MC78M00, MC78M00A, NCV78M00 Series 500 mA Positive Voltage Regulators The MC78M00/MC78M00A Series positive voltage regulators are identical to the popular MC7800 Series devices, except that they are www.onsemi.com specified for only half the output current. Like the MC7800 devices, the MC78M00 three−terminal regulators are intended for local, MARKING DIAGRAMS on−card voltage regulation. Internal current limiting, thermal shutdown circuitry and safe−area compensation for the internal pass transistor combine to make these TO−220 devices remarkably rugged under most operating conditions. T SUFFIX MC Maximum output current, with adequate heatsinking is 500 mA. CASE 221AB 78MxxXXT AWLYWWG Heatsink surface Features connected to Pin 2. • 1 No External Components Required 2 • 3 Internal Thermal Overload Protection xx = Voltage Option • Internal Short Circuit Current Limiting XX = Appropriate Suffix Options • Output Transistor Safe−Area Compensation A = Assembly Location • MC78M00A High Accuracy (±2%) WL = Wafer Lot Y = Year Available for 5.0 V, 8.0 V, 12 V and 15 V WW= Work Week • G = Pb−Free Package NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 4 Qualified and PPAP Capable DPAK−3 xxxxxG • These are Pb−Free Devices DT SUFFIX ALYWW 1 2 CASE 369C 3 Input 1.0 k 1.0 k 210 Heatsink surface (shown as terminal 4 in case outline drawing) is connected to Pin 2. 6.7 V 16 k xxxxx = Device Type and Voltage Option Code 100 A = Assembly Location 300 1.0 k 200 L = Wafer Lot Y = Year 3.6 k 3.0 k WW = Work Week 6.4 pF 300 G = Pb−Free Package k 5.6 k 10 0.24 Pin 1.Input 13 2.Ground 3.Output 20 50 200 Output 5 40 pF 6 k 6.0 k ORDERING INFORMATION 2. See detailed ordering and shipping information in the package 2.0 k 3.9 k dimensions section on page 10−14 of this data sheet. DEVICE MARKING INFORMATION 6.0 2.8 k k GND See general marking information in the device marking section on page 10 of this data sheet. This device contains 28 active transistors. Figure 1. Representative Schematic Diagram © Semiconductor Components Industries, LLC, 2016 1 Publication Order Number: March, 2016 − Rev. 28 MC78M00/D

MC78M00, MC78M00A, NCV78M00 Series MAXIMUM RATINGS (TA = 25°C, unless otherwise noted) (Note 1) Rating Symbol Value Unit Input Voltage VI Vdc (5.0 V−18 V) 35 (20 V−24V) 40 Power Dissipation (Package Limitation) °C/W Plastic Package, T Suffix TA = 25°C PD Internally Limited Thermal Resistance, Junction-to-Air (cid:2) 70 JA Thermal Resistance, Junction-to-Case (cid:2) 5.0 JC Plastic Package, DT Suffix TA = 25°C PD Internally Limited Thermal Resistance, Junction-to-Air (cid:2) 92 JA Thermal Resistance, Junction-to-Case (cid:2) 5.0 JC Operating Junction Temperature Range TJ +150 °C Storage Temperature Range Tstg −65 to +150 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. This device series contains ESD protection and exceeds the following tests: Human Body Model 2000 V per MIL−STD−883, Method 3015. Machine Model Method 200 V. MC78M05C/AC/B/AB, NCV78M05AB/B ELECTRICAL CHARACTERISTICS (VI = 10 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5 W, unless otherwise noted) (Note 2) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO Vdc MC78M05B/MC78M05C/NCV78M05B 4.8 5.0 5.2 MC78M05AB/MC78M05AC/NCV78M05AB 4.9 5.0 5.1 Output Voltage Variation (7.0 Vdc ≤ VI ≤ 20 Vdc, 5.0 mA ≤ IO ≤ 350 mA) VO Vdc MC78M05B/MC78M05C/NCV78M05B 4.75 − 5.25 MC78M05AB/MC78M05AC/NCV78M05AB 4.80 − 5.20 Line Regulation (TJ = 25°C, 7.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) Regline − 3.0 50 mV Load Regulation Regload mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) − 20 100 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 50 Input Bias Current (TJ = 25°C) IIB − 3.2 6.0 mA Quiescent Current Change (cid:3)IIB mA (8.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) − − 0.8 (5.0 mA ≤ IO ≤ 350 mA) − − 0.5 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn − 40 − (cid:4)V Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 8.0 V ≤VI ≤ 18 V) 62 − − (IO = 300 mA, f = 120 Hz, 8.0 ≤ VI ≤ 18 V, TJ = 25°C) 62 80 − Dropout Voltage (TJ = 25°C) VI−VO − 2.0 − Vdc Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS − 350 − mA Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) (cid:3)VO/(cid:3)T − ±0.2 − mV/°C Peak Output Current (TJ = 25°C) IO − 700 − mA 2. Tlow= 0°C for MC78MxxAC, C = −40°C for MC78MxxAB, B, NCV78MxxAB, B Thigh = +125°C for MC78MxxAB, AC, B, C, NCV78MxxAB, B www.onsemi.com 2

