MICRO SWITCH Heavy-Duty Limit Switch 002345 HDLS Series Issue 10 Datasheet FEATURES • NEMA 1, 3, 4, 4X, 6, 6P, 12, 13 and IP65/66/67 environmental sealing • NEMA/IP sealing features twin shaft seals for an extra measure of protection • Rugged, corrosion-resistant zinc head and body are phosphate treated and epoxy coated • Diaphragm seal between head and body provides an extra measure of protection • Multiple connectivity options for international applications • Fluorosilicone seals available for low temperature applications, and fluorocarbon seals available for chemically harsh environments and higher temperature applications • Secure head-to-body retention with the head in any one of four positions 90° apart DESCRIPTION • Self-lifting pressure plate terminals saves wiring time Honeywell’s MICRO SWITCH heavy-duty limit switches’ • Wide variety of actuators, switch options, and head styles modular construction allows for a wide variety of actuator • Rotary actuated heads are field adjustable for CW actuation, styles, operating heads, and electrical circuitry options. The CCW actuation, or both plug-in versions greatly reduce downtime on production lines • Silver or gold-plated contacts with high actuation rates as replacement of the switch is • Plug-in and non plug-in bodies have identical operating accomplished in seconds. The base receptacle contains all the characteristics and are dimensionally interchangeable wiring and conduit connection while the switching component with operating head easily assembles to the base and is POTENTIAL APPLICATIONS attached with two screws. • Machine tools They are ideal for many applications with demanding indoor • Automotive machine tools and/or outdoor environments, where they may be subjected • Material handling to shock or vibration from equipment, temperature extremes, • Outdoor electromechanical structures dust, splashing water, coolant, and/or hose-directed water. • Balers/compactors • Conveyors DIFFERENTIATION • Food and beverage • Sintered bronze bearing on 303 stainless steel operating • Power plants shaft for enhanced mechanical life (up to 50 million • Off-road equipment actuation cycles) and operational reliability • Agricultural equipment • All-metal drive train for consistent operating characteristics, • Valves even at high temperature. Lasts longer (without need for • Transportation hubs frequent adjustment) than drive trains with plastic parts PORTFOLIO • Exclusive teller tab ensures proper torque. When it cannot be moved, the lever is tight enough to prevent slippage The heavy-duty HDLS Series limit switch is part of Honeywell’s comprehensive and broad limit switch portfolio that includes VALUE TO CUSTOMERS global, medium-duty, compact, hazardous area, and specialty • NEMA 1, 3, 4, 4X, 6, 6P, 12, 13 and IP65/66/67 limit switches. To view the entire product portfolio, click here. environmental sealing for demanding applications • Industry-leading breadth-of-product offering: HDLS standard, HDLS harsh-duty epoxy sealed, or the HDLS stainless steel • UL, CSA, CE, and CCC approvals for global use • Configurable product platform for design versatility • Large, existing installation base and channel allows for quick delivery worldwide Sensing and Internet of Things

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Figure 1. MICRO SWITCH HDLS Series Features and Options 303 stainless steel operating shaft on sintered bronze bearing for enhanced mechanical life and operational reliability. Field adjustable operating head (CW and CCW, CW or CCW) matches switch to the application. Tracking interchangeability of actuator levers for single- Twin shaft seals for an and double-pole switches, extra measure of plug-in and non-plug-in. protection. Optional fluorocarbon or fluorosilicone seals. Dual bearings deliver enhanced mechanical life. Exclusive teller tab ensures proper torque. When it cannot be moved, the lever is tight enough to prevent slippage. Boss-and-socket head design for secure head-to-body retention. Superior design of plug-in terminal between switch body and receptacle maintains electrical continuity in harsh conditions Diaphragm seal of temperature extremes, for exta measure equipment vibration, and shock. of protection. Unique, all-metal drive Self-lifting pressure train for consistent operating plate terminals save characteristics even at high Rugged, corrosion- wiring time. temperature; lasts longer resistant zinc head and (without the need for body are phosphate frequent adjustment) than Easily identified treated and epoxy drive trains with plastic parts. grounding terminal coated. (inside) for compliance with regulatory standards. One piece flat gasket: seals better than gaskets that go around curves and corners. Does not contact the terminals pins to reduce possibility of fluid migration. Front mounting and interchangeability of single- and double-pole switches, Domestic and international plug-in and non-plug-in with one another and with other switch brands. conduit threads. Each switch has four mounting holes; two “through” holes for front mount, and two tapped holes in back for rear mount 2 sensing.honeywell.com

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Table 1. Specifications Characteristic Parameter Product type MICRO SWITCH heavy-duty limit switches Certifications UL, CE, CSA, CCC Reference standards UL508, CSA 22.2 #14, EN/IEC60947-5-1, GB 14048.5 Housing material Electrostatic epoxy coated zinc Housing type HDLS Plug-in, HDLS Non-Plug-in Side plunger - adjustable Side plunger - pin Side plunger maintained - pin Side roller plunger Side rotary Side rotary maintained Acutators/heads Top plunger - adjustable Top plunger - pin Top roller plunger Top rotary Wobble - cable Wobble - cat whisker Wobble - coil spring Wobble - plastic rod Wobble - spring wire 1NC 1NO SPDT snap action, double break 2NC 2NO DPDT center neutral, snap action, double break Circuitry 2NC 2NO DPDT snap action, double break 2NC 2NO DPDT sequential, snap action, double break 0.5 in - 14NPT conduit 0.75 in - 14NPT conduit 12 ft cable, 6 ft cable PG 13,5 conduit 20 mm conduit 4-pin micro-style connector Termination types 4-pin mini-style connector 5-pin mini-style connector 9-pin mini-style connector Manifold mounting Contact type Snap action double break (form Za) same polarity each pole Contact material Silver alloy (standard), optional gold-plated (low energy applications) Utilization category AC-15, A600; DC-13, R300 (electrical ratings on page 5) Rated operational voltage (Ue) 600 Vac, 250 Vdc Rated operational current (Ie) 1.2 A, 0.1 A Rated thermal current 10 A, 2.5 A Rated insulation voltage 600 V Rated impulse withstand volt- 2500 V age (Uimp) Short circuit protection device Class J fuse, rated 10 A, 600 V (SCPD) type and rating Pollution degree 3 Sealing IP65/66/67; NEMA 1, 3, 4, 4X, 6, 6P, 12, 13 Operating temperature1 -12°C to 121°C [10°F to 250°F]; optional: -40°C to 121°C [-40°F to 250 ’F] Vibration 10 g conforming to IEC 60068-2-6 Shock (actuator not fitted) 50 g conforming to IEC 60068-2-27 UNSPSC code 302119 UNSPSC commodity 302119 Switches and controls and relays 1 Reference page 8 for additional temperature detail. Sensing and Internet of Things 3

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Figure 2. Product Nomenclature • Standard LS A 1A 1 – Contact Block and Housing Style Switch Type Heads (with integral conduit) Modification Codes Wobble Actuator HDLS Series A SCiWde a rnodta CryC,W, 1NC/1NO 2NC/2NO 2NC/2NO A 4-pin Heavy-Duty momentary Plug-in Housing Plug-in Housing Non-Plug-in Housing mini-style J-style Wobbles Limit Switch B Tmoopm roetnatrayr,y 1A S0t.5a-n1d4a rNdP cTont., 2B S0t.7a5n-d1a4rd N cPoTnt., 4L S0t.7a5n-d1a4rd N cPoTnt., B 5m-ipniin-s tyle 7A P1[54la.50s timnic]m ro d, C Tmoopm peinn tpalruynger, 1E G0.o5l-d1 c4o NnPtaTcts, 2C Ss0t.e7aqn5ud-e1an4rtd iNa clPo,Tnt., 4MSs0t.e7aqn5ud-e1an4rtd iNa clPo, Tnt., C 5S6T- fcOtoWnd-Au cctaobrl e, 7MS(33p30r0i2n m Sgm SwT i[r)1e3 in] Top roller Standard cont., Center neutral, Center neutral, 4-conductor Coil spring D pmluonmgeenr,t ary 1F manifold mount 2D s0t.7an5d-1a4rd N cPoTnt., 4N s0t.7an5d-1a4rd N cPoTnt., E S6J fTtOW-A cable, 7N (134002 m SmST [)5.5 in] E Smidoem peinnt aprluynger, 1H Sl0ot.5wa-n f1od4rac rNedP, cSTo onrt .T, , 2F Smmtaoanunindfotalrdd cont., 4S G0.o7l5d- c1o4n NtaPcTts, J 8m-ipniin-s tyle K-style Wobbles Side roller Standard cont., Standard cont., Sequential, 9-conductor Cat whisker, Optional Conduit F plunger, 5A 120 V neon, 2R 120 V neon, 4T gold contacts, M STOOW-A cable, 8A spring (302 SST) momentary 0.5-14 NPT 0.75-14 NPT 0.75-14 NPT 6 ft 140 mm [5.5 in] 3 PG 13,5 H Smidoem reont.t,a CryW, l/oCwC W 8A S2t4a0n Vd anredo cnont., 2S G0.o7l5d- c1o4n NtaPcTts, 4U Cgoelndt ecro nnetaucttras,l , P 5ST-cOoOnWdu-cAt coarble, 8B C(3o0il2 s SpSriTn)g pretravel & torque indicator 0.75-14 NPT 12 ft 190 mm [7.5 in] 4 20 mm J Wstiocbkble 9A S2int4da Vinc daLatEorDdr cont., 2T Sg0o.e7qld5u -ce1on4nt iNtaalPc,Tts, 7L S0t.5a-n1d4a rNdP cTont., R 9m-ipniin-s tyle 8C C(134o00il2 sm SpmSriTn [)g5 .5 in] K Cwahtisker 1NC/1NO 2U Cg0o.e7lnd5t -ec1ro 4nn eNtauPctTtras,l , 7MSs0t.e5aqn-u1de4an rNtdiPa clTo,nt., S 5m-ipcirno -style L Sroetqaurye, nCtWial &, s CidCeW, Non-Plug-in Housing 6B S0t.5a-n1d4a rNdP cTont., 7N Csteanntdear rnde cuotrnatl.,, X 9ST-cOoOnWdu-cAt coar ble, momentary 3K Standard cont., 0.5-14 NPT 12 ft M Csiednet reort naeryu, tCraWl, & 0.5-14 NPT 6C Ssteaqnudeanrtdia clo,nt., 7S Gold contacts, BB 3pi-gfotaoitl , mini-style CCW, momentary 0.5-14 NPT 0.5-14 NPT single pole Seal Options N SmCiCdaWien r t(o.t, trCaipWr)y, (reset), 6D Cs0t.e5ann-t1de4ar rnNdeP cuTotrnatl.,, 7T Sg0o.e5qld-u1 ce4on NntitPaalTc,ts, DD 4w-itphin ju mmicpreor-style Insert Y for Side rotary, CW & Standard cont., Center neutral, 5-conductor Y seal option P CCW, momentary, 6R 120 V neon, 7U gold contacts, PA STOOW-A cable, B or C low diff. travel 0.5-14 NPT 0.5-14 NPT 8 ft R SCiCdWe ,r omtaormy,e CnWta r&y, 6S Gold contacts, XA 9ST-cOoOnWd-uAc ctoarb le, low torque 0.5-14 NPT 8 ft Side rotary, CW & Sequential, 5-conductor S CCW, gravity 6T gold contacts, PB STOOW-A cable, return 0.5-14 NPT 30 ft T SCexiCdtWre. l,ro omwtao trmoyr,e qCnuWtea r&y, 6U Cg0o.e5lnd-t1 ec4ro nNnetPauTcttras,l , 1 Cheloacdk rwoitsaet ion U SCiCdWe ,r omtaormy,e CnWta r&y, 2 Counterclockwise 5° pretravel head rotation Adustable top Head assembled V pin plunger, 3 with actuator to momentary right side Adustable side Head assembled W pin plunger, 4 with actuator to momentary left side Head assembled 5 with actuator to mounting surface Roller 6 perpendicular to mounting surface Seal Options Indicator light 7 wired to normally closed circuit B L(flouwo treomsilpic.one) Roller on side 8 plunger in Improved chem. vertical position C resistance (flurorcarbon) NOTE: Not all combinations of model codes are available. Please contact your local Honeywell provider for assistance. 4 sensing.honeywell.com

