IllumInatIon luXEon Rebel Color line High flux and efficacy on industry’s most widely used color LED platform The LUXEON Rebel Color Line has leading light output, color stability, flux density and clear saturated colors. These color LEDs are ideal for a wide variety of lighting, signaling, signage and entertainment applications. Every LUXEON Rebel Color emitter has built-in quality, reliability, lumen maintenance and the ease of manufacturing needed to create a superior, high quality light. LUXEON Rebel Color emitters give designers an endless palette of colors to work with, adding interest, dimension and liveliness to all lighting projects. FEatuREs and BEnEFIts PRImaRy aPPlICatIons Full color palette for a wider spectrum range Architectural Highest efficacy available for colors, allowing for lower power consumption Lamps High flux and leading hot and cold performance for saturated colors Specialty Lighting Fully developed ecosystem for LUXEON Rebel platforms – Emergency Lighting – Entertainment DS68 LUXEON Rebel Color Line Product Datasheet ©2017 Lumileds Holding B.V. All rights reserved. No. E352519

Table of Contents General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Product Test Conditions.............................................................................. 2 Part Number Nomenclature .......................................................................... 2 Lumen Maintenance................................................................................. 2 Environmental Compliance ........................................................................... 2 Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Selection Guide.............................................................................. 3 Electrical and Thermal Characteristics.................................................................. 4 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Spectral Power Distribution Characteristics............................................................. 6 Light Output Characteristics .......................................................................... 7 Forward Current Characteristics....................................................................... 9 Radiation Pattern Characteristics.....................................................................13 Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Decoding Product Bin Labeling.......................................................................18 Luminous Flux Bins.................................................................................19 Radiometric Power Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Dominant and Peak Wavelength Bins .................................................................21 Color Bin Definitions................................................................................22 Forward Voltage Bins ...............................................................................23 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 JEDEC Moisture Sensitivity ...........................................................................26 Solder Pad Design..................................................................................27 Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Pocket Tape Dimensions ............................................................................28 Reel Dimensions ...................................................................................29 DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. i

General Product Information Product Test Conditions LUXEON Rebel Color Line LEDs are tested and binned with a DC drive current and junction temperature specified below: LUXEON Rebel Lime – 350mA, T=85°C j LUXEON Rebel ES Blue and LUXEON Rebel ES Royal Blue – 700mA, T=25°C j All other colors – 350mA, T=25°C j Part Number Nomenclature Part numbers for LUXEON Rebel Color Line follow the convention below: L X M L – P A 0 B – C C C C L X M 2 – P A 0 B – C C C C L X M 3 – P A 0 B – C C C C L X M 5 – P A 0 B Where: A – designates color (X=Lime, M=Green, E=Cyan, B=Blue, R=Royal Blue, F=Far Red, D=Deep Red and Red, H=Red-Orange, L=PC Amber and Amber, B=Blue, R=Royal Blue ) B – designates diode size (1=1mm2 and 2=2mm2) C C C C – designates minimum luminous flux (lm) or radiometric power (mW) performance (see Product Selection Guide) Therefore, the following part number is used for a LUXEON Rebel Red, 1mm2 diode size, with a minimum luminous flux of 50: L X M 2 – P D 0 1 – 0 0 5 0 Lumen Maintenance Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long- term performance of this product. Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Rebel Color Line is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 2

