (cid:22)#(cid:28)(cid:15)!(cid:10)%% (cid:25)(cid:30) (cid:4)(cid:20)(cid:4)(cid:30) < (cid:4)(cid:20)(cid:30)(cid:4) 6,(cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2)=(cid:7)!#(cid:11) " (cid:3)(cid:20)(cid:30)(cid:4) < (cid:3)(cid:20)9(cid:23) (cid:6)(cid:10)(cid:16)!(cid:14)!(cid:2)1(cid:28)(cid:8)/(cid:28)(cid:17)(cid:14)(cid:2)=(cid:7)!#(cid:11) "(cid:30) (cid:30)(cid:20)(cid:30)9 (cid:30)(cid:20)(cid:29)(cid:4) (cid:30)(cid:20)(cid:23)(cid:4) 6,(cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2)4(cid:14)(cid:15)(cid:17)#(cid:11) (cid:21) (cid:3)(cid:20)9(cid:5) (cid:3)(cid:20)(cid:24)(cid:4) (cid:29)(cid:20)(cid:4)( .(cid:10)(cid:10)#(cid:2)4(cid:14)(cid:15)(cid:17)#(cid:11) 4 (cid:4)(cid:20)(cid:30)(cid:29) (cid:4)(cid:20)((cid:4) (cid:4)(cid:20)9(cid:4) .(cid:10)(cid:10)#(cid:2)(cid:25)(cid:15)(cid:17)(cid:16)(cid:14) (cid:3) (cid:4)> < (cid:30)(cid:4)> 4(cid:14)(cid:28)!(cid:2)(cid:13)(cid:11)(cid:7)(cid:8)/(cid:15)(cid:14) (cid:8) (cid:4)(cid:20)(cid:4); < (cid:4)(cid:20)(cid:3)(cid:4) 4(cid:14)(cid:28)!(cid:2)=(cid:7)!#(cid:11) 8 (cid:4)(cid:20)(cid:29)(cid:4) < (cid:4)(cid:20)((cid:23) (cid:30)(cid:22)(cid:12)(cid:5)(cid:11)(cid:31) (cid:30)(cid:20) (cid:21)(cid:7)(cid:31)(cid:14)(cid:15) (cid:7)(cid:10)(cid:15) (cid:2)(cid:21)(cid:2)(cid:28)(cid:15)!(cid:2)"(cid:30)(cid:2)!(cid:10)(cid:2)(cid:15)(cid:10)#(cid:2)(cid:7)(cid:15)(cid:8)(cid:16)$!(cid:14)(cid:2)(cid:31)(cid:10)(cid:16)!(cid:2)%(cid:16)(cid:28) (cid:11)(cid:2)(cid:10)(cid:9)(cid:2)(cid:12)(cid:9)(cid:10)#(cid:9)$ (cid:7)(cid:10)(cid:15) (cid:20)(cid:2)(cid:6)(cid:10)(cid:16)!(cid:2)%(cid:16)(cid:28) (cid:11)(cid:2)(cid:10)(cid:9)(cid:2)(cid:12)(cid:9)(cid:10)#(cid:9)$ (cid:7)(cid:10)(cid:15) (cid:2) (cid:11)(cid:28)(cid:16)(cid:16)(cid:2)(cid:15)(cid:10)#(cid:2)(cid:14)&(cid:8)(cid:14)(cid:14)!(cid:2)(cid:4)(cid:20)(cid:3)((cid:2)(cid:31)(cid:31)(cid:2)(cid:12)(cid:14)(cid:9)(cid:2) (cid:7)!(cid:14)(cid:20) (cid:3)(cid:20) (cid:21)(cid:7)(cid:31)(cid:14)(cid:15) (cid:7)(cid:10)(cid:15)(cid:7)(cid:15)(cid:17)(cid:2)(cid:28)(cid:15)!(cid:2)#(cid:10)(cid:16)(cid:14)(cid:9)(cid:28)(cid:15)(cid:8)(cid:7)(cid:15)(cid:17)(cid:2)(cid:12)(cid:14)(cid:9)(cid:2)(cid:25)(cid:22)(cid:6)"(cid:2)’(cid:30)(cid:23)(cid:20)((cid:6)(cid:20) )(cid:22)*+ )(cid:28) (cid:7)(cid:8)(cid:2)(cid:21)(cid:7)(cid:31)(cid:14)(cid:15) (cid:7)(cid:10)(cid:15)(cid:20)(cid:2)(cid:13)(cid:11)(cid:14)(cid:10)(cid:9)(cid:14)#(cid:7)(cid:8)(cid:28)(cid:16)(cid:16)(cid:18)(cid:2)(cid:14)&(cid:28)(cid:8)#(cid:2),(cid:28)(cid:16)$(cid:14)(cid:2) (cid:11)(cid:10)-(cid:15)(cid:2)-(cid:7)#(cid:11)(cid:10)$#(cid:2)#(cid:10)(cid:16)(cid:14)(cid:9)(cid:28)(cid:15)(cid:8)(cid:14) (cid:20) (cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:13)(cid:14)(cid:8)(cid:11)(cid:15)(cid:10)(cid:16)(cid:10)(cid:17)(cid:18)(cid:21)(cid:9)(cid:28)-(cid:7)(cid:15)(cid:17)*(cid:4)(cid:23)(cid:27)(cid:30)(cid:4)(cid:23))  2005-2016 Microchip Technology Inc. DS20001942G-page 13

MCP9700/9700A and MCP9701/9701A Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging DS20001942G-page 14  2005-2016 Microchip Technology Inc.