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series ASSEMBLY MODIFICATIONS • ROTARY HDLS Series Electrical Ratings: 10 A Continuous Carry Momentary action rotary switches can be furnished in other ac Volts; Pilot Duty: AC-15, A600/B600 than the normal assembled conditions. To specify modifica- tions, add the numbers shown below to the catalog listings. Electrical Circuitry Vac Amps at 0.35 Amps at 0.35 Modification number suffixes are: Rating Power Factor Power Factor Make Break 1 Clockwise actuation only 2 Counterclockwise actuation only A* SPDT 120 60 6 AC-15, DPDT 3 Shaft to right of switch front 240 30 3 A600 4 Shaft to left of switch front 480 15 1.5 5 Shaft to back of switch 600 12 1.2 7 Indicator light wired to NC circuit B D 120 30 3 AC-15, 240 15 1.5 For example, B600 Catalog listing LSA1A23 is an LSA1A switch adjusted for coun- 480 7.5 0.75 terclockwise actuation only. The operating shaft is to the right 600 6 0.60 side of the switch when viewing it from the front (label side). D Gravity return (Model LSS..) and extra-low torque (Model No lever. LST..) Catalog listing LSA8A7 is an LSA8A switch with the 240 volt indicator light wired to the NC circuit. No lever. HDLS Series Electrical Ratings: dc Volts; Pilot Duty: DC-13, R300 Electrical Circuitry Vdc Make & Break Make & Break PLUNGER ASSEMBLY MODIFICATIONS Rating Amps Amps Inductive Resistive Add the following modification numbers to the catalog listing in the plunger switch: A, B* SPDT 125 0.25 0.8 DPDT 3 Side plunger to right of switch front 250 0.15 0.4 4 Side plunger to left of switch front * For switches with an indicator light, use only at voltage stated 5 Side plunger to back of switch for indicator light. 6 Roller on top plungers perpendicular to mounting sur- face MICRO SWITCH HDLS limit switches are capable of the follow- 7 Light on indicator versions wired to NC circuit ing low voltage dc loads 8 Roller on side plungers in vertical position For example, Circuitry Vdc Amps Amps Catalog listing LSF1A3 is an LSF1A switch with the side roller Inductive Resistive plunger to the right side. SPDT 24 10 10 DPDT 24 10 10 PLUG-IN VS. NON-PLUG-IN MODELS Honeywell HDLS limit switches are offered in two styles: non- plug-in design and plug-in design. With plug-in construction, the wiring and conduit connection is made to the base recep- tacle. This feature reduces downtime as the plug-in unit can be removed and replaced without disconnecting the wiring or conduit connections to the switch. Sensing and Internet of Things 5

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series MICRO SWITCH HDLS SERIES ACTUATOR HEADS SIDE ROTARY: Available levers provide greater versatility. TOP ROTARY: Available levers provide greater versatility. Mo- Heads may be positioned with shaft on any side. All are mo- mentary action. mentary action except maintained head (LSN Series). LSB: With 100° minimum overtravel. LSA - Standard: 15° maximum pretravel, Various levers that fit side rotary shafts 5° (single pole) and 7° (double pole) may be used on the top rotary shaft. maximum differential travel, 60° mini- Switch is ideal when increased overtravel mum overtravel. Operating temperature is required. Momentary action. Standard range from -12°C to 121°C [10°F to operating temperature range from -1°C 250°F].* to 121°C [30°F to 250°F].* LSR - Low operating torque: 0.19 Nm [1.7 in lb] maximum operating torque. 60° minimum overtravel, 15° maximum pretravel. Operating temperature range from -1°C to 121°C TOP PLUNGERS: Available with 4,83 mm [0.19 in] minimum [250°F to 250°F].* overtravel. Top pin plungers are offered in pin plunger, an LSN - Maintained contact: Maintained on counterclockwise adjustable plunger, and a roller plunger. Standard temperature rotation and reset on clockwise rotation, and vice versa. Oper- range of -12°C to 93°C [10°F to 200°F]. ating temperature range from -1°C to 121°C [30°F to 250°F]. LSC - Top pin plunger: A corrosion- LSP - Low differential: 3° (single pole) and 4° (double pole) resistant steel plunger for in-line actuat- maximum differential travel. 68° minimum overtravel, 7° ing motion. A boot seal on the plunger maximum pretravel. Operating temperature range from -12°C and a seal between the actuator head to 121°C [10°F to 250°F].* and housing keep out coolant, dust, and LSH - Low torque, low differential travel: Features low chips. Momentary action. operating torque and narrow differential travel. 68° minimum LSD - Top roller plunger: A corrosion- overtravel. Operating temperature range from -1°C to 121°C resistant steel roller and plunger that is [30°F to 250°F].* adjustable to 90° angles to accept cam LSU - Low pretravel: 5° max. pretravel, 70° min. overtravel. or slide operation from any of two direc- Operating temperature range from -12°C to 121°C [10°F to tions. Boot seal on the plunger and a seal 250°F].* between the actuator head and housing. LSL - Sequence action: Delayed action between operation Momentary action of two poles. 48° minimum overtravel. Operating temperature LSV - Adjustable top pin plunger: range from -12°C to 121°C [10°F to 250°F].* Provides easy application and saves on LSM - Center neutral: One set of contacts operates on the installation time. The operating points clockwise rotation, and another set on the counterclockwise of the switch can be adjusted from 52,8 rotation. 53° minimum overtravel. Operating temperature mm to 59,3 mm [2.085 in to 2.335 in]. range from -1°C to 121°C [30°F to 250°F].* Seals are the same as the pin plunger. LST - Momentary action with extra low torque: 12 in oz of Momentary action. operating torque with momentary action. Operating tempera- ture range from -12°C to 121°C [10°F to 250°F].* LSS - Gravity return: Has no return spring mechanism in actuator head so weight of the lever must provide the return force. Extremely light operating torque (5 in oz max.) is useful in conveyor applications and can be operated by small or lightweight objects. Operating temperature range from -1°C to 121°C [30°F to 250°F].* *(Fluorocarbon seals are preferred for temperatures above 93°C [200°F]). 6 sensing.honeywell.com

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series MICRO SWITCH HDLS SERIES ACTUATOR HEADS SIDE PLUNGERS: Available with 4,83 mm [0.19 in] minimum overtravel. Side plungers are offered in plain plunger, an adjustable plain plunger, a roller plunger, and a maintained plunger. Standard temperature range of -12°C to 93°C [10°F to 200°F]. LSE - Side pin plunger: For actuating LSW - Adjustable side pin plunger: motion inline with the plunger travel. Ac- Has the same features of the side plain tuating head may be faced in any of four plunger plus the means to adjust the positions, 90° apart. A boot seal on the operating points of the switch from plunger and a seal between the head 41 mm to 47,4 mm [1.615 in to 1.865 and housing keep out coolant, dust, and in]. Seals are same as side pin plunger. chips. Momentary action. Momentary action. LSF - Side roller plunger: Fits close LSG - Maintained contact side pin quarters under cams and slides. The plunger: Offers a maintained contact head may be faced in any of four posi- on actuation of the switch. A reverse tions, 90° apart. The roller can be turned motion of the plunger resets the vertical or horizontal to the switch. Seals switch. Sealing is the same as other are same as side pin plunger. Momen- side plunger actuation heads. Operat- tary action. ing temperature range is -1°C to 93°C [30°F to 200°F]. WOBBLE LEVER ACTUATING HEADS: Heads come with either a spring wire, Delrin® plastic rod, or steel cat whisker. Any move- ment of the lever (except pull) will actuate the switch. Standard temperature range of -12°C to 93°C [10°F to 200°F]. LSJ1A-7M - Spring LSJ1A-7N - Flexible LSK1A-8C - Coil LSJ1A-7A - Plastic LSK1A-8A - Cat wire: 300 Series SST actuator: Designed spring: Designed with rod: Recommended whisker: 300 Series wire may be formed for with a tin-plated cable. a 300 Series SST coil where possible scratch- SST actuator designed special applications. spring. ing or marring by for low operating force the actuator is to be applications. avoided. Sensing and Internet of Things 7

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series SPECIAL OPTIONS High temperature/Chemical-resistant Switches Low Temperature Switches Completely fluorocarbon (FC)-sealed switches have a full FC All forms of HDLS limit switches are also available in low-tem- body gasket coving the switch cavity. Rotary types have an perature construction. Design features include fluorosilicone extra FC seal on the operating shaft, while plunger versions diaphragm, shaft seals, and external booth seal (where appli- have FC boot seals. They are for use in many applications cable). If pre-wired with a cable, low temperature limits are where the environment includes fire-resistant synthetic fluids. -10°C [14°F] flex and -30°C [-22°F] non-flex. In addition to most all fluids, the FC-sealed switches may be used with such industrial fluids such as Cellulube, Fyrquell, To order, insert the additional letters Y and B in the appropriate Houghto-Safe, Pydraul, and other special cutting and hydrau- places in the standard catalog listing, as shown below: lic fluids. The additional FC seals also promote longer oper- LSA1A standard, side-rotary plug-in switch ating life for rotary-actuated HDLS switches in applications LSYAB1A low-temperature version of LSA1A where the temperatures are normally -12°C to 121°C [10°F to 250°F]. If pre-wired with cable, then temperature limits are Conduit Openings 105°C [221°F] dry and 60°C [140°F] wet. For conduit openings other than 1/2-NPT and 3/4-NPT, subsi- tute the following after LS in the catalog listing: To order, insert the additional letters Y and C in the appropri- LS3 PG13,5 ate places in the standard catalog listing, as shown below: LS4 20 mm LSA1A standard, side-rotary plug-in switch LSA1A side rotary with 1/2-14 NPT conduit LSYAC1A completely FC-sealed version of LSA1A LS4A1A side rotary with 20 mm conduit Table 2. Temperature Limits Standard HDLS Low Temperature HDLS High Temperature HDLS (Fluorosilicone Sealed): Y_B (Fluorocarbon Sealed)*: Y_C Low Limit High Limit Low Limit High Limit Low Limit High Limit -12°C -1°C 93°C 121°C -40°C -29°C 93°C 121°C -12°C -1°C 121°C [10°F] [30°F] [200°F] [250°F] [-40°F] [-20°F] [200°F] [250°F] [10°F] [30°F] [250°F] LSA - Side Rotary Momentary X X X X X X LSB - Top Rotary X X X X X X LSC - Top Plain Plunger X X X X X X LSD - Top Roller Plunger X X X X X X LSE - Side Plain Plunger X X X X X X LSF - Side Roller Plunger X X X X X X LSG - Side Plunger, Maintained X X X X X X LSH - Side Rotary, Low PT, Low Torque X X X X X X LSJ - Wobble Stick X X X X X X LSK - Cat Whisker X X X X X X LSL - Side Rotary, Sequence X X X X X X LSM - Side Rotary, Center Neutral X X X X X X LSN - Side Rotary, Maintained X X X X X X LSP - Side Rotary, Low Pretravel X X X X X X LSR - Side Rotary, Low Torque X X X X X X LSU - 5º Low Pretravel X X X X X X LSV - Top Adjustable Plunger X X X X X X LSW - Side Adjustable Plunger X X X X X X * For HDLS application wherein the upper temperature limit is normally above 93°C [200°F], much longer switch life can be obtained by using completely fluorocarbon-sealed switches rather than standard HDLS. 8 sensing.honeywell.com

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Factory-sealed Pre-wired Limit Switches Wiring Diagrams (Styles B&G) Features Connectors = Numbers (mini-style) • Pre-wired with 6 ft STOOW-A cable or other 4, 5, or 9-pin Cables = Colors connectors (other lengths available) SINGLE POLE 1NC/1NO CABLE OR MINI STYLE CONNECTOR • Wire entry area completely factory sealed Circuitry • (Cable version) NEMA 1, 6, 6P, 12; IP67 BLACK WHITE 4 3 4 3 • (Connector version) NEMA 1, 6, 6P, 12, 13; IP67 ORANGE RED 1 2 DOUBLE POLE How to order: G CABLE OR MINI STYLE CONNECTOR 1 2 To order factory sealed switches, add the modification codes G = GREEN GREEN shown below to the standard HDLS listings (reference product ORANGGE = Ground BLUE nomenclature on page 4): S ame P1olarity6 Circuitry Cable 1/2 in connector style RED G WHITE 2 5 SPDT C A (4-pin mini-style) 7 8 B (5-pin mini-style) YELLOW BROWN DD (4-pin micSIrNoG-LsEty PleO)LE 3 4 CABLE OR MINI STYLE CONNECTOR DPDT M R (9-pin mini-styl e) Examples: BLACK 4 3 WH ITE Wiring Diagrams (Styles M&R) BLA CGK = GrouPnIdNK ORANGE RED LSA1AC = LSA1A with 6-feet of 5-conductor STOW1 -A ca2ble DOUBLE POLE LSJ2BM-7N = LSJ2B-7N with 6 feet of 9-conductorG STOOW-A CABLE OR MINI STYLE CONNECTOR cable G = GREEN GREEN LSA1AB = LSA1A with a 5-pin mini-style connector LSA1ADD = LSA1A with a 4-pin micro-style connector ORA NGE 1 6 BLUE G NOTE: Connector versions available with 1/2 in conduit only. RED 2 5 WHITE 7 8 YELLOW BROWN 3 4 Wiring Diagram (Style A) BLACK PINK 4 3 G = Ground 3 2 2NC/2NO center neutral 2NC/2NO 4 1 1 2 Pole 1 Pole 2 Pole 1 Pole 2 Same Polarity 4 8 4 8 3 7 3 7 Wiring Diagram (Style DD) Same CCW CW polarity each 4 2 6 pole 2 1 Same 2 6 polarity 3 4 1 5 each 1 2 pole 1 5 Pin 3 not connected 2NC/2NO sequential Same Polarity Pole 1 Pole 2 4 8 3 7 1st 2nd 2 6 Same polarity 1 5 each pole Sensing and Internet of Things 9

