The Bel Power Solutions MAP30/40/42 Series of power supplies combines low cost and universal input in a board-only power solution to meet commercial and industrial requirements. Full international safety, EMI and ESD compliance ensure worldwide acceptance. All units bear the CE Mark. Fixed frequency operation simplifies system level operation. The MAP30/40/42 Series is configured to the international standard 3 x 5 inch footprint. Input and output connections are made via popular single-row Molex connectors. Single output models feature wide- range output adjustability to meet a wide variety of standard and user- specific output voltage requirements. • Universal Input 85-264 VAC • Input Transient & ESD Compliance to EN61000-4-2/-3/-4 • Meets EN55022 Conducted and Radiated Limits • Greater than 311,000 Hours MTBF • Remote Sense (MAP30, MAP42) • RoHS Compliant • CE Marked to Low Voltage Directive

MAP30/40/42 Series 2 PEAK MODEL 9 OUTPUT ADJUSTMENT MAX OUTPUT OUTPUT LINE LOAD RIPPLE & INITIAL SETTING VOLTAGE RANGE CURRENT REGULATION REGULATION NOISE 2 ACCURACY CURRENT 1 MAP30-1005G 5V 4.7V to 5.8V 6A 8A 8 0.2% ±1% 1% 4.9V to 5.1V MAP42-1005 5V 4.7V to 5.8V 8A 11A 0.2% ±1% 1% 4.9V to 5.1V MAP42-1012G 12V/15V 11V to 18V 3.4/2.7A 3 4.6/3.7A 3 0.2% 1% 1% 11.9V to 12.1V MAP42-1024G 24V/28V 23V to 29V 1.7/1.4A 3 2.3/1.9A 3 0.2% 1% 1% 23.8V to 24.2V PEAK MAXIMUM MODEL 9 VOOULTTPAUGTE ADJRUASNTGMEE NT COUURTRPEUNTT OUTPUT REGULILNAET ION REGLUOLAADT ION RNIPOPISLEE 2& INIATCIACLU SREATCTYIN G OUTPUT CURRENT 4 POWER +5V 4.7V to 5.5V 3A 5A 0.2% 2% 1% 4.9V to 5.1V MAP40-3000G +12V Fixed 2A 3.5A 1% 3.5% 5 1% 11.5V to 12.5V 40 W 7 -12V Fixed 0.3A 0.5A 1% 2% 6 1% -11.5V to -12.5V 4.75V to +5V 3A 5A 0.2% 2% 1% 4.9V to 5.1V 5.25V MAP40-3100G +12V Fixed 2A 3.5A 1% 3.5% 5 1% 11.5V to 12.5V 40 W 7 -12V Fixed 0.3A 0.5A 1% 2% 1% -11.4V to -12.6V 4.75V to +5V 3A 5A 0.2% 2% 1% 4.9V to 5.1V 5.25V MAP40-3101G +24V Fixed 1A 1.5A 1% 3.5% 5 1% 23.0V to 25.0V 40 W 7 -12V Fixed 0.3A 0.5A 1% 2% 1% -11.5V to -12.5V +5V 4.7V to 5.8V 3A 5A 0.2% 2% 1% 4.9V to 5.1V MAP40-3105G +12V Fixed 2A 3.5A 1% 3.5% 5 1% 11.5V to 12.5V 40 W 7 -5V Fixed 0.5A 1A 1% 2% 1% -4.75V to -5.25V +5V 4.7V to 5.8V 5A 6A 0.2% 2% 1% 4.9V to 5.1V MAP40-3500G +12V Fixed 1A 3.5A 1% 3.5% 5 1% 11.5V to 12.5V 40 W 7 -12V Fixed 0.3A 0.5A 1% 2% 1% -11.4V to -12.6V +5V 4.7V to 5.8V 3A 5A 0.2% 2% 1% 4.9V to 5.1V MAP40-3003G +15V Fixed 1.5A 3A 1% 3.5% 5 1% 14.7V to 15.3V 40 W 7 -15V Fixed 0.2A 0.5A 1% 2% 6 1% -14.3V to -15.7V 1 Peak ratings may be used as maximum output current with 100 Linear Feet per Minute (LFM) forced air cooling. 2 Maximum peak to peak noise expressed as a percentage of output voltage, 20 MHz bandwidth. 3 MAP42-1012G output currents are expressed as 12V/15V operation. MAP42-1024G output currents are expressed as 24V/28V operation. 4 Peak loads for 30 seconds or less are acceptable, (10% duty cycle max.). 5 Quasi regulated output. See Regulation Curves for more information. 6 Requires a minimum load of 0.5A on V1 or 0.3A on V2. 7 Needs 170 LFM forced air cooling for use at 50°C ambient. 8 Needs 200 LFM forced air cooling for use at 50°C ambient. 9 Non-G models use lead solder exemption and are not recommended for new designs. Xxx Model highlighted in yellow is not recommended for new designs. tech.support@psbel.com

