图片仅供参考

详细数据请看参考数据手册

Datasheet下载
  • 型号: MC33269DTRKG
  • 制造商: ON Semiconductor
  • 库位|库存: xxxx|xxxx
  • 要求:
数量阶梯 香港交货 国内含税
+xxxx $xxxx ¥xxxx

查看当月历史价格

查看今年历史价格

MC33269DTRKG产品简介:

ICGOO电子元器件商城为您提供MC33269DTRKG由ON Semiconductor设计生产,在icgoo商城现货销售,并且可以通过原厂、代理商等渠道进行代购。 MC33269DTRKG价格参考。ON SemiconductorMC33269DTRKG封装/规格:PMIC - 稳压器 - 线性, Linear Voltage Regulator IC Positive Adjustable 1 Output 800mA DPAK。您可以下载MC33269DTRKG参考资料、Datasheet数据手册功能说明书,资料中有MC33269DTRKG 详细功能的应用电路图电压和使用方法及教程。

产品参数 图文手册 常见问题
参数 数值
产品目录

集成电路 (IC)半导体

描述

IC REG LDO ADJ 0.8A DPAK低压差稳压器 1.35-10V ADJ 800mA

产品分类

PMIC - 稳压器 - 线性

品牌

ON Semiconductor

产品手册

点击此处下载产品Datasheet

产品图片

rohs

符合RoHS无铅 / 符合限制有害物质指令(RoHS)规范要求

产品系列

电源管理 IC,低压差稳压器,ON Semiconductor MC33269DTRKG-

数据手册

点击此处下载产品Datasheet

产品型号

MC33269DTRKG

产品目录页面

点击此处下载产品Datasheet

产品种类

低压差稳压器

供应商器件封装

DPAK-3

其它名称

MC33269DTRKGOSDKR

包装

Digi-Reel®

参考电压

1.265 V

商标

ON Semiconductor

回动电压—最大值

1.25 V at 500 mA

安装类型

表面贴装

安装风格

SMD/SMT

封装

Reel

封装/外壳

TO-252-3,DPak(2 引线+接片),SC-63

封装/箱体

TO-252-3 (DPAK)

工作温度

-40°C ~ 125°C

工厂包装数量

2500

最大工作温度

+ 125 C

最大输入电压

20 V

最小工作温度

- 40 C

标准包装

1

电压-跌落(典型值)

1.1V @ 800mA

电压-输入

最高 20V

电压-输出

可调至 1.25V

电压调节准确度

1 %

电流-输出

800mA

电流-限制(最小值)

800mA

稳压器拓扑

正,可调式

稳压器数

1

系列

MC33269

线路调整率

0.3 %

负载调节

0.5 %

输出电压

1.35 V to 10 V

输出电流

800 mA

输出端数量

1 Output

输出类型

Adjustable

推荐商品

型号:SIP21106DR-12-E3

品牌:Vishay Siliconix

产品名称:集成电路(IC)

获取报价

型号:L78M09CV

品牌:STMicroelectronics

产品名称:集成电路(IC)

获取报价

型号:LP38693MP-ADJ/NOPB

品牌:Texas Instruments

产品名称:集成电路(IC)

获取报价

型号:MCP1703AT-3002E/CB

品牌:Microchip Technology

产品名称:集成电路(IC)

获取报价

型号:NCP562SQ33T1G

品牌:ON Semiconductor

产品名称:集成电路(IC)

获取报价

型号:ZLDO1117G33TA

品牌:Diodes Incorporated

产品名称:集成电路(IC)

获取报价

型号:LTC3025EDC-3#TRPBF

品牌:Linear Technology/Analog Devices

产品名称:集成电路(IC)

获取报价

型号:REG102GA-2.5/2K5G4

品牌:Texas Instruments

产品名称:集成电路(IC)

获取报价

样品试用

万种样品免费试用

去申请
MC33269DTRKG 相关产品

ZMR330F-7

品牌:Diodes Incorporated

价格:

