MC4558 Wide bandwidth dual bipolar operational amplifier − Datasheet production data Features ■ Internally compensated ■ Short-circuit protection N ■ Gain and phase match between amplifier DIP8 ■ Low power consumption (Plastic package) ■ Pin-to-pin compatible with MC1458/LM358 ■ Gain bandwidth (at 100 kHz): 5.5 MHz D Description SO-8 (Plastic micropackage) The MC4558 is a high performance monolithic dual operational amplifier. The circuit combines all of the outstanding features of the MC1458, and in addition possesses three times the unity gain bandwidth of P the industry standard. TSSOP8 (Thin shrink small outline package) Pin connections (top view) (cid:48)(cid:86)(cid:85)(cid:81)(cid:86)(cid:85)(cid:1)(cid:18) (cid:18) (cid:25) (cid:55)(cid:36)(cid:36)(cid:12) (cid:42)(cid:79)(cid:87)(cid:70)(cid:83)(cid:85)(cid:74)(cid:79)(cid:72)(cid:1)(cid:74)(cid:79)(cid:81)(cid:86)(cid:85)(cid:1)(cid:18) (cid:19) (cid:14) (cid:24) (cid:48)(cid:86)(cid:85)(cid:81)(cid:86)(cid:85)(cid:1)(cid:19) (cid:47)(cid:80)(cid:79)(cid:14)(cid:74)(cid:79)(cid:87)(cid:70)(cid:83)(cid:85)(cid:74)(cid:79)(cid:72)(cid:1)(cid:74)(cid:79)(cid:81)(cid:86)(cid:85)(cid:1)(cid:18) (cid:20) (cid:12) (cid:14) (cid:23) (cid:42)(cid:79)(cid:87)(cid:70)(cid:83)(cid:85)(cid:74)(cid:79)(cid:72)(cid:1)(cid:74)(cid:79)(cid:81)(cid:86)(cid:1)(cid:85)(cid:1)(cid:19) (cid:55) (cid:14) (cid:21) (cid:12) (cid:22) (cid:47)(cid:80)(cid:79)(cid:14)(cid:74)(cid:79)(cid:87)(cid:70)(cid:83)(cid:85)(cid:74)(cid:79)(cid:72)(cid:1)(cid:74)(cid:79)(cid:81)(cid:86)(cid:85)(cid:1)(cid:19) (cid:36)(cid:36) Table 1. Device summary Order codes Temperature range Package Packing Marking MC4558CN DIP8 Tube MC4558CN MC4558CD/CDT 0 °C to +70 °C SO-8 Tube or tape & reel 4558C MC4558CPT TSSOP8 Tape & reel MC4558ID/IDT -40 °C to +105 °C SO-8 Tube or tape & reel 4558I April 2012 Doc ID 2181 Rev 3 1/11 This is information on a product in full production. www.st.com 11

Absolute maximum ratings MC4558 1 Absolute maximum ratings T able 2. Key parameters and their absolute maximum ratings Symbol Parameter MC4558I MC4558C Unit V Supply voltage ±22 V CC V(1) Input voltage ±15 V i V (2) Differential input voltage ±30 V id P Power dissipation 680 mW tot Output short-circuit duration Infinite T Operating free-air temperature range -40 to +105 0 to +70 °C oper Thermal resistance junction-to-ambient: SO-8 125 R °C/W thja TSSOP8 120 DIP8 85 HBM: Human body model(3) 500 ESD MM: Machine model(4) 200 V CDM: Charged device model 1500 1. Input voltage is with respect to the midpoint between Vcc+ and Vcc-. Its value must never exceed 15 V or the magnitude of Vcc, whichever is less. 2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. 3. Human body model, 100 pF discharged through a 1.5 kΩ resistor into pin of device. 4. Machine model ESD, a 200 pF cap is charged to the specified voltage, then discharged directly into the IC with no external series resistor (internal resistor < 5 Ω), into pin of device. Table 3. Operating conditions Symbol Parameter Min. Max. Unit V Supply voltage ±2 ±20 V CC 2/11 Doc ID 2181 Rev 3

