MCP9700/9700A MCP9701/9701A Low-Power Linear Active Thermistor™ ICs Features: Description: • Tiny Analog Temperature Sensor MCP9700/9700A and MCP9701/9701A sensors with • Available Packages: Linear Active Thermistor™ Integrated Circuit (IC) com- prise a family of analog temperature sensors that - SC70-5, SOT-23-5, TO-92-3 convert temperature to analog voltage. • Wide Temperature Measurement Range: The low-cost, low-power sensors feature an accuracy - -40°C to +125°C (Extended Temperature) of ±2°C from 0°C to +70°C (MCP9700A/9701A) and - -40°C to +150°C (High Temperature) ±4°C from 0°C to +70°C (MCP9700/9701) while (MCP9700) consuming 6µA (typical) of operating current. • Accuracy: Unlike resistive sensors, e.g., thermistors, the Linear - ±2°C (max.), 0°C to +70°C (MCP9700A/9701A) Active Thermistor IC does not require an additional sig- - ±4°C (max.), 0°C to +70°C (MCP9700/9701) nal-conditioning circuit. Therefore, the biasing circuit • Optimized for Analog-to-Digital Converters development overhead for thermistor solutions can be (ADCs): avoided by implementing this low-cost device. The - 10.0mV/°C (typical) MCP9700/9700A Voltage Output pin (VOUT) can be directly connected to - 19.5mV/°C (typical) MCP9701/9701A the ADC input of a microcontroller. The MCP9700/ 9700A and MCP9701/9701A temperature coefficients • Wide Operating Voltage Range: are scaled to provide a 1°C/bit resolution for an 8-bit - V = 2.3V to 5.5V MCP9700/9700A DD ADC with a reference voltage of 2.5V and 5V, respec- - VDD = 3.1V to 5.5V MCP9701/9701A tively. The MCP9700/9700A output 0.1°C/bit for a 12- • Low Operating Current: 6µA (typical) bit ADC with 4.096V reference. • Optimized to Drive Large Capacitive Loads The MCP9700/9700A and MCP9701/9701A provide a low-cost solution for applications that require measure- Typical Applications: ment of a relative change of temperature. When mea- suring relative change in temperature from +25°C, an • Hard Disk Drives and Other PC Peripherals accuracy of ±1°C (typical) can be realized from 0°C to • Entertainment Systems +70°C. This accuracy can also be achieved by applying • Home Appliance system calibration at +25°C. • Office Equipment In addition, this family is immune to the effects of para- • Battery Packs and Portable Equipment sitic capacitance and can drive large capacitive loads. • General Purpose Temperature Monitoring This provides printed circuit board (PCB) layout design flexibility by enabling the device to be remotely located from the microcontroller. Adding some capacitance at the output also helps the output transient response by reducing overshoots or undershoots. However, capaci- tive load is not required for the stability of sensor out- put. Package Type 3-Pin TO-92 3-Pin SOT-23 5-Pin SC70 MCP9700/9700A MCP9700/9700A MCP9700/9700A MCP9701/9701A MCP9701/9701A MCP9701/9701A GND NC 1 5 NC 1 23 3 GND 2 Bottom VOUT 3 4 VDD View 1 2 1 VDD VOUTGND VDD VOUT  2005-2014 Microchip Technology Inc. DS20001942F-page 1

MCP9700/9700A and MCP9701/9701A 1.0 ELECTRICAL †Notice: Stresses above those listed under “Maximum Ratings” may cause permanent damage to the device. This is CHARACTERISTICS a stress rating only and functional operation of the device at those or any other conditions above those indicated in the Absolute Maximum Ratings † operational listings of this specification is not implied. Exposure to maximum rating conditions for extended periods VDD:...................................................................... 6.0V may affect device reliability. Storage temperature:........................ -65°C to +150°C Ambient Temp. with Power Applied:.. -40°C to +150°C Output Current.................................................±30mA Junction Temperature (T ):.................................150°C J ESD Protection On All Pins (HBM:MM):....(4kV:200V) Latch-Up Current at Each Pin:...................... ±200mA DC ELECTRICAL CHARACTERISTICS Electrical Specifications: Unless otherwise indicated: MCP9700/9700A: V = 2.3V to 5.5V, GND = Ground, T = -40°C to +125°C and No load. DD A MCP9701/9701A: V = 3.1V to 5.5V, GND = Ground, T = -10°C to +125°C and No load. DD A Parameter Sym. Min. Typ. Max. Unit Conditions Power Supply Operating Voltage Range V 2.3 — 5.5 V MCP9700/9700A DD V 3.1 — 5.5 V MCP9701/9701A DD Operating Current I — 6 12 µA DD I — — 15 µA TA = 150°C (Note4) DD Power Supply Rejection °C/V — 0.1 — °C/V DD Sensor Accuracy (Notes1,2) T = +25°C T — ±1 — °C A ACY T = 0°C to +70°C T -2.0 ±1 +2.0 °C MCP9700A/9701A A ACY T = -40°C to +125°C T -2.0 ±1 +4.0 °C MCP9700A A ACY T = -10°C to +125°C T -2.0 ±1 +4.0 °C MCP9701A A ACY T = 0°C to +70°C T -4.0 ±2 +4.0 °C MCP9700/9701 A ACY T = -40°C to +125°C T -4.0 ±2 +6.0 °C MCP9700 A ACY T = -10°C to +125°C T -4.0 ±2 +6.0 °C MCP9701 A ACY T = -40°C to +150°C T -4.0 ±2 +6.0 °C HighTemperature (Note4) A ACY Sensor Output Output Voltage, T = 0°C V — 500 — mV MCP9700/9700A A 0°C Output Voltage, T = 0°C V — 400 — mV MCP9701/9701A A 0°C Temperature Coefficient T — 10.0 — mV/°C MCP9700/9700A C T — 19.5 — mV/°C MCP9701/9701A C Output Nonlinearity V — ±0.5 — °C T = 0°C to +70°C (Note2) ONL A Note 1: The MCP9700/9700A family accuracy is tested with V = 3.3V, while the MCP9701/9701A accuracy is DD tested with V = 5.0V. DD 2: The MCP9700/9700A and MCP9701/9701A family is characterized using the first-order or linear equation, as shown in Equation4-2. Also refer to Figure2-16. 3: SC70-5 package thermal response with 1x1 inch, dual-sided copper clad, TO-92-3 package thermal response without PCB (leaded). 4: MCP9700 with SC70-5 and SOT23-3 packages only. The MCP9700 High Temperature is not available with TO-92 package. 5: The MCP9700/9700A and MCP9701/9701A family is characterized and production tested with a capacitive load of 1000pF. DS20001942F-page 2  2005-2014 Microchip Technology Inc.