MCP9700/9700A and MCP9701/9701A !(cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:6)(cid:11)(cid:12)(cid:13)(cid:14)(cid:8)(cid:20)(cid:21)(cid:6)(cid:19)(cid:11)(cid:13)(cid:11)(cid:12)(cid:22)(cid:21)(cid:8)(cid:17)(cid:18)(cid:12)(cid:10)(cid:13)(cid:19)(cid:5)(cid:8)(cid:23)(cid:20)(cid:17)(cid:24)(cid:8)(cid:25)(cid:20)(cid:17)(cid:3)#"(cid:29) (cid:30)(cid:22)(cid:12)(cid:5)(cid:31) .(cid:10)(cid:9)(cid:2)#(cid:11)(cid:14)(cid:2)(cid:31)(cid:10) #(cid:2)(cid:8)$(cid:9)(cid:9)(cid:14)(cid:15)#(cid:2)(cid:12)(cid:28)(cid:8)/(cid:28)(cid:17)(cid:14)(cid:2)!(cid:9)(cid:28)-(cid:7)(cid:15)(cid:17) 0(cid:2)(cid:12)(cid:16)(cid:14)(cid:28) (cid:14)(cid:2) (cid:14)(cid:14)(cid:2)#(cid:11)(cid:14)(cid:2)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:2)1(cid:28)(cid:8)/(cid:28)(cid:17)(cid:7)(cid:15)(cid:17)(cid:2)(cid:22)(cid:12)(cid:14)(cid:8)(cid:7)%(cid:7)(cid:8)(cid:28)#(cid:7)(cid:10)(cid:15)(cid:2)(cid:16)(cid:10)(cid:8)(cid:28)#(cid:14)!(cid:2)(cid:28)#(cid:2) (cid:11)##(cid:12)+22---(cid:20)(cid:31)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:20)(cid:8)(cid:10)(cid:31)2(cid:12)(cid:28)(cid:8)/(cid:28)(cid:17)(cid:7)(cid:15)(cid:17) (cid:2) E A 1 N L 1 2 3 b e c D R 3(cid:15)(cid:7)# (cid:19)5*:"(cid:22) (cid:21)(cid:7)(cid:31)(cid:14)(cid:15) (cid:7)(cid:10)(cid:15)(cid:2)4(cid:7)(cid:31)(cid:7)# (cid:6)(cid:19)5 (cid:6)(cid:25)7 5$(cid:31)8(cid:14)(cid:9)(cid:2)(cid:10)%(cid:2)1(cid:7)(cid:15) 5 (cid:29) 1(cid:7)#(cid:8)(cid:11) (cid:14) (cid:20)(cid:4)((cid:4)(cid:2))(cid:22)* )(cid:10)##(cid:10)(cid:31)(cid:2)#(cid:10)(cid:2)1(cid:28)(cid:8)/(cid:28)(cid:17)(cid:14)(cid:2).(cid:16)(cid:28)# (cid:21) (cid:20)(cid:30)(cid:3)( (cid:20)(cid:30)9( 6,(cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2)=(cid:7)!#(cid:11) " (cid:20)(cid:30)(cid:5)( (cid:20)(cid:3)(cid:4)( 6,(cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2)4(cid:14)(cid:15)(cid:17)#(cid:11) (cid:25) (cid:20)(cid:30)(cid:5)(cid:4) (cid:20)(cid:3)(cid:30)(cid:4) (cid:6)(cid:10)(cid:16)!(cid:14)!(cid:2)1(cid:28)(cid:8)/(cid:28)(cid:17)(cid:14)(cid:2)(cid:26)(cid:28)!(cid:7)$ (cid:26) (cid:20)(cid:4);(cid:4) (cid:20)(cid:30)(cid:4)( (cid:13)(cid:7)(cid:12)(cid:2)#(cid:10)(cid:2)(cid:22)(cid:14)(cid:28)#(cid:7)(cid:15)(cid:17)(cid:2)1(cid:16)(cid:28)(cid:15)(cid:14) 4 (cid:20)((cid:4)(cid:4) < 4(cid:14)(cid:28)!