LM78L05ACM/NOPB

品牌:Texas Instruments

价格:

TPS76930DBVR

品牌:Texas Instruments

价格:¥3.50-¥4.38

NCV662SQ27T1G

品牌:ON Semiconductor

价格:¥2.09-¥4.67

AP1117D33L-13

品牌:Diodes Incorporated

价格:¥询价-¥询价

LT3082EDD#PBF

品牌:Linear Technology/Analog Devices

价格:

TLV71328PDBVR

品牌:Texas Instruments

价格:¥0.55-¥1.59

LM78L15ACM

品牌:Texas Instruments

价格:

PDF Datasheet 数据手册内容提取

MC33269, NCV33269 800 mA, Adjustable Output, Low Dropout Voltage Regulator The MC33269/NCV33269 series are low dropout, medium current, fixed and adjustable, positive voltage regulators specifically designed http://onsemi.com for use in low input voltage applications. These devices offer the circuit designer an economical solution for precision voltage SO−8 regulation, while keeping power losses to a minimum. 8 D SUFFIX The regulator consists of a 1.0 V dropout composite PNP−NPN pass 1 CASE 751 transistor, current limiting, and thermal shutdown. GND/Adj 1 8 NC Features • 2 7 3.3 V, 3.5 V, 5.0 V, 12 V and Adjustable Versions Vout Vout 2.85 V version available as MC34268 3 6 • Space Saving DPAK, SO−8 and SOT−223 Power Packages Vin 4 5 NC • 1.0 V Dropout (Top View) • Output Current in Excess of 800 mA • Thermal Protection DPAK • DT SUFFIX Short Circuit Protection CASE 369C • Output Trimmed to 1.0% Tolerance 1 1 2 3 • 3 NCV Prefix for Automotive and Other Applications Requiring 1. GND/Adj Unique Site and Control Change Requirements; AEC−Q100 2. Vout (Top View) 3. Vin Qualified and PPAP Capable • These are Pb−Free Devices SOT−223 1 ST SUFFIX 1 2 3 3 CASE 318E (Top View) DEVICE TYPE/NOMINAL OUTPUT VOLTAGE Heatsink surface (shown as terminal 4 in case outline drawing) is connected to Pin 2. MC33269D Adj MC33269T−3.5 3.5 V NCV33269D* Adj MC33269D−5.0 5.0 V MC33269DT Adj MC33269DT−5.0 5.0 V NCV33269DTRK* Adj NCV33269DT−5.0* 5.0 V TO−220AB MC33269T Adj NCV33269DTRK−5.0* 5.0 V T SUFFIX MC33269D−3.3 3.3 V MC33269T−5.0 5.0 V CASE 221AB MC33269DT−3.3 3.3 V MC33269D−012 12 V 1. GND/Adj NCV33269DTRK−3.3* 3.3 V MC33269DT−012 12 V 2. Vout MC33269T−3.3 3.3 V NCV33269DTRK−012* 12 V 12 3. Vin 123 MC33269ST−3.3 3.3 V MC33269T−012 12 V 3 (Top View) *NCV Prefix for Automotive and Other Applications Requiring Unique Site and Heatsink surface (shown as terminal 4 in Control Change Requirements; AEC−Q100 Qualified and PPAP Capable. case outline drawing) is connected to Pin 2. ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 7 of this data sheet. DEVICE MARKING INFORMATION See general marking information in the device marking section on page 8 of this data sheet. © Semiconductor Components Industries, LLC, 2014 1 Publication Order Number: August, 2014 − Rev. 28 MC33269/D