Performance Characteristics Product Selection Guide Table 1 . Product performance of LUXEON Rebel Color Line at test conditions . domInant [1, 2] or lumInIous FluX [1, 3] (lm) or ColoR PEaK WaVElEnGtH [2] (nm) RadIomEtRIC PoWER [3] (mW) tEst CuRREnt PaRt numBER (ma) mInImum maXImum mInImum tyPICal Far Red 720 750 210 260 350 LXML-PF01 Deep Red 650 670 270 360 350 LXM3-PD01 620 645 60 62 350 LXM2-PD01-0060 620 645 50 53 350 LXM2-PD01-0050 620 645 40 48 350 LXM2-PD01-0040 Red 620 645 50 52 350 LXML-PD01-0050 620 645 40 46 350 LXML-PD01-0040 620 645 30 38 350 LXML-PD01-0030 620 645 50 64 350 LXM5-PD01 610 620 70 72 350 LXM2-PH01-0070 610 620 60 67 350 LXM2-PH01-0060 Red-Orange 610 620 60 62 350 LXML-PH01-0060 610 620 50 56 350 LXML-PH01-0050 610 620 50 90 350 LXM5-PH01 PC Amber 594 604 80 110 350 LXM2-PL01-0000 585 595 60 61 350 LXML-PL01-0060 585 595 50 54 350 LXML-PL01-0050 Amber 585 595 40 48 350 LXML-PL01-0040 585 595 30 38 350 LXML-PL01-0030 585 595 50 74 350 LXM5-PL01 Lime 566 569 140 184 350 LXML-PX02-0000 520 540 100 102 350 LXML-PM01-0100 520 540 90 95 350 LXML-PM01-0090 Green 520 540 80 88 350 LXML-PM01-0080 520 540 70 79 350 LXML-PM01-0070 490 515 80 83 350 LXML-PE01-0080 Cyan 490 515 70 76 350 LXML-PE01-0070 490 515 60 67 350 LXML-PE01-0060 460 485 40 41 350 LXML-PB01-0040 460 485 30 35 350 LXML-PB01-0030 Blue 460 485 23 28 350 LXML-PB01-0023 460 485 18 22 350 LXML-PB01-0018 460 485 50 74 700 LXML-PB02 440 460 500 520 350 LXML-PR01-0500 440 460 1100 1120 700 LXML-PR02-1100 440 460 1050 1070 700 LXML-PR02-1050 440 460 1000 1030 700 LXML-PR02-1000 Royal Blue 440 460 950 970 700 LXML-PR02-0950 440 460 900 940 700 LXML-PR02-0900 440 460 800 890 700 LXML-PR02-0800 440 460 900 1030 700 LXML-PR02-A900 [4] Notes for Table 1: 1. Lumileds maintains a tolerance of ±0.5nm for dominant wavelength and ±6.5% on luminous flux measurements.. 2. Far Red, Deep Red and Royal Blue are binned by peak wavelength and all other colors by dominant wavelength. 3. Far Red, Deep Red and Royal Blue are binned by radiometric power and all other colors by luminous flux. 4. LXML-PR02-A900 is a selection of color bins 4 and 5 only. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 3

Table 2 . Optical characteristics for LUXEON Rebel Color Line at test conditions . tyPICal tEmPERatuRE tyPICal sPECtRal tyPICal total tyPICal CoEFFICIEnt oF domInant ColoR PaRt numBER HalF-WIdtH [1] InCludEd VIEWInG or PEaK WaVElEnGtH (nm) anGlE [2] anGlE [3] (nm/°C) Far Red LXML-PF01 [4] 30 0.17 145° 125° Deep Red LXM3-PD01 [4] 20 0.05 145° 125° LXM2-PD01 [4, 6] 20 0.05 145° 125° Red LXML-PD01 [4, 6] 20 0.05 145° 125° LXM5-PD01 [4, 6] 20 0.05 145° 125° LXM2-PH01 [4, 6] 20 0.08 145° 125° Red-Orange LXML-PH01 [4, 6] 20 0.08 145° 125° LXM5-PH01 [4, 6] 20 0.08 145° 125° PC Amber LXM2-PL01 [5] 80 -0.01 140° 120° LXML-PL01 [4, 6] 20 0.10 145° 125° Amber LXM5-PL01 [4, 6] 20 0.10 145° 125° Lime LXML-PX02 [5] 100 0.01 145° 125° Green LXML-PM01 [5] 30 0.05 145° 125° Cyan LXML-PE01 [5] 30 0.04 145° 125° LXML-PB01 [5] 20 0.05 145° 125° Blue LXML-PB02 [5] 20 0.05 145° 125° LXML-PR01 [5] 20 0.04 145° 125° Royal Blue LXML-PR02 [5] 20 0.04 145° 125° Notes for Table 2: 1. Spectral width at ½ of the peak intensity. 2. Total angle at which 90% of total luminous flux is captured. 3. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value. 4. Far Red, Deep Red, Red, Red-Orange and Amber products are built with aluminum indium gallium phosphide (AlInGaP). 5. PC Amber, Lime, Green, Cyan, Blue and Royal Blue products are built with Indium Gallium Nitride (InGaN). 6. Wavelength ranges for hot tested Red, Red-Orange and Amber have been defined to align with typical changes in spectral output at increased temperature. Electrical and Thermal Characteristics Table 3 . Electrical and thermal characteristics for LUXEON Rebel Color Line at test conditions . FoRWaRd VoltaGE [1] (V) tyPICal tEmPERatuRE tyPICal tHERmal f ColoR PaRt numBER CoEFFICIEnt oF FoRWaRd REsIstanCE—JunCtIon mInImum tyPICal maXImum VoltaGE [2] (mV/°C) to soldER Pad (°C/W) Far Red LXML-PF01 1.60 1.80 2.40 -2.0 to -4.0 5.50 Deep Red LXM3-PD01 1.80 2.10 2.80 -2.0 to -4.0 8.00 LXM2-PD01 1.80 2.10 2.80 -2.0 to -4.0 8.00 Red LXML-PD01 2.31 2.90 3.51 -2.0 to -4.0 12.00 LXM5-PD01 1.80 2.10 2.60 -2.0 to -4.0 7.00 LXM2-PH01 1.80 2.10 2.80 -2.0 to -4.0 8.00 Red-Orange LXML-PH01 2.31 2.90 3.51 -2.0 to -4.0 12.00 LXM5-PH01 1.80 2.10 2.60 -2.0 to -4.0 7.00 PC Amber LXM2-PL01 2.55 3.05 3.51 -2.0 to -4.0 10.00 LXML-PL01 2.31 2.90 3.51 -2.0 to -4.0 12.00 Amber LXM5-PL01 1.80 2.10 2.60 -2.0 to -4.0 7.00 Lime LXML-PX02 2.60 2.75 3.00 -2.0 to -4.0 6.00 Green LXML-PM01 2.55 3.21 3.51 -2.0 to -4.0 10.00 Cyan LXML-PE01 2.55 3.17 3.51 -2.0 to -4.0 10.00 LXML-PB01 2.55 2.95 3.51 -2.0 to -4.0 10.00 Blue LXML-PB02 2.50 2.95 3.50 -2.0 to -4.0 6.00 LXML-PR01 2.55 2.95 3.51 -2.0 to -4.0 10.00 Royal Blue LXML-PR02 2.50 2.90 3.50 -2.0 to -4.0 6.00 Notes for Table 3: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Measured between 25°C and 110°C. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 4