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series ELECTROMECHANICAL SWITCHES Operating Force (O.F.) – Amount Pretravel (P.T.) – Distance or angle Definitions below explain the meaning of of force applied to switch plunger or traveled in moving plunger or actuator operating characteristics. Characteristics actuator to cause contact ‘‘snap-over.’’ from free position to operating position. shown in tables were chosen as most Note in the case of adjustable actuators, Release Force (R.F.) – Amount of force significant. They are taken at normal the force is measured from the maximum still applied to switch plunger or actuator room temperature and humidity. These length position of the lever. at moment contacts snap from operated may vary as temperature and humidity Overtravel (O.T.) – Plunger or actuator position to unoperated position. conditions differ. Sketches show how travel safely available beyond operating characteristics are measured for in-line Total Travel (T.T.) – Distance from position. actuator free position to overtravel limit plunger actuation and rotary actuation. position. Linear dimensions for in-line actuation are from top of plunger to a reference line, usually the center of the mounting holes. Rotary actuated HDLS limit switches have the characteristics in degrees of angular rotation. Differential Travel (D.T.) – Plunger or actuator travel from point where contacts ‘‘snap-over’’ to point where they ‘‘snapback.’’ Free Position (F.P.) – Position of switch plunger or actuator when no external force is applied (other than gravity). Full Overtravel Force – Force required to attain full overtravel of actuator. Operating Position (O.P.) – Position of switch plunger or actuator at which point contacts snap from normal to operated position. Note that in the case of flexible or adjustable actuators, the operating position is measured from the end of the lever or its maximum length. Location of operating position measurement shown on mounting dimension drawings. Bar Chart Description (Inline and Rotary) T.T. O.P. NC = Normally closed contact(s) O.T. NO = Normally open contact (s) NC > Actuation NO NO contact closed < Release NC contact open R.T. D.T. F.P. 10 sensing.honeywell.com

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Table 3. Side Rotary • MICRO SWITCH HDLS Series Order Guide/Recommended Listings Standard (LSA) Low Differential 5° Pretravel (LSU) (LSP) Standard Low pretravel & Low pretravel Description low differential travel SPDT DPDT SPDT DPDT SPDT DPDT Snap Action Snap Action Snap Action Snap Action Snap Action Snap Action 1NO/1NC 2NO/2NC 1NO/1NC 2NO/2NC 1NO/1NC 2NO/2NC 3 4 3 4 3 4 3 4 3 4 3 4 1 2 1 2 1 2 1 2 1 2 1 2 105°°1-23-43-41-210° 0°571-2/5-63-4/7-83-4/7-81-2/5-668 09°°1-23-43-41-26° 0°571-2/5-63-4/7-83-4/7-81-2/5-668 05°°1-23-43-41-22° 0°571-2/5-63-4/7-83-4/7-81-2/5-6681° 5° 5° 8° 9° 15° 75° 75°(cid:31) (cid:30) (cid:31) (cid:30) CCoonnttaacctt colpoesne do n 75°(cid:31) (cid:30) 75°(cid:31) (cid:30) 75°(cid:31) (cid:30) 75°(cid:31) (cid:30) Pretravel 15° max. 15° max. 9° max. 9° max. 5° max. 5° max. Different. travel 5° max. 7° max. 3° max. 4° max. 3° max. 4° max. Overtravel 60° min. 60° min. 66° min. 66° min. 70° min. 70° min. Oper. torque 0,45 Nm [4 in-lb] max. 0,45 Nm [4 in-lb] max. 0,45 Nm [4 in-lb] max. Action CW & CCW (Momentary) Op. temp range3 -12°C to 121°C [10°F to 250°F] (for low temp, high temp, or preleaded versions, see pages 8-9) Circuitry Contacts Body Style2 Conduit Options (NPT) Silver Plug-in 0.5 in LSA1A LSP1A LSU1A Gold4 Plug-in 0.5 in LSA1E LSP1E LSU1E (cid:31) (cid:29) Silver Plug-in 0.5 in 120 V Ind. lite1 LSA5A LSP5A LSU5A T D Silver Plug-in 0.5 in 240 V Ind. lite1 LSA8A LSP8A LSU8A SP (cid:30) (cid:28) DouSbPleD BTreak Silver Plug-in 0.5 in 2m4a xV. aLuEtDo 1po.5la mritAy 1 LSA9A LSP9A LSU9A Non-plug- Silver 0.5 in LSA3K LSP3K LSU3K in Silver Plug-in 0.75 in LSA2B LSP2B LSU2B Gold4 Plug-in 0.75 in LSA2S – – (cid:27) (cid:31) Silver Plug-in 0.5 in LSA6B LSP6B LSU6B (cid:26) (cid:30) T Gold4 Plug-in 0.5 in LSA6S – – D DP (cid:25) (cid:29) Silver Plug-in 0.75 in 120 V Ind. lite1 LSA2R LSP2R LSU2R Non-plug- (cid:24) (cid:28) Silver 0.75 in LSA4L LSP4L LSU4L DPDT in Double Break Non-plug- Silver 0.5 in LSA7L LSP7L LSU7L in 1 Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 93°C [200°F] 2 Plug-in listings include base receptacle 3 Completely fluorocarbon sealed switches are preferred for use in temperatures above 93°C [200°F] 4 Gold-plated contacts NOTE: Same polarity each pole. To order a fluorocarbon sealed switch, insert the letters Y and C into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAC1A limit switch. To order a low temperature, fluorosilicone sealed switch, insert the letters Y and B into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAB1A limit switch. Sensing and Internet of Things 11

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Table 4. Side Rotary • MICRO SWITCH HDLS Series Order Guide/Recommended Listings Low Torque (LSR) Low Diff., Low Torque (LSH) Description Low operating torque Low pretravel and low torque SPDT DPDT SPDT DPDT Snap Action Snap Action Snap Action Snap Action 1NO/1NC 2NO/2NC 1NO/1NC 2NO/2NC 3 4 3 4 3 4 3 4 1 2 1 2 1 2 1 2 0°1-23-43-41-2 57 68 0°1-23-43-41-2 57 68 15° 10° 0° 1-2/5-63-4/7-83-4/7-81-2/5-6 9° 6° 0°1-2/5-63-4/7-83-4/7-81-2/5-6 5° 8° 9° 15° 75° (cid:31) (cid:30) 75°(cid:31) (cid:30) CCoonnttaacctt colpoesne do n 75°(cid:31) (cid:30) 75°(cid:31) (cid:30) Pretravel 15° max. 15° max. 9° max. 9° max. Different. travel 5° max. 7° max. 3° max. 4° max. Overtravel 60° min. 60° min. 66° min. 66° min. Oper. torque 0,19 Nm [1.7 in-lb] max. 0,19 Nm [1.7 in-lb] max. Action CW & CCW (Momentary) Op. temp range3 -1°C to 121°C [30°F to 250°F] (for low temp, high temp, or preleaded versions, see pages 8-9) Circuitry Contacts Body Style2 Conduit Options (NPT) Silver Plug-in 0.5 in LSR1A LSH1A (cid:31) (cid:29) Gold4 Plug-in 0.5 in LSR1E LSH1E T Silver Plug-in 0.5 in 120 V Ind. lite1 LSR5A LSH5A D P (cid:30) (cid:28) Silver Plug-in 0.5 in 240 V Ind. lite1 LSR8A LSH8A S SPDT Double Break 24 V LED 1.5 mA Silver Plug-in 0.5 in LSR9A LSH9S max. auto polarity1 Silver Non-plug-in 0.5 in LSR3K LSH3K (cid:27) (cid:31) Silver Plug-in 0.75 in LSR3B LSH2B (cid:26) (cid:30) Silver Plug-in 0.5 in LSR6B LSH6B T D Silver Plug-in 0.75 in 120 V Ind. lite1 LSR2R LSH2R P (cid:25) (cid:29) D Silver Non-plug-in 0.75 in LSR4L LSH4L (cid:24) (cid:28) DPDT Double Break Silver Non-plug-in 0.5 in LSR7L LSHJ7L 1 Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 93°C [200°F] 2 Plug-in listings include base receptacle 3 Completely fluorocarbon sealed switches are preferred for use in temperatures above 93°C [200°F] 4 Gold-plated contacts NOTE: Same polarity each pole. To order a fluorocarbon sealed switch, insert the letters Y and C into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAC1A limit switch. To order a low temperature, fluorosilicone sealed switch, insert the letters Y and B into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAB1A limit switch. 12 sensing.honeywell.com

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Table 5. Side Rotary • MICRO SWITCH HDLS Series Order Guide/Recommended Listings Maint. Maint. Contact Center Neutral Sequence Action Contact (LSN) (LSM) (LSL) (LSQ) Maint. Maintained, Center Neutral Sequential 360° Alt. 2-pos1,2. Std. (Pole 1 operates (Pole 1 operates Description Action CCW; Pole 2 before Pole 2, either operates CW) CW, CCW, or both) SPDT SPDT DPDT DPDT DPDT Maintained Maintained Contact Contact 3 4 13 24 MCaionntataincetd 17 82 75° (cid:31) (cid:30) 0° (cid:30) (cid:31) 0° 1-23-45-67-8 7-85-63-41-2 0°1-23-4 0°1-213 3-43-41-224 0°51-2/5-63-4/7-83-4/7-81-2/5-66 18° 8° 1255°° 2100°° 90° 25° 25° 18° 180° 8° 270° 65° 65° 0° 75° 75° (cid:31) (cid:30) 2442 6886 Contact closed n 1-3-3-1- 5-7-7-5- Contact open o 0° 85°(cid:31) (cid:30) 85°(cid:31) (cid:30) Pole 1: 15° Pretravel 65° max. 65° max. 18° max. Pole 2: add’l 10° Different. travel 40° max. 40° max. 10° max. each pole: 5° Overtravel 20° min. 20° min. 57° min. 48° min. Oper. torque 0,45 Nm [4 in-lb] 0,45 Nm [4 in-lb] 0,45 Nm [4 in-lb] Action Maintained CW & CCW (Momentary) -12°C to 121°C Op. temp range6 -1°C to 121°C [30°F to 250°F] [10°F to 250°F] (for low temp, high temp, or preleaded versions, see pages 8-9) (for low temp, high temp, or pre- leaded versions, see pages 8-9) Circuitry Contacts Body Style5 Conduit Options (NPT) Silver Plug-in 0.5 in LSQ300 LSN1A Gold3 Plug-in 0.5 in – LSN1E (cid:31) (cid:29) T Silver Plug-in 0.5 in 120 V Ind. lite4 – LSN5A D SP (cid:30) (cid:28) Silver Plug-in 0.5 in 240 V Ind. lite4 – LSN8A POLE 1 POLE 2 DouSbPleD BTreak Silver Non- 0.5 in – LSN3K plug-in Silver Plug-in 0.75 in – LSN2B LSM2D LSL2C (cid:27) (cid:31) Silver Plug-in 0.5 in – LSN6B LSM6D LSL6C (cid:26) (cid:30) T Gold3 Plug-in 0.5 in – – LSM6U – D DP (cid:25) (cid:29) Silver Non- 0.75 in – LSN4L LSM4N LSL4M plug-in (cid:24) (cid:28) DPDT Silver Non- 0.5 in – LSN7L LSM7N LSL7M Double Break plug-in 1 Mechanical trip before electrical trip. 2 Total travel is approximately 80° max. Maintained contact switch normally used with LSZ53 yoke actuator. 3 Gold-plated contacts 4 Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 93°C [200°F]. 5 Plug-in listings include base receptacle 6 Completely fluorocarbon-sealed switches are preferred for temperatures above 93°C [200°F]. NOTE: Same polarity each pole. To order a fluorocarbon sealed switch, insert the letters Y and C into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAC1A limit switch. To order a low temperature, fluorosilicone sealed switch, insert the letters Y and B into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAB1A limit switch. Sensing and Internet of Things 13