MC33269, NCV33269 MAXIMUM RATINGS Rating Symbol Value Unit Power Supply Input Voltage Vin 20 V Power Dissipation Case 369C (DPAK) TA = 25°C PD Internally Limited W Thermal Resistance, Junction−to−Ambient (cid:2) 92 °C/W JA Thermal Resistance, Junction−to−Case (cid:2) 6.0 °C/W JC Case 751 (SO−8) TA = 25°C PD Internally Limited W Thermal Resistance, Junction−to−Ambient (cid:2) 160 °C/W JA Thermal Resistance, Junction−to−Case (cid:2) 25 °C/W JC Case 221A (TO−220) TA = 25°C PD Internally Limited W Thermal Resistance, Junction−to−Ambient (cid:2) 65 °C/W JA Thermal Resistance, Junction−to−Case (cid:2) 5.0 °C/W JC Case 318E (SOT−223) TA = 25°C PD Internally Limited W Thermal Resistance, Junction−to−Ambient (cid:2) 156 °C/W JA Thermal Resistance, Junction−to−Case (cid:2) 15 °C/W JC Operating Die Junction Temperature Range TJ −40 to +150 °C Operating Ambient Temperature Range MC33269 TA −40 to +125 °C NCV33269 −40 to +125 Storage Temperature Tstg −55 to +150 °C Electrostatic Discharge Sensitivity (ESD) Human Body Model (HBM) ESD 4000 V Machine Model (MM) 400 Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. ELECTRICAL CHARACTERISTICS (CO = 10 (cid:3)F, TA = 25°C, for min/max values TA = −40°C to +125°C, unless otherwise noted.) Characteristic Symbol Min Typ Max Unit Output Voltage (Iout = 10 mA, TA = 25°C) VO V 3.3 Suffix (VCC = 5.3 V) 3.27 3.3 3.33 3.5 Suffix (VCC = 5.5 V) 3.465 3.5 3.535 5.0 Suffix (VCC = 7.0 V) 4.95 5.0 5.05 12 Suffix (VCC = 14 V) 11.88 12 12.12 Output Voltage (Line, Load and Temperature) (Note 1) VO V (1.25 V ≤ Vin − Vout ≤ 15 V, Iout = 500 mA) (1.35 V ≤ Vin − Vout ≤ 10 V, Iout = 800 mA) 3.3 Suffix 3.23 3.3 3.37 3.5 Suffix 3.43 3.5 3.57 5.0 Suffix 4.90 5.0 5.10 12 Suffix 11.76 12 12.24 Reference Voltage for Adjustable Voltage Vref 1.235 1.25 1.265 V (Iout = 10 mA, Vin − Vout = 2.0 V, TA = 25°C) Reference Voltage (Line, Load and Temperature) (Note 1) for Adjustable Voltage Vref 1.225 1.25 1.275 V (1.25 V ≤ Vin − Vout ≤ 15 V, Iout = 500 mA) (1.35 V ≤ Vin − Vout ≤ 10 V, Iout = 800 mA) Line Regulation (Iout = 10 mA, Vin = [Vout + 1.5 V] to Vin = 20 V, TA = 25°C) Regline − − 0.3 % Load Regulation (Vin = Vout + 3.0 V, Iout = 10 mA to 800 mA, TA = 25°C) Regload − − 0.5 % Dropout Voltage (Iout = 500 mA) Vin−Vout − 1.0 1.25 V (Iout = 800 mA) − 1.1 1.35 Ripple Rejection (10 Vpp, 120 Hz Sinewave; Iout = 500 mA) RR 55 − − dB Current Limit (Vin − Vout = 10 V) ILimit 800 − − mA Quiescent Current (Fixed Output) (1.5 V ≤ Vout ≤ 3.5 V) IQ − 5.5 8.0 mA (5 V ≤ Vout ≤ 12 V) − − 20 Minimum Required Load Current Fixed Output Voltage ILoad − − 0 mA Adjustable Voltage 8.0 − − Adjustment Pin Current IAdj − − 120 (cid:3)A 1. The MC33269−12, Vin − Vout is limited to 8.0 V maximum, because of the 20 V maximum rating applied to Vin. http://onsemi.com 2