Absolute Maximum Ratings Table 4a . Absolute maximum ratings for LUXEON Rebel Color Line at T=25°C . j FaR REd/ GREEn/Cyan/ Es BluE/ PaRamEtER dEEP REd/REd/ PC amBER BluE/Royal BluE Es Royal BluE REd-oRanGE/amBER DC Forward Current [1, 2] 1000mA 1000 700mA 700mA Peak Pulsed Forward Current [1, 3] 1000mA 1200 700mA 700mA LED Junction Temperature [1] (DC & Pulse) 150°C 150°C 135°C 130°C ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 3A Class 3A Class 3A Class 3A Operating Case Temperature [1] -40°C to 135°C -40°C to 135°C -40°C to 120°C -40°C to 110°C LED Storage Temperature -40°C to 135°C -40°C to 135°C -40°C to 135°C -40°C to 135°C Soldering Temperature JEDEC 020c 260°C JEDEC 020c 260°C JEDEC 020c 260°C JEDEC 020c 260°C Allowable Reflow Cycles 3 3 3 3 -121°C at 2 ATM Autoclave Conditions 100% Relative Humidity for 96 Hours Maximum Reverse Voltage (V ) LUXEON LEDs are not designed to be driven in reverse bias reverse Notes for Table 4a: 1. Proper current derating must be observed to maintain the junction temperature below the maximum. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” with frequencies ≥100Hz and amplitude ≤15% of the maximum allowable DC forward current are acceptable, assuming the average current throughout each cycle does not exceed the maximum allowable DC forward current at the corresponding maximum junction temperature. 3. Pulsed operation with a peak drive current equal to the stated peak pulsed forward current is acceptable if the pulse on-time is ≤5ms per cycle and the duty cycle is ≤50%. Table 4b . Absolute maximum ratings for LUXEON Rebel Color Line at T=85°C . j PaRamEtER lImE DC Forward Current [1, 2] 1000 Peak Pulsed Forward Current [1, 3] 1200 LED Junction Temperature [1] (DC & Pulse) 150°C ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 3A Operating Case Temperature [1] -40°C to 135°C LED Storage Temperature -40°C to 135°C Soldering Temperature JEDEC 020c 260°C Allowable Reflow Cycles 3 Autoclave Conditions 100% Relative Humidity for 96 Hours Maximum Reverse Voltage (V ) LUXEON LEDs are not designed to be driven in reverse bias reverse Notes for Table 4b: 1. Proper current derating must be observed to maintain the junction temperature below the maximum. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” with frequencies ≥100Hz and amplitude ≤15% of the maximum allowable DC forward current are acceptable, assuming the average current throughout each cycle does not exceed the maximum allowable DC forward current at the corresponding maximum junction temperature. 3. Pulsed operation with a peak drive current equal to the stated peak pulsed forward current is acceptable if the pulse on-time is ≤5ms per cycle and the duty cycle is ≤50%. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 5