MCP9700/9700A and MCP9701/9701A DC ELECTRICAL CHARACTERISTICS (CONTINUED) Electrical Specifications: Unless otherwise indicated: MCP9700/9700A: V = 2.3V to 5.5V, GND = Ground, T = -40°C to +125°C and No load. DD A MCP9701/9701A: V = 3.1V to 5.5V, GND = Ground, T = -10°C to +125°C and No load. DD A Parameter Sym. Min. Typ. Max. Unit Conditions Output Current I — — 100 µA OUT Output Impedance Z — 20 —  I = 100µA, f = 500Hz OUT OUT Output Load Regulation V / — 1 —  T = 0°C to +70°C, OUT A I I = 100µA OUT OUT Turn-On Time t — 800 — µs ON Typical Load Capacitance C — — 1000 pF (Note5) LOAD SC-70 Thermal Response to 63% t — 1.3 — s 30°C (Air) to +125°C RES (Fluid Bath) (Note3) TO-92 Thermal Response to 63% t — 1.65 — s RES Note 1: The MCP9700/9700A family accuracy is tested with V = 3.3V, while the MCP9701/9701A accuracy is DD tested with V = 5.0V. DD 2: The MCP9700/9700A and MCP9701/9701A family is characterized using the first-order or linear equation, as shown in Equation4-2. Also refer to Figure2-16. 3: SC70-5 package thermal response with 1x1 inch, dual-sided copper clad, TO-92-3 package thermal response without PCB (leaded). 4: MCP9700 with SC70-5 and SOT23-3 packages only. The MCP9700 High Temperature is not available with TO-92 package. 5: The MCP9700/9700A and MCP9701/9701A family is characterized and production tested with a capacitive load of 1000pF. TMEMPERATURE CHARACTERISTICS Electrical Specifications: Unless otherwise indicated: MCP9700/9700A: V = 2.3V to 5.5V, GND = Ground, T = -40°C to +125°C and No load. DD A MCP9701/9701A: V = 3.1V to 5.5V, GND = Ground, T = -10°C to +125°C and No load. DD A Parameters Sym. Min. Typ. Max. Units Conditions Temperature Ranges Specified Temperature Range (Note1) T -40 — +125 °C MCP9700/9700A A T -10 — +125 °C MCP9701/9701A A T -40 — +150 °C High Temperature, A MCP9700 only Operating Temperature Range T -40 — +125 °C Extended Temperature A T -40 — +150 °C High Temperature A Storage Temperature Range T -65 — +150 °C A Thermal Package Resistances Thermal Resistance, 5LD SC70  — 331 — °C/W JA Thermal Resistance, 3LD SOT-23  — 308 — °C/W JA Thermal Resistance, 3LD TO-92  — 146 — °C/W JA Note 1: Operation in this range must not cause T to exceed Maximum Junction Temperature (+150°C). J  2005-2014 Microchip Technology Inc. DS20001942F-page 3

MCP9700/9700A and MCP9701/9701A 2.0 TYPICAL PERFORMANCE CURVES Note: The graphs and tables provided following this note are a statistical summary based on a limited number of samples and are provided for informational purposes only. The performance characteristics listed herein are not tested or guaranteed. In some graphs or tables, the data presented may be outside the specified operating range (e.g., outside specified power supply range) and therefore outside the warranted range. Note: Unless otherwise indicated, MCP9700/9700A: V = 2.3V to 5.5V; MCP9701/9701A: V = 3.1V to 5.5V; DD DD GND = Ground, C = 0.1µF. bypass 6.0 6.0 5.0 4.0 4.0 MCP9701 y (°C) 3.0 M VCDPD=97 50.01VA y (°C) 2.0 VDD= 5.0V Spec. Limits ac 2.0 Spec. Limits ac cur 1.0 cur 0.0 c c A 0.0 A -2.0 -1.0 MCP9700 MCP9700A VDD= 3.3V VDD= 3.3V -2.0 -4.0 -50 -25 0 25 50 75 100 125 150 -50 -25 0 25 50 75 100 125 150 T (°C) T (°C) A A FIGURE 2-1: Accuracy vs. Ambient FIGURE 2-4: Accuracy vs. Ambient Temperature (MCP9700A/9701A). Temperature (MCP9700/9701). 6.0 0.2 Accuracy (°C) 024...000 MMVVDDCCDDPP ==99 7752..005300VVA MMVVDDCCDDPP==99 5377..0051VV11/A uracy Due to Load (°C)-00..101 ILOAD = 100 µAMCP9M7C00P/ 9M V7C0DD1P /9=MV7 3C0D.D0P3 AV9=7 50.10AV -2.0 cc A ∆ -4.0 -0.2 -50 -25 0 25 50 75 100 125 150 -50 -25 0 25 50 75 100 125 150 TA (°C) TA (°C) FIGURE 2-2: Accuracy vs. Ambient FIGURE 2-5: Changes in Accuracy vs. Temperature, with V . Ambient Temperature (Due to Load). DD 12.0 4.0 Ω) MCP9700/MCP9700A 10.0 MCP9701 ∆I ( 3.0 MVDCDP =9 370.31V/MCP9701A 8.0 MCP9701A ∆V/ IOUT = 50 µA (µA)D 6.0 ation 2.0 IIOOUUTT == 120000 µµAA ID 4.0 MCP9700/MCP9700A gul Re 1.0 2.0 d a o 0.0 L 0.0 -50 -25 0 25 50 75 100 125 150 -50 -25 0 25 50 75 100 125 T (°C) T (°C) A A FIGURE 2-3: Supply Current vs. FIGURE 2-6: Load Regulation vs. Temperature. Ambient Temperature. DS20001942F-page 4  2005-2014 Microchip Technology Inc.

MCP9700/9700A and MCP9701/9701A Note: Unless otherwise indicated, MCP9700/9700A: V = 2.3V to 5.5V; MCP9701/9701A: V = 3.1V to 5.5V; DD DD GND = Ground, C = 0.1µF. bypass 35% 35% 30% V10D8D =sa 3m.3pVles MCP9700A 30% MVDCDP =9 75.001V 108 samples s 25% s 25% e e c c n 20% n 20% urre 15% urre 15% MCP9701A c c c c O 10% MCP9700 O 10% MCP9701 5% 5% 0% 0% 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 4 6 8 0 2 4 6 8 0 0 2 4 6 8 0 2 4 6 8 0 4 4 4 4 4 5 5 5 5 5 6 3 3 3 3 3 4 4 4 4 4 5 V (mV) V (mV) 0°C 0°C FIGURE 2-7: Output Voltage at 0°C FIGURE 2-10: Output Voltage at 0°C (MCP9700/9700A). (MCP9701/9701A). 45% 45% 40% MCP9700 40% MCP9701 MCP9700A MCP9701A 35% 35% ences 2350%% V10D8D =s a3m.3pVles ences 2350%% V10D8D =sa 5m.0pVles urr 20% urr 20% cc 15% cc 15% O O 10% 10% 5% 5% 0% 0% 9.7 9.8 9.8 9.9 10.0 10.1 10.2 10.2 10.3 10.4 10.5 19.2 19.3 19.3 19.4 19.5 19.6 19.7 19.7 19.8 19.9 20.0 T (mV/°C) T (mV/°C) C C FIGURE 2-8: Occurrences vs. FIGURE 2-11: Occurrences vs. Temperature Coefficient (MCP9700/9700A). Temperature Coefficient (MCP9701/9701A). 0.30 0.30 MCP9700/MCP9700A MMCCPP99770011//MMCCPP99770011AA V) 0.25 VDD= 2.3V to 5.5V V) 0.25 VVDDDD== 33..11VV ttoo 55..55VV C/ C/ R (° 0.20 R (° 0.20 R R S 0.15 S 0.15 P P d d ze 0.10 MCP9700/MCP9700A ze 0.10 MMCCPP99770011//MMCCPP99770011AA mali 0.05 VDD= 2.3V to 4.0V mali 0.05 VVDDDD== 33..11VV ttoo 44..00VV or or N N 0.00 0.00 -50 -25 0 25 50 75 100 125 150 -50 -25 0 25 50 75 100 125 T (°C) T (°C) A A FIGURE 2-9: Power Supply Rejection FIGURE 2-12: Power Supply Rejection (°C/V ) vs. Ambient Temperature. (°C/V ) vs. Temperature. DD DD  2005-2014 Microchip Technology Inc. DS20001942F-page 5

MCP9700/9700A and MCP9701/9701A Note: Unless otherwise indicated, MCP9700/9700A: V = 2.3V to 5.5V; MCP9701/9701A: V = 3.1V to 5.5V; DD DD GND = Ground, C = 0.1µF. bypass 1.6 3.0 1.4 TA = +26°C 2.5 1.2 MCP9701 2.0 MCP9701A V) 1.0 V) V (OUT 00..68 V (OUT 11..05 MCP9700 0.4 MCP9700A 0.5 0.2 0.0 0.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 -50 -25 0 25 50 75 100 125 VDD (V) TA (°C) FIGURE 2-13: Output Voltage vs. Power FIGURE 2-16: Output Voltage vs. Ambient Supply. Temperature. 12 2.5 3.0 30.0 108 IDD VDD_TSAT E=P 2=6 5°CV 01..87 I (mA)DD 22..05 IDD VDD_RAMTPA == 5+V2/6m°Cs 61.80.0 I (µA)DD 6 0.0 1.5 -6.0 V (V)OUT 24 VOUT --10..78 V (V)OUT 01..50 VOUT --3108..00 0 -2.5 0.0 -42.0 1 0 1 2 3 4 5 6 7 8 9 0 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 1. 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 - Time (ms) Time (ms) FIGURE 2-14: Output vs. Settling Time to FIGURE 2-17: Output vs. Settling Time to step V . Ramp V . DD DD 130 1000 VDD = 5.0V 105 1 in. x 1 in. Copper ClaSdC P70C-B5 e (Ω) ITOAU T= =+ 21060°C µA nc 100 C) da T (°A80 Leaded, without PCB mpe 55 SC70-5 ut I 10 SOT-23-3 p TO-92-3 ut O 30 1 -2 0 2 4 6 8 10 12 14 16 18 0. 1 10 100 1k 10k 100k 0.1 1 10 100 1000 10000 100000 Time (s) Frequency (Hz) FIGURE 2-15: Thermal Response (Air to FIGURE 2-18: Output Impedance vs. Fluid Bath). Frequency. DS20001942F-page 6  2005-2014 Microchip Technology Inc.