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Figure 2. MICRO SWITCH HDLS side rotary (single pole) di- Figure 3. MICRO SWITCH HDLS side rotary (double pole) mensions dimensions SPDT Plug-in (mm[in]) DPDT Plug-in (mm[in]) 39,6 39,6 62,0 [1.56] 62,0 [1.56] [2.44] 14,7 [2.44] 14,7 [.58] [.58] 19,0 MTG PADS 19,0 [.75] [.75] MTG PADS 7,32 7,32 106,7 [.29] [.29] [4.20] 59,4 119 [2.34] 70,4 [4.69] 59,4 [2.77] [2.34] 82,6 74,9 89,5 [3.53] [2.95] [3.53] CONDUIT OPENING 18,8 LOCATION 16,5 29,4 [.74] 29,4 [.65] [1.16] [1.16] 41,1 CONDUIT OPENING [1 2.050,4] [1.62] LOCATION 26,4 47,8 [1.04] [1.88] 44,5 2X 5,2 [.20] Ø MTG HOLES 45,3 2X 10-32 UNF [1.75] [1.78] TAPPED FROM REAR ONLY 2X 10-32 UNF 2X 5,2 [.20] Ø MTG HOLES TAPPED FROM REAR ONLY 8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH LSA DPDT PLUG-IN PRODUCT DIMENSIONS SPDTL SNA oSPnDT- PpLUlGu-IgN -PRiOnD UCT DIMENSIONS DPDT No(nFO-Rp RElFuERgEN-CiEn O NLY) (FOR REFERENCE ONLY) (mm[in]) (mm[in]) 39,6 39,6 [1.56] 62,0 [1.56] 14,7 [2.44] 14,7 [0.58] [.58] 19,0 [.75] MTG PADS 19,05 MTG PADS [.75] 7,32 [.29] 119 [4.69] 59,4 59,5 [2.34] [2.34] 70,4 82,6 [2.77] 89,7 [3.25] 75,9 [3.53] [2.97] 20,3 21,3 [0.8] 29,4 [.84] CONDUIT OPENING [1.16] [12.91,64] LO CATION 41,1 CONDUIT OPENING 38,1 36,6 [1.62] LOCATION [1.50] 47,8 [1.44] 2X 10-32 UNF [ 14.57,83] [1.8 8] 44,5 TAPPED FROM REAR ONLY 2X 10-32 UNF [1.75] TAPPED FROM REAR ONLY 2X 5,2 [.20] Ø MTG HOLES 2X 5,2 [.20] Ø MTG HOLES 8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH LSA DPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) LSA SPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) 14 sensing.honeywell.com

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Table 6. Top Rotary • MICRO SWITCH HDLS Series Order Guide/Recommended Listings Top Rotary (LSB) Description Increased overtravel (100° min.). Uses same levers as side rotary SPDT DPDT Snap Action Snap Action 1NO/1NC 2NO/2NC 3 4 3 4 1 2 1 2 2442 7 8 0° 1-3-3-1- 5 6 25° 15° 2/5-64/7-84/7-82/5-6 0° 1-3-3-1- 13° 25° 135° (cid:31) (cid:30) Contact closed n 135° Contact open o (cid:31) (cid:30) Pretravel 25° max. 25° max. Different. travel 10° max. 12° max. Overtravel 110° min. 110° min. Oper. torque 0,28 Nm [2.5 in lb] max. Action CW and CCW (Momentary) Op. temp range3 -12°C to 121°C [10°F to 250°F] (for low temp, high temp, or preleaded versions, see pages 8-9) Circuitry Contacts Body Style2 Conduit Options (NPT) Silver Plug-in 0.5 in LSB1A – Gold4 Plug-in 0.5 in LSB1E – (cid:31) (cid:29) Silver Plug-in 0.5 in 120 V Ind. lite1 LSB5A – T D Silver Plug-in 0.5 in 240 V Ind. lite1 LSB8A – P (cid:30) (cid:28) S SPDT Silver Plug-in 0.5 in 24 V LED 1.5 mA LSB9A – Double Break max. auto polarity1 Silver Non-plug- 0.5 in LSB3K – in Silver Plug-in 0.75 in – LSB2B (cid:27) (cid:31) Silver Plug-in 0.5 in – LSB6B (cid:26) (cid:30) T Silver Plug-in 0.75 in 120 V Ind. lite1 – LSB2R D P (cid:25) (cid:29) Silver Non-plug- 0.75 in – LSB4L D in (cid:24) (cid:28) DPDT Silver Non-plug- 0.5 in – LSB7L Double Break in 1 Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 93°C [200°F] 2 Plug-in listings include base receptacle 3 Completely fluorocarbon sealed switches are preferred for use in temperatures above 93°C [200°F] 4 Gold-plated contacts NOTE: Same polarity each pole. To order a fluorocarbon sealed switch, insert the letters Y and C into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAC1A limit switch. To order a low temperature, fluorosilicone sealed switch, insert the letters Y and B into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAB1A limit switch. Sensing and Internet of Things 15

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Figure 4. MICRO SWITCH HDLS top rotary (single pole) dimen- Figure 5. MICRO SWITCH HDLS top rotary (double pole) sions dimensions SPDT Plug-in (mm[in]) DPDT Plug-in (mm[in]) 21,6 21,6 [.85] [.85] MTG PA DS Ø[Ø 7 0,4.2 D9]I AD.IA. [13.95,66] MTG PADS [7.,2392]DIA [13.95,68] 57,2 [2.25] 127.6 57,2 [5.02] [ 13.64,34] [ 14.26,74] [2.25] [13.64,34] [ 14.26,74] 139,8 [5.5] 59,4 59,5 [ 27.49,59] [2.34] [ 27.07,74] [ 38.95.37] [2.34] [38.22,56] 16,5 29,4 25,[4.65] [1.16] 1[.87,48] [12.91,64] 39,[11.00] [14.16,21] [ 12.60,44] 47,8 [1.54] 44,4 [1.88] [1.75] 2X 5,2 [.20] Ø MTG HOLES 45,3 CONDUIT OPENING [1.78] 2X 10-32 UNF LOCATION 2X 10-32 UNF CONDUITL OOPCEANTIIONGN TAPPED FROM REAR ONLY TAPPED FROM REAR ONLY 2X 5,2 [.20] Ø MTG HOLES 8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH SLPSBD SPTDT NPLUoGn-IN- PpROlDuUCgT -DiIMnEN (SmIONSm[in]) DPLSBD DPTD T(FN POLRUo RGnE-IFNE- RPpRENOlCDuEU CgOTN -DLYiIM)nEN (SmIONSm[in]) (FOR REFERENCE ONLY) 21,6 21.6 MTG PADS [.85] 7,4 DIA [13.95,66] MTG PA DS [.85] [7.,2392]DIA [ 13.95.68] [.29] 57,2 [2.25] [ 13.64,34] [ 14.26,74] [13.64,34] [ 14.26,74] [ 13.64,34] 127,6 139.8 [5.02] [5.5] 59,5 [ 27.59,88] [ 25.93,44] [ 27.07,74] [ 38.95.37] [2.34] [ 38.22.56] 20,3 29,4 CONDUIT[ 1 3O.95P,40E]NIN [1G 3. 464,6][.80] [ 14.47,54] 2X 5,2 [.20] Ø M[[T114G..116, 621H]]OLES CONDUIT LOOPCEANTIINO[ 1G3N.85 ,01][2.814,3] [ 14.57,83] [[ 1124..97812,.864X8]] 10-32 UNF LOCATION 2X 10-32 UNF TAPPED FROM REAR ONLY TAPPED FROM REAR ONLY 2X 5,2 [.20] Ø MTG HOLES 8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH LSB DPDT NON PLUG-IN PRODUCT DIMENSIONS LSB SPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) (FOR REFERENCE ONLY) 16 sensing.honeywell.com

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Table 7. Common levers for use with MICRO SWITCH HDLS Rotary Switches Levers for use with side or top rotary actuated switches are available in a wide choice of sizes and materials. The most common listings are shown below. Rollers may be on either side of the lever to best match the external acutating mechanism. LSZ51A&C LSZ51B&D LSZ59A,LSZ59B, fixed rotary lever, fixed rotary lever, LSZ59C,LSZ59D LSZ69CA nylon roller, front/ steel roller, front/ short fixed lever, spoke lever - 152 mm [6 in] backl back front/back LSZ55A,LSZ55B, LSZ60 LSZ53A, LSZ53B, LSZ53D LSZ54R LSZ55C,LSZ55D one-way yoke lever, nylon and steel rollers, spring wire offset lever, roller lever front/back placement 305 mm [12 in] front/back LSZ52A, LSZ52K LSZ54M LSZ68 LSZ52J LSZ54N LSZ52B, adjustable lever, aluminum LSZ61 plastric rod w/ adjustable lever, LSZ67AA* stainless steel LSZ52C, LSZ52D nylon roller rod loop spring nylon roller Plastic conveyor roller rod 330 mm adj. lever, nylon/ Ø 38,1 mm Ø 140 mm 152 mm [6 in] 305 mm Ø 25,4 mm [Ø 1 in] [13 in] steel, front/back [Ø 1.5 in] [Ø 5.5 in] [12 in] * May require orientation of switch and lever to enable gravity to help restore free position of switch. Sensing and Internet of Things 17

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Table 8. HDLS Series Actuator Code Table (see previous page) Catalog Material Rod/Roller Rod/Roller Roller Catalog Material Rod/Roller Rod/Roller Roller Listing Dia. mm Width mm Mounting Listing Dia. mm Width mm Mounting [in] [in] [in] [in] Fixed 38,1 mm [1.5 in] radius Fixed 38,1 mm [1.5 in] radius – Rollerless n/a n/a n/a – Rollerless n/a n/a n/a LSZ51A Nylon 19 [0.75] 6,35 [0.25] Front LSZ55A Nylon 19 [0.75] 6,35 [0.25] Back LSZ51B Steel 19 [0.75] 6,35 [0.25] Front LSZ55B Steel 19 [0.75] 6,35 [0.25] Back LSZ51C Nylon 19 [0.75] 6,35 [0.25] Back LSZ55C Nylon 19 [0.75] 6,35 [0.25] Front LSZ51D Steel 19 [0.75] 6,35 [0.25] Back LSZ55D Steel 19 [0.75] 6,35 [0.25] Front LSZ51F Nylon 25,4 [1.0] 12,7 [0.50] Front LSZ55E Nylon 19 [0.75] 12,7 [0.50] Front LSZ51G Nylon 38,1 [1.5] 6,35 [0.25] Front LSZ55K Nylon 38,1 [1.5] 6,35 [0.25] Front LSZ51J Nylon 25,4 [1.0] 12,7 [0.50] Back Short fixed - 33 mm [1.3 in] radius LSZ51L Ball bearing 19 [0.75] 6,35 [0.25] Back LSZ59A Nylon 19 [0.75] 6,35 [0.25] Front LSZ51M Nylon 19 [0.75] 31,7 [1.25] Back LSZ59B Steel 19 [0.75] 6,35 [0.25] Front LSZ51N Steel 19 [0.75] 31,7 [1.25] Front LSZ59C Nylon 19 [0.75] 6,35 [0.25] Back LSZ51P Nylon 19 [0.75] 12,7 [0.50] Front LSZ59D Steel 19 [0.75] 6,35 [0.25] Back Adjustable 38,1 mm to 89,0 mm [1.5 in to 3.5 in] radius – Rollerless n/a n/a n/a LSZ52A Nylon 19 [0.75] 6,35 [0.25] Back 38,1 mm [1.5 in] radius one-way roller lever LSZ52B Steel 19 [0.75] 6,35 [0.25] Back LSZ60A Nylon 19 [0.75] 6,35 [0.25] Front LSZ52C Nylon 19 [0.75] 6,35 [0.25] Front LSZ60B Steel 19 [0.75] 6,35 [0.25] Front LSZ52D Steel 19 [0.75] 6,35 [0.25] Front LSZ52E Nylon 19 [0.75] 33,0 [1.30] Front LSZ52J Nylon 25,4 [1.0] 12,7 [0.50] Front LSZ52K Nylon 38,1 [1.5] 6,35 [0.25] Front LSZ52L Ball bearing 19 [0.75] 6,35 [0.25] Front Flexible loop LSZ52M Nylon 50,8 [2.0] 6,35 [0.25] Front LSZ61 Ø 4,8 [Ø 0.19] 152 mm [6 in] flexible loop LSZ52N Nylon 19 [0.75] 12,7 [0.50] Front Plastic LSZ618 Ø 4,8 [Ø 0.19] 241 mm [9.5 in] flexible loop Yoke – 38,1 mm [1.5 in] radius Plastic LSZ53A Nylon 19 [0.75] 6,35 [0.25] Front/Back LSZ54 Hub only n/a n/a n/a LSZ53B Steel 19 [0.75] 6,35 [0.25] Front/Back LSZ53D Steel 19 [0.75] 6,35 [0.25] Front/Front LSZ53E Nylon 19 [0.75] 6,35 [0.25] Back/Front LSZ53M Nylon 19 [0.75] 31,7 [1.25] Back/Front LSZ53P Steel 19 [0.75] 6,35 [0.25] Back/Back LSZ53S Nylon 19 [0.75] 6,35 [0.25] Back/Back Spring rod Rod LSZ68 Delrin rod, 305 Ø 6,35 n/a n/a – Hub only n/a n/a n/a [12 ] [Ø 0.25] LSZ617 Delrin rod, 406 Ø 6,35 n/a n/a [16] [Ø 0.25] LSZ54M Alum, 140 mm Ø 3,2 n/a n/a [5.5 in] [Ø 0.125] LSZ686 Delrin rod, Ø 6,35 n/a n/a 152 [6] [Ø 0.25] LSZ54N Stainless, 330 Ø 3,2 n/a n/a mm [13 in] [Ø 0.125] LSZ54R SST spring Ø 1,9 n/a n/a wire, 305 mm [Ø 0.075] [12 in] LSZ54V Flex cable (tin Ø 4,8 n/a n/a plated steel), [Ø 0.19] Rubber roller levers 122 mm [4.8 in] LSZ51Y Rubber 50 [2.0] 12,7 front 38,1 mm [1.5 in] [0.50] LSZ54P Plastic rod, Ø 6,85 n/a n/a radius (std.) 533,4 mm [Ø 0.27] [21 in] LSZ55Y Rubber 50 [2.0] 12,7 front 38,1 mm [1.5 in] [0.50] LSZ54W Plastic rod, Ø 6,85 n/a n/a radius (offset) 183 mm [Ø 0.27] [7.2 in] LSZ52Y Rubber 50 [2.0] 12,7 front 38,1 mm to 89,0 [0.50] LSZ54T 330 [13] Ø 4,8 n/a n/a mm [1.5 in to stainless steel [Ø 0.19] 3.5 in] radius Spoke (adjustable) LSZ69CA 152 mm [6.0 3,2 [0.125] n/a n/a Plastic roller levers in] Stainless LSZ67AA* Plastic 38,1 [1.5] 96,5 [3.8] n/a (conveyor) * may require orientation of switch and lever to enable gravity to help restore free position of switch. 18 sensing.honeywell.com