Characteristic Curves Spectral Power Distribution Characteristics Figure 1a. Typical normalized power vs. wavelength for LUXEON Rebel Far Red, Deep Red, Red, Red-Orange, PC Amber, Amber, Green, Cyan, Blue and Royal Blue at test current, T=25°C . j Figure 1b. Typical normalized power vs. wavelength for LUXEON Rebel PC Amber and Lime at 350mA, test temperature. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 6

Light Output Characteristics 1.2 1.1 x u Fl nt 1.0 a di a R 0.9 s/ u o n mi 0.8 Lu LUXEON Rebel ES Blue (LXML-PB02) e & Blue (LXML-PB01) Photometric vv elati 0.7 GPEre0e1n) (PLhXoMtoLm-PeMtri0c1) & Cyan (LXML- R LUXEON Rebel ES Royal-Blue (LXML- 0.6 PR02) & Royal-Blue (LXML-PR01) Radiometric 0.5 -20 0 20 40 60 80 100 120 140 Thermal Pad Temperature (°C) Figure 2a. Typical normalized light output vs. junction temperature for LXML-PM01, LXML-PE01, LXML-PB01, LXML-PB02, LXML-PR01 and LXML-PR02 at test current. 1.75 Red (LXML-PD01 & LXM2-PD01) 1.50 Red-Orange (LXML-PH01 & LXM2-PH01) ut Amber (LXML-PL01) p PC Amber (LXM2-PL01) Out 1.25 Far Red (LXML-PF01) x Deep Red (LXM3-PD01 u Fl s 1.00 u o n mi 0.75 u L e v ati 0.50 el R 0.25 0.00 -20 0 20 40 60 80 100 Thermal Pad Temperature (°C) Figure 2b. Typical normalized light output vs. junction temperature for LXML-PF01, LXM3-PD01, LXM2-PD01, LXML-PD01, LXM2-PH01, LXML-PH01, LXM2-PL01, LXML-PL01 at test current. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 7

1.75 1.50 ut Far Red (LXML-PF01) p Out 1.25 x u Fl s 1.00 u o n mi 0.75 u L e v ati 0.50 el R 0.25 0.00 0 20 40 60 80 100 120 140 Junction Temperature (°C) Figure 2c. Typical normalized light output vs. junction temperature for LXML-PF01 at test current. 1.2 Red (LXM5-PD01) Red Orange (LXM5-PH01) 1 Amber (LXM5-PL01) x u Fl0.8 s u o n mi0.6 u L e v ti0.4 a el R 0.2 0 0 20 40 60 80 100 120 140 Junction Temperature (°C) Figure 2d . Typical normalized light output vs . junction temperature for LXM5-PD01, LXM5-PH01 and LXM5-PL01 at test current. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 8

1.2 Lime (LXML-PX02) 1.1 x u Fl us 1.0 o n mi u L e v0.9 ati el R 0.8 0.7 25 50 75 100 125 150 Thermal Pad Temperature (°C) Figure 2e. Typical normalized light output vs. junction temperature for LXML-PX02 at test current. Forward Current Characteristics 1000 ES Royal Blue and ES Blue (LXML- Px02) 800 A) Green, Cyan, Blue and Royal Blue m (LXML-Px01) ent ( 600 Lime (LXML-PX02) r r u C d r wa 400 r o F 200 0 2.3 2.5 2.7 2.9 3.1 3.3 Forward Voltage (V) Figure 3a. Typical forward current vs. forward voltage for LXML-PX02, LXML-Px01 and LXML-Px02 at test temperature. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 9

