MADR-009443 Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V4 Features Functional Schematic  High Voltage CMOS Technology VCC VOPT  Four Channel  Positive Voltage Control  CMOS device using TTL input levels Logic C1 TTL Buffer Level Shifter Output A1  Low Power Dissipation  Low Cost 4 mm, 20-lead PQFN Package  100% Matte Tin Plating over Copper VOPT Driver 1  Halogen-Free ―Green‖ Mold Compound VEE  RoHS* Compliant Inverter Level Shifter Output B1 Description The MADR-009443 is a four channel driver used to translate TTL control inputs into gate control VEE voltages for GaAs FET microwave switches and Output A2 attenuators. High speed analog CMOS technology is utilized to achieve low power dissipation at Logic C2 DSarimveer a1s moderate to high speeds, encompassing most Output B2 microwave switching applications. The output HIGH level is optionally 0 to 2 V (relative to GND) to Output A3 optimize the intermodulation products of FET control Logic C3 Same as Driver 1 devices at low frequencies. For driving PIN diode Output B3 circuits, the outputs are nominally switched between +5 V & -5 V. The actual driver output voltages will be lower when driving large currents due to the Output A4 resistance of the output devices. Logic C4 DSarimveer a1s Output B4 Pin Configuration2 Pin # Function Pin # Function 1 Ground 11 Output A4 Ordering Information1 2 N/C 12 Output B4 Part Number Package 3 N/C 13 VEE 4 Output A1 14 N/C MADR-009443-000100 Bulk Packaging 5 Output B1 15 V MADR-009190-000DIE 100 piece waffle pack CC 6 Output A2 16 C4 MADR-009443-0001TR 1000 piece reel 7 Output B2 17 C3 1. Reference Application Note M513 for reel size information. 8 NC 18 C2 9 Output A3 19 C1 10 Output B3 20 V OPT 2. The bottom of the die should be isolated or connected to ground. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 111 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0007428

MADR-009443 Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V4 DC Characteristics over Guaranteed Operating Range Symbol Parameter Test Conditions Units Min. Typ. Max. V Input High Voltage Guaranteed High Input Voltage V 2.0 — — IH V Input Low Voltage Guaranteed Low Input Voltage V — — 0.8 IL V Output High Voltage I = -0.5 mA V V - 0.1 — — OH OH OPT V Output Low Voltage I = +0.5 mA V — — V + 0.1 OL OL EE Input Leakage Current V = V or GND, V = min, I IN CC EE nA -250 — 250 IN (per input) V = max, V = min or max CC OPT DC Output Current - High V = +5.0 V, V = -5.0 V, I CC EE mA -35 — — OH (per output) V = +5.0 V OPT DC Output Current - Low V = +5.0 V, V = -5.0 V, I CC EE mA — — 35 OL (per output) V = +5.0 V OPT Peak Spike Output Current V = +5.0 V, V = -5.0 V, I (Rising Edge) CC EE mA — 35 — OH_SPIKE V = +5.0 V, C = 25 pF (per output) OPT L Peak Spike Output Current V = +5.0 V, V = -5.0 V, I (Falling Edge) CC EE mA — 50 — OL_SPIKE V = +5.0 V, C = 25 pF (per output) OPT L V = V or GND, V = -10.5 V, IN CC EE I Quiescent Supply Current V = +5.5 V, V = +5.5 V, µA — — 20 CC CC OPT No Output Load Additional Supply Current ∆ I V = max, V = V -2.1 V mA — — 1.0 CC (per TTL input pin) CC IN CC V = V or GND, V = -10.5 V, IN CC EE I Quiescent Supply Current V = +5.5 V, V = +5.5 V, µA — — 20 EE CC OPT No Output Load V = V or GND, V = -10.5 V, IN CC EE I Quiescent Supply Current V = +5.5 V, V = +5.5 V, µA — — 20 OPT CC OPT No Output Load V = +5.0 V, V = -5.0 V, Output Resistance NFET On CC EE R V = +5.0 V, V = -4.9 V Ω — 40 — NFET (to V ) OPT OUT EE +25°C, Note 3 V = +5.0 V, V = -5.0 V, Output Resistance PFET On CC EE R V = +5.0 V, V = +4.9 V Ω — 45 — PFET (to V ) OPT OUT OPT +25°C, Note 3 3. See plot of R and R for variations over temperature for driving 4.99k and 82 Ω resistive load. (Note that this corresponds to 1 mA NFET PFET and 33 mA currents at +25°C). V is approximate for 1 mA load. OUT 222 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0007428

