The MBC60 Series of open-frame medical power supplies, with its wide universal 90-264 VAC input range, is available at 60 W of output power and a variety of single and multiple output voltages. The MBC series was designed to 4th edition medical approvals and provides 2x MOPP (Means of Patient Protection) isolation for Class I and Class II installations. These medical power supplies are ideal for, monitoring, home health equipment as well as surgical devices. • 50 - 65 W Single to Triple Outputs • Ultra High Efficiency > 85% • Form Factor 4 x 2 x 1.2 inches (101.6 x 50.8 x 30.48 mm) • Low leakage current < 250 μA • No Load Power < 0.3 W • Approved to EN/IEC 60601-1 • 2x MOPP • IEC Protection Class Options: o Class I: Earth pin J4 (no suffix) o Class II: No Earth pin (-2 suffix) • Conducted EMI EN 55022-B, FCC Part 15 Level B • Medical Safety Agency Approvals • RoHS Compliant • Cover Kit Accessory Available • Dialysis • Surgical Devices • Monitoring • Home Health • Pumps • Ultrasound

MBC60 Series 2 OUTPUT VOLTAGE OUTPUT CURRENT MINIMUM TOTAL MODEL1 RIPPLE & NOISE 4 (VDC) 2 MAX (A) LOAD (A) 3 REGULATION MBC60-1005G 5.2 10.0 0.0 1.25% ± 0.8% MBC60-1012G 12 5.4 0.0 1% ± 0.8% MBC60-1015G 15 4.33 0.0 1% ± 0.8% MBC60-1024G 24 2.7 0.0 1% ± 0.8% MBC60-1048G 48 1.35 0.0 1% ± 0.8% 5.2 8.0 0.5 1.25% ± 0.8% MBC60-3000G 12.5 3.0 0.1 1% ± 5.3% -12.5 0.5 0.0 1% ± 5.3% 5.2 8.0 0.5 1.25% ± 0.8% MBC60-3001G 23.8 1.5 0.1 1% ± 5.3% -12.5 0.5 0.0 1% ± 5.3% 5.2 8.0 0.5 1.25% ± 0.8% MBC60-3002G 14.6 2.5 0.1 1% ± 5.3% -16.2 0.5 0.0 1% ± 5.3% 3.3 6.0 1.0 1.5% ± 0.8% MBC60-3003G 5.2 3.0 0.1 1% ± 5.3% -12.8 0.5 0.0 1% ± 5.3% Cover-60-XCB5 Metal cover kit accessory Specifications are for nominal input voltage, 25°C unless otherwise stated. PARAMETER DESCRIPTION / CONDITION SPECIFICATION Input Voltage Universal 90 - 264 VAC Input Frequency6 47 to 400 Hz 120 VAC: 1.5 A max. Input Current 230 VAC: 0.75 A max. Single output models < 0.3 W No Load Power Multi output models < 0.5 W 120 VAC: 30 A max. Inrush Current 230 VAC: 60 A max. 120 VAC: < 140 µA Leakage Current 230 VAC: <250 µA Switching Frequency Typical 67 67 kHz 1 Single output models deliver 65 W, except MBC60-1005G (50 W). Triple output models deliver 60 W, except MBC60-3003G (45 W). 2 Maximum outputs for each output. Max power rating should not be exceeded 3 Minimum load specified to meet cross regulation. 4 Ripple is peak to peak with 20 MHz bandwidth and 10 µF (Tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. 5 When used in Cover Kit, de-rate output power to 70 % under all operating conditions. 6 Safety Approved: 47 to 63 Hz tech.support@psbel.com