MC33269, NCV33269 Vin Vout Trim Links VAdj Gnd This device contains 38 active transistors. Figure 1. Internal Schematic http://onsemi.com 3

MC33269, NCV33269 1.5 N V) O POUT VOLTAGE ( 11..31 TA = 25°C TA = -40°C ΔV, OUTPUTOOLTAGE DEVIATI Cin = 10 (cid:3)F 1m0V0/Div RO 0.9 TA = 125°C V CO = 10 (cid:3)F Tantalum , Dut UTT VPirne l=o aVdO =+ 0 3.1.0 A V V-Vino 0.7 , OUTPOCURREN 0.5 A 0.5 I 0 A 0 200 400 600 800 1000 20 ms/DIV IO, OUTPUT LOAD CURRENT (mA) Figure 2. Dropout Voltage versus Figure 3. Transient Load Regulation Output Load Current V )FB % 1100 1.6 D ( OL IO = 800 mA 1.4 RESH1060 T (A) 1.2 H N UT T1020 RRE 1.0 TA = 25°C P U MC33269D-XX N C 0.8 OLTAGE I 980 OUTPUT 0.6 L = 25 mm Copper V 0.4 R 940 E OV 0.2 , V) O 900 0 B( -55 -25 0 25 50 75 100 125 0 2.0 4.0 6.0 8.0 10 12 14 16 F V TA, AMBIENT TEMPERATURE (°C) INPUT-OUTPUT VOLTAGE DIFFERENTIAL (V) Figure 4. Dropout Voltage Figure 5. MC33269−XX Output DC Current versus versus Temperature Input−Output Differential Voltage 70 70 B) VO = 3.3 V or 5.0 V B) d d O ( 60 O ( 60 ATI VO = 12 V ATI R R N N O 50 O 50 CTI CTI Vin = 8.0 V JE JE Vout = 5.0 V RE 40 Vin = VO + 3.0 V RE 40 IL = 800 mA PPLE TILA = = 8 2050° mCA PPLE CTAA d=j =2 52°2C (cid:3)F RI 30 RI 30 R, R, R R 20 20 0.1 1.0 10 100 0.1 1.0 10 100 f, FREQUENCY (kHz) f, FREQUENCY (kHz) Figure 6. MC33269 Ripple Rejection Figure 7. MC33269−ADJ Ripple Rejection versus Frequency versus Frequency http://onsemi.com 4

MC33269, NCV33269 170 3.2 NCE, W) 150 PD(max) for TA = 50°C 2.8 SISTA°R ( C/ 130 2.4 RE -AI 110 Graph represents symmetrical layout 2.0 L O ÏÏÏ ÏÏÏ A T HERM TION- 90 ÏL CÏ2.o0p opzeÏÏ.r ÏÏÏÏÏ 1.6 , TθJAJUNC 70 ÏÏLÏ ÏÏ3.0Ï mm 1.2 R 50 0.8 R(cid:2)JA 30 0.4 0 10 20 30 40 50 L, LENGTH OF COPPER (mm) Figure 8. SOP−8 Thermal Resistance and Maximum Power Dissipation versus P.C.B. Copper Length 100 2.4 Free Air PD(max) for TA = 50°C E, 90 Mounted 2.0 NC W) Vertically SISTA °R ( C/ 80 Ï2.0 ozÏ. CLopÏper 1.6 RE AI Minimum ÏÏÏ MAL -TO- 70 Size Pad LÏÏÏ 1.2 R N E O , THANCTI 60 ÏÏÏ 0.8 JU Rθ J 50 0.4 R(cid:2)JA 40 0 0 5.0 10 15 20 25 30 L, LENGTH OF COPPER (mm) Figure 9. DPAK Thermal Resistance and Maximum Power Dissipation versus P.C.B. Copper Length 280 Free Air PD(max) for TA = 50°C 2.50 N (W) ESISTANCE°R ( C/W) 220400 VMeoruticnatelldy Ï2.0 oÏz. CLoÏpperÏ01..8235 DISSIPATIO , THERMAL RJAUNCTION‐TO‐AI 112600 MSiizneim Puamd ÏÏL ÏÏÏÏÏÏ00..5603 XIMUM POWER θ J A R 80 0.42 M R(cid:2)JA P, D 40 0.35 0 5.0 10 15 20 25 30 L, LENGTH OF COPPER (mm) Figure 10. SOT−223 Thermal Resistance and Maximum Power Dissipation versus P.C.B. Copper Length http://onsemi.com 5