MC78M00, MC78M00A, NCV78M00 Series MC78M06C/B ELECTRICAL CHARACTERISTICS (VI = 11 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted) (Note 3) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 5.75 6.0 6.25 Vdc Output Voltage Variation (8.0 Vdc ≤ VI ≤ 21 Vdc, 5.0 mA ≤ IO ≤ 350 mA) VO 5.7 − 6.3 Vdc Line Regulation (TJ = 25°C, 8.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) Regline − 5.0 50 mV Load Regulation Regload mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 Ma) − 20 120 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 60 Input Bias Current (TJ = 25°C) IIB − 3.2 6.0 mA Quiescent Current Change (cid:3)IIB mA (9.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) − − 0.8 (5.0 mA ≤ IO ≤ 350 mA) − − 0.5 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn − 45 − (cid:4)V Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 9.0 V ≤VI ≤ 19 V) 59 − − (IO = 300 mA, f = 120 Hz, 9.0 V ≤VI ≤ 19 V, TJ = 25°C) 59 80 − Dropout Voltage (TJ = 25°C) VI − VO − 2.0 − Vdc Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS − 350 − mA Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) (cid:3)VO/(cid:3)T − ±0.2 − mV/°C Peak Output Current (TJ = 25°C) IO − 700 − mA MC78M08C/AC/B/AB, NCV78M08B ELECTRICAL CHARACTERISTICS (VI = 14 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5 W, unless otherwise noted) (Note 3) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO Vdc MC78M08B/MC78M08C/NCV78M08B 7.70 8.0 8.30 MC78M08AB/MC78M08AC 7.84 8.0 8.16 Output Voltage Variation (10.5 Vdc ≤ VI ≤ 23 Vdc, 5.0 mA ≤ IO ≤ 350 mA) VO Vdc MC78M08B/MC78M08C/NCV78M08B 7.6 − 8.4 MC78M08AB/MC78M08AC 7.7 − 8.3 Line Regulation (TJ = 25°C, 10.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) Regline − 6.0 50 mV Load Regulation Regload mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) − 25 160 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 80 Input Bias Current (TJ = 25°C) IIB − 3.2 6.0 mA Quiescent Current Change (cid:3)IIB mA (10.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) − − 0.8 (5.0 mA ≤ IO ≤ 350 mA) − − 0.5 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn − 52 − (cid:4)V Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 11.5 V ≤VI ≤ 21.5 V) 56 − − (IO = 300 mA, f = 120 Hz, 11.5 V ≤VI ≤ 21.5 V, TJ = 25°C) 56 80 − Dropout Voltage (TJ = 25°C) VI−VO − 2.0 − Vdc Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS − 350 − mA Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) (cid:3)VO/(cid:3)T − ±0.2 − mV/°C Peak Output Current (TJ = 25°C) IO − 700 − mA 3. Tlow= 0°C for MC78MxxAC, C = −40°C for MC78MxxAB, B, NCV78MxxAB, B Thigh = +125°C for MC78MxxAB, AC, B, C, NCV78MxxAB, B www.onsemi.com 3

MC78M00, MC78M00A, NCV78M00 Series MC78M09C/B, NCV78M09B ELECTRICAL CHARACTERISTICS (VI = 15 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted) (Note 4) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 8.64 9.0 9.45 Vdc Output Voltage Variation (11.5 Vdc ≤ VI ≤ 23 Vdc, 5.0 mA ≤ IO ≤ 350 mA) VO 8.55 − 9.45 Vdc Line Regulation (TJ = 25°C, 11.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) Regline − 6.0 50 mV Load Regulation Regload mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) − 25 180 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 90 Input Bias Current (TJ = 25°C) IIB − 3.2 6.0 mA Quiescent Current Change (cid:3)IIB mA (11.