MCP9700/9700A and MCP9701/9701A 3.0 PIN DESCRIPTIONS The descriptions of the pins are listed Table3-1. TABLE 3-1: PIN FUNCTION TABLE Pin No. Pin No. Pin No. Symbol Function SC70 SOT-23 TO-92 1 — — NC No Connect (this pin is not connected to the die). 2 3 3 GND Power Ground Pin 3 2 2 V Output Voltage Pin OUT 4 1 1 V Power Supply Input DD 5 — — NC No Connect (this pin is not connected to the die). 3.1 Power Ground Pin (GND) 3.3 Power Supply Input (V ) DD GND is the system ground pin. The operating voltage as specified in the “DC Electri- cal Characteristics” table is applied to V . DD 3.2 Output Voltage Pin (V ) OUT 3.4 No Connect Pin (NC) The sensor output can be measured at V . The volt- OUT age range over the operating temperature range for the This pin is not connected to the die. It can be used to MCP9700/9700A is 100mV to 1.75V. The voltage improve thermal conduction to the package by con- range over the operating temperature range for the necting it to a printed circuit board (PCB) trace from the MCP9701/9701A is 200mV to 3V. thermal source.  2005-2014 Microchip Technology Inc. DS20001942F-page 7

MCP9700/9700A and MCP9701/9701A 4.0 APPLICATIONS INFORMATION The Linear Active Thermistor™ IC uses an internal 3.0 diode to measure temperature. The diode electrical 2.0 characteristics have a temperature coefficient that pro- vides a change in voltage based on the relative ambi- y (°C) 1.0 ent temperature from -40°C to 150°C. The change in c 0.0 a voltage is scaled to a temperature coefficient of ur cc -1.0 10.0mV/°C (typical) for the MCP9700/9700A and A 19.5mV/°C (typical) for the MCP9701/9701A. The out- -2.0 VDD= 3.3V 10 Samples put voltage at 0°C is also scaled to 500mV (typical) -3.0 and 400mV (typical) for the MCP9700/9700A and -50 -25 0 25 50 75 100 125 MCP9701/9701A, respectively. This linear scale is T (°C) A described in the first-order transfer function shown in Equation4-1 and Figure2-16. FIGURE 4-2: Relative Accuracy to +25°C vs. Temperature. EQUATION 4-1: SENSOR TRANSFER The change in accuracy from the calibration tempera- FUNCTION ture is due to the output nonlinearity from the first-order V = T T +V equation, as specified in Equation4-2. The accuracy OUT C A 0C can be further improved by compensating for the output Where: nonlinearity. T = Ambient Temperature For higher accuracy using a sensor compensation A technique, refer to Application Note 1001, “IC Tem- V = Sensor Output Voltage OUT perature Sensor Accuracy Compensation with a PIC® V = Sensor Output Voltage at 0°C 0°C Microcontroller” (DS01001). The application note (See DC Electrical Characteristics shows that if the MCP9700 is compensated in addition table) to room temperature calibration, the sensor accuracy TC = Temperature Coefficient can be improved to ±0.5°C (typical) accuracy over the (See DC Electrical Characteristics operating temperature (Figure4-3). table) 6.0 100 Samples VDD VDD 4.0 C) y (° 2.0 Spec. Limits c MCP9700 VOUT ANI PIC® cura 0.0 MCU c A GND -2.0 + s Average - s -4.0 V V -50 -25 0 25 50 75 100 125 SS SS Temperature (°C) FIGURE 4-3: MCP9700/9700A Calibrated FIGURE 4-1: Typical Application Circuit. Sensor Accuracy. 4.1 Improving Accuracy The compensation technique provides a linear tem- The MCP9700/9700A and MCP9701/9701A accuracy perature reading. The application note includes com- can be improved by performing a system calibration at pensation firmware so that a look-up table can be a specific temperature. For example, calibrating the generated to compensate for the sensor error. system at +25°C ambient improves the measurement accuracy to a ±0.5°C (typical) from 0°C to +70°C, as shown in Figure4-2. Therefore, when measuring rela- tive temperature change, this family measures tem- perature with higher accuracy. DS20001942F-page 8  2005-2014 Microchip Technology Inc.

MCP9700/9700A and MCP9701/9701A 4.2 Shutdown Using Microcontroller 4.4 Thermal Considerations I/O Pin The MCP9700/9700A and MCP9701/9701A family The 6µA (typical) low operating current of the measures temperature by monitoring the voltage of a MCP9700/9700A and MCP9701/9701A family makes it diode located in the die. A low-impedance thermal path ideal for battery-powered applications. However, for between the die and the PCB is provided by the pins. applications that require a tighter current budget, this Therefore, the sensor effectively monitors the tempera- device can be powered using a microcontroller Input/ ture of the PCB. However, the thermal path for the Output (I/O) pin. The I/O pin can be toggled to shut ambient air is not as efficient because the plastic down the device. In such applications, the microcon- device package functions as a thermal insulator from troller internal digital switching noise is emitted to the the die. This limitation applies to plastic-packaged sili- MCP9700/9700A and MCP9701/9701A as power sup- con temperature sensors. If the application requires the ply noise. However, this switching noise compromises measurment of ambient air, the TO-92 package should measurement accuracy – a decoupling capacitor and be considered. series resistor will be necessary to filter out the system The MCP9700/9700A and MCP9701/9701A sensors noise. are designed to source/sink 100µA (max.). The power dissipation due to the output current is relatively insig- 4.3 Layout Considerations nificant. The effect of the output current can be described using Equation4-2. The MCP9700/9700A and MCP9701/9701A family of sensors does not require any additional components to EQUATION 4-2: EFFECT OF SELF- operate. However, it is recommended that a decoupling HEATING capacitor of 0.1µF to 1µF be used between the V DD and GND pins. In high-noise applications, connect the T –T =  V I +V –V I  J A JA DD DD DD OUT OUT power supply voltage to the V pin using a 200 DD Where: resistor with a 1µF decoupling capacitor. A high fre- quency ceramic capacitor is recommended. It is neces- T = Junction Temperature J sary that the capacitor is located as close as possible T = Ambient Temperature to the V and GND pins in order to provide effective A DD  = Package Thermal Resistance noise protection. In addition, avoid tracing digital lines JA (331°C/W) in close proximity to the sensor. V = Sensor Output Voltage OUT I = Sensor Output Current OUT I = Operating Current DD V = Operating Voltage DD At T = +25°C (V = 0.75V) and maximum specifica- A OUT tion of I =12µA, V = 5.5V and I =+100µA, DD DD OUT the self-heating due to power dissipation (T –T ) is J A 0.179°C.  2005-2014 Microchip Technology Inc. DS20001942F-page 9

MCP9700/9700A and MCP9701/9701A 5.0 PACKAGING INFORMATION 5.1 Package Marking Information 3-Lead SOT-23 Example: Device Code XXNN MCP9700T AENN MCP9700AT AFNN AE25 MCP9701T AMNN MCP9701AT APNN Note: Applies to 3-Lead SOT-23 3-Lead TO-92 Example: XXXXXX MCP XXXXXX 9700E XXXXXX TO^e3^ YWWNNN 916256 5-Lead SC70 Example: Device Code XXNN AU25 MCP9700T AUNN MCP9700AT AXNN MCP9701T AVNN MCP9701AT AYNN Note: Applies to 5-Lead SC70. Legend: XX...X Customer-specific information Y Year code (last digit of calendar year) YY Year code (last 2 digits of calendar year) WW Week code (week of January 1 is week ‘01’) NNN Alphanumeric traceability code e3 Pb-free JEDEC® designator for Matte Tin (Sn) * This package is Pb-free. The Pb-free JEDEC designator ( e 3 ) can be found on the outer packaging for this package. Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-specific information. DS20001942F-page 10  2005-2014 Microchip Technology Inc.