MC4558 Typical application schematic 2 Typical application schematic Figure 1. Schematic diagram (1/2MC4558) (cid:20)(cid:15)(cid:18)(cid:76)(cid:56) (cid:55)(cid:36)(cid:36) (cid:42)(cid:79)(cid:87)(cid:70)(cid:83)(cid:85)(cid:74)(cid:79)(cid:72)(cid:1)(cid:74)(cid:79)(cid:81)(cid:86)(cid:85) (cid:18)(cid:22)(cid:17)(cid:56) (cid:47)(cid:80)(cid:79)(cid:14)(cid:74)(cid:79)(cid:87)(cid:70)(cid:83)(cid:85)(cid:74)(cid:79)(cid:72)(cid:1)(cid:74)(cid:79)(cid:81)(cid:86)(cid:85) (cid:19)(cid:22)(cid:56) (cid:48)(cid:86)(cid:85)(cid:81)(cid:86)(cid:85) (cid:19)(cid:22)(cid:56) (cid:18)(cid:17)(cid:81)(cid:39) (cid:25)(cid:24)(cid:81)(cid:39) (cid:24)(cid:15)(cid:18)(cid:76)(cid:56) (cid:24)(cid:15)(cid:18)(cid:76)(cid:56) (cid:21)(cid:25)(cid:17)(cid:56) (cid:21)(cid:15)(cid:19)(cid:76)(cid:56) (cid:20)(cid:23)(cid:76)(cid:56) (cid:55)(cid:36)(cid:36) Doc ID 2181 Rev 3 3/11

Electrical characteristics MC4558 3 Electrical characteristics Table 4. Electrical characteristics for V = ±15 V, T = 25 °C (unless otherwise specified) CC amb Symbol Parameter Min. Typ. Max. Unit Input offset voltage (R ≤ 10kΩ) s V T = +25°C 1 5 mV io amb T . ≤ T ≤ T 6 min amb max. Input offset current I T = +25°C 20 100 nA io amb T . ≤ T ≤ T 200 min amb max. Input bias current I T = +25°C 50 400 nA ib amb T . ≤ T ≤ T 500 min amb max. Large signal voltage gain (R = 2kΩ, V = ±10V) L o A T = +25°C 50 200 V/mV vd amb T . ≤ T ≤ T 25 min amb max. Supply voltage rejection ratio (R ≤ 10kΩ) s SVR T = +25°C 77 90 dB amb T . ≤ T ≤ T 77 min amb max. Supply current, all amplifiers, no load I T = +25°C 2.3 4.5 mA CC amb T . ≤ T ≤ T 6 min amb max. Input common mode voltage range V T = +25°C ±12 V icm amb T . ≤ T ≤ T ±12 min amb max. Common-mode rejection ratio (R ≤ 10kΩ) s CMR T = +25°C 70 90 dB amb T . ≤ T ≤ T 70 min amb max. I Output short-circuit current 10 20 40 mA os Output voltage swing T = +25°C R = 10kΩ ±12 ±14 amb L V R = 2kΩ ±10 ±13 V o L T . ≤ T ≤ T R = 10kΩ ±12 min amb max. L R = 2kΩ ±10 L Slew rate SR V/µs V = ±10, R = 2kΩ, C = 100pF, T = 25°C, unity gain 1.5 2.2 i L L amb Rise time t µs r V = ±20mV, R = 2kΩ, C = 100pF, T = 25°C, unity gain 0.3 i L L amb Overshoot K % OV V = ±20mV, R = 2kΩ, C = 100pF, T = 25°C, unity gain 15 i L L amb R Input resistance 0.3 2 MΩ i C Input capacitance 1.4 pF i R Output resistance 75 Ω o B Unity gain bandwidth 2.8 MHz 4/11 Doc ID 2181 Rev 3