MADR-009443 Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V4 AC Characteristics Over Guaranteed Operating Range4 Typical performance Symbol Parameter Unit -40°C +25°C +85°C T Propagation Delay ns 20 22 25 PLH T Propagation Delay ns 20 22 25 PHL T Output Transition Time (Rising Edge) ns 5 6 8 TLH T Output Transition Time (Falling Edge) ns 5 6 8 THL T Delay Skew ns 2 2 2 skew PRF (max.) 50% Duty Cycle MHz DC — 10 C Input Capacitance pF 5 5 5 IN C Power Dissipation Capacitance5 pF 50 50 50 PDC C Power Dissipation Capacitance5 pF 100 100 100 PDE 4. VCC = 4.5 V, VOPT = 0 V, VEE = min or max, CL = 25 pF, input LOGIC1 = 3 V, LOGIC0 = 0 V, TRISE, TFALL = 6 ns. 5. Total Power Dissipation is calculated by the following formula: PD = VCC2fC PDC + VEE2fCPDE Truth Table Output Resistance vs. Temperature6 Input Outputs 120.0 Cn An Bn PFET with 82Ω load 100.0 NFET with 82Ω load s) m Logic ―0‖ V V h EE OPT O 80.0 e ( PFET with 4.99k load c n Logic ―1‖ VOPT VEE sista 60.0 e R 40.0 NFET with 4.99k load 20.0 -55.0 -25.0 5.0 35.0 65.0 95.0 125.0 Handling Procedures Temperature (C) Please observe the following precautions to avoid damage: 6. Output resistance were measured under the condition of V = +5.0 V, V = +5.0 V, and V = -5.0 V, with load Static Sensitivity reCsCistors from ouOPtpTuts to ground. EE Silicon Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 333 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0007428

MADR-009443 Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V4 Guaranteed Operating Ranges (for driving FET or PIN devices)7,8,9 Symbol Parameter Unit Min. Typ. Max. V Positive DC Supply Voltage V 4.5 5.0 5.5 CC V Negative DC Supply Voltage V -10.5 -5.0 -4.5 EE V 10,11 Optional DC Output Supply Voltage V 0 — V OPT CC V - V Negative Supply Voltage Range V 4.5 Note 10,11 16.0 OPT EE V - V Positive to negative Supply Range V 9.0 10.0 16.0 CC EE T Operating Temperature °C -40 +25 +85 OPER I DC Output Current - High mA -35 — — OH I DC Output Current - Low mA — — 35 OL T , T Maximum Input Rise or Fall Time ns — — 500 RISE FALL 7. Unused logic inputs must be tied to either GND or V . CC 8. MACOM recommends that V be powered on before V , and powered off after V . CC EE EE 9. 0.01 µF decoupling capacitors are required on the power supply lines. 10. V is grounded in most cases when FETs are driven. To improve the intermodulation performance and the 1 dB compression point of OPT GaAs control devices at low frequencies, V can be increased to between 1 and 2 V. The nonlinear characteristics of the GaAs control OPT devices will approximate performance at 500 MHz. It should be noted that the control current that is on the GaAs MMICs will increase when positive controls are applied. 11. When this driver is used to drive PIN diodes, V is often set to +5 V, with V set to -5 V. OPT EE 444 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0007428