MC33269, NCV33269 APPLICATIONS INFORMATION Figures 11 through 15 are typical application circuits. The supply input filter with long wire lengths. This will reduce output current capability of the regulator is in excess of the circuit’s sensitivity to the input line impedance at high 800 mA, with a typical dropout voltage of less than 1.0 V. frequencies. A 0.33 (cid:3)F or larger tantalum, mylar, ceramic, Internal protective features include current and thermal or other capacitor having low internal impedance at high limiting. frequencies should be chosen. The bypass capacitor should * The MC33269 requires an external output capacitor for be mounted with shortest possible lead or track length stability. The capacitor should be at least 10 (cid:3)F with an directly across the regulator’s input terminals. Applications equivalent series resistance (ESR) of less than 10 (cid:4) but should be tested over all operating conditions to insure greater than 0.2 (cid:4) over the anticipated operating stability. temperature range. With economical electrolytic capacitors, Internal thermal limiting circuitry is provided to protect cold temperature operation can pose a problem. As the integrated circuit in the event that the maximum junction temperature decreases, the capacitance also decreases and temperature is exceeded. When activated, typically at the ESR increases, which could cause the circuit to oscillate. 170°C, the output is disabled. There is no hysteresis built Also capacitance and ESR of a solid tantalum capacitor is into the thermal limiting circuit. As a result, if the device is more stable over temperature. The use of a low ESR ceramic overheating, the output will appear to be oscillating. This capacitor placed within close proximity to the output of the feature is provided to prevent catastrophic failures from device could cause instability. accidental device overheating. It is not intended to be used ** An input bypass capacitor is recommended to improve as a substitute for proper heat−sinking. transient response or if the regulator is connected to the Vin Vout Vin Vout MC33269-XX MC33269 **Cin C10o *(cid:3)F **Cin Adj R1 Co* GND 10 (cid:3)F R2 An input capacitor is not necessary for stability, however CAdj*** it will improve the overall performance. Figure 11. Typical Fixed Output Application (cid:3) (cid:5) V (cid:3)(cid:2)(cid:3)1.25(cid:3)(cid:3) 1(cid:4)R2 (cid:3)(cid:4)(cid:3)I R2 out R1 Adj(cid:3) ***CAdj is optional, however it will improve the ripple rejection. Vin RS Iout The MC34269 develops a 1.25 V reference voltage between the MC33269 output and the adjust terminal. Resistor R1, operates with **Cin C10o *(cid:3)F constant current to flow through it and resistor R2. This current Adj should be set such that the Adjust Pin current causes negligible drop across resistor R2. The total current with minimum load I (cid:3)(cid:2)(cid:3)1.25 should be greater than 8.0 mA. out R S Figure 13. Current Regulator Figure 12. Typical Adjustable Output Application Vin Vout MC33269-XX **Cin Vin Vout MC33269 GND **Cin R1 Adj Co* 10 (cid:3)F R2 MC33269-XX **Cin C10o *(cid:3)F GND The Schottky diode in series with the ground leg of the upper regulator shifts its output voltage higher by the forward voltage drop of the diode. This will cause the lower device R2 sets the maximum output voltage. Each transistor to remain off until the input voltage is removed. reduces the output voltage when turned on. Figure 14. Battery Backed−Up Power Supply Figure 15. Digitally Controlled Voltage Regulator http://onsemi.com 6