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series MICRO SWITCH HDLS Side Rotary Levers’ Cam Tracking Levers for side and top rotary switches are normally ordered as separate catalog listings. They also may be ordered by including a suffix to the switch catalog listing (see nomenclature tree in this document) and adding the lever price. LSZ51 TYPE LEVERS CAM TRACKING Figure 6. LSZ51 type levers cam tracking Figure 7. LSZ52 type levers cam tracking A[ 25D.7J2,U64 S -- T 26M.35E,18N]T 5[62,4.2 m2 min ttoo 622.4,77 min]m 6[0,3.255 m inm x x0 1.795,0 in m dmia ]d OiaR LEVER INVERTED 58,9 - 65,3 adjustment 6,35 mm x 38,1 mm dia [ 25.10,10 -- 25.72,64] A[D2.J3U2S -T 2M.5E7N]T [0.25 in x 1.5 in dia] OR 6,3A5D XJU 1S9T,0M DEINAT A4[1D2.,J69U9 - S -4 T19M..93E4N]T 1[02.,570 m inm x x1 2.05 ,in4 dmiam] dia [.25 X .75 DIA] LEVER 6,35 X 19,0 DIA INVERTED [.25 X .75 DIA] 21,3 [.85] 21,3 mm 21,3 [0.85 in] [12.50,04] [318.5,1] 25,4 [.85] [13.85,01] 38[,11 .am5d mijnu sttootm 93e1.6n,1 tin m]m [1.00] [1.795,0] 19,05 2[15.,040 m inm] [.75] 19,0 mm 1[.14,30] 6[.,2355] 11,0 6,35 [0.75 in] ADJUSTMENT [.43] ADJU[.S25T]MENT 6,35 mm 11,0 mm [0.25 in] [0.43 in] adjustment Figure 8. LSZ54 type levers cam tracking Figure 9. LSZ55 type levers cam tracking 78,2 mm to 84,6 mm 58,7 mm to 65,0 mm [3.08 in to 3.33 in] [2.31 in to 2.56 in] adjustment adjustment 70,9 mm to 77,2 mm 6,35 mm x 19,0 mm dia. [2.79 in to 3.04 in] [0.25 in x 0.75 in dia.] adjustment 21,3 mm 21,3 mm 127,0 mm [5.0 in] max. aluminum rod [0.85 in] [0.85 in] 330,2 mm [13.0 in] max. stainless steel rod 38,1 mm [1.50 in] 25,4 mm 25,4 mm [1.00 in] [1.0 in] 19,05 mm 9,05 mm [0.75 in] [0.75 in] 11,0 mm 5,3 mm 11,0 mm 6,35 mm [0.43 in] [0.21 in] [0.43 in] [0.25 in] adjustment adjustment Sensing and Internet of Things 19

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Table 9. Top Plungers • MICRO SWITCH HDLS Series Order Guide/Recommended Listings All top plungers are momentary action. Plain (LSC) Roller (LSD) Adjustable (LSV) Top plain plunger for Roller plunger Adjustable top plain Description in-line operating can be rotated at 90° plunger motion increments SPDT DPDT SPDT DPDT SPDT DPDT 1[,07.80 07m iimnnS]13 1n1-2Nap3-4O A/13-4cNtiC1-2o24n1[0,4.0 m55m in][10,.40 70m inimn]S51731-2/5-62nNa3-4/7-8pO A/3-4/7-82cNt1-2/5-6iCo6824n1[0,2.075 m0 min]1[,07.80 07m iimnnS]13 1n1-2Nap3-4O A/13-4cNtiC1-2o24n1[0,4.0 m55m in][10,.40 70m inimn]S51731-2/5-62nNa3-4/7-8pO A/3-4/7-82cNt1-2/5-6iCo6824n1[0,2.075 m0 min] 1[,07.80 07m iimnnS]13 1n1-2Nap3-4O A/13-4cNtiC1-2o24n1[0,4.0 m55m in][10,.40 70m inimn]S51731-2/5-62nNa3-4/7-8pO A/3-4/7-82cNt1-2/5-6iCo6824n1[0,2.075 m0 min] 6,6 mm [0.26 in](cid:31) (cid:30) 6,6 mm 6,6 mm Contact closed n [60,.62 6m inm](cid:31) (cid:30) [0.26 in](cid:31) (cid:30) [60,.62 6m inm](cid:31) (cid:30) [0.26 in](cid:31) (cid:30) [60,.62 6m inm](cid:31) (cid:30) Contact open o Pretravel 1,78 mm [0.07 in] Different. travel 0,38 mm 0,51 mm 0,38 mm 0,51 mm 0,38 mm 0,51 mm [0.015 in] [0.02 in] [0.015 in] [0.02 in] [0.015 in] [0.02 in] Overtravel 4,83 mm [0.19 in] Operating point 45,8 mm [1.805 in] 55,9 mm [2.20 in] 53 mm to 59 mm (nom.) [2.08 in to 2.34 in] Operating force 17,8 N [4 lb] max. Op. temp range3 -12°C to 93°C [10°F to 200°F] (for low temp, high temp, or preleaded versions, see pages 8-9) Circuitry Contacts Body Style2 Conduit Options (NPT) (cid:31) (cid:29) Silver Plug-in 0.5 in LSC1A LSD1A LSV1A Gold4 Plug-in 0.5 in LSC1E LSD1E LSV1E DT (cid:30) (cid:28) Silver Plug-in 0.5 in 120 V Ind. lite1 LSC5A LSD5A LSV5A P SPDT S Double Break Silver Plug-in 0.5 in 240 V Ind. lite1 LSC8A LSD8A LSV8A Non-plug- Silver 0.5 in LSC3K LSD3K LSV3K in (cid:27) (cid:31) Silver Plug-in 0.75 in LSC2B LSD2B LSV2B Silver Plug-in 0.5 in LSC2R LSD2R LSV2R (cid:26) (cid:30) T Silver Plug-in 0.75 in 120 V Ind. lite1 LSC6B LSD6B LSV6B D DP (cid:25) (cid:29) Silver Non-plug- 0.75 in LSC4L LSD4L LSV4L in (cid:24) (cid:28) DPDT Double Break Non-plug- Silver 0.5 in LSC7L LSD7L LSV7L in 1 Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 93°C [200°F] 2 Plug-in listings include base receptacle 3 Completely fluorocarbon sealed switches are preferred for use in temperatures above 93°C [200°F] 4 Gold-plated contacts NOTE: Same polarity each pole. To order a fluorocarbon sealed switch, insert the letters Y and C into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAC1A limit switch. To order a low temperature, fluorosilicone sealed switch, insert the letters Y and B into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAB1A limit switch. 20 sensing.honeywell.com

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Figure 10. MICRO SWITCH HDLS LSC Series (single pole Figure 11. MICRO SWITCH HDLS LSC Series (double pole plunger dimensions plunger dimensions SPDT Plug-in (mm[in]) DPDT Plug-in (mm[in]) [2.815,6] 9,4 [1.548,7] [2.815,6] [1.548,7] [.37] 39,6 9,4 Ø 25,4 [1.56] [.37] 39,6 [1.0] Ø 25,4 [1.56] [1.0] 46,0 46,0 MTG PADS [1.81] [1.81] OPERATING POINT 28,7 MTG PADS OPERATING POINT 28,7 [1.13] [1.13] 59,4 59,5 [2.34] 70,4 [2.34] 74,9 [2.77] [38.22,56] [2.95] 89,7 [3.53] CONDLOUCITA OTIPOENNING 16,5 [ 12.91,64] [ 12.91,64] [.65] 41,1 CONDUIT OPENING 25,4 [1.62] LOCATION 18,8 47,8 [1.00] [.74] [1.88] 39,1 2X 5,2 [.20] Ø MTG HOLES 26,4 2X 10-32 UNF [1.54] [1.04] 45,3 TAPPED FROM REAR ONLY [ 14.47,55] TAPPED FRO2MX 1R0E-A32R UONNFLY [1.78] 29X,5 5[,.23 7[].2 Ø0 ]C Ø'B MOTRGE HXO 7L,8E S[. 31] DEPTH SPDT Non-plug-in (mm[in]) DPLDSTC NDPoDnT- pPLluUgG--IiNn P(RmOmDU[iCnT] )DIMENSIONS LSC SPDT PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) (FOR REFERENCE ONLY) 21,6 21,6 [.85] 9[.,347] [1.548,7] [.85] 9[.,347] [1.548,7] Ø 25,4 39,6 Ø 25,4 [1,0] [1.56] [1.50] 39,6 [1.56] 46,0 46,0 [1.84] MTG PADS [1.81] MTG PADS OPERATING POINT OPERATING POINT 28,7 28,7 [1.13] [1.13] 59,5 [ 25.93,44] 70,4 [ 38.95,37] [2.34] [ 38.22,56] [2.77] 75,8 [2.98] 29,4 29,4 [1.16] CONDUIT OPENING [1.16] CONDUIT OPENING 47,8 LOCA TION 20,3 [ 14.16,21] LOCATION [201.8,34 ] [1.88] [1 3.464,6] [.80] TAPPED FRO2MX 1R0E-A32R UONNFLY [1 .3580,]1 4[15.,738] 2X 5,2 [.20] Ø TMATPGP EHDO FLREOS2 MX 1R0E-A32R UONNFLY 39,0 8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH [1.54] 2X 5,2 [.20] Ø MTG HOLES 44,4 [1.75] LSC DPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) LSC SPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) Sensing and Internet of Things 21

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Figure 12. MICRO SWITCH HDLS LSD Series (single pole) top Figure 13. MICRO SWITCH HDLS LSD Series (double pole) top roller plunger dimensions roller plunger dimensions SPDT Plug-in (mm[in]) DPDT Plug-in (mm[in]) 39,6 39,6 [1.56] 21.46@21,6 [1.56] 25,4 [.85] 25,4 21,6 Ø12,7 [1.00] [1.00] [.85] [.50] Ø12.7 1[.45,87] MTG PADS 4,8 [.50] 14,7 4,8 [1.19] [.58] [.19] MTG PADS 55,9 55,9 [2.20] [2,20] OPERATING OPERATING 28,7 POINT 28,7 POINT [1.13] [1.13] [ 27.49,59] [ 25.93,44] [ 27.07,74] [ 38.95,37] [ 25.93,45] [ 38.22,56] CONDUIT OPENING LOCATION 29,4 16,5 [1.16] CONDUIT OPENING [.65] 41,1 LOCATION 29,4 25,4 [1.62] 21,3 [1.16] [1.00] [.84] 47,8 39,1 2X 5,2 [.20] Ø MTG HOLES 26,4 [1.88] [1.54] 2X 10-32 UNF [1.04] 45,3 2X 10-32 UNF 44,4 TAPPED FROM REAR ONLY [1.78] TAPPED FROM REAR ONLY [1.54] 2X 5,2 [.20] Ø MTG HOLES 9,5 [.37] Ø C'BORE X 7,8 [.31] DEPTH DIMS: MM [IN] LSD SPDT PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) SPDT Non-plug-in (mm[in]) LSDD DPPDDT NTON PNLUoG-InN P-RpODlUuCTg DI-MEiNnSI O(NmS m[in]) (FOR REFERENCE ONLY) 39,6 39,6 [1.56] [1.56] 21,6 25,4 [.85] 25,4 [2.815,6] [1. 0104],7 MTG PADS 4[0,8.19] Ø12,7 [1 1[..0450,87]] 4,8 Ø12,7 [.58] [.50] [1.19] [.50] 55,9 55,9 O P[2E.R2A0T]ING MTG PADS 28,7 OP P[E2OR.2IAN0T]TING [ 12.81,37] POINT [1.13] 59,5 [ 27.59,88] [ 25.93,44] [ 27.07,74] [ 38.95,37] [2.34] [ 38.22,56] CONDUIT OPENING CONLDOUCITA TOIPOENNING [12.91,64] LOCATION 29,4 47,8 20,3 [1.16] [2.814,3] [1.88] [.80] 41,1 38,1 36,6 [1.62] [1.50] 2X 10-32 UNF [1.44] 2X 5,2 [.20] Ø MTG HOLES 45,3 TAPPED FROM REAR ONLY 39,0 [1.78] [1.54] 2X 5,2 [.20] Ø MTG HOLES 44,4 2X 10-32 UNF DIMS: MM 8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH [1.75] TAPPED FROM REAR ONLY [IN] DIMS: MM [IN] LSD DPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) LSD SPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) 22 sensing.honeywell.com