(cid:2)(cid:13)(cid:11)(cid:7)(cid:8)/(cid:15)(cid:14) (cid:8) (cid:20)(cid:4)(cid:30)(cid:23) (cid:20)(cid:4)(cid:3)(cid:30) 4(cid:14)(cid:28)!(cid:2)=(cid:7)!#(cid:11) 8 (cid:20)(cid:4)(cid:30)(cid:23) (cid:20)(cid:4)(cid:3)(cid:3) (cid:30)(cid:22)(cid:12)(cid:5)(cid:11)(cid:31) (cid:30)(cid:20) (cid:21)(cid:7)(cid:31)(cid:14)(cid:15) (cid:7)(cid:10)(cid:15) (cid:2)(cid:25)(cid:2)(cid:28)(cid:15)!(cid:2)"(cid:2)!(cid:10)(cid:2)(cid:15)(cid:10)#(cid:2)(cid:7)(cid:15)(cid:8)(cid:16)$!(cid:14)(cid:2)(cid:31)(cid:10)(cid:16)!(cid:2)%(cid:16)(cid:28) (cid:11)(cid:2)(cid:10)(cid:9)(cid:2)(cid:12)(cid:9)(cid:10)#(cid:9)$ (cid:7)(cid:10)(cid:15) (cid:20)(cid:2)(cid:6)(cid:10)(cid:16)!(cid:2)%(cid:16)(cid:28) (cid:11)(cid:2)(cid:10)(cid:9)(cid:2)(cid:12)(cid:9)(cid:10)#(cid:9)$ (cid:7)(cid:10)(cid:15) (cid:2) (cid:11)(cid:28)(cid:16)(cid:16)(cid:2)(cid:15)(cid:10)#(cid:2)(cid:14)&(cid:8)(cid:14)(cid:14)!(cid:2)(cid:20)(cid:4)(cid:4)(?(cid:2)(cid:12)(cid:14)(cid:9)(cid:2) (cid:7)!(cid:14)(cid:20) (cid:3)(cid:20) (cid:21)(cid:7)(cid:31)(cid:14)(cid:15) (cid:7)(cid:10)(cid:15)(cid:7)(cid:15)(cid:17)(cid:2)(cid:28)(cid:15)!(cid:2)#(cid:10)(cid:16)(cid:14)(cid:9)(cid:28)(cid:15)(cid:8)(cid:7)(cid:15)(cid:17)(cid:2)(cid:12)(cid:14)(cid:9)(cid:2)(cid:25)(cid:22)(cid:6)"(cid:2)’(cid:30)(cid:23)(cid:20)((cid:6)(cid:20) )(cid:22)*+ )(cid:28) (cid:7)(cid:8)(cid:2)(cid:21)(cid:7)(cid:31)(cid:14)(cid:15) (cid:7)(cid:10)(cid:15)(cid:20)(cid:2)(cid:13)(cid:11)(cid:14)(cid:10)(cid:9)(cid:14)#(cid:7)(cid:8)(cid:28)(cid:16)(cid:16)(cid:18)(cid:2)(cid:14)&(cid:28)(cid:8)#(cid:2),(cid:28)(cid:16)$(cid:14)(cid:2) (cid:11)(cid:10)-(cid:15)(cid:2)-(cid:7)#(cid:11)(cid:10)$#(cid:2)#(cid:10)(cid:16)(cid:14)(cid:9)(cid:28)(cid:15)(cid:8)(cid:14) (cid:20) (cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:13)(cid:14)(cid:8)(cid:11)(cid:15)(cid:10)(cid:16)(cid:10)(cid:17)(cid:18)(cid:21)(cid:9)(cid:28)-(cid:7)(cid:15)(cid:17)*(cid:4)(cid:23)(cid:27)(cid:30)(cid:4)(cid:30))  2005-2016 Microchip Technology Inc. DS20001942G-page 15

MCP9700/9700A and MCP9701/9701A NOTES: DS20001942G-page 16  2005-2016 Microchip Technology Inc.