MC33269, NCV33269 ORDERING INFORMATION Device Package Shipping Information† MC33269DG SO−8 98 Units / Rail (Pb−Free) MC33269DR2G SO−8 2500 Units / Tape & Reel (Pb−Free) MC33269DTG DPAK 75 Units / Rail (Pb−Free) MC33269DTRKG DPAK 2500 Units / Tape & Reel (Pb−Free) MC33269TG TO−220 50 Units / Rail (Pb−Free) MC33269D−3.3G SO−8 98 Units / Rail (Pb−Free) MC33269DR2−3.3G SO−8 2500 Units / Tape & Reel (Pb−Free) MC33269DT−3.3G DPAK 75 Units / Rail (Pb−Free) MC33269DTRK−3.3G DPAK 2500 Units / Tape & Reel (Pb−Free) MC33269ST−3.3T3G SOT−223 4000 Units / Tape & Reel (Pb−Free) MC33269T−3.3G TO−220 50 Units / Rail (Pb−Free) MC33269T−3.5G TO−220 50 Units / Rail (Pb−Free) MC33269D−5.0G SO−8 98 Units / Rail (Pb−Free) MC33269DR2−5.0G SO−8 2500 Units / Tape & Reel (Pb−Free) MC33269DT−5.0G DPAK 75 Units / Rail (Pb−Free) NCV33269DT−5.0G* DPAK 75 Units / Rail (Pb−Free) MC33269DTRK−5.0G DPAK 2500 Units / Tape & Reel (Pb−Free) MC33269T−5.0G TO−220 50 Units / Rail (Pb−Free) MC33269D−012G SO−8 98 Units / Rail (Pb−Free) MC33269DR2−012G SO−8 2500 Units / Tape & Reel (Pb−Free) MC33269DT−012G DPAK 75 Units / Rail (Pb−Free) MC33269DTRK−012G DPAK 2500 Units / Tape & Reel (Pb−Free) MC33269T−012G TO−220 50 Units / Rail (Pb−Free) NCV33269DR2G* SO−8 2500 Units / Tape & Reel (Pb−Free) NCV33269DTRKG* DPAK 2500 Units / Tape & Reel (Pb−Free) NCV33269DTRK3.3G* DPAK 2500 Units / Tape & Reel (Pb−Free) NCV33269DTRK5.0G* DPAK 2500 Units / Tape & Reel (Pb−Free) NCV33269DTRK−12G* DPAK 2500 Units / Tape & Reel (Pb−Free) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable. http://onsemi.com 7

MC33269, NCV33269 MARKING DIAGRAMS SO−8 D SUFFIX CASE 751 8 8 8 8 269AJ 69−12 269−3 269−5 ALYW ALYW ALYW ALYW (cid:2) (cid:2) (cid:2) (cid:2) 1 1 1 1 DPAK SOT−223 DT SUFFIX ST SUFFIX CASE 369C CASE 318E 269AJG 69−12G 269−3G 269−5G ALYWW ALYWW ALYWW ALYWW AYW 2693(cid:2) (cid:2) 2 2 2 2 1 3 1 3 1 3 1 3 1 2 3 TO−220AB T SUFFIX CASE 221A MC MC MC MC 33269T 33269T−12 33269T−33 33269T−5 AWLYWWG AWLYWWG AWLYWWG AWLYWWG 1 2 3 1 2 3 1 2 3 1 2 3 A = Assembly Location L, WL = Wafer Lot Y = Year W, WW = Work Week G = Pb−Free Package (cid:2) = Pb−Free Package (Note: Microdot may be in either location) http://onsemi.com 8