MBC60 Series 3 PARAMETER DESCRIPTION / CONDITION SPECIFICATION Efficiency7 Typical 85% Hold Up Time @ 120 VAC typical >10 ms Output Power Derate output power linearly to 80% from 90 to 80 VAC input. 50 - 65 W Line Regulation +/-0.3% V1: +/-0.5% Load Regulation V2 & V3: +/-5% < 10%, Transient Response 50% to 100% load change, 50/60 Hz, 50% duty cycle, 0.1 A/µs recovery time < 5 ms Rise Time < 100 ms V1: ± 3% Set Point Tolerance V2 & V3: ± 5% Output Voltage Adjustment V1 ± 10% Over Current Protection Typical above rating 130% Over Voltage Protection Typical for V1 only 130% Short Circuit Protection Short term, autorecovery PARAMETER DESCRIPTION / CONDITION SPECIFICATION Refer to derating curve, Fig. 1 -20 to 70°C Operating Temperature Start-up is guaranteed -20 to 0°C Storage Temperature -40 to +85°C Relative Humidity Non Condensing 95% Operating: 10,000 ft. Altitude Non-Operating: 40,000 ft. Reliability MTBF according to Telcordia -SR332-Issue 3 1.87 million hours Cooling Convection Figure 1. Derating Curve De-rate linearly from 100% at 50°C to 50% at 70°C 7 For MBC60-3003G efficiency is 75% typical. Asia-Pacific Europe, Middle East North America +86 755 298 85888 +353 61 225 977 +1 408 785 5200 © 2019 Bel Power Solutions & Protection BCD.00287_AE1

MBC60 Series 4 Conducted Emissions EN 55011-B, CISPR22-B, FCC PART15-B Pass Radiated Emissions EN 55011 Pass Input Current Harmonics EN 61000-3-2 Class D Voltage Fluctuation and Flicker EN 61000-3-3 Pass ESD Immunity EN 61000-4-2 Level 4, Criterion A Radiated Field Immunity EN 61000-4-3 Level 3, Criterion A Electrical Fast Transient Immunity EN 61000-4-4 Level 3, Criterion A Surge Immunity EN 61000-4-5 Level 3, Criterion A Conducted Immunity EN 61000-4-6 Level 3, Criterion A Magnetic Field Immunity EN 61000-4-8 Level 4, Criterion A Voltage Dips, Interruptions EN 61000-4-11 Criterion A & B PARAMETER DESCRIPTION / CONDITION SPECIFICATION Input to Output, 2M0PP Min. 5700 VDC Isolation Voltage Input to Ground, 1M0PP 1500 VAC Output to Ground 500 VAC Approved to the latest edition of the following standards: Safety Standards CSA/UL60601-1, EN60601-1 and IEC60601-1. Agency Approvals Nemko, UL, C-UL CE mark Complies with LVD Directive CONNECTOR PIN DESCRIPTION / CONDITION MANUFACTURER / PN Pin 1 AC Line Molex: 26-60-4030 or equivalent AC Input Connector J1 Pin 2 AC Neutral Mating: 09-50-3031; Pins: 08-50-0106 Pin 1,2 V1 Pin 3,4 RTN Tyco: 640445-6 or equivalent DC Output Connector J2 Pin 5 V3 Mating: 647402-6; Pins: 3-647409-1 Pin 6 V2 Pin 1 +V1 Sense Molex: 22-23-2021 or equivalent Signal Connector J3 Pin 2 -V1 Sense Mating: 22-01-2021 Molex: 19705-4301 Earth J4 Mating: 190030001 PARAMETER DESCRIPTION / CONDITION Weight 150 g (0.33 lbs.) Dimensions 101.6 x 50.8 x 30.48 mm (4 x 2 x 1.2 inch) tech.support@psbel.com

MBC60 Series 5 Figure 2. Mechanical Drawing MBC60-1xxxG Figure 3. Mechanical Drawing MBC60-3xxxG NOTES: In case the PCB is mounted in a metal enclosure, using metal hardware ensure the following: 1 Stand off, used to mount PCB has OD of 5.4 mm max. 2 Screws, used to fix PCB on stand off, have head dia of 6.0 mm max. 3 Washer, if used, to have dia of 6.5 mm max. NUCLEAR AND MEDICAL APPLICATIONS - Products are not designed or intended for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. Asia-Pacific Europe, Middle East North America +86 755 298 85888 +353 61 225 977 +1 408 785 5200 © 2019 Bel Power Solutions & Protection BCD.00287_AE1

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: B el Power Solutions: MBC60-1024G MBC60-3002G MBC60-1005G MBC60-3000G MBC60-3001G MBC60-1012G MBC60-3003G MBC60-1048G MBC60-1015G