MCP9700/9700A and MCP9701/9701A (cid:2)(cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:6)(cid:11)(cid:12)(cid:13)(cid:14)(cid:8)(cid:15)(cid:16)(cid:6)(cid:10)(cid:10)(cid:8)(cid:17)(cid:18)(cid:12)(cid:10)(cid:13)(cid:19)(cid:5)(cid:8)(cid:20)(cid:21)(cid:6)(cid:19)(cid:11)(cid:13)(cid:11)(cid:12)(cid:22)(cid:21)(cid:8)(cid:23)(cid:4)(cid:20)(cid:24)(cid:8)(cid:25)(cid:15)(cid:26)(cid:27)(cid:28)(cid:29) (cid:30)(cid:22)(cid:12)(cid:5)(cid:31) .(cid:10)(cid:9)(cid:2)#(cid:11)(cid:14)(cid:2)(cid:31)(cid:10) #(cid:2)(cid:8)$(cid:9)(cid:9)(cid:14)(cid:15)#(cid:2)(cid:12)(cid:28)(cid:8)/(cid:28)(cid:17)(cid:14)(cid:2)!(cid:9)(cid:28)-(cid:7)(cid:15)(cid:17) 0(cid:2)(cid:12)(cid:16)(cid:14)(cid:28) (cid:14)(cid:2) (cid:14)(cid:14)(cid:2)#(cid:11)(cid:14)(cid:2)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:2)1(cid:28)(cid:8)/(cid:28)(cid:17)(cid:7)(cid:15)(cid:17)(cid:2)(cid:22)(cid:12)(cid:14)(cid:8)(cid:7)%(cid:7)(cid:8)(cid:28)#(cid:7)(cid:10)(cid:15)(cid:2)(cid:16)(cid:10)(cid:8)(cid:28)#(cid:14)!(cid:2)(cid:28)#(cid:2) (cid:11)##(cid:12)+22---(cid:20)(cid:31)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:20)(cid:8)(cid:10)(cid:31)2(cid:12)(cid:28)(cid:8)/(cid:28)(cid:17)(cid:7)(cid:15)(cid:17) D b 3 2 1 E1 E 4 5 e e A A2 c A1 L 3(cid:15)(cid:7)# (cid:6)(cid:19)44(cid:19)(cid:6)"(cid:13)"(cid:26)(cid:22) (cid:21)(cid:7)(cid:31)(cid:14)(cid:15) (cid:7)(cid:10)(cid:15)(cid:2)4(cid:7)(cid:31)(cid:7)# (cid:6)(cid:19)5 56(cid:6) (cid:6)(cid:25)7 5$(cid:31)8(cid:14)(cid:9)(cid:2)(cid:10)%(cid:2)1(cid:7)(cid:15) 5 ( 1(cid:7)#(cid:8)(cid:11) (cid:14) (cid:4)(cid:20)9((cid:2))(cid:22)* 6,(cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2):(cid:14)(cid:7)(cid:17)(cid:11)# (cid:25) (cid:4)(cid:20);(cid:4) < (cid:30)(cid:20)(cid:30)(cid:4) (cid:6)(cid:10)(cid:16)!(cid:14)!(cid:2)1(cid:28)(cid:8)/(cid:28)(cid:17)(cid:14)(cid:2)(cid:13)(cid:11)(cid:7)(cid:8)/(cid:15)(cid:14) (cid:25)(cid:3) (cid:4)(cid:20);(cid:4) < (cid:30)(cid:20)(cid:4)(cid:4) (cid:22)#(cid:28)(cid:15)!(cid:10)%% (cid:25)(cid:30) (cid:4)(cid:20)(cid:4)(cid:4) < (cid:4)(cid:20)(cid:30)(cid:4) 6,(cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2)=(cid:7)!#(cid:11) " (cid:30)(cid:20);(cid:4) (cid:3)(cid:20)(cid:30)(cid:4) (cid:3)(cid:20)(cid:23)(cid:4) (cid:6)(cid:10)(cid:16)!(cid:14)!(cid:2)1(cid:28)(cid:8)/(cid:28)(cid:17)(cid:14)(cid:2)=(cid:7)!#(cid:11) "(cid:30) (cid:30)(cid:20)(cid:30)( (cid:30)(cid:20)(cid:3)( (cid:30)(cid:20)(cid:29)( 6,(cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2)4(cid:14)(cid:15)(cid:17)#(cid:11) (cid:21) (cid:30)(cid:20);(cid:4) (cid:3)(cid:20)(cid:4)(cid:4) (cid:3)(cid:20)(cid:3)( .(cid:10)(cid:10)#(cid:2)4(cid:14)(cid:15)(cid:17)#(cid:11) 4 (cid:4)(cid:20)(cid:30)(cid:4) (cid:4)(cid:20)(cid:3)(cid:4) (cid:4)(cid:20)(cid:23)9 4(cid:14)(cid:28)!(cid:2)(cid:13)(cid:11)(cid:7)(cid:8)/(cid:15)(cid:14) (cid:8) (cid:4)(cid:20)(cid:4); < (cid:4)(cid:20)(cid:3)9 4(cid:14)(cid:28)!(cid:2)=(cid:7)!#(cid:11) 8 (cid:4)(cid:20)(cid:30)( < (cid:4)(cid:20)(cid:23)(cid:4) (cid:30)(cid:22)(cid:12)(cid:5)(cid:11)(cid:31) (cid:30)(cid:20) (cid:21)(cid:7)(cid:31)(cid:14)(cid:15) (cid:7)(cid:10)(cid:15) (cid:2)(cid:21)(cid:2)(cid:28)(cid:15)!(cid:2)"(cid:30)(cid:2)!(cid:10)(cid:2)(cid:15)(cid:10)#(cid:2)(cid:7)(cid:15)(cid:8)(cid:16)$!(cid:14)(cid:2)(cid:31)(cid:10)(cid:16)!(cid:2)%(cid:16)(cid:28) (cid:11)(cid:2)(cid:10)(cid:9)(cid:2)(cid:12)(cid:9)(cid:10)#(cid:9)$ (cid:7)(cid:10)(cid:15) (cid:20)(cid:2)(cid:6)(cid:10)(cid:16)!(cid:2)%(cid:16)(cid:28) (cid:11)(cid:2)(cid:10)(cid:9)(cid:2)(cid:12)(cid:9)(cid:10)#(cid:9)$ (cid:7)(cid:10)(cid:15) (cid:2) (cid:11)(cid:28)(cid:16)(cid:16)(cid:2)(cid:15)(cid:10)#(cid:2)(cid:14)&(cid:8)(cid:14)(cid:14)!(cid:2)(cid:4)(cid:20)(cid:30)(cid:3)(cid:5)(cid:2)(cid:31)(cid:31)(cid:2)(cid:12)(cid:14)(cid:9)(cid:2) (cid:7)!(cid:14)(cid:20) (cid:3)(cid:20) (cid:21)(cid:7)(cid:31)(cid:14)(cid:15) (cid:7)(cid:10)(cid:15)(cid:7)(cid:15)(cid:17)(cid:2)(cid:28)(cid:15)!(cid:2)#(cid:10)(cid:16)(cid:14)(cid:9)(cid:28)(cid:15)(cid:8)(cid:7)(cid:15)(cid:17)(cid:2)(cid:12)(cid:14)(cid:9)(cid:2)(cid:25)(cid:22)(cid:6)"(cid:2)’(cid:30)(cid:23)(cid:20)((cid:6)(cid:20) )(cid:22)*+ )(cid:28) (cid:7)(cid:8)(cid:2)(cid:21)(cid:7)(cid:31)(cid:14)(cid:15) (cid:7)(cid:10)(cid:15)(cid:20)(cid:2)(cid:13)(cid:11)(cid:14)(cid:10)(cid:9)(cid:14)#(cid:7)(cid:8)(cid:28)(cid:16)(cid:16)(cid:18)(cid:2)(cid:14)&(cid:28)(cid:8)#(cid:2),(cid:28)(cid:16)$(cid:14)(cid:2) (cid:11)(cid:10)-(cid:15)(cid:2)-(cid:7)#(cid:11)(cid:10)$#(cid:2)#(cid:10)(cid:16)(cid:14)(cid:9)(cid:28)(cid:15)(cid:8)(cid:14) (cid:20) (cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:13)(cid:14)(cid:8)(cid:11)(cid:15)(cid:10)(cid:16)(cid:10)(cid:17)(cid:18)(cid:21)(cid:9)(cid:28)-(cid:7)(cid:15)(cid:17)*(cid:4)(cid:23)(cid:27)(cid:4)9(cid:30))  2005-2014 Microchip Technology Inc. DS20001942F-page 11