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) − − 0.8 (5.0 mA ≤ IO ≤ 350 mA) − − 0.5 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn − 52 − (cid:4)V Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 12.5 V ≤VI ≤ 22.5 V) 56 − − (IO = 300 mA, f = 120 Hz, 12.5 V ≤VI ≤ 22.5 V, TJ = 25°C) 56 80 − Dropout Voltage (TJ = 25°C) VI−VO − 2.0 − Vdc Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS − 350 − mA Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) (cid:3)VO/(cid:3)T − ±0.2 − mV/°C Peak Output Current (TJ = 25°C) IO − 700 − mA MC78M12C/AC/B/AB, NCV78M12B ELECTRICAL CHARACTERISTICS (VI = 19 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5 W, unless otherwise noted) (Note 4) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO Vdc MC78M12B/MC78M12C/NCV78M12B 11.50 12 12.50 MC78M12AB/MC78M12AC 11.76 12 12.24 Output Voltage Variation (14.5 Vdc ≤ VI ≤ 27 Vdc, 5.0 mA ≤ IO ≤ 350 mA) VO Vdc MC78M12B/MC78M12C/NCV78M12B 11.4 − 12.6 MC78M12AB/MC78M12AC 11.5 − 12.5 Line Regulation (TJ = 25°C, 14.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA) Regline − 8.0 50 mV Load Regulation Regload mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) − 25 240 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 120 Input Bias Current (TJ = 25°C) IIB − 3.2 6.0 mA Quiescent Current Change (cid:3)IIB mA (14.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA) − − 0.8 (5.0 mA ≤ IO ≤ 350 mA) − − 0.5 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn − 75 − (cid:4)V Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 15 V ≤VI ≤ 25 V) 55 − − (IO = 300 mA, f = 120 Hz, 15 V ≤VI ≤ 25 V, TJ = 25°C) 55 80 − Dropout Voltage (TJ = 25°C) VI−VO − 2.0 − Vdc Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS − 350 − mA Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) (cid:3)VO/(cid:3)T − ±0.3 − mV/°C Peak Output Current (TJ = 25°C) IO − 700 − mA 4. Tlow= 0°C for MC78MxxAC, C = −40°C for MC78MxxAB, B, NCV78MxxAB, B Thigh = +125°C for MC78MxxAB, AC, B, C, NCV78MxxAB, B www.onsemi.com 4

MC78M00, MC78M00A, NCV78M00 Series MC78M15C/AC/B/AB, NCV78M15B ELECTRICAL CHARACTERISTICS (VI = 23 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5 W, unless otherwise noted) (Note 5) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO Vdc MC78M15B/MC78M15C/NCV78M15B 14.4 15 15.6 MC78M15AB/MC78M15AC 14.7 15 15.3 Output Voltage Variation (17.5 Vdc ≤ VI ≤ 30 Vdc, 5.0 mA ≤ IO ≤ 350 mA) VO Vdc MC78M15B/MC78M15C/NCV78M15B 14.25 − 15.75 MC78M15AB/MC78M15AC 14.40 − 15.60 Input Regulation (TJ = 25°C, 17.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA) Regline − 10 50 mV Load Regulation Regload mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) − 25 300 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 150 Input Bias Current (TJ = 25°C) IIB − 3.2 6.0 mA Quiescent Current Change (cid:3)IIB mA (17.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA) − − 0.8 (5.0 mA ≤ IO ≤ 350 mA) − − 0.5 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn − 90 − (cid:4)V Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 18.5 V ≤VI ≤ 28.5 V) 54 − − (IO = 300 mA, f = 120 Hz, 18.5 V ≤VI ≤ 28.5 V, TJ = 25°C) 54 70 − Dropout Voltage (TJ = 25°C) VI−VO − 2.0 − Vdc Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS − 350 − mA Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) (cid:3)VO/(cid:3)T − ±0.3 − mV/°C Peak Output Current (TJ = 25°C) IO − 700 − mA MC78M18C/B ELECTRICAL CHARACTERISTICS (VI = 27 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5 W, unless otherwise noted) (Note 5) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 17.3 18 18.7 Vdc Output Voltage Variation (21 Vdc ≤ VI ≤ 33 Vdc, 5.0 mA ≤ IO ≤ 350 mA) VO 17.1 − 18.9 Vdc Line Regulation (TJ = 25°C, 21 Vdc ≤ VI ≤ 33 Vdc, IO = 200 mA) Regline − 10 50 mV Load Regulation Regload mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) − 30 360 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 180 Input Bias