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Figure 14. MICRO SWITCH HDLS LSV Series top adjustable Figure 15. MICRO SWITCH HDLS LSV Series top adjustable plunger (single pole) dimensions plunger (double pole) dimensions SPDT Plug-in (mm[in]) DPDT Plug-in (mm[in]) 14,7 14,7 [.58] [.58] 7,9 21,6 Ø25,4 [.31] [.85] 7,9 [1.00] 39,6 Ø 25,4 [.31] 21,6 [1.56] [Ø1.00] [.85] 17,5 28,7 59,4 MTG P ADS [1.679,5] [25.30,91] [12.81,37] MAX O[P25PO.93EI,4N4R]TATING MTG P ADS [.69] MIN O[P2P5O.3E0I,9RN1]ATTING [1.13] MAX O[P2PO.3EI4NR]TATING MIN OPERATING POINT 59,5 [2.34] 89,7 82,6 59,4 [3.53] [3.25] [2.34] 70,4 [2.77] 74,9 [2.95] CONDUIT OPENING LOCATION 29,4 CONDUIT OPENING 29,4 [1.16] LOCATION [1.16] 18.8 47,8 [1.665,5] [14.16,21] [12.064,4] [.74] [1.88]2X 10-32 UNF 25,4 38,1 TAPPED FROM REAR ONLY [1.00] [1.50] 39,0 2X 5,2 [.20] Ø MTG HOLES 45,3 2X 5,2 [.20] Ø MTG HOLES [1.54] [1.78] 9,5 [.37] Ø C'BORE X 7,8 [.31] DEPTH 44,5 2X 10-32 UNF [1.75] TAPPED FROM REAR ONLY DIMS: MM [IN] DIMS: MM LSV DPDT PLUG-IN PRODUCT DIMENSIONS [IN] (FOR REFERENCE ONLY) SPDLTS NV oSPnD-pT lPuLgU-Gin-I N(m PRmO[DinU]C)T DIMENSIONS DPDT Non-plug-in (mm[in]) (FOR REFERENCE ONLY) 14,7 14,7 [.58] Ø 25,4 [.58] [2.815,6] 36,6 [.371,9] [2.815,6] [Ø1.00] [.371,]9 25,4 [1.56] MTG PADS [1.679,5] [1.00] MIN O[25P.30E,91R]ATING [ 12.81,37] MAX [PO25OP.93IE,4N4R]TATING MTG P ADS [1.679,5] MIN O[P2P5O.3E0I,9RN1]ATTING[12.81,37] MAX O[P25PO.93EI,4N4R]TATING POINT 59,5 89.65 [2.34] 82,6 [27.59,88] [25.93,44] [27.07,74] [3.25] CONDUIT OPENING LOCATION 29,4 CONDUIT OPENING 29,4 [1.16] LOCATION [1.16] 21,3 [2.800,3] [14.16,21] [1.3580,]1 [.84] [14.78,88] [13.464,6] 2X 5,2 [.20] Ø MTG HOLES [14.57,83] TAPPED FRO2MX 1R0E-A32R UONNFLY 39,0 2X 5,2 [.20] Ø MTG HOLES [1.54] 44,4 2X 10-32 UNF DIMS: MM 8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH [1.75] TAPPED FROM REAR ONLY [IN] DIMS: MM [IN] LSV DPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) LSV SPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) Sensing and Internet of Things 23

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Table 10. Side Plungers • MICRO SWITCH HDLS Series Order Guide/Recommended Listings Heads may be positioned to accept actuation Plain (LSE) Roller (LSF) Adjustable Maintained (LSG) (LSW) from any of four directions, 90° apart. Side plain Side roller Adjustable Side plain plunger with plunger plunger side plain maintained contact Description (momentary) (momentary) plunger (momentary) Snap Action 2NO/2NC Snap Action 1NO/1NC 3 4 13 24 517 682 0 in1-23-43-41-2 0 in1-2/5-63-4/7-83-4/7-81-2/5-6 0 in1-23-43-41-2 0 in1-2/5-63-4/7-83-4/7-81-2/5-6 2[re0,0s.0e38t m inm] 2[re0,0s.0e38t m inm] 1,4 mm 2,54 mm [0.055 in] 1,4 mm [0.10 in] 2[0,5.140 m inm] [0.055 in] 4[0,3.127 mt rinmip] 4[0,3.127 mt rinmip] 6,35 mm 6,35 mm [0.25 in] (cid:31) (cid:30) [0.25 in] (cid:31) (cid:30) Contact closed n 7[0,3.269 m inm] (cid:31) (cid:30) 7[0,3.269 m inm](cid:31) (cid:30) Contact open o Pretravel 2,54 mm [0.10 in] 4,32 mm [0.17 in] Single pole: 0,64 mm [0.025 in] 2,29 mm Different. travel Double pole: 0,89 mm [0.035 in] [0.09 in] Overtravel 4,83 mm [0.19 in] 2,0 mm [0.08 in] 41,0 mm to Operating point 33,0 mm 44,1 mm 47,4 mm 67,6 mm [1.48 in] (nominal) [1.30 in] [1.74 in] [1.62 in to 1.87 in] 44,5 N Operating force 26,7 N [6 lb] max. [10 lb] max. -1°C to 93°C Op. temp range3 -12°C to 93°C [10°F to 200°F] [30°F to 200°F] (for low temp, high temp, or preleaded versions, see pages 8-9) (for low temp, high temp, or preleaded versions, see pages 8-9) Circuitry Contacts Body Style2 Conduit Options (NPT) (cid:31) (cid:29) Silver Plug-in 0.5 in LSE1A LSF1A LSW1A LSG1A Gold4 Plug-in 0.5 in LSE1E LSF1E LSW1E LSG1E T PD (cid:30) (cid:28) Silver Plug-in 0.5 in 120 V Ind. lite1 LSE5A LSF5A LSW5A LSG5A S SPDT Double Break Silver Plug-in 0.5 in 240 V Ind. lite1 LSE8A LSF8A LSW8A LSG8A Silver Non-plug-in 0.5 in LSE3K LSF3K LSW3K LSG3K (cid:27) (cid:31) Silver Plug-in 0.75 in LSE2B LSF2B LSW2B LSG2B Silver Plug-in 0.5 in LSE2R LSF2R LSW2R LSG2R (cid:26) (cid:30) DT Silver Plug-in 0.75 in 120 V Ind. lite1 LSE6B LSF6B LSW6B LSG6B P (cid:25) (cid:29) D Gold4 Plug-in 0.5 in LSE6S – – – (cid:24) (cid:28) Silver Non-plug-in 0.75 in LSE4L LSF4L LSW4L LSG4L DPDT Double Break Silver Non-plug-in 0.5 in LSE7L LSF7L LSW7L LSG7L 1 Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 93°C [200°F] 2 Plug-in listings include base receptacle 3 Completely fluorocarbon sealed switches are preferred for use in temperatures above 93°C [200°F] 4 Gold-plated contacts NOTE: Same polarity each pole. To order a fluorocarbon sealed switch, insert the letters Y and C into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAC1A limit switch. To order a low temperature, fluorosilicone sealed switch, insert the letters Y and B into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAB1A limit switch. 24 sensing.honeywell.com

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Figure 16. MICRO SWITCH HDLS LSE Series side plain plunger Figure 17. MICRO SWITCH HDLS LSE Series side plain plunger (single pole) dimensions (double pole) dimensions SPDT Plug-in (mm[in]) DPDT Plug-in (mm[in]) 14,7 MTG PADS [2.800 , [32].815,6] 3[OP13OP.,3EI0N0R]TATING [.58] 3[19.,566] [2.80 [0,2.3]815,6] O P [P 1E3O.R33I,A0N0T]TING Ø9,4 [1.548,7] 3[19.,566] 19,0 19,0 MTG PADS [.37] [.75] [.75] 31,5 31,5 [1.24] Ø9,4 [1.24] [.37] [ 1Ø.0205],4 Ø25,4 [1.00] 59,5 [ 25.93,44] 70,4 [ 38,95,37] [2.34] [ 27.07,74] 74,9 [2.77] [2.95] CONLDOUCITA TOIPOENNING [ 12.91,64] CONLDOUCITA TOIPOENNING [ 12.91,64] [1.784,8] [ 14.78,88] 16,5 25,[4.65] [ 14.16,21] [1 2.064,4] TAPPED FR2OXM 1 R0-E3A2R U ONNFLY [1.00] 38,1 [1 .3594,]1 2X 5,2 [.20] Ø MTG HOLES [1.50] 29X,5 5[,.23 7[].2 Ø0] CØ'B MOTRGE H XO 7L,E8 S[. 31] DEPTH 44,5 2X 10-32 UNF [1.75] TAPPED FROM REAR ONLY DIMS: MM [IN] LSE DPDT PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) SPDTLS EN SPoDnT P-LUpGl-uIN gPR-ODinUC T( mDIMmENS[IOiNnS]) DPDT Non-plug-in (mm[in]) (FOR REFERENCE ONLY) 33,0 14,7 21,6 O P[1E.R3A0T]ING [.58] MTG PADS 2[.18,56] [ 13.33,00] [1.548,7] MTG PADS [.85] POINT OPERATING 39,6 POINT 39,6 [1.56] [1.56] 20,3 19,0 Ø9,4 19,0 [.80] [ 13.12,45] [.75] [2.800,3] [.37] 31,5 [.75] Ø9,4 [1.24] [.37] Ø25,4 Ø25,4 [1.00] [1.00] [ 27.59,88] [ 25.93,44] [ 27.07,74] [ 38.95,37] [ 25.93,45] [ 38.22,56] CONDUIT OPENING LOCATION [ 12.91,64] CONDUIT OPENING 29,4 20,3 LOCATION [1.16] [1 3.464, 6][.80] 2X 5,2 [.20] Ø MTG [ 14H.16O,21L]ES [2.814,3] [ 14.78,88] 38,1 [1 3.594,0] [ 14.47,54] TAPPED FR2OXM 1 R0-E3A2R U ONNFLY [1.50] [ 14.57,83] TAPPED FR2OXM 1 R0-E3A2R U ONNFLY 2X 5,2 [.20] Ø MTG HOLES 8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH LSE DPDT NON PLUG-IN PRODUCT DIMENSIONS LSE SPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) (FOR REFERENCE ONLY) Sensing and Internet of Things 25