MCP9700/9700A and MCP9701/9701A (cid:30)(cid:22)(cid:12)(cid:5)(cid:31) .(cid:10)(cid:9)(cid:2)#(cid:11)(cid:14)(cid:2)(cid:31)(cid:10) #(cid:2)(cid:8)$(cid:9)(cid:9)(cid:14)(cid:15)#(cid:2)(cid:12)(cid:28)(cid:8)/(cid:28)(cid:17)(cid:14)(cid:2)!(cid:9)(cid:28)-(cid:7)(cid:15)(cid:17) 0(cid:2)(cid:12)(cid:16)(cid:14)(cid:28) (cid:14)(cid:2) (cid:14)(cid:14)(cid:2)#(cid:11)(cid:14)(cid:2)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:2)1(cid:28)(cid:8)/(cid:28)(cid:17)(cid:7)(cid:15)(cid:17)(cid:2)(cid:22)(cid:12)(cid:14)(cid:8)(cid:7)%(cid:7)(cid:8)(cid:28)#(cid:7)(cid:10)(cid:15)(cid:2)(cid:16)(cid:10)(cid:8)(cid:28)#(cid:14)!(cid:2)(cid:28)#(cid:2) (cid:11)##(cid:12)+22---(cid:20)(cid:31)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:20)(cid:8)(cid:10)(cid:31)2(cid:12)(cid:28)(cid:8)/(cid:28)(cid:17)(cid:7)(cid:15)(cid:17) DS20001942F-page 12  2005-2014 Microchip Technology Inc.

MCP9700/9700A and MCP9701/9701A (cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:6)(cid:11)(cid:12)(cid:13)(cid:14)(cid:8)(cid:15)(cid:16)(cid:6)(cid:10)(cid:10)(cid:8)(cid:17)(cid:18)(cid:12)(cid:10)(cid:13)(cid:19)(cid:5)(cid:8)(cid:20)(cid:21)(cid:6)(cid:19)(cid:11)(cid:13)(cid:11)(cid:12)(cid:22)(cid:21)(cid:8)(cid:23)(cid:20)(cid:20)(cid:24)(cid:8)(cid:25)(cid:15)(cid:17)(cid:20)(cid:3)! (cid:29) (cid:30)(cid:22)(cid:12)(cid:5)(cid:31) .(cid:10)(cid:9)(cid:2)#(cid:11)(cid:14)(cid:2)(cid:31)(cid:10) #(cid:2)(cid:8)$(cid:9)(cid:9)(cid:14)(cid:15)#(cid:2)(cid:12)(cid:28)(cid:8)/(cid:28)(cid:17)(cid:14)(cid:2)!(cid:9)(cid:28)-(cid:7)(cid:15)(cid:17) 0(cid:2)(cid:12)(cid:16)(cid:14)(cid:28) (cid:14)(cid:2) (cid:14)(cid:14)(cid:2)#(cid:11)(cid:14)(cid:2)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:2)1(cid:28)(cid:8)/(cid:28)(cid:17)(cid:7)(cid:15)(cid:17)(cid:2)(cid:22)(cid:12)(cid:14)(cid:8)(cid:7)%(cid:7)(cid:8)(cid:28)#(cid:7)(cid:10)(cid:15)(cid:2)(cid:16)(cid:10)(cid:8)(cid:28)#(cid:14)!(cid:2)(cid:28)#(cid:2) (cid:11)##(cid:12)+22---(cid:20)(cid:31)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:20)(cid:8)(cid:10)(cid:31)2(cid:12)(cid:28)(cid:8)/(cid:28)(cid:17)(cid:7)(cid:15)(cid:17) b N E E1 1 2 e e1 D c A A2 φ A1 L 3(cid:15)(cid:7)# (cid:6)(cid:19)44(cid:19)(cid:6)"(cid:13)"(cid:26)(cid:22) (cid:21)(cid:7)(cid:31)(cid:14)(cid:15) (cid:7)(cid:10)(cid:15)(cid:2)4(cid:7)(cid:31)(cid:7)# (cid:6)(cid:19)5 56(cid:6) (cid:6)(cid:25)7 5$(cid:31)8(cid:14)(cid:9)(cid:2)(cid:10)%(cid:2)1(cid:7)(cid:15) 5 (cid:29) 4(cid:14)(cid:28)!(cid:2)1(cid:7)#(cid:8)(cid:11) (cid:14) (cid:4)(cid:20)(cid:24)((cid:2))(cid:22)* 6$# (cid:7)!(cid:14)(cid:2)4(cid:14)(cid:28)!(cid:2)1(cid:7)#(cid:8)(cid:11) (cid:14)(cid:30) (cid:30)(cid:20)(cid:24)(cid:4)(cid:2))(cid:22)* 6,(cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2):(cid:14)(cid:7)(cid:17)(cid:11)# (cid:25) (cid:4)(cid:20);(cid:24) < (cid:30)(cid:20)(cid:30)(cid:3) (cid:6)(cid:10)(cid:16)!(cid:14)!(cid:2)1(cid:28)(cid:8)/(cid:28)(cid:17)(cid:14)(cid:2)(cid:13)(cid:11)(cid:7)(cid:8)/(cid:15)(cid:14) (cid:25)(cid:3) (cid:4)(cid:20)(cid:5)(cid:24) (cid:4)(cid:20)(cid:24)( (cid:30)(cid:20)(cid:4)(cid:3) (cid:22)#(cid:28)(cid:15)!(cid:10)%% (cid:25)(cid:30) (cid:4)(cid:20)(cid:4)(cid:30) < (cid:4)(cid:20)(cid:30)(cid:4) 6,(cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2)=(cid:7)!#(cid:11) " (cid:3)(cid:20)(cid:30)(cid:4) < (cid:3)(cid:20)9(cid:23) (cid:6)(cid:10)(cid:16)!(cid:14)!(cid:2)1(cid:28)(cid:8)/(cid:28)(cid:17)(cid:14)(cid:2)=(cid:7)!#(cid:11) "(cid:30) (cid:30)(cid:20)(cid:30)9 (cid:30)(cid:20)(cid:29)(cid:4) (cid:30)(cid:20)(cid:23)(cid:4) 6,(cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2)4(cid:14)(cid:15)(cid:17)#(cid:11) (cid:21) (cid:3)(cid:20)9(cid:5) (cid:3)(cid:20)(cid:24)(cid:4) (cid:29)(cid:20)(cid:4)( .(cid:10)(cid:10)#(cid:2)4(cid:14)(cid:15)(cid:17)#(cid:11) 4 (cid:4)(cid:20)(cid:30)(cid:29) (cid:4)(cid:20)((cid:4) (cid:4)(cid:20)9(cid:4) .(cid:10)(cid:10)#(cid:2)(cid:25)(cid:15)(cid:17)(cid:16)(cid:14) (cid:3) (cid:4)> < (cid:30)(cid:4)> 4(cid:14)(cid:28)!(cid:2)(cid:13)(cid:11)(cid:7)(cid:8)/(cid:15)(cid:14) (cid:8) (cid:4)(cid:20)(cid:4); < (cid:4)(cid:20)(cid:3)(cid:4) 4(cid:14)(cid:28)!(cid:2)=(cid:7)!#(cid:11) 8 (cid:4)(cid:20)(cid:29)(cid:4) < (cid:4)(cid:20)((cid:23) (cid:30)(cid:22)(cid:12)(cid:5)(cid:11)(cid:31) (cid:30)(cid:20) (cid:21)(cid:7)(cid:31)(cid:14)(cid:15) (cid:7)(cid:10)(cid:15) (cid:2)(cid:21)(cid:2)(cid:28)(cid:15)!(cid:2)"(cid:30)(cid:2)!(cid:10)(cid:2)(cid:15)(cid:10)#(cid:2)(cid:7)(cid:15)(cid:8)(cid:16)$!(cid:14)(cid:2)(cid:31)(cid:10)(cid:16)!(cid:2)%(cid:16)(cid:28) (cid:11)(cid:2)(cid:10)(cid:9)(cid:2)(cid:12)(cid:9)(cid:10)#(cid:9)$ (cid:7)(cid:10)(cid:15) (cid:20)(cid:2)(cid:6)(cid:10)(cid:16)!(cid:2)%(cid:16)(cid:28) (cid:11)(cid:2)(cid:10)(cid:9)(cid:2)(cid:12)(cid:9)(cid:10)#(cid:9)$ (cid:7)(cid:10)(cid:15) (cid:2) (cid:11)(cid:28)(cid:16)(cid:16)(cid:2)(cid:15)(cid:10)#(cid:2)(cid:14)&(cid:8)(cid:14)(cid:14)!(cid:2)(cid:4)(cid:20)(cid:3)((cid:2)(cid:31)(cid:31)(cid:2)(cid:12)(cid:14)(cid:9)(cid:2) (cid:7)!(cid:14)(cid:20) (cid:3)(cid:20) (cid:21)(cid:7)(cid:31)(cid:14)(cid:15) (cid:7)(cid:10)(cid:15)(cid:7)(cid:15)(cid:17)(cid:2)(cid:28)(cid:15)!(cid:2)#(cid:10)(cid:16)(cid:14)(cid:9)(cid:28)(cid:15)(cid:8)(cid:7)(cid:15)(cid:17)(cid:2)(cid:12)(cid:14)(cid:9)(cid:2)(cid:25)(cid:22)(cid:6)"(cid:2)’(cid:30)(cid:23)(cid:20)((cid:6)(cid:20) )(cid:22)*+ )(cid:28) (cid:7)(cid:8)(cid:2)(cid:21)(cid:7)(cid:31)(cid:14)(cid:15) (cid:7)(cid:10)(cid:15)(cid:20)(cid:2)(cid:13)(cid:11)(cid:14)(cid:10)(cid:9)(cid:14)#(cid:7)(cid:8)(cid:28)(cid:16)(cid:16)(cid:18)(cid:2)(cid:14)&(cid:28)(cid:8)#(cid:2),(cid:28)(cid:16)$(cid:14)(cid:2) (cid:11)(cid:10)-(cid:15)(cid:2)-(cid:7)#(cid:11)(cid:10)$#(cid:2)#(cid:10)(cid:16)(cid:14)(cid:9)(cid:28)(cid:15)(cid:8)(cid:14) (cid:20) (cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:13)(cid:14)(cid:8)(cid:11)(cid:15)(cid:10)(cid:16)(cid:10)(cid:17)(cid:18)(cid:21)(cid:9)(cid:28)-(cid:7)(cid:15)(cid:17)*(cid:4)(cid:23)(cid:27)(cid:30)(cid:4)(cid:23))  2005-2014 Microchip Technology Inc. DS20001942F-page 13