1000 Red (LXM5-PD01), Red-Orange (LXM5-PH01) & Amber (LXM5-PL01) Red (LXML2-PD01) & Red Orange (LXM2-PH01) 900 Red (LXML-PD01), Red-Orange (LXML-PH01) & Amber (LXML-PL01) PC Amber (LXM2-PL01) 800 Far Red (LXML-PF01) Deep Red (LXM3-PD01) 700 A) m ( 600 nt e rr 500 u C d 400 r a w r 300 o F 200 100 0 1.6 2.1 2.6 3.1 3.6 Forward Voltage (V) Figure 3b. Typical forward current vs. forward voltage for LXML-PF01, LXM3-PD01, LXM2-PD01, LXM5-PD01, LXML-PD01, LXM2-PH01, LXM5-PH01, LXML-PH01, LXM2-PL01, LXM5-PL01 and LXML-PL01 at test temperature. 2 1.8 1.6 x u 1.4 Fl nt a 1.2 id a R 1 e v ati 0.8 el R LUXEON Rebel ES Royal Blue (LXML-PR02) 0.6 and ES Blue (LXML-PB02) 00.44 0.2 00 0 200 400 600 800 1000 1200 1400 1600 Forward Current (mA) Figure 3c. Relative luminous flux or radiometric power vs. forward current for LXML-PB02 and LXML-PR02 at test temperature. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 10

2.7 2.4 2.1 x u Fl 1.8 s u o n 1.5 mi u L e 1.2 v ati Rel 0.9 Blue (LXML-PB01) Royal Blue (LXML-PR01) 0.6 Green (LXML-PM01) 0.3 Lime (LXML-PX02) 0.0 0 200 400 600 800 1000 Forward Current (mA) Figure 3d. Relative luminous flux vs. forward current for LXML-PX02, LXML-PM01, LXML-PB01 and LXML-PR01 at test temperature. 2.00 1.75 x 1.50 u Fl s u 1.25 o n mi u 1.00 L d e z 0.75 ali m Red (LXM2-PD01) & Red-Orange (LXM2-PH01) r o 0.50 N Red (LXML-PD01), Red-Orange (LXML-PH01) & Amber (LXML-PL01) 0.25 Far Red (LXML-PF01) Deep Red (LXM3-PD01) 0.00 0 100 200 300 400 500 600 700 800 Forward Current (mA) Figure 3e. Normalized luminous flux or radiometric power vs. forward current for LXML-PF01, LXM3-PD01, LXM2-PD01, LXM5-PD01, LXML-PD01, LXM2-PH01, LXM5-PH01, LXML-PH01, LXM5-PL01 and LXML-PL01 at test temperature. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 11

2.00 1.75 1.50 x u Fl s 1.25 u o in mi 1.00 u L e v 00..7755 iati el R 0.50 PC Amber (LXM2-PL01) 0.25 00.0000 0 100 200 300 400 500 600 700 Forward Current (mA) Figure 3f. Relative luminous flux vs. forward current for LXM2-PL01 at test temperature. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 12

Radiation Pattern Characteristics 100% 90% 80% 7700%% % sity 60% nn e nt 50% e I ativ 40% LaUndX EEOS NB lRuee b(LeXl EMSL -RPoBy0a2l )Blue (LXML-PR02) el R 30% green LXML-PM01, cyan LXML-PE01, blue LXML-PB01 & royal blue LXML-PR01 2200%% 10% 0% -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 Angular Displacement (deg) Figure 4a. Typical radiation pattern for LXML-PM01, LXML-PE01, LXML-PB01, LXML-PB02, LXML-PR01 and LXML-PR02 at test conditions. 0° -30° 30° -60° 60° -1.0 -0.8 -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 0.8 1.0 LUXEON Rebel ES Royal Blue LXML-PR02 and ES Blue LXML-PB02 green LXML-PM01, cyan LXML-PE01, blue LXML-PB01 & royal blue LXML-PR01 Figure 5a. Typical polar radiation pattern for LXML-PM01, LXML-PE01, LXML-PB01, LXML-PB02, LXML-PR01 and LXML-PR02 at test conditions. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 13

100% 90% 80% 70% % y 60% sit n e nt 50% e I v ati 40% el RR 30% Red (LXM2-PD01, LXM5-PD01), Red-Orange (LXM2-PH01, LXM5-PH01) & Amber (LXM5-PL01) 20% red LXML-PD01, red-orange LXML-PH01 & amber LXML-PL01 10% 0% -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 Angular Displacement deg Figure 4b. Typical radiation pattern for LXM2-PD01, LXM5-PD01, LXML-PD01, LXM2-PH01, LXM5-PH01, LXML-PH01, LXM5-PL01 and LXML-PL01 at test conditions. 0° ‐30° 30° ‐60° 60° ‐1.0 ‐0.8 ‐0.6 ‐0.4 ‐0.2 0.0 0.2 0.4 0.6 0.8 1.0 red LXM2‐PD01 & red‐orange LXM2‐PH01 red LXML‐PD01, red‐orange  LXML‐PH01 & amber LXML‐PL01 Figure 5b. Typical polar radiation pattern for LXM2-PD01, LXML-PD01, LXM2-PH01, LXML-PH01 and LXML-PL01 at test conditions. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 14

