The MBC150 Series of open-frame medical power supplies, with its wide universal input range 90-264 VAC, is available at 150 W of output power with forced-air cooling and a variety of single output voltages. The MBC series is designed and approved to the latest Medical standards (EN/IEC 60601-1), providing 2 x MOPP (Means of Patient Protection) isolation for Class I & Class II applications. These power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications. • 4 x 2 x 1.3 Inch Form Factor • 150 W with Forced-Air Cooling • Approved to EN/IEC 60601-1 • 12 V @ 0.5 A fan voltage auxiliary output • High Efficiency > 86% • Low conducted and radiated noise • Light weight • IEC Protection Class Options: • Class I: Earthing Tab J4 (no suffix) • Class II: No Earthing Tab (-2 suffix) • Medical Safety Agency Approvals • RoHS Compliant • Diagnostic • Dialysis • Drug Pump • Home Health Care • Monitoring • Portable Equipment

MBC150 Series 2 MAX LOAD MAX LOAD RIPPLE & MODEL1 CONNECTOR OUTPUT VOLTAGE MINIMUM LOAD CONVECTION 2 300 LFM 2,3, 4 NOISE5 MBC150-1005G JST 5 VDC 16.0 A 16.0 A 0.0 A 1% MBC150-1T05G Screw Terminal 5 VDC 16.0 A 20.0 A 0.0 A 1% MBC150-1012G JST 12 VDC 8.33 A 12.5 A 0.0 A 1% MBC150-1T12G Screw Terminal 12 VDC 8.33 A 12.5 A 0.0 A 1% MBC150-1015G JST 15 VDC 6.67 A 10.0 A 0.0 A 1% MBC150-1T15G Screw Terminal 15 VDC 6.67 A 10.0 A 0.0 A 1% MBC150-1024G JST 24 VDC 4.17 A 6.25 A 0.0 A 1% MBC150-1T24G Screw Terminal 24 VDC 4.17 A 6.25 A 0.0 A 1% MBC150-1048G JST 48 VDC 2.08 A 3.13 A 0.0 A 1% MBC150-1T48G Screw Terminal 48 VDC 2.08 A 3.13 A 0.0 A 1% COVER-201-XBC6 Metal cover kit accessory Specifications are for nominal input voltage, 25°C unless otherwise stated. PARAMETER DESCRIPTION / CONDITION SPECIFICATION Input Voltage Universal 90-264 VAC / 120-390 VDC Input Frequency 47 to 63 Hz 120 VAC: 1.7 A max. Input Current 230 VAC: 0.85 A max. No Load Power 1.2 W 120 VAC: 35 A max. Inrush Current 230 VAC: 65 A max. 120 VAC: < 140 µA Leakage Current 230 VAC: < 250 µA 120 VAC: 0.99 Power Factor 230 VAC: 0.95 PFC converter (variable) 35 - 250 kHz, 90 kHz typical Switching Frequency Resonant converter (variable) 35 - 250 kHz, 90 kHz typical 1 For Class II (without input Earth pin) add suffix -2 (e.g.: MBC150-1012G-2). 2 Combined output power from V1, VSTBY and VFAN should not exceed the total output power rating. 3 Fan output voltage tolerance is +/-20%. 4 Peak current for fan output is 1 A 5 Ripple is 2% up to 20% load and < 1% above 20% load. Ripple is peak to peak with 20 MHz bandwidth and 10 µF (Tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. 6 When used in Cover Kit, de-rate output power to 70 % under all operating conditions. tech.support@psbel.com