MAP30/40/42 Series 3 PARAMETER CONDITIONS / DESCRIPTION MIN NOM MAX UNITS MAP42 85 264 Input Voltage - AC Continuous input range VAC MAP30, MAP40 90 264 Input Frequency AC input 47 63 Hz Lowest AC input voltage that regulation is maintained with full rated Brown Out Protection 85 VAC loads. Hold-up Time Nominal AC Input Voltage (115VAC), full rated load. 15 ms Input Current 90 VAC (40W load). 1.2 ARMS Input Protection Non-user serviceable internally located AC input line fuse. Inrush Surge Current Internally limited by thermistor, Vin = 264 VAC (one cycle), 25° C 38 APK Operating Frequency Switching frequency of power supply (fixed frequency). 23 25 30 kHz PARAMETER CONDITIONS / DESCRIPTION MIN NOM MAX UNITS Efficiency Full load @120 VAC 70% typical Single output models; MAP30, MAP42. 0.0 Amps Minimum Loads All multiple output models, see regulation graphs. Ripple and Noise Full load, 20 MHz bandwidth. See Model Selection Chart. Output Power Multiple output models with convection cooling. 40 Watts Overshoot / Undershoot Output voltage overshoot/undershoot at turn-on, V1. 1 % Varies by output, total regulation includes: Line changes from Regulation 90-132 VAC or 175-264, changes in load starting at 20% load and See regulation graphs. changing to 100% load. Recovery time, to within 1% of initial set point due to a 50-100% Transient Response load change, 4% max. deviation. (Main output only of multiple 500 μs output units). Turn-on Delay Time required for initial output voltage stabilization. 1 2 Sec Turn-on Rise Time Time required for output voltage to rise from 10% to 90%. 20 ms PARAMETER CONDITIONS / DESCRIPTION MIN NOM MAX UNITS MAP30-1005G, MAP42-1005 5.8 6.8 MAP42-1012G 20.0 22.0 Overvoltage Protection V MAP42-1024G 32.0 37.0 Main output only of multiple output units. 5.8 6.8 Fully protected against output overload and short circuit. Automatic Overload Protection 130 % recovery upon removal of overload condition. Remote Sense Total cable drop, single output models only. 250 mV Asia-Pacific Europe, Middle East North America +86 755 298 85888 +353 61 225 977 +1 408 785 5200 © 2018 Bel Power Solutions & Protection BCD.00563_AD