Far Red (LXML-PF01) 100% 90% 80% 70% % y 60% sit n e nt 50% e I v elati 40% Far Red (LXML-PF01) R 30% 20% 10% 0% -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 Angular Displacement deg Figure 4c. Typical radiation pattern for LXML-PF01 at test conditions. 0° -30° 30° -60° 60° -1.0 -0.8 -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 0.8 1.0 Far Red (LXML-PF01) Figure 5c. Typical polar radiation pattern for LXML-PF01 at test conditions. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 15

120% 100% ) %% ( 8800%% y t si n e ntn 60% e I v ti a el 40% R 20% DDeeeeppRReedd((LLXXMM33--PPDD0011)) 0% -90 -60 -30 0 30 60 90 AAnngguullaarrDDiissppllaacceemmeenntt((ddeegg)) Figure 4d. Typical radiation pattern for LXM3-PD01 at test conditions. 0° 100 -30° 30° 80 60 -6600° 6600° 40 20 -90° 0 90° -120° Deep Red (LXM3-PD01) 120° --115500° 115500° 180° Figure 5d. Typical polar radiation pattern for LXM3-PD01 at test conditions. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 16

1111....2222 1111....0000 000...888 y y y sitsitsit nnn eee 000...666 ntntnt e Ie Ie I vvv atiatiati 000...444 lelel RR 00..22 00..00 --110000 --8800 --6600 --4400 --2200 00 2200 4400 6600 8800 110000 Angular Displacement (degrees) Figure 4e. Typical radiation pattern for LXM2-PL01 at test conditions. Figure 5e. Typical polar radiation pattern for LXM2-PL01 at test conditions. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 17

Product Bin and Labeling Definitions Decoding Product Bin Labeling In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or dominant wavelength and forward voltage. Reels of LUXEON Rebel Far Red, Deep Red, Red, Red-Orange, PC Amber, Amber, Green, Cyan, Blue and Royal Blue are labeled using a 3-digit alphanumeric CAT code following the format below: A B C Where: A – designates luminous flux or radiometric power bin (example: Deep Red D=300 to 350 lumens, Green K=70 to 80 lumens) B – designates peak or dominant wavelength bin (example: Green 2=525 to 530nm, Cyan 2=495 to 500nm) C – designates forward voltage bin (example: Far Red U=1.60 to 1.80V, Green B=2.55 to 2.79V) Therefore, LUXEON Rebel Green with a lumen range of 70 to 80, a dominant wavelength of 525 to 530nm and a forward voltage range of 2.55 to 2.79V has the following CAT code: K 2 B Reels of LUXEON Rebel Lime are labeled using a 4-digit alphanumeric CAT code following the format below: A B C D Where: A – designates luminous flux bin (example: F=150 to 160 lumens, J=180 to 190 lumens, M=210 to 220 lumens) B C – designates color bin (example: A0) D – designates forward voltage bin (example: P=2.60 to 2.75V, R=2.75 to 3.00V) Therefore, LUXEON Rebel Lime with a lumen range of 180 to 190, color bin A0 and a forward voltage range of 2.75 to 3.00V has the following CAT code: J A 0 R DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 18

Luminous Flux Bins Tables 5a and 5b list the standard luminous flux bins for LUXEON Rebel Color Line emitters. Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs. Table 5a. Luminous flux bin definitions for LUXEON Rebel Red, Red-Orange, PC Amber, Amber, Green, Cyan and Blue. lumInous FluX [1] (lm) BIn mInImum maXImum D 18 24 E 24 30 F 30 40 G 40 50 H 50 60 J 60 70 K 70 80 L 80 90 M 90 100 N 100 110 X 110 120 P 120 130 Y 130 140 Q 140 160 R 160 180 S 180 200 Notes for Table 5a: 1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements. 2. Tested and binned at test conditions. Table 5b. Luminous flux bin definitions for LUXEON Rebel Lime. lumInous FluX [1] (lm) BIn mInImum maXImum E 140 150 F 150 160 G 160 170 H 170 180 J 180 190 K 190 200 L 200 210 M 210 220 Notes for Table 5b: 1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements. 2. Tested and binned at test conditions. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 19