Current (TJ = 25°C) IIB − 3.2 6.5 mA Quiescent Current Change (cid:3)IIB mA (21 Vdc ≤ VI ≤ 33 Vdc, IO = 200 mA) − − 0.8 (5.0 mA ≤ IO ≤ 350 mA) − − 0.5 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn − 100 − (cid:4)V Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 22 V ≤VI ≤ 32 V) 53 − − (IO = 300 mA, f = 120 Hz, 22 V ≤VI ≤ 32 V, TJ = 25°C) 53 70 − Dropout Voltage (TJ = 25°C) VI−VO − 2.0 − Vdc Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS − 350 − mA Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) (cid:3)VO/(cid:3)T − ±0.3 − mV/°C Peak Output Current (TJ = 25°C) IO − 700 − mA 5. Tlow= 0°C for MC78MxxAC, C = −40°C for MC78MxxAB, B, NCV78MxxAB, B Thigh = +125°C for MC78MxxAB, AC, B, C, NCV78MxxAB, B www.onsemi.com 5

MC78M00, MC78M00A, NCV78M00 Series MC78M20C/B ELECTRICAL CHARACTERISTICS (VI = 29 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted) (Note 6) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 19.2 20 20.8 Vdc Output Voltage Variation (23 Vdc ≤ VI ≤ 35 Vdc, 5.0 mA ≤ IO ≤ 350 mA) VO 19 − 21 Vdc Line Regulation (TJ = 25°C, 23 Vdc ≤ VI ≤ 35 Vdc, IO = 200 mA) Regline − 10 50 mV Load Regulation Regload mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) − 30 400 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 200 Input Bias Current (TJ = 25°C) IIB − 3.2 6.5 mA Quiescent Current Change (cid:3)IIB mA (23 Vdc ≤ VI ≤ 35 Vdc, IO = 200 mA) − − 0.8 (5.0 mA ≤ IO ≤ 350 mA) − − 0.5 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn − 110 − (cid:4)V Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 24 V ≤VI ≤ 34 V) 52 − − (IO = 300 mA, f = 120 Hz, 24 V ≤VI ≤ 34 V, TJ = 25°C) 52 70 − Dropout Voltage (TJ = 25°C) VI−VO − 2.0 − Vdc Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS − 350 − mA Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) (cid:3)VO/(cid:3)T − ±0.5 − mV/°C Peak Output Current (TJ = 25°C) IO − 700 − mA MC78M24C/B ELECTRICAL CHARACTERISTICS (VI = 33 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted) (Note 6) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 23 24 25 Vdc Output Voltage Variation (27 Vdc ≤ VI ≤ 38 Vdc, 5.0 mA ≤ IO ≤ 350 mA) VO 22.8 − 25.2 Vdc Line Regulation (TJ = 25°C, 27 Vdc ≤ VI ≤ 38 Vdc, IO = 200 mA) Regline − 10 50 mV Load Regulation Regload mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) − 30 480 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 240 Input Bias Current (TJ = 25°C) IIB − 3.2 7.0 mA Quiescent Current Change (cid:3)IIB mA (27 Vdc ≤ VI ≤ 38 Vdc, IO = 200 mA) − − 0.8 (5.0 mA ≤ IO ≤ 350 mA) − − 0.5 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn − 170 − (cid:4)V Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 28 V ≤VI ≤ 38 V) 50 − − (IO = 300 mA, f = 120 Hz, 28 V ≤VI ≤ 38 V, TJ = 25°C) 50 70 − Dropout Voltage (TJ = 25°C) VI−VO − 2.0 − Vdc Short Circuit Current Limit (TJ = 25°C) IOS − 350 − mA Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) (cid:3)VO/(cid:3)T − ±0.5 − mV/°C Peak Output Current (TJ = 25°C) IO − 700 − mA 6. Tlow= 0°C for MC78MxxAC, C = −40°C for MC78MxxAB, B Thigh = +125°C for MC78MxxAB, AC, B, C www.onsemi.com 6

MC78M00, MC78M00A, NCV78M00 Series DEFINITIONS Line Regulation − The change in output voltage for a Input Bias Current − That part of the input current that change in the input voltage. The measurement is made under is not delivered to the load. conditions of low dissipation or by using pulse techniques Output Noise Voltage − The rms AC voltage at the such that the average chip temperature is not significantly output, with constant load and no input ripple, measured affected. over a specified frequency range. Load Regulation − The change in output voltage for a Long Term Stability − Output voltage stability under change in load current at constant chip temperature. accelerated life test conditions with the maximum rated Maximum Power Dissipation − The maximum total voltage listed in the devices’ electrical characteristics and device dissipation for which the regulator will operate maximum power dissipation. within specifications. 