MAP30/40/42 Series 4 PARAMETER CONDITIONS / DESCRIPTION MIN NOM MAX UNITS Approved to the latest edition of the following standards; Agency Approvals UL/CSA60950-1 2nd, IEC60950-1 2nd and EN60950-1 2nd. Input to Chassis 2121 Dielectric Withstand Voltage VDC Input to Output (tested by manufacturer only) 4242 FCC CFR title 47 part 15 sub-part B - conducted B Electromagnetic EN55022 / CISPR 22 conducted (Note 1) B Class Interference EN55022 / CISPR 22 radiated (Note 2) B Line to Line 1 Input Transient Protection EN61000-4-5 Level 3 kV Line to Ground 2 Insulation Resistance Input to output 7 MΩ MAP42, 500 MAP40-3100G/3101G/3105G/3500G Leakage Current Per EN60950, 264VAC μA MAP30-1005G, 750 MAP40-3000G, MAP40-3003G Notes: 1) MAP30-1005G, MAP40-3000G, MAP40-3003G meet Class A. 2) MAP40-3000G, MAP40-3003G, MAP40-3500G meet Class A. PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS Operating 10k Altitude ASL Ft. Non-operating 40k Derate linearly above 50°C by 2.5% per °C At 100% load: 0 50 Operating Temperature °C to a maximum temperature of 70°C At 50% load: 0 70 Storage Temperature -40 85 °C Temperature Coefficient 0°C to 70°C (after 15 minute warm-up) ±0.02 ±0.03 %/°C Relative Humidity Non-condensing 5 95 %RH Shock Operating, peak acceleration 20 G Vibration Random vibration, 10Hz to 2kHz, 3 axis 6 GRMS 14.25 13.75 13.25 12.75 +5V @ 5.0 Amps 12.25 +5V @ 3.0 Amps +5V @ 1.0 Amps 11.75 +5V @ 0 Amps 11.25 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 12V OUTPUT CURRENT Figure1. MAP40-3500G Typical Quasi Regulation Performance For +12V Output tech.support@psbel.com

MAP30/40/42 Series 5 13.5 13.0 12.5 12.0 +5V @ 3.0 Amps +5V @ 1.8 Amps 11.5 +5V @ 0.6 Amp s +5V @ 0 Amps 11.0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 12V OUTPUT CURRENT Figure 2. MAP40-3000/3100/3105G Typical Quasi Regulation Performance For +12V Output 17.0 16.5 16.0 15.5 15.0 +5V @ 3.0 Amps +5V @ 1.8 Amps 14.5 +5V @ 0.6 Amps 14.0 +5V @ 0 Amps 13.5 0 0.15 0.3 0.45 0.6 0.75 0.9 1.05 1.2 1.35 1.5 15V OUTPUT CURRENT Figure 3. MAP40-3003G Typical Quasi Regulation Performance For +15V Output J1 MAP30 J2 MAP40 J2 MAP42 J2 NEUTRAL PIN 1 PIN 7 N/C PIN 6 V2 PIN 6 V1 V1 V1 V1 V1 V1 GND LINE PIN 2 J 3 GND GND GND GND GND +Sense SAFETY EARTH GROUND +Sense PIN 1 V3 PIN 1 -Sense (0.250" x 0.032" FASTON) PIN 1 -Sense J1/J2 MATES WITH MOLEX (SERIES 2139 or SERIES 41695) .156" (4mm) CENTER CRIMP TERMINAL HOUSING OR EQUIVALENT Figure 4. Electrical Connectors PARAMETER CONDITIONS / DESCRIPTION MIN NOM MAX UNITS 127.0 x 76.2 x see table below mm Dimensions 5.0 x 3.0 x see table below in 0.26 kg Weight 0.6 lb Asia-Pacific Europe, Middle East North America +86 755 298 85888 +353 61 225 977 +1 408 785 5200 © 2018 Bel Power Solutions & Protection BCD.00563_AD

MAP30/40/42 Series 6 SINGLE OUTPUT MODELS MULTIPLE OUTPUT MODELS Model Height Model Height MAP30-1005G 1.16" (29.5) MAP40-3000G 1.16" (29.5) MAP42-1005 1.25" (31.8) MAP40-3003G 1.16" (29.5) MAP42-1012G 1.25" (31.8) MAP40-3100G 1.25" (31.8) MAP42-1024G 1.25" (31.8) MAP40-3101G 1.25" (31.8) MAP40-3105G 1.25" (31.8) MAP40-3500G 1.60" (40.6) Table 1. MAP30/40/42 Series Height . . Figure 1. Mechanical Drawing NUCLEAR AND MEDICAL APPLICATIONS - Products are not designed or intended for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. tech.support@psbel.com