MBC150 Series 3 PARAMETER DESCRIPTION / CONDITION SPECIFICATION Derate output power linearly to 80% from 90 VAC to 80 VAC input 150 W Output Power Peak Power 170 W for 0.2 s 120 VAC: 84% typical Efficiency 230 VAC: 86% typical 120 VAC: 6 ms Hold Up Time 230 VAC: 10 ms Line Regulation +/-0.5% Load Regulation +/-2.0% Main output 50 to 100% load change, < 10%, Transient Response 50 Hz, 50% duty cycle, 0.1A / µs recovery time < 5 ms Rise Time < 100 ms Set Point Accuracy Main output ± 1% Voltage Adjustment V1 ± 3 % Over Current Protection 110% typical above rating Over Voltage Protection V1 110 to 150% Short Circuit Protection Short term, Automatic recovery PARAMETER DESCRIPTION / CONDITION SPECIFICATION Refer to derating curve -20 to 70°C Operating Temperature Start-up is guaranteed -20 to 0°C Storage Temperature -40 to 70° C Convection: 80 W 5 V model 300 LFM: 100 W Cooling Convection: 100 W Other models 300 LFM: 150 W Humidity Non Condensing 95% Operating: 10,000 ft. Altitude Non-Operating: 40,000 ft. Reliability MTBF according to Telcordia -SR332-Issue 3 2.4 million hours Conducted Emissions EN 55011-B, CISPR22-B, FCC PART15-B Pass EN 55011 A; Pass Radiated Emissions with external core (King core K5B RC 25x12x15-M in input cable) Level B Input Current Harmonics EN 61000-3-2 Class D Voltage Fluctuation and Flicker EN 61000-3-3 Pass ESD Immunity EN 61000-4-2 Level 4, Criterion A Radiated Field Immunity EN 61000-4-3 Level 3, Criterion A Electrical Fast Transient Immunity EN 61000-4-4 Level 3, Criterion A Surge Immunity EN 61000-4-5 Level 3, Criterion A Conducted Immunity EN 61000-4-6 Level 3, Criterion A Magnetic Field Immunity EN 61000-4-8 Level 4, Criterion A Voltage Dips, Interruptions EN 61000-4-11 Criterion A & B Asia-Pacific Europe, Middle East North America +86 755 298 85888 +353 61 225 977 +1 408 785 5200 © 2017 Bel Power Solutions & Protection BCD.00288_AE

MBC150 Series 4 PARAMETER DESCRIPTION / CONDITION SPECIFICATION Isolation Voltage Input to Output: Min. 5900 VDC Approved to the latest edition of the following standards: Safety Standards CSA/UL60601-1, EN60601-1 and IEC60601-1. Agency Approvals Nemko, UL, C-UL CE mark Complies with LVD Directive CONNECTOR PIN DESCRIPTION / CONDITION MANUFACTURER / PN Pin 1 AC Line Molex: 26-60-4030 or equivalent AC Input Connector J1 Pin 2 AC Neutral Mating: 09-50-3031; Pins: 08-50-0106 Option-1: Tyco: 1776112-4 or equivalent Mating: 13 AWG wire Pin 1,2 V1 DC Output Connector J2 Option-2: JST: B4P-VH-B (LF) (SN) or B4P-VH (LF) (SN) or Pin 3,4 RTN equivalent Mating: VHR-4M; Pins: SVH-41T-P1.1 Pin 1 VFAN (12 V / 0.5 A) Tyco: 640456-2 or equivalent Fan J3 Pin 2 RTN Mating: 640440-2 Molex: 19705-4301 or equivalent Earthing Tab J4 Mating: 190030001 PARAMETER DESCRIPTION / CONDITION Weight 150 g (0.33 lbs.) Dimensions 101.6 x 50.8 x 33.6 mm (4.0 x 2.0 x 1.3 inch) Figure 2 - Mechanical Drawing tech.support@psbel.com

MBC150 Series 5 NOTES: In case the PCB is mounted in a metal enclosure, using metal hardware ensure the following: 1 Stand off, used to mount PCB has OD of 5.4 mm max. 2 Screws, used to fix PCB on stand off, have head dia of 6.0 mm max. 3 Washer, if used, to have dia of 6.5 mm max. Convection load: 80 W up to 50 °C De-rate above 50 °C @ 3.125% per °C Forced air cooled load: 100W up to 50°C De-rate above 50 °C @ 2.5% per °C Convection load: 100 W up to 50 °C De-rate above 50 °C @ 2.5% per °C Forced air cooled load : 150 W up to 50°C De-rate above 50 °C @ 1.67% per °C Figure 2. Derating Curves NUCLEAR AND MEDICAL APPLICATIONS - Products are not designed or intended for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. Asia-Pacific Europe, Middle East North America +86 755 298 85888 +353 61 225 977 +1 408 785 5200 © 2017 Bel Power Solutions & Protection BCD.00288_AE

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: B el Power Solutions: MBC150-1T05G MBC150-1T12G MBC150-1T24G MBC150-1T48G MBC150-1024G MBC150-1015G MBC150- 1048G MBC150-1012G MBC150-1005G MBC150-1T15G