MASW-008543 SPDT High Isolation Terminated Switch 0.01- 4.0 GHz Rev. V4 Features Functional Block Diagram  Positive Voltage Control  High Isolation: Pin 1 62 dB @ 1 GHz 65 dB @ 2 GHz 1 8  Low Insertion Loss: 0.65 dB @ 1 GHz 2 7 0.70 dB @ 2 GHz  50 Ω Internal Terminations  Fast Settling for Low Gate Lag requirements 3 6  Lead-Free MSOP-8-EP Package  Halogen-Free “Green” Mold Compound 4 5  RoHS* Compliant and 260°C Reflow Compatible Description The MASW-008543 GaAs monolithic switch provides high isolation in a lead-free, plastic surface Pin Configuration3 mount package. This device is ideal for applications across a broad range of frequencies. Pin Function Pin Function MACOM fabricates the MASW-008543 using a 1 V1 5 RF Port 2 0.5-micron gate length pHEMT process. The 2 V2 6 Ground process features full chip passivation for performance and reliability. 3 RF Common 7 Ground 4 Ground 8 RF Port 1 3. The exposed pad centered on the package bottom must be Ordering Information1,2 connected to RF and DC ground. Part Number Package Handling Procedures MASW-008543-000000 Bulk Packaging Please observe the following precautions to avoid MASW-008543-TR3000 3000 piece reel damage: MASW-008543-001SMB Sample Board Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive 1. Reference Application Note M513 for reel size information. to electrostatic discharge (ESD) and can be 2. All sample boards include 5 loose parts. damaged by static electricity. Proper ESD control techniques should be used when handling these devices. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 111 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: https://www.macomtech.com/content/customersupport

MASW-008543 SPDT High Isolation Terminated Switch 0.01- 4.0 GHz Rev. V4 Electrical Specifications4: T = 25°C, V = 3 V, V = 0 V, Z = 50 Ω A HIGH LOW 0 Parameter Test Conditions Units Min. Typ. Max. 1.0 GHz 0.65 — 2.0 GHz 0.70 0.95 Insertion Loss dB — 3.0 GHz 0.85 — 4.0 GHz 1.10 — 1.0 GHz — 62 2.0 GHz 62 65 Isolation dB — 3.0 GHz — 50 4.0 GHz — 45 Return Loss 0.5 - 4.0 GHz dB — 20 — Input IP 2-Tone, 2.1 GHz, 10 MHz spacing dBm — 53 — 3 2.1 GHz, V = 3 V 25 P1dB HIGH dBm — — 2.1 GHz, V = 5 V 30 HIGH 2.1 GHz, V = 3 V 20 P0.1dB HIGH dBm — — 2.1 GHz, V = 5 V 25 HIGH T , T 10% to 90% RF & 90% to 10% RF ns — 30 — RISE FALL T , T 50% of V to 10% / 90% RF ns — 52 — ON OFF C Transients In-band mV — 12 — Control Current - µA — <1 5 4. External DC blocking capacitors are required on all RF ports (39 pF capacitors are recommended). Absolute Maximum Ratings5,6 Truth Table7,8,9 Parameter Absolute Maximum V1 V2 RFC-RF1 RFC-RF2 Input Power, V = 3 V (0.5 - 3.0 GHIHGHz) 33 dBm VHIGH VLOW On Off Operating Voltage 8 V VLOW VHIGH Off On Operating Temperature -40°C to +85°C 7. V = 0 V ± 0.2 V, V = 1.8 V to +5 V, minimum V - LOW HIGH HIgh V = 1.8 V, maximum V - V = 8.0 V. LOw HIgh LOw Storage Temperature -65°C to +150°C 8. For use at low voltage, MACOM recommends connecting a 20K pull up resistor on pin 3 to a voltage equal to the most positive control voltage. 5. Exceeding any one or combination of these limits may cause 9. Negative control voltage may be used. The V in the table permanent damage to this device. HIGH would be the most positive (0 V) and the V would be the 6. MACOM does not recommend sustained operation near these LOw most negative (-3 V for example). survivability limits. 222 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: https://www.macomtech.com/content/customersupport

MASW-008543 SPDT High Isolation Terminated Switch 0.01- 4.0 GHz Rev. V4 Typical Performance Curves Insertion Loss Isolation 0.00 -30 -0.25 -40 -0.50 -50 -0.75 -60 -1.00 -70 +25ºC -1.25 +-4205ººCC -80 -+4805ººCC +85ºC -1.50 -90 0.0 1.0 2.0 3.0 4.0 0.0 1.0 2.0 3.0 4.0 Frequency (GHz) Frequency (GHz) Output Return Loss (on state) Output Return Loss (off state) 0.0 0.0 -10 -10 -20 -20 -30 -30 +25ºC -40 +25ºC -40 -40ºC -40ºC +85ºC +85ºC -50 -50 0.0 1.0 2.0 3.0 4.0 0.0 1.0 2.0 3.0 4.0 Frequency (GHz) Frequency (GHz) Input Return Loss (on state) 0.0 -10 -20 -30 +25ºC -40 -40ºC +85ºC -50 0.0 1.0 2.0 3.0 4.0 Frequency (GHz) 333 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: https://www.macomtech.com/content/customersupport

MASW-008543 SPDT High Isolation Terminated Switch 0.01- 4.0 GHz Rev. V4 Applications Section—Low Frequency Measurement Insertion Loss Isolation 0.0 -45 -0.2 Insertion Loss RFC-RF1 (dB) -50 Isolation (RFC-RF1) S21 (dB) Insertion Loss RFC-RF2 (dB) Isolation (RFC-RF2) S21 (dB) -0.4 -55 -0.6 -60 -0.8 -65 -1.0 -70 0.0 0.2 0.4 0.6 0.8 1.0 0.0 0.2 0.4 0.6 0.8 1.0 Frequency (GHz) Frequency (GHz) Return Loss This data shows the MASW-008543 measured on 0 an evaluation board with 0 Ω resistors. The board RFC Return Loss (dB) and connector loss have been removed. RF Port Return Loss (dB) -5 Terminated Port Return Loss (dB) 0 Ω resistors can be used if negative control is -10 available. To avoid changing the device bias points, the device should not be exposed to DC -15 potentials on the RF ports. -20 With positive control MACOM recommends using DC-Blocking capacitors large enough that their -25 X is insignificant at the frequency of use. At c 50 MHz a capacitor value greater than 1000 pF is -30 recommended. 0.0 0.2 0.4 0.6 0.8 1.0 Frequency (GHz) 444 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: https://www.macomtech.com/content/customersupport

MASW-008543 SPDT High Isolation Terminated Switch 0.01- 4.0 GHz Rev. V4 Lead-Free MSOP-8-EP† † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. 555 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: https://www.macomtech.com/content/customersupport

MASW-008543 SPDT High Isolation Terminated Switch 0.01- 4.0 GHz Rev. V4 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 666 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: https://www.macomtech.com/content/customersupport