MCP9700/9700A and MCP9701/9701A APPENDIX A: REVISION HISTORY Revision A (November 2005) • Original release of this document. Revision G (June 2016) The following is the list of modifications: 1. Added the MCP9700T-H/TT package version. 2. Minor typographical changes. Revision F (July 2014) The following is the list of modifications: 3. Updated the Package Type information. 4. Note 4 in the DC Electrical Characteristics table was added. 5. Updated the Temperature Range in the Product Identification System section. 6. Added maximum IDD specification for the High Temperature device. Revision E (April 2009) The following is the list of modifications: 1. Added High Temperature option throughout document. 2. Updated plots to reflect the high temperature performance. 3. Updated Package Outline drawings. 4. Updated Revision history. Revision D (October 2007) The following is the list of modifications: 1. Added the 3-lead SOT-23 devices to data sheet. 2. Replaced Figure 2-15. 3. Updated Package Outline Drawings. Revision C (June 2006) The following is the list of modifications: 1. Added the MCP9700A and MCP9701A devices to data sheet. 2. Added TO92 package for the MCP9700/MCP9701. Revision B (October 2005) The following is the list of modifications: 1. Added Section3.0 “Pin Descriptions”. 2. Added the Linear Active Thermistor™ IC trademark. 3. Removed the 2nd order temperature equation and the temperature coeficient histogram. 4. Added a reference to AN1001 and correspond- ing verbiage. 5. Added Figure4-2 and corresponding verbiage.  2005-2016 Microchip Technology Inc. DS20001942G-page 17

MCP9700/9700A and MCP9701/9701A NOTES: DS20001942G-page 18  2005-2016 Microchip Technology Inc.

MCP9700/9700A and MCP9701/9701A PRODUCT IDENTIFICATION SYSTEM To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office. PART NO. X (1) –X /XX Examples: a) MCP9700T-E/LT: Linear Active Thermistor IC Device Tape and Reel Temperature Package Tape and Reel Option Range Extended temperature 5LD SC70 package Device: MCP9700: Linear Active Thermistor™ IC b) MCP9700-E/TO: Linear Active Thermistor IC MCP9700A: Linear Active Thermistor™ IC Extended temperature MCP9701: Linear Active Thermistor™ IC 3LD TO-92 package MCP9701A: Linear Active Thermistor™ IC c) MCP9700T-E/TT: Linear Active Thermistor IC Tape and Reel Extended temperature Tape and Reel: T = Tape and Reel (1) 3LD SOT-23 package Blank = Tube d) MCP9700T-H/LT: Linear Active Thermistor IC Tape and Reel High temperature Temperature Range: E = -40C to +125C (Extended Temperature) 5LD SC70 package H = -40C to +150C (High Temperature) a) MCP9700AT-E/LT: Linear Active Thermistor IC (MCP9700, SOT-23-3 and SC70-5 only) Tape and Reel Extended temperature 5LD SC70 package Package: LT = Plastic Small Outline Transistor, 5-lead b) MCP9700A-E/TO: Linear Active Thermistor IC TO = Plastic Transistor Outline, 3-lead Extended temperature TT = Plastic Small Outline Transistor, 3-lead 3LD TO-92 package c) MCP9700AT-E/TT: Linear Active Thermistor IC Tape and Reel Extended temperature 3LD SOT-23 package a) MCP9701T-E/LT: Linear Active Thermistor IC Tape and Reel Extended temperature 5LD SC70 package b) MCP9701-E/TO: Linear Active Thermistor IC Extended temperature 3LD TO-92 package c) MCP9701T-E/TT: Linear Active Thermistor IC Tape and Reel Extended temperature 3LD SOT-23 package a) MCP9701AT-E/LT: Linear Active Thermistor IC Tape and Reel Extended temperature 5LD SC70 package b) MCP9701A-E/TO: Linear Active Thermistor IC Extended temperature 3LD TO-92 package c) MCP9701AT-E/TT: Linear Active Thermistor IC Tape and Reel Extended Temperature 3LD SOT-23 package a) MCP9700T-H/TT: Linear Active Thermistor IC Tape and Reel High Temperature 3LD SOT-23 package b) MCP9700T-H/LT: Linear Active Thermistor IC Tape and Reel High Temperature 5LD SC70 package Note1: Tape and Reel identifier only appears in the catalog part number description. This identifier is used for ordering purposes and is not printed on the device package. Check with your Microchip Sales Office for package availability with the Tape and Reel option.  2005-2016 Microchip Technology Inc. DS20001942G-page 19

MCP9700/9700A and MCP9701/9701A NOTES: DS20001942G-page 20  2005-2016 Microchip Technology Inc.