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Figure 18. MICRO SWITCH HDLS LSF Series side roller plunger Figure 19. MICRO SWITCH HDLS LSF Series side roller plunger (single pole) dimensions (double pole) dimensions SPDT Plug-in (mm[in]) DPDT Plug-in (mm[in]) 44,2 44,2 OP[PE1OR.7IA4NT]TING [1.548,7] MTG P ADS OP[PE1OR.7IA 4NT]TING 14,7 12,7 [.58] MTG P ADS [2.815,6] [RD.5OIA0LM]LEETRE R 3[19.,566] [2.815,6] 1[R.25O.07L]LER 4,8 3[19.,566] 4,8 DIAMETER [.19] [.19] 20.3 [2.800,3] [1.795,0] [ 13.12,45] [.80] [1.795,0] [ 13.12,45] [ 12.50,04] [ 12.50,04] 59,5 [ 27.49,59] [ 25.93,44] [ 27.07,74] [ 38,95,37] [2.34] [ 38.22,56] CONDUIT OPENING CONDUIT OPENING 29,4 LOCATION 29,4 LOCATION [1.16] [1.16] 16,5 [.65] [ 14,16,21] 18,8 [ 14.78,88] 25,4 [.74] [1.00] 26,4 2X 10-32 UNF 39,1 2X 5,2 [.20] Ø MTG HOLES 38,1 [1.04] TAPPED FROM REAR ONLY [1.54] 44,4 2X 10-32 UNF [1.50] 2X 5,2 [.20] Ø MTG HOLES [1.54] TAPPED FROM REAR ONLY 45,3 9,5 [.37] Ø C'BORE X 7,8 [.31] DEPTH [1.78] DIMS: MM [IN] LSF DPDT PLUG-IN PRODUCT DIMENSIONS SPDLTS NF oSPnD-pT lPuLgU-Gin-I N(m PmRO[iDnU])CT DIMENSIONS DPDT Non-plug-in (mm[in]) (FOR REFERENCE ONLY) (FOR REFERENCE ONLY) 44,2 44,2 [1.74] 14,7 [1.74] OPERATING [.58] OPERATING 21,6 POINT POINT [.85] 39,6 MTG PADS MTG PADS 12,7 [1.56] 14,7 [RD.5OIA0LM]LEETRE R [. 149,8] [2.815,6] 1[.25,07] [.58] 39,6 20,3 ROLLER DIAMETER [1.56] [.80] [1.795,0] [ 13.12,45] [2.800,3] 19,0 [. 149,8] 31,5 25,4 [.75] [1.24] [1.00] n25,4 [1.00] 75,8 59,4 70,4 [2.98] [2.34] [2.77] 59,5 89,7 [2.34] [3.53] 82,6 [3.25] CONDUIT OPENING LOCATION 29,4 [1.16] 20,3 [.80] [ 14,16,21] CONDLOUCITA OTIPOENNING 29,4 36,6 [1.16] [1.44] 2X 5,2 [.20] Ø MTG HOLES 21,3 39,0 [.84] 47,8 [1.54] [ 14.47,54] TAPPED FRO2MX 1R0E-A32R UONNFLY [1 3.580,1] 45,3 [1.882]X 10-32 UNF [1.78] TAPPED FROM REAR ONLY 2X 5,2 [.20] Ø MTG HOLES 8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH LSF SPDT NON PLUG-IN PRODUCT DIMENSIONS LSF DPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) (FOR REFERENCE ONLY) 26 sensing.honeywell.com

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Figure 20. MICRO SWITCH HDLS LSW Series side adjustable Figure 21. MICRO SWITCH HDLS LSW Series side adjustable plunger (single pole) dimensions plunger (double pole) dimensions SPDT Plug-in (mm[in]) DPDT Plug-in (mm[in]) 21,6 47,5 21,6 47,5 [.85] [1.87] [.85] [1.87] MTG P ADS [2.800,3] OP[PE14OMR.16IAI,2NN1T]TING MOPAEXRATING POINT [1.548[,71]3.95,66] [2.800,3] OP[PE14OMR.16IAI,2NN1T]TING MAX OPERATING POINT [1.548[,17]3.95,66] 19,0 19,0 [.75] [.75] 31,4 MTG PADS 31,4 [1.24] [1.24] Ø25,4 Ø25,4 [1.00] [1.00] 7,9 [.31] [27.49,59] ACFR[L.7O3A,19TS]SS [25.93,44] [27.07,74] [38.95,37] AFCLRAOTSSS [25.93,44] [38.22,56] 29,4 CONDLOUCITA OTIPOENNING [1.665,5] [14.11,61] CONDLOUICTA OTPIOENNING [12.91,64] [1.62] 25,4 18,8 47,8 [1.00] [.74] [1.88] [13.594,0] 2X 5,2 [.20] Ø MTG HOLES [12.064,4] 2X 10-32 UNF [14.47,55] TAPPED FRO2MX 1R0E-A32R UONNFLY [1.3580,]1 2X 5,2 [.20] TØAP MPTEGD HFROOLEMS R EAR ONLY 45,3 9,5 [.37] Ø C'BORE X 7,8 [.31] DEPTH DIMS: MM [1.78] [IN] DIMS: MM [IN] LSW SPDT PLUG-IN PRODUCT DIMENSIONS LSW DPDT PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) (FOR REFERENCE ONLY) SPDT Non-plug-in (mm[in]) DPDT Non-plug-in (mm[in]) 21,6 47,5 21,6 47,5 [.85] [1.87] 39,6 [.85] [1.87] 41,1 MAX [1.56] MAX OPERATING POINT 39,6 [1.62] OPERATING POINT 41,1 [1.56] MIN 14,7 [1.62] MTG PADS [2.800,3] OPPEORIANTTING [.58] 19,0 MTG PADS [2.800,3] OPPEOMRIAINNTTING [1.548,7] 19,0 31,4 [.75] [.75] [1.24] 31,4 [1.24] Ø25,4 [1.00] Ø25,4 [1.00] 7,9 7,9 [27.59,88] ACFR[L.O3A1TS]SS [25.93,44] [27.07,74] 89,7 ACF[LR.3AO1TS]SS [25.93,44] [3.53] 82,6 [3.25] CONDUIT OPENING 29,4 LOCATION [1.16] 41,1 CONDUIT OPENING 29,4 20,3 [1.62] LOCATION [1.16] [.80] 36,6 21,3 47,8 [1.44] 2X 5,2 [.20] Ø MTG HOLES [.84] [1.88] 39,0 [1.54] 38,1 44,4 TAPPED FRO2MX 1R0E-A32R UONNFLY [1.50] 45,3 TAPPED FRO2MX R1E0-A3R2 OUNNLFY [1.75] [1.78] 2X 5,2 [.20] Ø MTG HOLES 8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH LSW SPDT NON PLUG-IN PRODUCT DIMENSIONS LSW DPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) (FOR REFERENCE ONLY) Sensing and Internet of Things 27

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Figure 22. MICRO SWITCH HDLS LSG Series maintained Figure 23. MICRO SWITCH HDLS LSG Series maintained contact side plunger (single pole) dimensions contact side plunger (double pole) dimensions SPDT Plug-in (mm[in]) DPDT Plug-in (mm[in]) 76,2 76,2 [3.00] [3.00] MTG PADS [0 2.815,6] 37,5 [1.548,7] MTG PADS [2.815,6] [ 13.74,85] [1 1.546,7] [1.48] Ø9,47 OPERATING POINT 2X Ø 9,7 OPERATING POINT [.38] 20,32 [.38] 20,3 [.80] [.80] [1.795,0] 2 X [1n.0 205],4 [1.795,0] 2 X [ 1.Ø00 2]5,4 [141.699,1] 59,4 [ 27.49,59] [ 25.93,44] [ 27.07,74] [ 38.95,37] [2.34] [ 38.22,56] CONDUIT OPENING LOCATION 29,4 29,4 [1.16] CONLDOUCITA TOIPOENNING 16,5 [1.16] 18,8 [ 14.78,88] [.65] 41,1 [.74] [1 2.050,4] [1.62] 38,1 [1 2.064,4] TAPPED FR2OXM 1 R0-E3A2R U ONNFLY [1 .3594,]1 2X 5,2 [.20] Ø MTG HOLES [1.50] 45,3 29X,5 5[,.23 7[].2 Ø0 ]C Ø'B OMRTEG HX O7L,8E [S.3 1] DEPTH 44,5 2X 10-32 UNF [1.78] [1.75] TAPPED FROM REAR ONLY LSG DPDT PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) LSG SPDT PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) SPDT Non-plug-in (mm[in]) DPDT Non-plug-in (mm[in]) 76,2 [3.00] MTG PADS [ 37.60,02] MTG PADS [1.548,7] 21,6 14,7 21,6 [0.85] [1.56] [.85] 37,5 37,5 [1.48] [1.48] Ø 9,7 OPERATING POINT 2X Ø 9,7 20,3 OPERATING POINT [.38] 20,3 [.38] [.80] [.80] [1.795,0] [ 12.50,04] [1.795,0] 2 X [ 1Ø.0205],4 1[041.0,7] [ 27.59,88] [ 25.93,44] [ 27.07,74] [141.699,1] [ 38.95,37] [ 25.93,44] [ 38.22,56] 20,3 29,4 [.80] [1.16] 21,3 29,4 [.84] [1.16] 39,0 [1 3.464,6] [ 14.16,21] [1 .3580,]1 [ 14.78,88] [1.54] CONDUIT OPENING CONDUIT OPENING 44,4 2X 5,2 [.20] Ø MTG HOLES LOCATION [ 14.57,83] 2X 10-32 UNF LOCATION [1.75] TAPPED FROM REAR ONLY 2X 10-32 UNF TAPPED FROM REAR ONLY 2X 5,2 [.20] Ø MTG HOLES 8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH LSG DPDT NON PLUG-IN PRODUCT DIMENSIONS LSG SPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) (FOR REFERENCE ONLY) 28 sensing.honeywell.com

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Table 11. Wobbles • MICRO SWITCH HDLS Series Order Guide/Recommended Listings LSJ Series LSJ Series LSJ Series LSK Series 7A Actuator 7N Actuator 7M Actuator 8A-8C Actuator Plastic rod lever Flexible cable lever Spring wire lever - Cat whisker actuator for low Description (wobble stick) may be formed for operating force applications special needs S1nNapO A/1cNtiCon S1nNapO A/1cNtiCon S1nNapO A/1cNtiCon -8A** -8C 3 4 3 4 3 4 S1nNapO A/1cNtiCon S1nNapO A/1cNtiCon 102°°11-23-43-41-228° 0°11-23-43-41-22 0°11-23-43-41-22 0°131-23-43-41-224 0°131-23-43-41-224 20° 16° 20° 16° 15° 10° 25° 25° (cid:31) (cid:30) (cid:31) (cid:30) (cid:31) (cid:30) (cid:31) (cid:30) (cid:31) (cid:30) Contact closed n S2nNapO A/2cNtiCon S2nNapO A/2cNtiCon S2nNapO A/2cNtiCon S2nNapO A/2cNtiCon S2nNapO A/2cNtiCon Contact open o 13 24 13 24 13 24 13 24 13 24 0°571-2/5-63-4/7-83-4/7-81-2/5-668 0°571-2/5-63-4/7-83-4/7-81-2/5-668 0°571-2/5-63-4/7-83-4/7-81-2/5-668 0°571-2/5-63-4/7-83-4/7-81-2/5-668 0°571-2/5-63-4/7-83-4/7-81-2/5-668 10° 8° 15° 12° 20° 16° 20° 16° 25° 25° (cid:31) (cid:30) (cid:31) (cid:30) (cid:31) (cid:30) (cid:31) (cid:30) (cid:31) (cid:30) Lever length 8A act.: 140 mm [5.5 in] SST Actuator: Actuator: Actuator: from top mount- 8C act.: 140 mm [5.5 in] 140 mm [5.5 in] 140 mm [5.5 in] 330 mm [13 in] ing hole steel plated Pretravel 25,4 mm [1.0 in] 38,0 mm [1.5 in] 102 mm [4.0 in] 51,0 mm [2.0 in] LSJ1A-7A LSJ1A-7M LSJ1A-7N LSK1A- LSK1A- Oper. force 2,78 Nm [10 oz] 1,95 Nm [7 oz] 1,39 Nm [5 oz] 8A: 1,39 Nm [5 oz]; - Plastic - Spring - Flexible 8A - Cat 8C - Coil 8C: 1,95 Nm [7 oz] rod wire actuator whisker spring Op. temp range3 -12°C to 93°C [10°F to 200°F] (for low temp, high temp, or preleaded versions, see pages 8-9) Circuitry Contacts Body Style2 Conduit Options (NPT) (cid:31) (cid:29) Silver Plug-in 0.5 in LSJ1A-7A LSJ1A-7N LSJ1A-7M LSK1A-8A LSK1A-8C Gold4 Plug-in 0.5 in LSJ1E-7A – LSJ1E-7M LSK1E-8A LSK1E-8C T PD (cid:30) (cid:28) Silver Plug-in 0.5 in 120 V Ind. lite1 LSJ5A-7A LSJ5A-7N LSJ5A-7M LSK5A-8A LSK5A-8C S SPDT Double Break Silver Plug-in 0.5 in 240 V Ind. lite1 LSJ8A-7A LSJ8A-7N LSJ8A-7M LSK8A-8A LSK8A-8C Silver Non-plug-in 0.5 in LSJ3K-7A LSJ3K-7N LSJ3K-7M LSK3K-8A LSK3K-8C (cid:27) (cid:31) Silver Plug-in 0.75 in LSJ2B-7A LSJ2B-7N LSJ2B-7M LSK2B-8A LSK2B-8C Silver Plug-in 0.5 in LSJ6B-7A LSJ6B-7N LSJ6B-7M LSK6B-8A LSK6B-8C (cid:26) (cid:30) T D Silver Plug-in 0.75 in 120 V Ind. lite1 LSJ2R-7A LSJ2R-7N LSJ2R-7M LSK2R-8A LSK2R-8C P D (cid:25) (cid:29) Silver Non-plug-in 0.75 in LSJ4L-7A LSJ4L-7N LSJ4L-7M LSK4L-8A LSK4L-8C (cid:24) (cid:28) DPDT Silver Non-plug-in 0.5 in LSJ7L-7A LSJ7L-7N LSJ7L-7M LSK7L-8A LSK7L-8C Double Break 1 Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 93°C [200°F]; 2 Plug-in listings include base receptacle 3 Completely fluorocarbon sealed switches are preferred for use in temperatures above 93°C [200°F]; 4 Gold-plated contacts ** These cat whiskers have a 140 mm [5.5 in] long actuator. To specify a 190 mm [7.5 in] length actuator, substitute -8B for -8A. NOTE: Same polarity each pole. To order a fluorocarbon sealed switch, insert the letters Y and C into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAC1A limit switch. To order a low temperature, fluorosilicone sealed switch, insert the letters Y and B into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAB1A limit switch. Sensing and Internet of Things 29