MCP9700/9700A and MCP9701/9701A Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging DS20001942F-page 14  2005-2014 Microchip Technology Inc.

MCP9700/9700A and MCP9701/9701A (cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:6)(cid:11)(cid:12)(cid:13)(cid:14)(cid:8)(cid:20)(cid:21)(cid:6)(cid:19)(cid:11)(cid:13)(cid:11)(cid:12)(cid:22)(cid:21)(cid:8)(cid:17)(cid:18)(cid:12)(cid:10)(cid:13)(cid:19)(cid:5)(cid:8)(cid:23)(cid:20)(cid:17)(cid:24)(cid:8)(cid:25)(cid:20)(cid:17)(cid:3)"!(cid:29) (cid:30)(cid:22)(cid:12)(cid:5)(cid:31) .(cid:10)(cid:9)(cid:2)#(cid:11)(cid:14)(cid:2)(cid:31)(cid:10) #(cid:2)(cid:8)$(cid:9)(cid:9)(cid:14)(cid:15)#(cid:2)(cid:12)(cid:28)(cid:8)/(cid:28)(cid:17)(cid:14)(cid:2)!(cid:9)(cid:28)-(cid:7)(cid:15)(cid:17) 0(cid:2)(cid:12)(cid:16)(cid:14)(cid:28) (cid:14)(cid:2) (cid:14)(cid:14)(cid:2)#(cid:11)(cid:14)(cid:2)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:2)1(cid:28)(cid:8)/(cid:28)(cid:17)(cid:7)(cid:15)(cid:17)(cid:2)(cid:22)(cid:12)(cid:14)(cid:8)(cid:7)%(cid:7)(cid:8)(cid:28)#(cid:7)(cid:10)(cid:15)(cid:2)(cid:16)(cid:10)(cid:8)(cid:28)#(cid:14)!(cid:2)(cid:28)#(cid:2) (cid:11)##(cid:12)+22---(cid:20)(cid:31)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:20)(cid:8)(cid:10)(cid:31)2(cid:12)(cid:28)(cid:8)/(cid:28)(cid:17)(cid:7)(cid:15)(cid:17) (cid:2) E A 1 N L 1 2 3 b e c D R 3(cid:15)(cid:7)# (cid:19)5*:"(cid:22) (cid:21)(cid:7)(cid:31)(cid:14)(cid:15) (cid:7)(cid:10)(cid:15)(cid:2)4(cid:7)(cid:31)(cid:7)# (cid:6)(cid:19)5 (cid:6)(cid:25)7 5$(cid:31)8(cid:14)(cid:9)(cid:2)(cid:10)%(cid:2)1(cid:7)(cid:15) 5 (cid:29) 1(cid:7)#(cid:8)(cid:11) (cid:14) (cid:20)(cid:4)((cid:4)(cid:2))(cid:22)* )(cid:10)##(cid:10)(cid:31)(cid:2)#(cid:10)(cid:2)1(cid:28)(cid:8)/(cid:28)(cid:17)(cid:14)(cid:2).(cid:16)(cid:28)# (cid:21) (cid:20)(cid:30)(cid:3)( (cid:20)(cid:30)9( 6,(cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2)=(cid:7)!#(cid:11) " (cid:20)(cid:30)(cid:5)( (cid:20)(cid:3)(cid:4)( 6,(cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2)4(cid:14)(cid:15)(cid:17)#(cid:11) (cid:25) (cid:20)(cid:30)(cid:5)(cid:4) (cid:20)(cid:3)(cid:30)(cid:4) (cid:6)(cid:10)(cid:16)!(cid:14)!(cid:2)1(cid:28)(cid:8)/(cid:28)(cid:17)(cid:14)(cid:2)(cid:26)(cid:28)!(cid:7)$ (cid:26) (cid:20)(cid:4);(cid:4) (cid:20)(cid:30)(cid:4)( (cid:13)(cid:7)(cid:12)(cid:2)#(cid:10)(cid:2)(cid:22)(cid:14)(cid:28)#(cid:7)(cid:15)(cid:17)(cid:2)1(cid:16)(cid:28)(cid:15)(cid:14) 4 (cid:20)((cid:4)(cid:4) < 4(cid:14)(cid:28)!(cid:2)(cid:13)(cid:11)(cid:7)(cid:8)/(cid:15)(cid:14) (cid:8) (cid:20)(cid:4)(cid:30)(cid:23) (cid:20)(cid:4)(cid:3)(cid:30) 4(cid:14)(cid:28)!(cid:2)=(cid:7)!#(cid:11) 8 (cid:20)(cid:4)(cid:30)(cid:23) (cid:20)(cid:4)(cid:3)(cid:3) (cid:30)(cid:22)(cid:12)(cid:5)(cid:11)(cid:31) (cid:30)(cid:20) (cid:21)(cid:7)(cid:31)(cid:14)(cid:15) (cid:7)(cid:10)(cid:15) (cid:2)(cid:25)(cid:2)(cid:28)(cid:15)!(cid:2)"(cid:2)!(cid:10)(cid:2)(cid:15)(cid:10)#(cid:2)(cid:7)(cid:15)(cid:8)(cid:16)$!(cid:14)(cid:2)(cid:31)(cid:10)(cid:16)!(cid:2)%(cid:16)(cid:28) (cid:11)(cid:2)(cid:10)(cid:9)(cid:2)(cid:12)(cid:9)(cid:10)#(cid:9)$ (cid:7)(cid:10)(cid:15) (cid:20)(cid:2)(cid:6)(cid:10)(cid:16)!(cid:2)%(cid:16)(cid:28) (cid:11)(cid:2)(cid:10)(cid:9)(cid:2)(cid:12)(cid:9)(cid:10)#(cid:9)$ (cid:7)(cid:10)(cid:15) (cid:2) (cid:11)(cid:28)(cid:16)(cid:16)(cid:2)(cid:15)(cid:10)#(cid:2)(cid:14)&(cid:8)(cid:14)(cid:14)!(cid:2)(cid:20)(cid:4)(cid:4)(?(cid:2)(cid:12)(cid:14)(cid:9)(cid:2) (cid:7)!(cid:14)(cid:20) (cid:3)(cid:20) (cid:21)(cid:7)(cid:31)(cid:14)(cid:15) (cid:7)(cid:10)(cid:15)(cid:7)(cid:15)(cid:17)(cid:2)(cid:28)(cid:15)!