MC33269, NCV33269 PACKAGE DIMENSIONS SO−8 D SUFFIX CASE 751−07 ISSUE AK NOTES: −X− 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. A 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) 8 5 PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR B S 0.25 (0.010) M Y M PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL 1 IN EXCESS OF THE D DIMENSION AT −Y− 4 K 6. 7M5A1X−I0M1U TMH RMUA T7E51R−IA0L6 CAROEN DOIBTSIOONL.ETE. NEW STANDARD IS 751−07. G MILLIMETERS INCHES DIM MIN MAX MIN MAX A 4.80 5.00 0.189 0.197 C NX 45(cid:3) B 3.80 4.00 0.150 0.157 SEATING C 1.35 1.75 0.053 0.069 PLANE D 0.33 0.51 0.013 0.020 −Z− G 1.27 BSC 0.050 BSC H 0.10 0.25 0.004 0.010 0.10 (0.004) J 0.19 0.25 0.007 0.010 H D M J K 0.40 1.27 0.016 0.050 M 0 (cid:3) 8 (cid:3) 0 (cid:3) 8 (cid:3) N 0.25 0.50 0.010 0.020 0.25 (0.010)M Z Y S X S S 5.80 6.20 0.228 0.244 SOLDERING FOOTPRINT* 1.52 0.060 7.0 4.0 0.275 0.155 0.6 1.270 0.024 0.050 (cid:3) (cid:5) mm SCALE 6:1 inches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 9

MC33269, NCV33269 PACKAGE DIMENSIONS DPAK DT SUFFIX CASE 369C ISSUE D NOTES: C 1.DIMENSIONING AND TOLERANCING PER ASME A Y14.5M, 1994. E A 2.CONTROLLING DIMENSION: INCHES. 3.THERMAL PAD CONTOUR OPTIONAL WITHIN DI- MENSIONS b3, L3 and Z. b3 B c2 4.DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.006 INCHES PER SIDE. L3 4 D Z 5.DOIUMTEENRSMIOONSST DE XATNRDE ME EASR EO FD ETTHEER PMLIANSETDIC A TB OTHDEY. H 6.DATUMS A AND B ARE DETERMINED AT DATUM 1 2 3 DETAIL A PLANE H. INCHES MILLIMETERS DIM MIN MAX MIN MAX L4 A 0.086 0.094 2.18 2.38 b2 A1 0.000 0.005 0.00 0.13 b c b 0.025 0.035 0.63 0.89 b2 0.030 0.045 0.76 1.14 e 0.005 (0.13) M C H b3 0.180 0.215 4.57 5.46 c 0.018 0.024 0.46 0.61 L2 GPLAAUNGEE C SPELAATNIENG cD2 00..203158 00..204254 50..9476 60..2621 E 0.250 0.265 6.35 6.73 e 0.090 BSC 2.29 BSC H 0.370 0.410 9.40 10.41 L A1 L 0.055 0.070 1.40 1.78 L1 L1 0.108 REF 2.74 REF L2 0.020 BSC 0.51 BSC DETAIL A L3 0.035 0.050 0.89 1.27 ROTATED 90(cid:2) CW L4 −−− 0.040 −−− 1.01 Z 0.155 −−− 3.93 −−− SOLDERING FOOTPRINT* 6.20 3.00 0.244 0.118 2.58 0.102 5.80 1.60 6.17 0.228 0.063 0.243 (cid:3) (cid:5) mm SCALE 3:1 inches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 10

MC33269, NCV33269 PACKAGE DIMENSIONS SOT−223 ST SUFFIX CASE 318E−04 ISSUE N D NOTES: b1 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. MILLIMETERS INCHES DIM MIN NOM MAX MIN NOM MAX 4 A 1.50 1.63 1.75 0.060 0.064 0.068 HE E A1 0.02 0.06 0.10 0.001 0.002 0.004 1 2 3 b 0.60 0.75 0.89 0.024 0.030 0.035 b1 2.90 3.06 3.20 0.115 0.121 0.126 c 0.24 0.29 0.35 0.009 0.012 0.014 D 6.30 6.50 6.70 0.249 0.256 0.263 b E 3.30 3.50 3.70 0.130 0.138 0.145 e 2.20 2.30 2.40 0.087 0.091 0.094 e1 e1 0.85 0.94 1.05 0.033 0.037 0.041 e L 0.20 −−− −−− 0.008 −−− −−− L1 1.50 1.75 2.00 0.060 0.069 0.078 (cid:2) C H(cid:2)E 60.7°0 7.−00 71.03°0 0.206°4 0.2−76 01.208°7 A 0.08 (0003) A1 L L1 SOLDERING FOOTPRINT* 3.8 0.15 2.0 0.079 6.3 2.3 2.3 0.248 0.091 0.091 2.0 0.079 (cid:3) (cid:5) 1.5 SCALE 6:1 mm inches 0.059 *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 11