MC4558 Electrical characteristics Table 4. Electrical characteristics for V = ±15 V, T = 25 °C (unless otherwise specified) CC amb Symbol Parameter Min. Typ. Max. Unit Gain bandwidth product GBP MHz V = 10mV, R = 2kΩ, C = 100pF, f = 100kHz, T = 25°C 5.5 i L L amb Total harmonic distortion THD % f = 1kHz, A = 20dB, R = 2kΩ, V = 2V , C = 100pF, T = 25°C 0.008 v L o pp L amb e Equivalent input noise voltage (R = 100Ω, f = 1kHz) 12 ---n---V------ n S Hz V /V Channel separation 120 dB O1 O2 Doc ID 2181 Rev 3 5/11

Electrical characteristics MC4558 Figure 2. Transient response test circuit Figure 3. Positive output voltage swing vs. load resistance (cid:48)(cid:52)(cid:36)(cid:42)(cid:45)(cid:45)(cid:48)(cid:52)(cid:36)(cid:48)(cid:49)(cid:38) (cid:48)(cid:52)(cid:36)(cid:42)(cid:45)(cid:45)(cid:48)(cid:52)(cid:36)(cid:48)(cid:49)(cid:38) (cid:51)(cid:45) (cid:36)(cid:45) (cid:55) (cid:42) Figure 4. Open loop frequency response Figure 5. Negative output voltage swing vs. load resistance Figure 6. Phase margin vs. frequency Figure 7. Power bandwidth 6/11 Doc ID 2181 Rev 3

MC4558 Package mechanical data 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Figure 8. DIP8 package Plastic DIP-8 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 3.3 0.130 a1 0.7 0.028 B 1.39 1.65 0.055 0.065 B1 0.91 1.04 0.036 0.041 b 0.5 0.020 b1 0.38 0.5 0.015 0.020 D 9.8 0.386 E 8.8 0.346 e 2.54 0.100 e3 7.62 0.300 e4 7.62 0.300 F 7.1 0.280 I 4.8 0.189 L 3.3 0.130 Z 0.44 1.6 0.017 0.063 P001F Doc ID 2181 Rev 3 7/11

Package mechanical data MC4558 Figure 9. SO-8 package SO-8 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 1.35 1.75 0.053 0.069 A1 0.10 0.25 0.04 0.010 A2 1.10 1.65 0.043 0.065 B 0.33 0.51 0.013 0.020 C 0.19 0.25 0.007 0.010 D 4.80 5.00 0.189 0.197 E 3.80 4.00 0.150 0.157 e 1.27 0.050 H 5.80 6.20 0.228 0.244 h 0.25 0.50 0.010 0.020 L 0.40 1.27 0.016 0.050 k 8˚ (max.) ddd 0.1 0.04 0016023/C 8/11 Doc ID 2181 Rev 3

MC4558 Package mechanical data Figure 10. TSSOP8 package TSSOP8 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 1.2 0.047 A1 0.05 0.15 0.002 0.006 A2 0.80 1.00 1.05 0.031 0.039 0.041 b 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.008 D 2.90 3.00 3.10 0.114 0.118 0.122 E 6.20 6.40 6.60 0.244 0.252 0.260 E1 4.30 4.40 4.50 0.169 0.173 0.177 e 0.65 0.0256 K 0˚ 8˚ 0˚ 8˚ L 0.45 0.60 0.75 0.018 0.024 0.030 L1 1 0.039 0079397/D Doc ID 2181 Rev 3 9/11

Revision history MC4558 5 Revision history T able 5. Document revision history Date Revision Changes Oct-2001 1 Initial release. The following changes were made in this revision: – Table 3.: Operating conditions on page2 updated with Vcc min. and max. Oct-2005 2 – Addition of supplementary data in Table 2.: Key parameters and their absolute maximum ratings on page2 Minor grammatical and formatting changes throughout. – ESD MM changed from 500 V to 200 V in Table2: Key parameters and their absolute maximum ratings 13-Apr-2012 3 – Order codes MC4558IN and MC4558IPT removed from Table 1.: Device summary – Minor text and formatting changes throughout. 10/11 Doc ID 2181 Rev 3

MC4558 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2012 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 2181 Rev 3 11/11

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S TMicroelectronics: MC4558CD MC4558CN MC4558ID MC4558IDT MC4558IPT MC4558CPT MC4558CDT MC4558IN