(cid:2)#(cid:10)(cid:16)(cid:14)(cid:9)(cid:28)(cid:15)(cid:8)(cid:7)(cid:15)(cid:17)(cid:2)(cid:12)(cid:14)(cid:9)(cid:2)(cid:25)(cid:22)(cid:6)"(cid:2)’(cid:30)(cid:23)(cid:20)((cid:6)(cid:20) )(cid:22)*+ )(cid:28) (cid:7)(cid:8)(cid:2)(cid:21)(cid:7)(cid:31)(cid:14)(cid:15) (cid:7)(cid:10)(cid:15)(cid:20)(cid:2)(cid:13)(cid:11)(cid:14)(cid:10)(cid:9)(cid:14)#(cid:7)(cid:8)(cid:28)(cid:16)(cid:16)(cid:18)(cid:2)(cid:14)&(cid:28)(cid:8)#(cid:2),(cid:28)(cid:16)$(cid:14)(cid:2) (cid:11)(cid:10)-(cid:15)(cid:2)-(cid:7)#(cid:11)(cid:10)$#(cid:2)#(cid:10)(cid:16)(cid:14)(cid:9)(cid:28)(cid:15)(cid:8)(cid:14) (cid:20) (cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:13)(cid:14)(cid:8)(cid:11)(cid:15)(cid:10)(cid:16)(cid:10)(cid:17)(cid:18)(cid:21)(cid:9)(cid:28)-(cid:7)(cid:15)(cid:17)*(cid:4)(cid:23)(cid:27)(cid:30)(cid:4)(cid:30))  2005-2014 Microchip Technology Inc. DS20001942F-page 15

MCP9700/9700A and MCP9701/9701A APPENDIX A: REVISION HISTORY Revision F (July 2014) The following is the list of modifications: 1. Updated the Package Type information. 2. Note 4 in the DC Electrical Characteristics table was added. 3. Updated the Temperature Range in the Product Identification System section. 4. Added maximum IDD specification for the High Temperature device. Revision E (April 2009) The following is the list of modifications: 1. Added High Temperature option throughout document. 2. Updated plots to reflect the high temperature performance. 3. Updated Package Outline drawings. 4. Updated Revision history. Revision D (October 2007) The following is the list of modifications: 1. Added the 3-lead SOT-23 devices to data sheet. 2. Replaced Figure 2-15. 3. Updated Package Outline Drawings. Revision C (June 2006) The following is the list of modifications: 1. Added the MCP9700A and MCP9701A devices to data sheet. 2. Added TO92 package for the MCP9700/ MCP9701. Revision B (October 2005) The following is the list of modifications: 1. Added Section3.0 “Pin Descriptions”. 2. Added the Linear Active Thermistor™ IC trademark. 3. Removed the 2nd order temperature equation and the temperature coeficient histogram. 4. Added a reference to AN1001 and correspond- ing verbiage. 5. Added Figure4-2 and corresponding verbiage. Revision A (November 2005) • Original Release of this Document. DS20001942F-page 16  2005-2014 Microchip Technology Inc.

MCP9700/9700A and MCP9701/9701A PRODUCT IDENTIFICATION SYSTEM To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office. PART NO. – X /XX Examples: a) MCP9700T-E/LT: Linear Active Thermistor™ Device Temperature Package IC, Tape and Reel, Range 5LD SC70 package. b) MCP9700-E/TO: Linear Active Thermistor IC, 3LD TO-92 package. Device: MCP9700T: Linear Active Thermistor™ IC, c) MCP9700T-E/TT: Linear Active Thermistor Tape and Reel, Pb free IC, Tape and Reel, MCP9700AT: Linear Active Thermistor™ IC, 3LD SOT-23 package. Tape and Reel, Pb free d) MCP9700T-H/LT: Linear Active Thermistor MCP9701T: Linear Active Thermistor™ IC, IC, Tape and Reel, Tape and Reel, Pb free High Temperature, MCP9701AT: Linear Active Thermistor™ IC, 5LD SC70 package. Tape and Reel, Pb free a) MCP9700AT-E/LT: Linear Active Thermistor IC, Tape and Reel, Temperature Range: E = -40C to +125C 5LD SC70 package. H = -40C to +150C (MCP9700, SOT23-3 and b) MCP9700AT-E/TO: Linear Active Thermistor SC70-5 only) IC, Tape and Reel, 3LD TO-92 package. c) MCP9700AT-E/TT: Linear Active Thermistor Package: LT = Plastic Small Outline Transistor, 5-lead IC, Tape and Reel, TO = Plastic Small Outline Transistor, 3-lead 3LD SOT-23 package. TT = Plastic Small Outline Transistor, 3-lead a) MCP9701T-E/LT: Linear Active Thermistor IC, Tape and Reel, 5LD SC70 package. b) MCP9701-E/TO: Linear Active Thermistor IC, 3LD TO-92 package. c) MCP9701T-E/TT: Linear Active Thermistor IC, Tape and Reel, 3LD SOT-23 package. a) MCP9701AT-E/LT: Linear Active Thermistor IC, Tape and Reel, 5LD SC70 package. b) MCP9701A-E/TO: Linear Active Thermistor IC, 3LD TO-92 package. c) MCP9701AT-E/TT: Linear Active Thermistor IC, Tape and Reel,  2005-2014 Microchip Technology Inc. DS21942F-page 17

MCP9700/9700A and MCP9701/9701A NOTES: DS20001942F-page 18  2005-2014 Microchip Technology Inc.

Note the following details of the code protection feature on Microchip devices: • Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device Trademarks applications and the like is provided only for your convenience The Microchip name and logo, the Microchip logo, dsPIC, and may be superseded by updates. It is your responsibility to FlashFlex, flexPWR, JukeBlox, KEELOQ, KEELOQ logo, Kleer, ensure that your application meets with your specifications. LANCheck, MediaLB, MOST, MOST logo, MPLAB, MICROCHIP MAKES NO REPRESENTATIONS OR OptoLyzer, PIC, PICSTART, PIC32 logo, RightTouch, SpyNIC, WARRANTIES OF ANY KIND WHETHER EXPRESS OR SST, SST Logo, SuperFlash and UNI/O are registered IMPLIED, WRITTEN OR ORAL, STATUTORY OR trademarks of Microchip Technology Incorporated in the OTHERWISE, RELATED TO THE INFORMATION, U.S.A. and other countries. INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR The Embedded Control Solutions Company and mTouch are FITNESS FOR PURPOSE. Microchip disclaims all liability registered trademarks of Microchip Technology Incorporated arising from this information and its use. Use of Microchip in the U.S.A. devices in life support and/or safety applications is entirely at Analog-for-the-Digital Age, BodyCom, chipKIT, chipKIT logo, the buyer’s risk, and the buyer agrees to defend, indemnify and CodeGuard, dsPICDEM, dsPICDEM.net, ECAN, In-Circuit hold harmless Microchip from any and all damages, claims, Serial Programming, ICSP, Inter-Chip Connectivity, KleerNet, suits, or expenses resulting from such use. No licenses are KleerNet logo, MiWi, MPASM, MPF, MPLAB Certified logo, conveyed, implicitly or otherwise, under any Microchip MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code intellectual property rights. Generation, PICDEM, PICDEM.net, PICkit, PICtail, RightTouch logo, REAL ICE, SQI, Serial Quad I/O, Total Endurance, TSHARC, USBCheck, VariSense, ViewSpan, WiperLock, Wireless DNA, and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries. GestIC is a registered trademarks of Microchip Technology Germany II GmbH & Co. KG, a subsidiary of Microchip Technology Inc., in other countries. All other trademarks mentioned herein are property of their respective companies. © 2005-2014, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. ISBN: 978-1-63276-402-7 QUALITY MANAGEMENT SYSTEM Microchip received ISO/TS-16949:2009 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and CERTIFIED BY DNV Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company’s quality system processes and procedures == ISO/TS 16949 == are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified.  2005-2014 Microchip Technology Inc. DS20001942F-page 19

Worldwide Sales and Service AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Corporate Office Asia Pacific Office India - Bangalore Austria - Wels 2355 West Chandler Blvd. Suites 3707-14, 37th Floor Tel: 91-80-3090-4444 Tel: 43-7242-2244-39 Chandler, AZ 85224-6199 Tower 6, The Gateway Fax: 91-80-3090-4123 Fax: 43-7242-2244-393 Tel: 480-792-7200 Harbour City, Kowloon India - New Delhi Denmark - Copenhagen Fax: 480-792-7277 Hong Kong Tel: 91-11-4160-8631 Tel: 45-4450-2828 Technical Support: Tel: 852-2943-5100 Fax: 91-11-4160-8632 Fax: 45-4485-2829 http://www.microchip.com/ support Fax: 852-2401-3431 India - Pune France - Paris Web Address: Australia - Sydney Tel: 91-20-3019-1500 Tel: 33-1-69-53-63-20 Tel: 61-2-9868-6733 Fax: 33-1-69-30-90-79 www.microchip.com Japan - Osaka Atlanta Fax: 61-2-9868-6755 Tel: 81-6-6152-7160 Germany - Dusseldorf Duluth, GA China - Beijing Fax: 81-6-6152-9310 Tel: 49-2129-3766400 TFealx: :6 67788-9-95577-9-1641545 TFealx: :8 866-1-100-8-8556298-7-2010004 JTealp: a8n1 --3 T-6o8k8y0o- 3770 GTeel:r m49a-n8y9 --6 M27u-n1i4c4h-0 China - Chengdu Fax: 49-89-627-144-44 Austin, TX Fax: 81-3-6880-3771 Tel: 512-257-3370 Tel: 86-28-8665-5511 Korea - Daegu Germany - Pforzheim Fax: 86-28-8665-7889 Tel: 49-7231-424750 Boston Tel: 82-53-744-4301 Westborough, MA China - Chongqing Fax: 82-53-744-4302 Italy - Milan Tel: 774-760-0087 Tel: 86-23-8980-9588 Korea - Seoul Tel: 39-0331-742611 Fax: 774-760-0088 Fax: 86-23-8980-9500 Tel: 82-2-554-7200 Fax: 39-0331-466781 Chicago China - Hangzhou Fax: 82-2-558-5932 or Italy - Venice Itasca, IL Tel: 86-571-8792-8115 82-2-558-5934 Tel: 39-049-7625286 Tel: 630-285-0071 Fax: 86-571-8792-8116 Malaysia - Kuala Lumpur Netherlands - Drunen Fax: 630-285-0075 China - Hong Kong SAR Tel: 60-3-6201-9857 Tel: 31-416-690399 Cleveland Tel: 852-2943-5100 Fax: 60-3-6201-9859 Fax: 31-416-690340 Independence, OH Fax: 852-2401-3431 Malaysia - Penang Poland - Warsaw Tel: 216-447-0464 China - Nanjing Tel: 60-4-227-8870 Tel: 48-22-3325737 Fax: 216-447-0643 Tel: 86-25-8473-2460 Fax: 60-4-227-4068 Spain - Madrid Dallas Fax: 86-25-8473-2470 Philippines - Manila Tel: 34-91-708-08-90 Addison, TX China - Qingdao Tel: 63-2-634-9065 Fax: 34-91-708-08-91 Tel: 972-818-7423 Tel: 86-532-8502-7355 Fax: 63-2-634-9069 Sweden - Stockholm Fax: 972-818-2924 Fax: 86-532-8502-7205 Singapore Tel: 46-8-5090-4654 Detroit Novi, MI China - Shanghai Tel: 65-6334-8870 UK - Wokingham Tel: 248-848-4000 Tel: 86-21-5407-5533 Fax: 65-6334-8850 Tel: 44-118-921-5800 Fax: 86-21-5407-5066 Taiwan - Hsin Chu Fax: 44-118-921-5820 Houston, TX China - Shenyang Tel: 886-3-5778-366 Tel: 281-894-5983 Tel: 86-24-2334-2829 Fax: 886-3-5770-955 Indianapolis Fax: 86-24-2334-2393 Noblesville, IN Taiwan - Kaohsiung China - Shenzhen Tel: 886-7-213-7830 Tel: 317-773-8323 Tel: 86-755-8864-2200 Fax: 317-773-5453 Taiwan - Taipei Fax: 86-755-8203-1760 Tel: 886-2-2508-8600 Los Angeles China - Wuhan Fax: 886-2-2508-0102 Mission Viejo, CA Tel: 86-27-5980-5300 Tel: 949-462-9523 Thailand - Bangkok Fax: 86-27-5980-5118 Fax: 949-462-9608 Tel: 66-2-694-1351 China - Xian Fax: 66-2-694-1350 New York, NY Tel: 86-29-8833-7252 Tel: 631-435-6000 Fax: 86-29-8833-7256 San Jose, CA Tel: 408-735-9110 China - Xiamen Tel: 86-592-2388138 Canada - Toronto Fax: 86-592-2388130 Tel: 905-673-0699 Fax: 905-673-6509 China - Zhuhai Tel: 86-756-3210040 03/25/14 Fax: 86-756-3210049 DS20001942F-page 20  2005-2014 Microchip Technology Inc.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: M icrochip: MCP9700T-E/TT MCP9701T-E/LT MCP9700A-E/TO MCP9700AT-E/LT MCP9700-E/TO MCP9701A-E/TO MCP9701-E/TO MCP9701AT-E/LT MCP9700T-E/LT MCP9701T-E/TT MCP9700T-H/LT MCP9700AT-E/TT MCP9701AT-E/TT