100 Free Air PD(max) for TA = 50°C 2.4 N (W) NCE W) 90 VMeoruticnatelldy 2.0 PATIO RESISTA°AIR ( C/ 80 Minimum Î2.0 oÎz. CLoÎpperÎ1.6 ER DISSI , THERMAL θJAJUNCTION-TO- 567000 Size Pad ÎÎL ÎÎÎÎÎÎ001...482 MAXIMUM POW R R(cid:2)JA P, D 40 0 0 5.0 10 15 20 25 30 L, LENGTH OF COPPER (mm) Figure 2. DPAK Thermal Resistance and Maximum Power Dissipation versus P.C.B. Copper Length 10 Infinite Heat (cid:2)HS = 10°C/W Sink W) 5.0 ON ( 3.0 (cid:2)HS = 20°C/W ATI 2.0 SIP No Heat Sink S DI 1.0 R E W 0.5 O P , D 0.3 P 0.2 (cid:2)JC = 5°C/W PD(max) = 7.52 W 0.1 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (°C) Figure 3. Worst Case Power Dissipation versus Ambient Temperature (TO−220) www.onsemi.com 7

MC78M00, MC78M00A, NCV78M00 Series 1.0 2.5 0.9 V) ENT (A) 00..87 TJ = 25°C OLTAGE ( 2.0 IO = 500 mA , OUTPUT CURRIO 00000.....65432 TJ = 125°C , DROPOUT V-VO110...505 (cid:3)VO = 100 mV IIOO == 11000 m mAA 0.1 VI 0 0 0 5.0 10 15 20 25 30 35 40 0 25 50 75 100 125 150 VI - VO, DROPOUT VOLTAGE (V) TJ, JUNCTION TEMPERATURE (°C) Figure 4. Peak Output Current versus Figure 5. Dropout Voltage versus Dropout Voltage Junction Temperature 100 100 Iout = 500 mA B) B) d d N ( 80 N ( 80 O O TI TI C C E E EJ 60 Iout = 500 mA EJ RR, RIPPLE R 40 VVCTJoiOn u = t== = 2 10 550°. 0CV V RR, RIPPLE R 60 VVCfT =JoiOn u = 1t== 2= 2 100 550 °H. 0CVz V 40 20 30 1.0 10 100 1.0 k 10 k 100 k 1.0 M 10 M 100 M 0.01 0.1 0.5 1.0 10 f, FREQUENCY (Hz) IO, OUTPUT CURRENT (A) Figure 6. Ripple Rejection versus Frequency Figure 7. Ripple Rejection versus Output Current 4.0 5.0 TJ = 25°C A) 3.0 A) 4.0 TJ = 25°C m m T ( T ( EN EN 3.0 URR 2.0 TJ = 125°C URR C C S S 2.0 , BIAIB 1.0 TJT =J 1=2 255°°CC VIOO = = 0 5.5.0 A V , BIAIB 1.0 TJ = 125°C VI-VO = 5.0 V 0 0 0 5.0 10 15 20 25 30 35 40 0.01 0.1 0.5 1.0 10 VI, INPUT VOLTAGE (Vdc) IO, OUTPUT CURRENT (A) Figure 8. Bias Current versus Input Voltage Figure 9. Bias Current versus Output Current www.onsemi.com 8

MC78M00, MC78M00A, NCV78M00 Series APPLICATIONS INFORMATION Design Considerations regulator is connected to the power supply filter with long wire lengths, or if the output load capacitance is large. An The MC78M00/MC78M00A Series of fixed voltage input bypass capacitor should be selected to provide good regulators are designed with Thermal Overload Protection high frequency characteristics to insure stable operation that shuts down the circuit when subjected to an excessive under all load conditions. A 0.33 (cid:4)F or larger tantalum, power overload condition, Internal Short Circuit Protection mylar, or other capacitor having low internal impedance at that limits the maximum current the circuit will pass, and high frequencies should be chosen. The bypass capacitor Output Transistor Safe−Area Compensation that reduces the should be mounted with the shortest possible leads directly output short circuit current as the voltage across the pass across the regulator’s input terminals. Normally good transistor is increased. construction techniques should be used to minimize ground In many low current applications, compensation loops and lead resistance drops since the regulator has no capacitors are not required. However, it is recommended external sense lead. that the regulator input be bypassed with a capacitor if the Input MC78M05C VViOn-, V7.o0u tV ≥ t o2 .200 V V 0.33 (cid:4)F R Constant Output Current to MC78M05C Grounded Input IO Load 7 2 (cid:2) The MC78M00 regulators can also be used as a current source 0.33 (cid:4)F 6 0.1 (cid:4)F when connected as above. In order to minimize dissipation the MC78M05C is chosen in this application. Resistor R determines 3 + 10 k the current as follows: 1.0 k 4 MC1741 5.0 V IO = R + IIB IIB = 1.5 mA over line and load changes. The addition of an operational amplifier allows adjustment to higher For example, a 500 mA current source would require R to be a or intermediate values while retaining regulation characteristics. 