Note the following details of the code protection feature on Microchip devices: • Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device Trademarks applications and the like is provided only for your convenience The Microchip name and logo, the Microchip logo, AnyRate, and may be superseded by updates. It is your responsibility to dsPIC, FlashFlex, flexPWR, Heldo, JukeBlox, KeeLoq, ensure that your application meets with your specifications. KeeLoq logo, Kleer, LANCheck, LINK MD, MediaLB, MOST, MICROCHIP MAKES NO REPRESENTATIONS OR MOST logo, MPLAB, OptoLyzer, PIC, PICSTART, PIC32 logo, WARRANTIES OF ANY KIND WHETHER EXPRESS OR RightTouch, SpyNIC, SST, SST Logo, SuperFlash and UNI/O IMPLIED, WRITTEN OR ORAL, STATUTORY OR are registered trademarks of Microchip Technology OTHERWISE, RELATED TO THE INFORMATION, Incorporated in the U.S.A. and other countries. INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR ClockWorks, The Embedded Control Solutions Company, FITNESS FOR PURPOSE. Microchip disclaims all liability ETHERSYNCH, Hyper Speed Control, HyperLight Load, arising from this information and its use. Use of Microchip IntelliMOS, mTouch, Precision Edge, and QUIET-WIRE are devices in life support and/or safety applications is entirely at registered trademarks of Microchip Technology Incorporated the buyer’s risk, and the buyer agrees to defend, indemnify and in the U.S.A. hold harmless Microchip from any and all damages, claims, Analog-for-the-Digital Age, Any Capacitor, AnyIn, AnyOut, suits, or expenses resulting from such use. No licenses are BodyCom, chipKIT, chipKIT logo, CodeGuard, dsPICDEM, conveyed, implicitly or otherwise, under any Microchip dsPICDEM.net, Dynamic Average Matching, DAM, ECAN, intellectual property rights unless otherwise stated. EtherGREEN, In-Circuit Serial Programming, ICSP, Inter-Chip Connectivity, JitterBlocker, KleerNet, KleerNet logo, MiWi, motorBench, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, PureSilicon, RightTouch logo, REAL ICE, Ripple Blocker, Serial Quad I/O, SQI, SuperSwitcher, SuperSwitcher II, Total Endurance, TSHARC, USBCheck, VariSense, ViewSpan, WiperLock, Wireless DNA, and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. Microchip received ISO/TS-16949:2009 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Silicon Storage Technology is a registered trademark of Tempe, Arizona; Gresham, Oregon and design centers in California Microchip Technology Inc. in other countries. and India. The Company’s quality system processes and procedures are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping GestIC is a registered trademarks of Microchip Technology devices, Serial EEPROMs, microperipherals, nonvolatile memory and Germany II GmbH & Co. KG, a subsidiary of Microchip analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified. Technology Inc., in other countries. All other trademarks mentioned herein are property of their respective companies. QUALITY MANAGEMENT SYSTEM © 2005-2016, Microchip Technology Incorporated, Printed in CERTIFIED BY DNV the U.S.A., All Rights Reserved. ISBN: 978-1-5224-0666-2 == ISO/TS 16949 ==  2005-2016 Microchip Technology Inc. DS20001942G-page 21