MC33269, NCV33269 PACKAGE DIMENSIONS TO−220, SINGLE GAUGE T SUFFIX CASE 221AB ISSUE A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. −T− SPELAATNIENG 23.. CDOIMNETNRSOIOLLNI NZG D DEFIMINEENSS IAO ZNO: INNEC WHEHSE.RE ALL BODY AND B F C LEAD IRREGULARITIES ARE ALLOWED. 4. PRODUCT SHIPPED PRIOR TO 2008 HAD DIMENSIONS T S S = 0.045 - 0.055 INCHES (1.143 - 1.397 MM) 4 INCHES MILLIMETERS DIM MIN MAX MIN MAX Q A A 0.570 0.620 14.48 15.75 B 0.380 0.405 9.66 10.28 C 0.160 0.190 4.07 4.82 1 2 3 U D 0.025 0.035 0.64 0.88 H F 0.142 0.147 3.61 3.73 G 0.095 0.105 2.42 2.66 K H 0.110 0.155 2.80 3.93 Z J 0.018 0.025 0.46 0.64 K 0.500 0.562 12.70 14.27 L 0.045 0.060 1.15 1.52 N 0.190 0.210 4.83 5.33 L R Q 0.100 0.120 2.54 3.04 V J R 0.080 0.110 2.04 2.79 S 0.020 0.024 0.508 0.61 G T 0.235 0.255 5.97 6.47 U 0.000 0.050 0.00 1.27 D V 0.045 --- 1.15 --- N Z --- 0.080 --- 2.04 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free ON Semiconductor Website: www.onsemi.com Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 5163, Denver, Colorado 80217 USA Europe, Middle East and Africa Technical Support: Order Literature: http://www.onsemi.com/orderlit Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Phone: 421 33 790 2910 Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Japan Customer Focus Center For additional information, please contact your local Email: orderlit@onsemi.com Phone: 81−3−5817−1050 Sales Representative http://onsemi.com MC33269/D 12

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: O N Semiconductor: NCV33269DTRK NCV33269DTRK-012 NCV33269DTRK-12G NCV33269DTRK-3.3 NCV33269DTRK3.3G NCV33269DTRKG MC33269DR2G MC33269D MC33269D-012 MC33269D-012G MC33269D-3.3 MC33269D-3.3G MC33269D-5.0 MC33269D-5.0G MC33269DG MC33269DR2 MC33269DR2-012 MC33269DR2-012G MC33269DR2-3.3 MC33269DR2-3.3G MC33269DR2-5.0 MC33269DR2-5.0G MC33269DT MC33269DT-012 MC33269DT-012G MC33269DT-3.3 MC33269DT-3.3G MC33269DT-5.0 MC33269DT-5.0G MC33269DTG MC33269DTRK MC33269DTRK-012 MC33269DTRK-012G MC33269DTRK-3.3 MC33269DTRK-3.3G MC33269DTRK-5.0 MC33269DTRK-5.0G MC33269DTRKG MC33269ST-3.3T3 MC33269ST-3.3T3G MC33269T MC33269T-012 MC33269T-012G MC33269T-3.3 MC33269T-3.3G MC33269T-5.0 MC33269T-5.0G MC33269TG NCV33269DR2G NCV33269DT-5.0G NCV33269DTRK5.0G SCD33269T-5.0G MC33269T-3.5G