10(cid:2)(cid:5), 10 W resistor and the output voltage compliance would be The minimum voltage obtainable with this arrangement is 2.0 V the input voltage less 7.0 V. greater than the regulator voltage. Figure 10. Current Regulator Figure 11. Adjustable Output Regulator MJ2955 or Equiv. MJ2955 or Equiv. Input RSC Input R MC78MXXC Output 2N6049 or Equiv. R MC78MXXC 1.0 (cid:4)F 1.0 (cid:4)F Output 1.0 (cid:4)F XX = 2 digits of type number indicating voltage. XX = 2 digits of type number indicating voltage. The MC78M00 series can be current boosted with a PNP The circuit of Figure 12 can be modified to provide supply protection transistor. The MJ2955 provides current to 5.0 A. Resistor R in against short circuits by adding a short circuit sense resistor, Rsc, conjunction with the VBE of the PNP determines when the pass and an additional PNP transistor. The current sensing PNP must be transistor begins conducting; this circuit is not short circuit able to handle the short circuit current of the three-terminal proof. Input-output differential voltage minimum is increased regulator .Therefore, a 4.0 A plastic power transistor is specified. by VBE of the pass transistor. Figure 12. Current Boost Regulator Figure 13. Current Boost with Short Circuit Protection www.onsemi.com 9

MC78M00, MC78M00A, NCV78M00 Series ORDERING INFORMATION Output Device Voltage Temperature Range Package Marking Shipping† MC78M05CDTG 5.0 V TJ = 0° to +125°C DPAK−3 78M05 75 Units / Rail (Pb−Free) MC78M05CDTT5G 5.0 V TJ = 0° to +125°C DPAK−3 78M05 2500 / Tape & Reel (Pb−Free) MC78M05CDTRKG 5.0 V TJ = 0° to +125°C DPAK−3 78M05 2500 / Tape & Reel (Pb−Free) MC78M05ACDTG 5.0 V TJ = 0° to +125°C DPAK−3 8M05D 75 Units / Rail (Pb−Free) MC78M05ACDTRKG 5.0 V TJ = 0° to +125°C DPAK−3 8M05D 2500 / Tape & Reel (Pb−Free) MC78M05CTG 5.0 V TJ = 0° to +125°C TO−220 78M05CT 50 Units / Rail (Pb−Free) MC78M05ACTG 5.0 V TJ = 0° to +125°C TO−220 78M05ACT 50 Units / Rail (Pb−Free) MC78M05ABDTG 5.0 V TJ = −40° to +125°C DPAK−3 8M05A 75 Units / Rail (Pb−Free) MC78M05ABDTRKG 5.0 V TJ = −40° to +125°C DPAK−3 8M05A 2500 / Tape & Reel (Pb−Free) NCV78M05ABDTRKG* 5.0 V TJ = −40° to +125°C DPAK−3 8M05A 2500 / Tape & Reel (Pb−Free) MC78M05ABTG 5.0 V TJ = −40° to +125°C TO−220 78M05ABT 50 Units / Rail (Pb−Free) MC78M05BDTG 5.0 V TJ = −40° to +125°C DPAK−3 8M05B 75 Units / Rail (Pb−Free) MC78M05BDTT5G 5.0 V TJ = −40° to +125°C DPAK−3 8M05B 2500 / Tape & Reel (Pb−Free) MC78M05BDTRKG 5.0 V TJ = −40° to +125°C DPAK−3 8M05B 2500 / Tape & Reel (Pb−Free) NCV78M05BDTRKG* 5.0 V TJ = −40° to +125°C DPAK−3 8M05B 2500 / Tape & Reel (Pb−Free) MC78M05BTG 5.0 V TJ = −40° to +125°C TO−220 78M05BT 50 Units / Rail (Pb−Free) NCV78M05BTG* 5.0 V TJ = −40° to +125°C TO−220 78M05BT 50 Units / Rail (Pb−Free) MC78M06CDTG 6.0 V TJ = 0° to +125°C DPAK−3 78M06 75 Units / Rail (Pb−Free) MC78M06CDTRKG 6.0 V TJ = 0° to +125°C DPAK−3 78M06 2500 / Tape & Reel (Pb−Free) MC78M06CTG 6.0 V TJ = 0° to +125°C TO−220 78M06CT 50 Units / Rail (Pb−Free) MC78M06BTG 6.0 V TJ = −40° to +125°C TO−220 78M06BT 50 Units / Rail (Pb−Free) MC78M06BDTRKG 6.0 V TJ = −40° to +125°C DPAK−3 8M06B 2500 / Tape & Reel (Pb−Free) MC78M08CDTG 8.0 V TJ = 0° to +125°C DPAK−3 78M08 75 Units / Rail (Pb−Free) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *NCV devices: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable. www.onsemi.com 10

MC78M00, MC78M00A, NCV78M00 Series ORDERING INFORMATION (continued) OOuuttppuutt DDeevviiccee VVoollttaaggee TTeemmppeerraattuurree RRaannggee PPaacckkaaggee MMaarrkkiinngg SShhiippppiinngg†† MC78M08CDTRKG 8.0 V TJ = 0° to +125°C DPAK−3 78M08 2500 Units / Tape & Reel (Pb−Free) MC78M08ACDTG 8.0 V TJ = 0° to +125°C DPAK−3 8M08D 75 Units / Rail (Pb−Free) MC78M08ACDTRKG 8.0 V TJ = 0° to +125°C DPAK−3 8M08D 2500 Units / Tape & Reel (Pb−Free) MC78M08CTG 8.0 V TJ = 0° to +125°C TO−220 78M08CT 50 Units / Rail (Pb−Free) MC78M08ACTG 8.0 V TJ = 0° to +125°C TO−220 78M08ACT 50 Units / Rail (Pb−Free) MC78M08ABDTG 8.0 V TJ = −40° to +125°C DPAK−3 8M08A 75 Units / Rail (Pb−Free) MC78M08ABDTRKG 8.0 V TJ = −40° to +125°C DPAK−3 8M08A 2500 Units / Tape & Reel (Pb−Free) MC78M08ABTG 8.0 V TJ = −40° to +125°C TO−220 78M08ABT 50 Units / Rail (Pb−Free) MC78M08BDTG 8.0 V TJ = −40° to +125°C DPAK−3 8M08B 75 Units / Rail (Pb−Free) MC78M08BDTRKG 8.0 V TJ = −40° to +125°C DPAK−3 8M08B 2500 Units / Tape & Reel (Pb−Free) NCV78M08BDTRKG* 8.0 V TJ = −40° to +125°C DPAK−3 8M08B 2500 Units / Tape & Reel (Pb−Free) MC78M08BTG 8.0 V TJ = −40° to +125°C TO−220 78M08BT 50 Units / Rail (Pb−Free) MC78M09CDTG 9.0 V TJ = 0° to +125°C DPAK−3 78M09 75 Units / Rail (Pb−Free) MC78M09CDTRKG 9.0 V TJ = 0° to +125°C DPAK−3 78M09 2500 Units / Tape & Reel (Pb−Free) MC78M09CTG 9.0 V TJ = 0° to +125°C TO−220 78M09CT 50 Units / Rail (Pb−Free) MC78M09BDTG 9.0 V TJ = −40° to +125°C DPAK−3 8M09B 75 Units / Rail (Pb−Free) MC78M09BDTRKG 9.0 V TJ = −40° to +125°C DPAK−3 8M09B 2500 Units / Tape & Reel (Pb−Free) NCV78M09BDTRKG* 9.0 V TJ = −40° to +125°C DPAK−3 8M09B 2500 Units / Tape & Reel (Pb−Free) MC78M12CDTG 12 V TJ = 0° to +125°C DPAK−3 78M12 75 Units / Rail (Pb−Free) MC78M12CDTT5G 12 V TJ = 0° to +125°C DPAK−3 78M12 2500 Units / Tape & Reel (Pb−Free) MC78M12CDTRKG 12 V TJ = 0° to +125°C DPAK−3 78M12 2500 Units / Tape & Reel (Pb−Free) MC78M12ACDTG 12 V TJ = 0° to +125°C DPAK−3 8M12D 75 Units / Rail (Pb−Free) MC78M12ACDTRKG 12 V TJ = 0° to +125°C DPAK−3 8M12D 2500 Units / Tape & Reel (Pb−Free) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *NCV devices: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable. www.onsemi.com 11

MC78M00, MC78M00A, NCV78M00 Series ORDERING INFORMATION (continued) OOuuttppuutt DDeevviiccee VVoollttaaggee TTeemmppeerraattuurree RRaannggee PPaacckkaaggee MMaarrkkiinngg SShhiippppiinngg†† MC78M12CTG 12 V TJ = 0° to +125°C TO−220 78M12CT 50 Units / Rail (Pb−Free) MC78M12ACTG 12 V TJ = 0° to +125°C TO−220 78M12ACT 50 Units / Rail (Pb−Free) MC78M12ABDTG 12 V TJ = −40° to +125°C DPAK−3 8M12A 75 Units / Rail (Pb−Free) MC78M12ABDTRKG 12 V TJ = −40° to +125°C DPAK−3 8M12A 2500 Units / Tape & Reel (Pb−Free) MC78M12ABTG 12 V TJ = −40° to +125°C TO−220 78M12ABT 50 Units / Rail (Pb−Free) MC78M12BDTG 12 V TJ = −40° to +125°C DPAK−3 8M12B 75 Units / Rail (Pb−Free) MC78M12BDTRKG 12 V TJ = −40° to +125°C DPAK−3 8M12B 2500 Units / Tape & Reel (Pb−Free) NCV78M12BDTRKG* 12 V TJ = −40° to +125°C DPAK−3 8M12B 2500 Units / Tape & Reel (Pb−Free) MC78M12BTG 12 V TJ = −40° to +125°C TO−220 78M12BT 50 Units / Rail (Pb−Free) MC78M15CDTG 15 V TJ = 0° to +125°C DPAK−3 78M15 75 Units / Rail (Pb−Free) MC78M15CDTT5G 15 V TJ = 0° to +125°C DPAK−3 78M15 2500 Units / Tape & Reel (Pb−Free) MC78M15CDTRKG 15 V TJ = 0° to +125°C DPAK−3 78M15 2500 Units / Tape & Reel (Pb−Free) MC78M15ACDTG 15 V TJ = 0° to +125°C DPAK−3 8M15D 75 Units / Rail (Pb−Free) MC78M15ACDTRKG 15 V TJ = 0° to +125°C DPAK−3 8M15D 2500 Units / Tape & Reel (Pb−Free) MC78M15CTG 15 V TJ = 0° to +125°C TO−220 78M15CT 50 Units / Rail (Pb−Free) MC78M15ACTG 15 V TJ = 0° to +125°C TO−220 78M15ACT 50 Units / Rail (Pb−Free) MC78M15ABDTG 15 V TJ = −40° to +125°C DPAK−3 8M15A 75 Units / Rail (Pb−Free) MC78M15ABDTRKG 15 V TJ = −40° to +125°C DPAK−3 8M15A 2500 Units / Tape & Reel (Pb−Free) MC78M15ABTG 15 V TJ = −40° to +125°C TO−220 78M15ABT 50 Units / Rail (Pb−Free) MC78M15BDTG 15 V TJ = −40° to +125°C DPAK−3 8M15B 75 Units / Rail (Pb−Free) NCV78M15BDTG* 15 V TJ = −40° to +125°C DPAK−3 8M15B 75 Units / Rail (Pb−Free) MC78M15BDTRKG 15 V TJ = −40° to +125°C DPAK−3 8M15B 2500 Units / Tape & Reel (Pb−Free) NCV78M15BDTRKG* 15 V TJ = −40° to +125°C DPAK−3 8M15B 2500 Units / Tape & Reel (Pb−Free) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *NCV devices: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable. www.onsemi.com 12