Worldwide Sales and Service AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Corporate Office Asia Pacific Office China - Xiamen Austria - Wels 2355 West Chandler Blvd. Suites 3707-14, 37th Floor Tel: 86-592-2388138 Tel: 43-7242-2244-39 Chandler, AZ 85224-6199 Tower 6, The Gateway Fax: 86-592-2388130 Fax: 43-7242-2244-393 Tel: 480-792-7200 Harbour City, Kowloon China - Zhuhai Denmark - Copenhagen Fax: 480-792-7277 Hong Kong Tel: 86-756-3210040 Tel: 45-4450-2828 Technical Support: Tel: 852-2943-5100 Fax: 86-756-3210049 Fax: 45-4485-2829 http://www.microchip.com/ Fax: 852-2401-3431 India - Bangalore France - Paris support Australia - Sydney Tel: 91-80-3090-4444 Tel: 33-1-69-53-63-20 Web Address: Tel: 61-2-9868-6733 Fax: 91-80-3090-4123 Fax: 33-1-69-30-90-79 www.microchip.com Fax: 61-2-9868-6755 India - New Delhi Germany - Dusseldorf Atlanta China - Beijing Tel: 91-11-4160-8631 Tel: 49-2129-3766400 Duluth, GA Tel: 678-957-9614 Tel: 86-10-8569-7000 Fax: 91-11-4160-8632 Germany - Karlsruhe Fax: 678-957-1455 Fax: 86-10-8528-2104 India - Pune Tel: 49-721-625370 China - Chengdu Tel: 91-20-3019-1500 Germany - Munich Austin, TX Tel: 512-257-3370 Tel: 86-28-8665-5511 Japan - Osaka Tel: 49-89-627-144-0 Fax: 86-28-8665-7889 Tel: 81-6-6152-7160 Fax: 49-89-627-144-44 Boston Westborough, MA China - Chongqing Fax: 81-6-6152-9310 Italy - Milan Tel: 774-760-0087 Tel: 86-23-8980-9588 Japan - Tokyo Tel: 39-0331-742611 Fax: 86-23-8980-9500 Tel: 81-3-6880- 3770 Fax: 39-0331-466781 Fax: 774-760-0088 China - Dongguan Fax: 81-3-6880-3771 Italy - Venice Chicago Itasca, IL Tel: 86-769-8702-9880 Korea - Daegu Tel: 39-049-7625286 Tel: 630-285-0071 China - Hangzhou Tel: 82-53-744-4301 Netherlands - Drunen Fax: 630-285-0075 Tel: 86-571-8792-8115 Fax: 82-53-744-4302 Tel: 31-416-690399 Fax: 86-571-8792-8116 Korea - Seoul Fax: 31-416-690340 Cleveland Independence, OH China - Hong Kong SAR Tel: 82-2-554-7200 Poland - Warsaw Tel: 216-447-0464 Tel: 852-2943-5100 Fax: 82-2-558-5932 or Tel: 48-22-3325737 Fax: 852-2401-3431 82-2-558-5934 Fax: 216-447-0643 Spain - Madrid Dallas China - Nanjing Malaysia - Kuala Lumpur Tel: 34-91-708-08-90 Addison, TX Tel: 86-25-8473-2460 Tel: 60-3-6201-9857 Fax: 34-91-708-08-91 Fax: 86-25-8473-2470 Fax: 60-3-6201-9859 Tel: 972-818-7423 Sweden - Stockholm Fax: 972-818-2924 China - Qingdao Malaysia - Penang Tel: 46-8-5090-4654 Tel: 86-532-8502-7355 Tel: 60-4-227-8870 Detroit UK - Wokingham Fax: 86-532-8502-7205 Fax: 60-4-227-4068 Novi, MI Tel: 44-118-921-5800 Tel: 248-848-4000 China - Shanghai Philippines - Manila Fax: 44-118-921-5820 Tel: 86-21-5407-5533 Tel: 63-2-634-9065 Houston, TX Fax: 86-21-5407-5066 Fax: 63-2-634-9069 Tel: 281-894-5983 China - Shenyang Singapore Indianapolis Tel: 86-24-2334-2829 Tel: 65-6334-8870 Noblesville, IN Fax: 86-24-2334-2393 Fax: 65-6334-8850 Tel: 317-773-8323 Fax: 317-773-5453 China - Shenzhen Taiwan - Hsin Chu Tel: 86-755-8864-2200 Tel: 886-3-5778-366 Los Angeles Fax: 86-755-8203-1760 Fax: 886-3-5770-955 Mission Viejo, CA Tel: 949-462-9523 China - Wuhan Taiwan - Kaohsiung Fax: 949-462-9608 Tel: 86-27-5980-5300 Tel: 886-7-213-7828 New York, NY Fax: 86-27-5980-5118 Taiwan - Taipei Tel: 631-435-6000 China - Xian Tel: 886-2-2508-8600 Tel: 86-29-8833-7252 Fax: 886-2-2508-0102 San Jose, CA Tel: 408-735-9110 Fax: 86-29-8833-7256 Thailand - Bangkok Tel: 66-2-694-1351 Canada - Toronto Fax: 66-2-694-1350 Tel: 905-673-0699 Fax: 905-673-6509 07/14/15 DS20001942G-page 22  2005-2016 Microchip Technology Inc.