L I T E - O N E L E C T R O N I C S , I N C . Property of Lite-On Only Features * Dual color chip LED. * Ultra bright AlInGaP Chip LED. * Package in 8mm tape on 7" diameter reels. * Compatible with automatic placement equipment. * Compatible with infrared and vapor phase reflow solder process. * EIA STD package. * I.C. compatible. Package Dimensions Devices Part No. Lens Source Color Water Clear AlInGaP Green LTST-C195KGJRKT Water Clear AlInGaP Red Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1mm (.004") unless otherwise noted. Part No. : LTST-C195KGJRKT Page : 1 of 6 BNS-OD-C131/A4

L I T E - O N E L E C T R O N I C S , I N C . Property of Lite-On Only Absolute Maximum Ratings At Ta=25°C Parameter LTST-C195KGJRKT Unit Green Red Power Dissipation 75 75 mW Peak Forward Current 80 80 mA (1/10 Duty Cycle, 0.1ms Pulse Width) Continuous Forward Current 30 30 mA Derating Linear From 25°C 0.4 0.4 mA/°C Reverse Voltage 5 5 V Operating Temperature Range -55°C to + 85°C Storage Temperature Range -55°C to + 85°C Wave Soldering Condition 260°C For 5 Seconds Infrared Soldering Condition 260°C For 5 Seconds Vapor Phase Soldering Condition 215°C For 3 Minutes Suggest IR Reflow Condition : Part No. : LTST-C195KGJRKT Page : 2 of 6 BNS-OD-C131/A4

L I T E - O N E L E C T R O N I C S , I N C . Property of Lite-On Only Electrical / Optical Characteristics At Ta=25°C LTST-C195KGJRKT Parameter Symbol Unit Test Condition Green Red MIN. 20.0 15.0 Luminous IF = 20mA IV TYP. 35.0 25.0 mcd Intensity Note 1 MAX. Viewing Angle 2θ1/2 TYP. 130 130 deg Note 2 (Fig.6) Measurement Peak Emission λP TYP. 574 639 nm @Peak (Fig.1) Wavelength Dominant λd TYP. 571 631 nm Note 3 Wavelength Spectral Line ∆λ TYP. 15 20 nm Half-Width Forward TYP. 2.0 2.0 VF V IF = 20mA Voltage MAX. 2.4 2.4 Reverse IR MAX. 100 100 µA VR = 5V Current Capacitance C TYP. 40 40 PF VF=0, f=1MHZ Notes: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. Part No. : LTST-C195KGJRKT Page : 3 of 6 BNS-OD-C131/A4

L I T E - O N E L E C T R O N I C S , I N C . Property of Lite-On Only Typical Electrical / Optical Characteristics Curves (25°C Ambient Temperature Unless Otherwise Noted) Part No. : LTST-C195KGJRKT Page : 4 of 6 BNS-OD-C131/A4

L I T E - O N E L E C T R O N I C S , I N C . Property of Lite-On Only Cleaning Do not use unspecified chemical liquid to clean LED they could harm the package. If clean is necessary, immerse the LED in ethyl alcohol or in isopropyl alcohol at normal temperature for less one minute. Suggest Soldering Pad Dimensions Package Dimensions Of Tape And Reel Notes: 1. All dimensions are in millimeters (inches). Part No. : LTST-C195KGJRKT Page : 5 of 6 BNS-OD-C131/A4

L I T E - O N E L E C T R O N I C S , I N C . Property of Lite-On Only Notes: 1. Empty component pockets sealed with top cover tape. 2. 7 inch reel-4000 pieces per reel. 3. The maximum number of consecutive missing lamps is two. 4. In accordance with ANSI/EIA 481-1-A-1994 specifications. Part No. : LTST-C195KGJRKT Page : 6 of 6 BNS-OD-C131/A4