Radiometric Power Bins Table 6a. Radiometric power bin definitions for LUXEON Rebel Royal Blue. RadIomEtRIC PoWER [1] (mW) BIn mInImum maXImum D 350 425 E 425 500 F 500 600 G 600 700 H 700 800 J 800 900 K 900 950 Y 950 1000 A 1000 1050 B 1050 1100 M 1100 1200 N 1200 1300 P 1300 1400 Notes for Table 6a: 1. Lumileds maintains a tolerance of ±6.5% for radiometric power measurements. 2. Tested and binned at test conditions. Table 6b. Radiometric power bin definitions for LUXEON Rebel Far Red and Deep Red. RadIomEtRIC PoWER [1] (mW) BIn mInImum maXImum B 210 260 C 260 300 D 300 350 E 350 400 Notes for Table 6b: 1. Lumileds maintains a tolerance of ±6.5% for radiometric power measurements. 2. Tested and binned at test conditions. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 20

Dominant and Peak Wavelength Bins Table 7a. Dominant wavelength bin definitions for LUXEON Rebel Red, Red-Orange, Amber, Green, Cyan and Blue. domInant WaVElEnGtH [1] (nm) ColoR PaRt numBER BIn mInImum maXImum LXM2-PD01, LXM5-PD01 4 620 630 Red and LXML-PD01 5 630 645 LXM2-PH01, LXM5-PH01 Red-Orange 2 610 620 and LXML-PH01 1 585 587 LXM5-PL01 2 587 590 Amber and LXML-PL01 4 590 592 6 592 595 1 520 525 2 525 530 Green LXML-PM01 3 530 535 4 535 540 1 490 495 2 495 500 Cyan LXML-PE01 3 500 505 4 505 510 5 510 515 1 460 465 2 465 470 LXML-PB01 Blue 3 470 475 and LXML-PB02 4 475 480 5 480 485 Notes for Table 7a: 1. Lumileds maintains a tolerane of ±0.5nm for dominant wavelength measurements. Table 7b. Peak wavelength bin definitions for LUXEON Rebel Far Red, Deep Red and Royal Blue. PEaK WaVElEnGtH [1] (nm) ColoR PaRt numBER BIn mInImum maXImum 1 720 730 Far Red LXML-PF01 2 730 740 3 740 750 6 650 660 Deep Red LXM3-PD01 7 660 670 3 440 445 LXML-PR01 4 445 450 Royal Blue and LXML-PR02 5 450 455 6 455 460 Notes for Table 7b: 1. Lumileds maintains a tolerane of ±2nm for peak wavelength measurements. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 21

Color Bin Definitions 0.6 ES Lime PC Amber 0.55 y 0.5 0.45 0.4 0.36 0.41 0.46 0.51 0.56 0.61 x Figure 6 . Color bin structure for LUXEON Rebel PC Amber and Lime for Table 8 . Table 8. Peak wavelength bin definitions for LUXEON Rebel PC Amber and Lime. ColoR PaRt numBER BIn x y 0.5622 0.4372 0.5576 0.4326 PC Amber LXM2-PL01 2 0.5775 0.4132 0.5843 0.4151 0.3819 0.5055 0.4191 0.5790 Lime LXML-PX02 A0 0.4327 0.5655 0.3972 0.4986 Notes for Table 8: 1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 22

Forward Voltage Bins Table 9. Forward voltage bin definitions for LUXEON Rebel Color Line at test conditions. FoRWaRd VoltaGE [1] (V) PaRt numBER BIn f mInImum maXImum U 1.60 1.80 Far Red - LXML-PF01 V 1.80 2.00 Deep Red - LXM3-PD01 Red - LXM2-PD01 W 2.00 2.20 Red - LXM5-PD01 Red-Orange - LXM2-PH01 X 2.20 2.40 Red-Orange - LXM5-PH01 Amber - LXM5-PL01 Y 2.40 2.60 Z 2.60 2.80 P 2.60 2.75 Lime - LXML-PX02 R 2.75 3.00 Red - LXML-PD01 A 2.31 2.55 Red-Orange - LXML-PH01 PC Amber - LXM2-PL01 B 2.55 2.79 Amber - LXML-PL01 C 2.79 3.03 Green - LXML-PM01 Cyan - LXML-PE01 D 3.03 3.27 Blue - LXML-PB01 Royal Blue - LXML-PR01 E 3.27 3.51 P 2.50 2.75 R 2.75 3.00 ES Blue - LXML-PB02 ES Royal Blue - LXML-PR02 S 3.00 3.25 T 3.25 3.50 Notes for Table 9: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 23