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Figure 24. MICRO SWITCH HDLS LSJ_ _-7A Series wobble Figure 25. MICRO SWITCH HDLS LSJ_ _-7A Series wobble (single pole) dimensions (double pole) dimensions 23,6 39,6 [2.815,6] Ø6,4 [1.56] [1.548,7] [2.815,6] Ø [.265,4] [1.56] [1.548,7] [.25] SPDT Plug-in DPDT Plug-in (mm[in]) (mm[in]) 139,7 139,7 [5.50] [5.50] MTG P ADS 1[.56,02] [26.35,05] 1[.56,02] [26.35,05] MTG PADS 26,4 [1.04] 26,4 [1.04] 59,5 [2.34] 59,4 82,6 [27.49,59] [2.34] [27.07,74] [38.95,37] [3.25] CONDUIT OPENING 29,4 LOCATION [1.16] CONDUIT OPENING 29,4 LOCATION [1.665,5] [14.11,61] [1.784,8] [14.78, 88] 25,4 [1.62] 26,4 [1.00] [1.04] 2X 10-32 UNF 39,0 38,1 TAPPED FROM REAR ONLY [1.54] 2X 5,2 [.20] Ø MTG HOLES [1.50] 45,3 44,5 [1.78] 2X 5,2 [.20] Ø MTG HOLES [1.75] 2X 10-32 UNF 9,5 [.37] Ø C'BORE X 7,8 [.31] DEPTH TAPPED FROM REAR ONLY DIMS: MM DIMS: MM [IN] [IN] LSJ PLASTIC ROD DPDT PLUG-IN PRODUCT DIMENSIONS SPDT Non-plug-in DPDT Non-plug-in LSJ PLASTIC ROD SPDT PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) (mm[in]) (mm[in]) (FOR REFERENCE ONLY) 39,6 [1.56] 39,6 21,6 14,7 [2.815,6] Ø6,4 [1.56] [1.548,7] [.85] Ø [ .62,54] [.58] [.25] 139,7 [5.50] 139,7 [5.50] 15,2 MTG P ADS 1[.56,02] [26.35,05] MTG P ADS [.60] [26.35,05] [12.60,44] 26,4 [1.04] 59,5 [2.34] 89,7 82,6 [27.59,88] [25.93,44] [27.07,74] [3.53] [3.25] 29,4 CONDUIT OPENING [12.91,64] CONDLOUCITA OTIPOENNING [1.16] LOCATION 36,[26.800,3] [14.16,21] [2.814,3] [14.78,88] [1.44] 38,1 [13.594,0] 2X 5,2 [.20] Ø MTG HOLES [1.50] 45,3 TAPPED FRO2MX 1R0E-A32R UONNFLY 44,4 [1.78] [1.75] 2X 10-32 UNF 2X 5,2 [.20] Ø MTG HOLES TAPPED FROM REAR ONLY DIMS: MM 8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH DIMS: MM [IN] [IN] LSJ PLASTIC ROD DPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) LSJ PLASTIC ROD SPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) 30 sensing.honeywell.com

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Figure 26. MICRO SWITCH HDLS LSJ_ _-7N Series wobble Figure 27. MICRO SWITCH HDLS LSJ_ _-7N Series wobble (single pole) dimensions (double pole) dimensions [.2815,06] [13.596,6] 14,7 [2.815,6] [13.596,6] 14.7 Ø4,75 [.58] 6,4 [.58] [.187] [.25] SPDT Plug-in DPDT Plug-in (mm[in]) (mm[in]) 139.7 139,7 [5.50] [5.50] MTG PADS 15,2 15,2 63,5 [.60] 63,5 [.60] [2.50] MTG PADS [2.50] 26,4 [1.04] 59,4 59,5 [27.49,59] [2.34] [27.07,74] [2.34] [38.22,56] 89,7 [3.53] 29,4 CONDUIT OPENING [1.16] CONDUIT OPENING LOCATION 16,5 LOCATION 29,4 [.65] 41,1 [1.16] 25,4 [1.62] 18,8 [1.00] [.74] 47,8 39,0 26,4 [1.88] [1.54] 44,5 2X 5,2 [.20] Ø MTG2 HXO 1L0E-3S2 UNF [1.3580,]1[1.04] TAPPED FRO2MX 1R0E-A32R UONNFLY [1.75] TAPPED FROM REAR ONLY 45,3 2X 5,2 [.20] Ø MTG HOLES [1.78] 9,5 [.37] Ø C'BORE X 7,8 [.31] DEPTH DIMS: MM [IN] DIMS: MM [IN] LSJ FLEXIBLE CABLE SPDT PLUG-IN PRODUCT DIMENSIONS LSJ FLEXIBLE CABLE DPDT PLUG-IN PRODUCT DIMENSIONS SPDT Non-pl(uFOgR-i RnE FERENCE ONLY) DPDT Non-(FpOluRg R-EinFE RENCE ONLY) (mm[in]) (mm[in]) 21,6 39,6 [13.596,6] [.850] [1.56] 14,7 21,6 14,7 [.58] [.85] 6,4 [.58] Ø4.75 [.25] [1.87] 139,7 [5.5] 139,7 [5.50] MTG PADS 63,5 15,2 [2.50] MTG P ADS [.60] [26.35,05] [12.60,44] 59,4 [38.95.37] [2.34] [38.22,56] [27.59,88] [25.93,44] [27.07,74] CONDUIT OPENING LOCATION 29,4 [1.16] CONDLOUCITA OTIPOENNING [12.91,64] 21,3 47,8 [.84] [1.88] [2.800,3] [14.16,21] [1.3580,]1 2X 10-32 UNF 36,6 45,3 TAPPED FROM REAR ONLY [1.44] 2X 5,2 [.20] Ø MTG HOLES [1.78] 39,0 2X 5,2 [.20] Ø MTG HOLES [1.54] DIMS: MM 8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH 44,4 TAPPED FRO2MX 1R0E-A32R UONNFLY [IN] [1.75] DIMS: MM LSJ FLEXIBLE CABLE DPDT NON PLUG-IN PRODUCT DIMENSIONS [IN] (FOR REFERENCE ONLY) LSJ FLEXIBLE CABLE SPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) Sensing and Internet of Things 31

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Figure 28. MICRO SWITCH HDLS LSJ_ _-7M Series wobble Figure 29. MICRO SWITCH HDLS LSJ_ _-7M n2,0 (single pole) dimensions Series wobble (double pole) dimensions [.08] 21,6 Ø[.028,0] 21,6 [2.815,6] [13.596,6] [.85] [.85] 39,6 21,6 [1.56] [.85] SPDT Plug-in DPDT Plug-in (mm[in]) (mm[in]) 330,2 [13.00] 66,8 330,2 15,2 [2.63] [13.00] [.60] MTG PADS 66,8 MTG PADS 26,4 15,2 [2.63] [1.04] [.60] 26,4 [1.04] 59,5 [2.34] 82,6 [3.25] [27.49,59] [25.93,44] [27.07,74] [38.95,37] CONDUIT OPENING 29,4 29,4 LOCATION [1.16] CONDUIT OPENING [1.16] 47,8 LOCATION 16,5 41,1 18,8 [1.88] [.65] [1.62] [.74] 25,4 [1.00] 26,4 2X 10-32 UNF 39,0 [1.04] TAPPED FROM REAR ONLY [1.54] [14.47,55] 2X 5,2 [T.A20P]P ØE DM FTRGO 2HMXO 1RL0EE-SA3 2R UONNFLY [1.3580,]1 [14.57,83] 29X,5 5[,.23 7[].2 Ø0 ]C Ø'B OMRTEG HX O7L,8E [S.3 1] DEPTH DIMS: MM [IN] LSJ SPRING WIRE SPDT PLUG-IN PRODUCT DIMENSIONS SPDT Non-plug-in DPDT Non-plug-in (FOR REFERENCE ONLY) (mm[in]) (mm[in]) 2,0 [.08] 2,0 21,6 [.08] 21,6 21,6 [.85] 21,6 39,6 [.85] [.85] [13.596,6] [.85] [1.56] 330,2 330,2 [13.00] [13.00] 66,8 MTG PADS [26.66,38] MTG PADS 15,2 [2.63] 15,2 [.60] [.60] 26,4 26,4 [1.04] [1.04] 59,5 75,8 59,4 89,7 [2.34] 82,6 [2.98] [2.34] 70,4 [3.53] [3.25] [2.77] CONDUIT OPENING 29,4 CONDUIT OPENING 29,4 LOCATION [1.16] LOCATION 20,3 [1.16] [.80] 41,1 21,3 47,8 36,6 [1.44] [1.62] [.84] [1.88] 38,1 39,0 [1.50] 2X 10-32 UNF [1.54] 44,4 2X 5,2 [.20] Ø MTG HOLES [14.57,83] TAPPED FROM REAR ONLY [1.75] 2X 10-32 UNF 2X 5,2 [.20] Ø MTG HOLES TAPPED FROM REAR ONLY DIMS: MM 8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH [IN] DIMS: MM [IN] SCALE 1.000 32 sensing.honeywell.com

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Figure 31. MICRO SWITCH HDLS LSK_ _-8A Series wobble Figure 30. MICRO SWITCH HDLS LSK_ _-8A Series wobble (double pole) dimensions (single pole) dimensions 1,3 39,6 Ø1,3 39,6 [.05] [1.56] 14,7 [.05] [1.56] [2.815,6] [.58] 21,6 [1.548,7] [.85] SPDT Plug-in DPDT Plug-in (mm[in]) (mm[in]) 139,7 [5.50] 139,7 [5.50] MTG PADS 15,2 15,2 [.60] 65,0 [.60] 65,0 [2.56] [2.56] 26,4 MTG PADS 26,4 [1.04] [1.04] 74,9 59,4 59,5 [2.95] [2.34] 70,4 [2.34] [2.77] 82,6 [3.25] 89,7 [3.53] 29,4 CONDUIT OPENING [1.16] LOCATION [1.665,5] [14.16,21] CONDLOUCITA OTIPOENNING 18,8 [12.91,64] 25,4 [.74] 47,8 [1.00] 26,4 [1.88] 39,0 2X 5,2 [.20] Ø MTG HOLES [1.04] [1.54] 38,1 2X 10-32 UNF 44,5 2X 10-32 UNF [1.50] TAPPED FROM REAR ONLY [1.75] TAPPED FROM REAR ONLY [14.57,83] 2X 5,2 [.20] Ø MTG HOLES DIMS: MM 9,5 [.37] Ø C'BORE X 7,8 [.31] DEPTH [IN] LSSPKD CTA TN WoHnI-SpKlEuRg S-PinDT PLUG-IN PRODUCT DIMENSIONS DPDT Non-plug-in LSK CAT WHISKER DPDT PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) (mm[in]) (mm[in]) (FOR REFERENCE ONLY) Ø1,3 Ø1,3 21,6 [.05] [13.596,6] 14,7 21,6 [.05] [13.596,6] 14,7 [.85] [.58] [.85] [.58] 139,7 139,7 [5.50] [5.50] MTG P ADS 1[.56,02] 26,4 [26.55,60] MTG P ADS 1[.56,02] [12.60,44] [26.55,60] [1.04] 59,5 75,8 [25.93,44] [27.07,74] [38.95,37] [2.34] [38.22,56] [2.98] CONDUIT OPENING CONDUIT OPENING 29,4 LOCATION 29,4 LOCATION [1.16] 20,3 [1.16] 21,3 [.80] 41,1 [.84] 47,8 36,6 [1.62] [1.88] [1.44] 38,1 39,0 2X 5,2 [.20] Ø MTG HOLES [1.50] 2X 10-32 UNF [1.54] 45,3 TAPPED FROM REAR ONLY 44,4 [1.78] [1.75] 2X 10-32 UNF TAPPED FROM REAR ONLY 2X 5,2 [.20] Ø MTG HOLES 8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH LSJ CAT WHISKER DPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) LSJ CAT WHISKER SPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) