Illum InatIon For neW designs consider these replacement products: • LUXEON TX r • LUXEON C Royal Blue • LUXEON CZ Royal Blue luXeon t e e A bright, versatile and high efficacy emitgter L LUXEON T is designed to deliver high efficacy with high flux Ndensity to b enable tight beam control in directional and high lumen applications. With Freedom from Binning and leading performance, LUXEON T LEDs o a are specified, targeted and tested hot, at real world operating temperatures, 85°C, to ensure in-application performance. LUXEON T LEDs allow system r optimization by blending the perfect combination of high efficacy and L low system cost, while tight correlated color temperature ensures consistency in system color p oint. e o d N r Features and BeneFIts PrImary aPPlIcatIons 3 & 5-step MacAdam ellipose: Freedom from Binning for superior Downlights Quality of Light Low V and thermal resistance enables smaller heatsinks and higher lumens High Bay & Low Bay f High luminance and small optical source for precise beam control in Indoor Area Lighting directional applications Superior efficacy and light output from a compact source Lamps Outdoor RoHS COMPLIANT No. E352519 DS106 LUXEON T Product Datasheet ©2019 Lumileds Holding B.V. All rights reserved.

Table of Contents General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Product Test Conditions.............................................................................. 2 Part Number Nomenclature .......................................................................... 2 r Lumen Maintenance................................................................................. 2 Environmental Compliance ........................................................................... 2 Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .e . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Product Selection Guide..................................................................e............ 3 Optical Characteristics ............................................................................... 3 g Electrical and Thermal Characteristics...............................................L................... 4 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N . . . . . . . . . . . . . . . . . . . . .b . . . . . . . . . . . . . . . . . . . . . . . .5 Spectral Power Distribution Characteristics............................................................. 5 Light Output Characteristics .......................................................................... 7 Forward Current Characteristics.............o.......................a................................... 8 Radiation Pattern Characteristics...................................................................... 9 Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 r Decoding Product Bin Labeling.......................................................................10 L Luminous Flux Bins.................................................................................11 Radiometric Power Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 e Color Bin Definition.................................................................................12 Peak Wavelength Binos...............................................................................13 Forward Voltage Bins .................d..............................................................13 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Reflow SoldNering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Solder Pad Design..........r........................................................................16 Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Pocket Tape Dimensions ............................................................................17 o Reel Dimensions ...................................................................................18 DS106 LUXEON T Product Datasheet 20191029 ©2019 Lumileds Holding B.V. All rights reserved. i

General Product Information Product Test Conditions LUXEON T LEDs are tested and binned with a DC drive current of 700mA at a junction temperature, T, of 85ºC. j r Part Number Nomenclature Part numbers for LUXEON T follow the convention below: e e L X H A – F W B B – C and L X H A – F W B B – D D D D g L Where: A – designates minimum CRI performance (7=70CRI, 8=80CRI, 9=90CRI and I for Royal Blue) N b B B – designates nominal ANSI CCT (27=2700K, 30=3000K and RB for Royal Blue) C – designates color defintion (3=3 SDCM and 5=5 SDCM) o a D D D D – designates minimum luminious flux output (1000=1000mW) Therefore, the following part number is used for a LUXEON T White 3-step MacAdam ellipse, 3000K 80CRI: r L L X H 8 – F W 3 0 – 3 and Therefore, the following part num ber is used for a LUXEON Te Royal Blue with a minimum radiometric power of 1000mA: o L X H 1 – F W R B – 1 0 0 0 d Lumen Maintenance N Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long- r term performance of this product. o Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON T is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). DS106 LUXEON T Product Datasheet 20191029 ©2019 Lumileds Holding B.V. All rights reserved. 2

Performance Characteristics Product Selection Guide Table 1a. Product performance of LUXEON T white at 700mA and 350mA, T=85ºC . j r lumInous FluX [2] (lm) tyPIcal tyPIcal tyPIcal nomInal mInImum lumInous lumInous lumInous cct crI [1] mInImum tyPIcal eFFIcacy (lm/W) FluX (lm) eFFIcacy (lm/W) Part numBer 700ma 350ma e 3000K 70 200 218 111 117 123 LXH7-FW30 e 4000K 70 210 249 127 133 140 LXH7-FW40 5000K 70 220 255 130 136 143 LXH7-FW50 g 5700K 70 220 255 130 136 143 L LXH7-FW57 6500K 70 220 255 130 136 143 LXH7-FW65 2700K 80 170 186 95 100 105 LXH8-FW27-x N b 3000K 80 180 197 101 106 112 LXH8-FW30-x 3500K 80 190 208 106 112 118 LXH8-FW35-x 4000K 80 190 212 108 114 120 LXH8-FW40-x 5000K 80 190 222 o 113 1a20 127 LXH8-FW50-x 3000K 95 typ 130 160 82 86 91 LXH9-FW30-x Notes for Table 1a: 1. Lumileds maintains a tolerance of ±2 on CRI. 2. Lumileds maintains a tester tolerance of ±6.5% on luminous flux measurements. r L Table 1b. Product performance for LUXEON T Royal Blue at 700mA, T=85°C . j Peak WaVelenGtH (nm) radIometrIc PoWer (mW) e Part numBer mInImum maXImum mInImum tyPIcal 445 460 950 1040 LXH1-FWRB o Notes for Table 1b: 1. Lumileds maintains a tolerance of ±2nm on peak wavelength measuremdents. Optical Characteristics N r Table 2 . Optical characteristics for LUXEON T at 700mA . Part numBer tyPIcal total Included anGle [1] tyPIcal VIeWInG anGle [2] LXH7-FWxx o 160° 120° LXHx-FWxx-x 160° 120° LXH1-FWRB 160° 120° Notes for Table 2: 1. Total angle at which 90% of total luminous flux is captured. 2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value. DS106 LUXEON T Product Datasheet 20191029 ©2019 Lumileds Holding B.V. All rights reserved. 3

Electrical and Thermal Characteristics Table 3. Electrical and thermal characteristics for LUXEON T at 700mA, T=85ºC . j ForWard VoltaGe (V) [1] tyPIcal temPerature tyPIcal tHermal Part numBer coeFFIcIent oF ForWard resIstance — JunctIon mInImum tyPIcal maXImum VoltaGe (mV/°c) [2] to solder Pad (°c/W) LXH7-FWxx 2.50 2.80 3.25 -1.60 3.00 r LXH8-FWxx-x 2.50 2.80 3.25 -1.60 3.00 LXH1-FWRB 2.50 2.80 3.25 -1.60 3.00 Notes for Table 3: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. e e g Absolute Maximum Ratings L N b Table 4. Absolute maximum ratings for LUXEON T, T=85ºC . j Parameter maXImum PerFormance DC Forward Current [1, 2] 1050mA o a Peak Pulsed Forward Current [1, 3] 1200mA LED Junction Temperature [1] (DC & Pulse) 150°C ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class B r Operating Case Temperature [1] -40°C to 135°C L LED Storage Temperature -40°C to 135°C Soldering Temperature JEDEC 020c 260°C Allowable Refl ow Cycles e 3 Reverse Voltage [4, 5] (V ) LUXEON LEDs are not designed to be driven in reverse bias o reverse Notes for 4: 1. Proper current derating must be observed to maintain junction temperature below the maximum. For additional information on thermal measurement guidelines please refer to Application Brief AB106. d 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple”, with frequencies ≥100 Hz and amplitude ≤150mA are acceptable, assuming the average current throughout each cycle does not exceed the maximum allowable DC Forward Current at the corresponding maximum junction temperature. 3. Pulsed operation with a peak drive current equal to the stated Peak Pulsed Forward Current is acceptable if the pulse on-time is ≤5ms per cycle and the duty cycle is ≤50%. 4. Transient reverse voltages and surge currents due to electrical switching or supply interruptions are acceptable if these events do not last for more than 10ms, the amplitude of the reverse voltage does not eNxceed 5V and the reverse current is less than 220uA. 5. Max 5V reverse for up to 10s is an acceptable beginning of life, one time test condition. r o DS106 LUXEON T Product Datasheet 20191029 ©2019 Lumileds Holding B.V. All rights reserved. 4

Characteristic Curves Spectral Power Distribution Characteristics r e e g L N b o a r L Figure 1a: Typical normalized power vs. wavelength for LXH7-FWxx at 700mA, T=85ºC . j e o d N r o Figure 1b: Typical normalized power vs. wavelength for LXH8-FWxx at 700mA, T=85ºC . j DS106 LUXEON T Product Datasheet 20191029 ©2019 Lumileds Holding B.V. All rights reserved. 5

r e e g L N b Figure 1c: Typical normalized powoer vs. wavelength for LXH7-FaWxx at 700mA, T=85ºC . j r L e o d N r o Figure 1d: Typical normalized power vs. wavelength for LXHx-FWRB at 700mA. DS106 LUXEON T Product Datasheet 20191029 ©2019 Lumileds Holding B.V. All rights reserved. 6

Light Output Characteristics r e e g L N b o a Figure 2a: Typical normalized light output vs. junction temperature for LXFx-FWxx at 700mA . r L e o d N r o Figure 2b: Typical normalized light output vs. forward current for LXFx-FWxx at T=85°C . j DS106 LUXEON T Product Datasheet 20191029 ©2019 Lumileds Holding B.V. All rights reserved. 7

Forward Current Characteristics r e e g L N b o a Figure 3a: Typical forward current vs. forward voltage for LXHx-FWxx at T=85°C . j r L e o d N r o DS106 LUXEON T Product Datasheet 20191029 ©2019 Lumileds Holding B.V. All rights reserved. 8

Radiation Pattern Characteristics r e e g L N b o a Figure 4a: Typical radiation pattern for LXHx-FWxx at 700mA, T=85ºC . j r L e o d N r o Figure 4b: Typical polar radiation pattern for LXHx-FWxx at 700mA, T=85ºC . j DS106 LUXEON T Product Datasheet 20191029 ©2019 Lumileds Holding B.V. All rights reserved. 9

Product Bin and Labeling Definitions Decoding Product Bin Labeling In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or r dominant wavelength and forward voltage. LUXEON T LEDs are labeled using a 4-digit alphanumeric CAT code following the format below: e A B C D e A – designates luminous flux or radiometric power bin (example: M=210 to 220 lumens, R=250 to 260 lumens) g L B – designates correlated color temperature bin (0=Royal Blue, 1=6500K, 2=5700K, 3=5000K, 5=4000K, 6=3500K, 7=3000K, 8=2700K) N b C – designates SDCM or peak wavelength bin (3=3-step MacAdam ellipse, 4=445 to 450nm, 5=450 to 455nm or 5-step MacAdam ellipse, 6=455 to 460nm, A, B, C or D=5-step specified bin) D – designates forward voltage bin (exampole: P=2.50 to 2.75V, S=3.00 ato 3.25V) Therefore, a LUXEON T with a lumen range of 210 to 220, color bin of 7 designating 3000K parts, 3-step MacAdam ellipse 80CRI r and a forward voltage range of 2.50 to 2.75V has the following CAT code: L M 7 3 P e o d N r o DS106 LUXEON T Product Datasheet 20191029 ©2019 Lumileds Holding B.V. All rights reserved. 10

Luminous Flux Bins Table 5 lists the standard photometric luminous flux bins for LUXEON T emitters. Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs. Table 5. Luminous flux bin definitions for LUXEON T. lumInous FluX (lm) r BIn mInImum maXImum C 120 130 D 130 140 e E 140 150 e F 150 160 G 160 170 g H 170 L180 J 180 190 K 190 200 N b L 200 210 M 210 220 N 220 230 o a P 230 240 Q 240 250 R 250 260 S 260 r 270 L T 270 280 U 280 290 V 290e 300 Notes for Table 5: 1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements. o d Radiometric Power Bins Table 6. RadiomNetric power bins for LUXEON T Royal Blue. r radIometrIc PoWer (mW) BIn code mInImum maXImum A 950 1000 o B 1000 1050 C 1050 1100 D 1100 1150 E 1150 1200 F 1200 1250 Notes for Table 6: 1. Lumileds maintains a tolerance of ±6.5% on radiometric tolerance measurements. DS106 LUXEON T Product Datasheet 20191029 ©2019 Lumileds Holding B.V. All rights reserved. 11

Color Bin Definition 0.430 NOTE:Color bin space illustration for 2700K, 3000K & 3500K. 0.425 For CCT above 4000K, the ellipse centers are all above BBL line. 0.420 Bin 5A r y 0.415 Bin 5D 31 Bin 3 9 0.410 1 E CI Bin 5B 0.405 e Bin 5C e 0.400 0.395 g L 0.390 0.445 0.450 0.455 0.460 0.465 0.470 0.475 CIE 1931 x N b Figure 5: Color space definition for LUXEON T. Figure 6: 3- and 5-step MacAdam ellipse illustration for Table 7. o a Table 7. 3- and 5-step MacAdam ellipse color bin definitions for LUXEON T. center PoInt maJor aXIs, mInor aXIs, ellIPse rotatIon nomInal cct color sPace (cx, cy) a b Angle, Θ 2700K Single 3-step MacAdam ellipse (0.4578, 0.4101) r0.00810 0.00420 53.70° L 3000K Single 3-step MacAdam ellipse (0.4338, 0.4030) 0.00834 0.00408 53.20° 3500K Single 3-step MacAdam ellipse (0.4073, 0.3917) 0.00927 0.00414 54.00° 4000K Single 3-step M acAdam ellipse (0.3818, e0.3797) 0.00939 0.00402 53.70° 5000K Single 3-step MacAdam ellipse (0.3447, 0.3553) 0.00822 0.00354 59.60° 2700K Single 5-ostep MacAdam ellipse (0.4578, 0.4101) 0.01350 0.00700 53.70° 3000K Single 5-step MacAdam ellipse d(0.4338, 0.4030) 0.01390 0.00680 53.20° 3500K Single 5-step MacAdam ellipse (0.4073, 0.3917) 0.01545 0.00690 54.00° 4000K Single 5-step MacAdam ellipse (0.3818, 0.3797) 0.01565 0.00670 53.70° N 5000K Single 5-step MacAdam ellipse (0.3447, 0.3553) 0.01370 0.00590 59.60° r 5700K Single 5-step MacAdam ellipse (0.3287, 0.3417) 0.01243 0.00533 59.09° 6500K Single 5-step MacAdam ellipse (0.3123, 0.3282) 0.01115 0.00475 58.57° Notes for Table 7: 1. Lumileds maintains a tolerance of ±0.0o05 on x and y color coordinates in the CIE 1932 color space. Table 8. Correlated color temperature bin definitions for LUXEON T. BIn cct 0 Royal Blue 1 6500K 2 5700K 3 5000K 5 4000K 6 3500K 7 3000K 8 2700K DS106 LUXEON T Product Datasheet 20191029 ©2019 Lumileds Holding B.V. All rights reserved. 12

Table 9. MacAdam ellipse color bin definitions for LXHx-FWxx (white). BIn sdcm or WaVelenGtH (nm) 3 3-step MacAdam ellipse 5 5-step MacAdam ellipse A 5-step MacAdam ellipse B 5-step MacAdam ellipse C 5-step MacAdam ellipse r D 5-step MacAdam ellipse e Peak Wavelength Bins e Table 10. Peak wavelength bins for LXHx-FWRB at 700mA, T=85ºC . g j L Peak WaVelenGtH (nm) [1] BIn mInImum maXImum 4 445 N b 450 5 450 455 6 455 460 Notes for Table 10: 1. Lumileds maintains a tolerance of ±2nm on peak wavelength measurements. o a Forward Voltage Bins r L Table 11. Forward voltage bin definitions for LUXEON T. ForWard VoltaGe (V) [1] BIn mInImuem maXImum P 2.50 2.75 o R 2.75 3.00 S d 3.00 3.25 X 2.65 2.85 Y 2.85 3.00 N Notes for Table 11: 1. Lumileds maintains a tolerance of ±0.06V on forwardr voltage measurements. o DS106 LUXEON T Product Datasheet 20191029 ©2019 Lumileds Holding B.V. All rights reserved. 13

Mechanical Dimensions r e e g L N b Figure 7: Mechaonical dimensions for LUXEOaN T . Notes for Figure 7: 1. Drawings are not to scale. 2. All dimensions are in millimeters. r 3. Do not handle the device by the dome. Excessive force on the dome may damage the dome itself or the interior of the device. L e o d N r o DS106 LUXEON T Product Datasheet 20191029 ©2019 Lumileds Holding B.V. All rights reserved. 14

Reflow Soldering Guidelines t T p p Critica l Zone Ramp-up T to T rL p T L t e L eratur Tsmax p m e e T T e smin Ramp-down t s Preheat Area g L 25 Time 25ºC to Peak N b Time JEDEC J-STD-020D Figure 8: Visualization of the acceptable reflow temperature profile as specified in Table 12. o a Table 12. Reflow profile characteristics for LUXEON T. ProFIle Feature lead-Free assemBly r Preheat Minimum TemperatureL (T ) 150°C smin Preheat Maximum Temperature (T ) 200°C smax Preheat Time (t to t ) 60 to 120 seconds smin smax e Ramp-Up Rate (T to T) 3°C / second maximum smax p Liquidouos Temperature (T) 217°C L Time Maintained Above Temperature TL (tL)d 60 to 150 seconds Peak / Classification Temperature (T) 260°C p Time Within 5°C of Actual Peak Temperature (t) 20 to 40 seconds p N Ramp-Down Rate 6°C / second maximum r Time 25°C to Peak Temperature 8 minutes maximum JEDEC Moisture Soensitivity Table 13 . Moisture sensitivity levels for LUXEON T . Floor lIFe soak requIrements standard leVel tIme condItIons tIme condItIons 1 Unlimited ≤30°C / 85% RH 168 Hours +5 / -0 85°C / 85% RH DS106 LUXEON T Product Datasheet 20191029 ©2019 Lumileds Holding B.V. All rights reserved. 15

Solder Pad Design r e e g L N b o a r L Figure 9: Recommended PCB solder pad layout for LUXEON T . Notes for Figure 9: e 1. Drawings are not to scale. 2. All dimensions are in millimeters. o d N r o DS106 LUXEON T Product Datasheet 20191029 ©2019 Lumileds Holding B.V. All rights reserved. 16

Packaging Information Pocket Tape Dimensions -LEADER- 400mm MIN OF COVER TAPE -TRAILER- MIN 100mm CARRIER TAPE WITH EMPTY -LOADED POCKETS- 100mm rMIN OF EMPTY CARRIER POCKETS SEALED WITH COVER TAPE TAPE SEALED WITH COVER TAPE e J e g L DIRECTION OF FEED N b 1.00±0.05 E G 8.00±0.10 E 12.00+-00..3100 o a H L 1.75±0.10 r SESCCTAIOLEN 2 G : -1G GL 1.50 2.00±0.05 5.50±0.05 4.00±0.10 F e o SECTION E-E SCALE 2 : 1 d 2.40 N r 3.95±0.10 3.95±0.10 0.29±0.02 o 2.40±0.10 3.00±0.10 DETAIL H SCALE 6 : 1 DETAIL F 8 MAX SCALE 6 : 1 12 MAX Figure 10: Packaging dimensions for LUXEON T . Notes for Figure 10: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS106 LUXEON T Product Datasheet 20191029 ©2019 Lumileds Holding B.V. All rights reserved. 17

Reel Dimensions 1.37 -DEVICE OREINTATION- NON-FIDUCIAL CORNER LOCATED AS SHOWN 1.53 r R0.50 DETAIL J 2.52e SCALE 6 : 1 e DETAIL L SCALE 6 : 1 16.8mm OUTSIDE WIDTH g 12.4mm INSIDE WIDTH L N b o a r L e 330.00 REEL DIAMETER o d13.00mm ARBOR HOLE DIAMETER N r COVER TAPE DIRECTION OF FEED o CARRIER TAPE TAPE REEL Figure 11: Reel dimensions for LUXEON T . Notes for Figure 11: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS106 LUXEON T Product Datasheet 20191029 ©2019 Lumileds Holding B.V. All rights reserved. 18

About Lumileds Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collabo rate with them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lum ileds builds innovation, quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is r making the world better, safer, more beautiful—with light. To learn more about our lighting solutions, visit lumileds.com. e e g L N b o a r L e o d N r o ©2019 Lumileds Holding B.V. All rights reserved. Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, LUXEON is a registered trademark of the Lumileds direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. in the United States and other countries. Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates lumileds.com warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. A listing of Lumileds product/patent coverage may be accessed at lumileds.com/patents. DS106 LUXEON T Product Datasheet 20191029

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: L umileds: LXH9-FW27-5 LXH8-FW35-3 LXH7-FW50 LXH7-FW40 LXH9-FW30-5 LXH8-FW35-5 LXH9-FW30-3 LXH9- FW27-3 LXH7-FW65 LXH1-FWRB LXH7-FW57 LXH7-FW30 LXH8-FW27-5 LXH8-FW50-5 LXH8-FW40-3 LXH8- FW50-3 LXH8-FW30-3 LXH8-FW40-5 LXH8-FW30-5 LXH8-FW27-3