Mechanical Dimensions 3.17 2.93 2.10 1.85 0.11 0.05 1.67 4.61 1.38 4.37 1.67 0.68 1.38 0.52 2.61 2.49 0.14 R 0.06 0.46 1.26 0.34 1.14 0.73 0.61 1.86 1.74 1.83 2.86 1.71 2.74 Figure 7a . Mechanical dimensions for LUXEON Rebel Color Line . Notes for Figure 7a: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 24

2.10 3.17 1.85 2.93 0.11 0.05 1.67 4.61 1.38 2.31 4.37 2.25 0.86 1.67 0.68 0.74 1.38 0.83 0.52 0.54 0.84 0.72 0.88 0.72 2.61 0.14 ∅ 2.49 R0.06 0.21 0.14 R0.09 R0.06 0.46 0.34 1.26 1.14 0.73 0.61 1.86 1.74 1.83 2.86 1.71 2.74 Figure 7b. Mechanical dimensions for LUXEON Rebel ES Blue and LUXEON Rebel ES Royal Blue. Notes for Figure 7b: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 25

Reflow Soldering Guidelines t T p p Critical Zone Ramp-up T to T L p T L t e L eratur Tsmax p m e T T smin Ramp-down t s Preheat Area 25 Time 25ºC to Peak Time JEDEC J-STD-020D Figure 8. Visualization of the acceptable reflow temperature profile as specified in Table 10. Table 10. Reflow profile characteristics for LUXEON Rebel Color Line. PRoFIlE FEatuRE lEad-FREE assEmBly Preheat Minimum Temperature (T ) 150°C smin Preheat Maximum Temperature (T ) 200°C smax Preheat Time (t to t ) 60 to 180 seconds smin smax Ramp-Up Rate (T to T) 3°C / second maximum L p Liquidus Temperature (T) 217°C L Time Maintained Above Temperature T (t) 60 to 150 seconds L L Peak / Classification Temperature (T) 260°C p Time Within 5°C of Actual Temperature (t) 20 to 40 seconds p Ramp-Down Rate (T to T) 6°C / second maximum p L Time 25°C to Peak Temperature 8 minutes maximum JEDEC Moisture Sensitivity Table 11 . Moisture sensitivity levels for LUXEON Rebel Color Line . FlooR lIFE soaK REquIREmEnts standaRd lEVEl tImE CondItIons tImE CondItIons 1 Unlimited ≤30°C / 85% RH 168 Hours +5 / -0 85°C / 85% RH DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 26

Solder Pad Design PAD FUNCTION 3 3 1 CATHODE 2 ANODE 1 2 2 1 3 THERMAL TOP BOTTOM Figure 9a. LUXEON Rebel Color Line pad configuration. Notes for Figure 9a: 1. The Thermal Pad is electrically isolated from the Anode and Cathode contact pads. 2. Drawings are not to scale. Figure 9b . LUXEON Rebel Color Line solder pad design . Notes for Figure 9b: 3. The photograph shows the recommended LUXEON Rebel Color Portfolio layout on printed circuit board (PCB). This design easily achieves a thermal resistance of 7K/W. 4. Drawings are not to scale. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 27

Packaging Information Pocket Tape Dimensions 20 1000 50 Figure 10 . Pocket tape dimensions for LUXEON Rebel Color Line . Notes for Figure 10: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 28

Reel Dimensions Figure 11 . Reel dimensions for LUXEON Rebel Color Line . Notes for Figure 11: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved. 29

About Lumileds Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation, quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is making the world safer, better and more beautiful—with light. To learn more about our lighting solutions, visit lumileds.com. ©2017 Lumileds Holding B.V. All rights reserved. Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, LUXEON is a registered trademark of the Lumileds direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. in the United States and other countries. Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates lumileds.com warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. A listing of Lumileds product/patent coverage may be accessed at lumileds.com/patents. DS68 LUXEON Rebel Color Line Product Datasheet 20171106