MC78M00, MC78M00A, NCV78M00 Series ORDERING INFORMATION (continued) OOuuttppuutt DDeevviiccee VVoollttaaggee TTeemmppeerraattuurree RRaannggee PPaacckkaaggee MMaarrkkiinngg SShhiippppiinngg†† MC78M15BTG 15 V TJ = −40° to +125°C TO−220 78M15BT 50 Units / Rail (Pb−Free) MC78M18CDTG 18 V TJ = 0° to +125°C DPAK−3 78M18 75 Units / Rail (Pb−Free) MC78M18CDTRKG 18 V TJ = 0° to +125°C DPAK−3 78M18 2500 Units / Tape & Reel (Pb−Free) MC78M18CTG 18 V TJ = 0° to +125°C TO−220 78M18CT 50 Units / Rail (Pb−Free) MC78M18BTG 18 V TJ = −40° to +125°C TO−220 78M18BT 50 Units / Rail (Pb−Free) MC78M20CTG 20 V TJ = 0° to +125°C TO−220 78M20CT 50 Units / Rail (Pb−Free) MC78M24CTG 24 V TJ = 0° to +125°C TO−220 78M24CT 50 Units / Rail (Pb−Free) MC78M24BTG 24 V TJ = −40° to +125°C TO−220 78M24BT 50 Units / Rail (Pb−Free) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *NCV devices: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable. www.onsemi.com 13

MC78M00, MC78M00A, NCV78M00 Series PACKAGE DIMENSIONS DPAK−3 DT SUFFIX CASE 369C ISSUE F NOTES: A 1.DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. E C 2.CONTROLLING DIMENSION: INCHES. A 3.THERMAL PAD CONTOUR OPTIONAL WITHIN DI- b3 B MENSIONS b3, L3 and Z. c2 4.DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL 4 NOT EXCEED 0.006 INCHES PER SIDE. L3 Z 5.DIMENSIONS D AND E ARE DETERMINED AT THE D DETAIL A H 6.DOAUTTUEMRSM OA SATN EDX BT RAERME EDSE OTEFR TMHIEN EPDLA ASTT DICA TBUOMDY. 1 2 3 PLANE H. 7.OPTIONAL MOLD FEATURE. L4 INCHES MILLIMETERS NOTE 7 b2 c BOTTOM VIEW DIM MIN MAX MIN MAX A 0.086 0.094 2.18 2.38 e SIDE VIEW A1 0.000 0.005 0.00 0.13 b b 0.025 0.035 0.63 0.89 0.005 (0.13) M C b2 0.028 0.045 0.72 1.14 TOP VIEW b3 0.180 0.215 4.57 5.46 c 0.018 0.024 0.46 0.61 c2 0.018 0.024 0.46 0.61 H Z Z D 0.235 0.245 5.97 6.22 E 0.250 0.265 6.35 6.73 e 0.090 BSC 2.29 BSC L2 GPLAAUNGEE C SPELAATNIENG HL 00..035750 00..047100 19..4400 101..4718 L1 0.114 REF 2.90 REF L2 0.020 BSC 0.51 BSC L A1 BOTTOM VIEW L3 0.035 0.050 0.89 1.27 L1 ALTERNATE L4 −−− 0.040 −−− 1.01 CONSTRUCTIONS Z 0.155 −−− 3.93 −−− DETAIL A ROTATED 90(cid:2) CW SOLDERING FOOTPRINT* 6.20 3.00 0.244 0.118 2.58 0.102 5.80 1.60 6.17 0.228 0.063 0.243 (cid:3) (cid:4) mm SCALE 3:1 inches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. www.onsemi.com 14

MC78M00, MC78M00A, NCV78M00 Series PACKAGE DIMENSIONS TO−220, SINGLE GAUGE CASE 221AB ISSUE A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. −T− SPELAATNIENG 23.. CDOIMNETNRSOIOLLNI NZG D DEFIMINEENSS IAO ZNO: INNEC WHEHSE.RE ALL BODY AND B F C LEAD IRREGULARITIES ARE ALLOWED. 4. PRODUCT SHIPPED PRIOR TO 2008 HAD DIMENSIONS T S S = 0.045 - 0.055 INCHES (1.143 - 1.397 MM) 4 INCHES MILLIMETERS DIM MIN MAX MIN MAX Q A A 0.570 0.620 14.48 15.75 B 0.380 0.405 9.66 10.28 C 0.160 0.190 4.07 4.82 1 2 3 U D 0.025 0.035 0.64 0.88 H F 0.142 0.147 3.61 3.73 G 0.095 0.105 2.42 2.66 K H 0.110 0.155 2.80 3.93 Z J 0.018 0.025 0.46 0.64 K 0.500 0.562 12.70 14.27 L 0.045 0.060 1.15 1.52 N 0.190 0.210 4.83 5.33 L R Q 0.100 0.120 2.54 3.04 V J R 0.080 0.110 2.04 2.79 S 0.020 0.024 0.508 0.61 G T 0.235 0.255 5.97 6.47 U 0.000 0.050 0.00 1.27 D V 0.045 --- 1.15 --- N Z --- 0.080 --- 2.04 ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free ON Semiconductor Website: www.onsemi.com Literature Distribution Center for ON Semiconductor USA/Canada 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Europe, Middle East and Africa Technical Support: Order Literature: http://www.onsemi.com/orderlit Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Phone: 421 33 790 2910 Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Japan Customer Focus Center For additional information, please contact your local Email: orderlit@onsemi.com Phone: 81−3−5817−1050 Sales Representative www.onsemi.com MC78M00/D 15