MADR-009443 Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V4 Absolute Maximum Ratings12 Symbol Parameter Unit Min. Max. V Positive DC Supply Voltage V -0.5 7.0 CC Positive DC Supply Current I mA — 20 CC (-0.5 V ≤ V ≤ 0.8 V; 2.0 V ≤ V ≤ V +0.5 V; V - V ≤ 7.0 V ) IN IN CC CC IN V Negative DC Supply Voltage V -11.0 0.5 EE I Negative DC Supply Current (per Output)13 mA -50 — EE V Optional DC Output Supply Voltage V -0.5 V +0.5 OPT CC I Optional DC Output Supply Current (per Output)13 V — 50 OPT V - V Output to Negative Supply Voltage Range V -0.5 18.0 OPT EE V V Positive to Negative Supply Voltage Range V -0.5 18.0 CC - EE -0.5 V DC Input Voltage V V +0.5 IN Note 14 CC V DC Output Voltage V V – 0.5 V + 0.5 O EE OPT P 15 Power Dissipation in Still Air W — 1 D T Operating Temperature °C -55 125 OPER T Storage Temperature °C -65 150 STG ESD ESD Sensitivity kV 2.0 — 12. All voltages are referenced to GND. All inputs and outputs incorporate latch-up protection structures. 13. The maximum I and I are specified under the condition of V = +5.5 V, V = -5.5 V, V = +5.5 V, and the total power dissipation is EE OPT CC EE OPT within 1 W in still air. 14. If V ≥ 6.5 V, then the minimum for V is V - 7.0 V. CC IN CC 15. Derate -7 mW/°C from 65°C to 85°C. 555 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0007428

MADR-009443 Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V4 Switching Waveforms T T r f LOGIC 1 90% 90% 1.3V 1.3V INPUT C VIN 10% 10% LOGIC 0 T T PLH PHL T T TLH THL OUTPUT OUTPUT B 90% 90% HIGH V 50% 50% OUT 10% 10% OUTPUT OUTPUT A LOW T T SKEW SKEW Equivalent Output Circuit for An and Bn Outputs (33 mA load at 25°C) PFET 62 ohms Vopt An and Bn Outputs Vee NFET 67 ohms 666 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0007428

MADR-009443 Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V4 Typical Application for a SPDT Switch16 RF1 RF SECTION VCC +5V C1 C3 .01 µF 560 pF VOPT 15 C1 20 B51 R1 RF Common 19 Logic MADR-009443- 000100 A1 13 4 R2 1 VEE -5V C2 .01 µF C4 Rc 560 pF GND RF2 16. Only one section of MADR-009443 is shown. The other three sections will have equivalent performance. Description of Circuit The MADR-009443 provides four pairs of complementary outputs that are each capable of driving a maximum of ±35 mA into a load. In addition, with proper capacitor selection (C3 & C4) used in parallel with the current setting resistor (R1 & R2), additional spiking current can be achieved. To achieve the Non-Inverting and Inverting complementary voltages, each output is switched between two internal FETs. The FETs are connected to V for the positive output and V for the negative output. V and OPT EE OPT V are adjustable for various configurations and have the following limitations: V can be no more negative than EE EE -10.5 volts; V can be no more positive than +5.5 volts and V must always be less than or equal to V . OPT OPT CC Increasing V beyond V will prevent the device from switching states when commanded to by the logic input. OPT CC The most common configuration is to drive V at -5.0 volts with V and V tied together at +5.0 volts. EE CC OPT 777 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0007428

MADR-009443 Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V4 Lead-Free, 4 mm, 20-lead PQFN† † Reference Application Note M538 for lead-free solder reflow recommendations. Plating is 100% matte tin over copper. 888 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0007428

MADR-009443 Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V4 Pad Configuration17,18 Die Outline (MADR-009190-000DIE) Die Size: 1325 x 1735 µm (nominal) X (µm) Y (µm) Pad Size (µm) Pad No. nominal nominal X x Y 0 0 0 Lower left edge of die 1 482.95 1489 85 x 85 2 217.85 1534.6 85 x 85 3 200.45 1407.9 85 x 85 4 200.45 1114.2 85 x 85 5 200.45 820.45 85 x 85 6 200.45 526.8 85 x 85 7 200.45 229.35 85 x 85 8 395.6 157.95 85 x 85 9 777.55 181.5 132 x 94 10 1126.35 181.75 132 x 94 11 1126.35 436.85 132 x 94 12 1126.35 691.95 132 x 94 13 1126.35 947.05 132 x 94 14 1126.35 1202.15 132 x 94 15 1126.35 1457.3 132 x 94 16 767.9 1553.5 132 x 94 17 1325 1735 Upper right edge of die 17. All X,Y dimensions are at bond pad center. 18. Die thickness is 8.0 mils. 999 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0007428

MADR-009443 Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V4 MACOM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with MACOM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 111000 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0007428

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: M ACOM: MADR-009443-000100 MADR-009443-0001TR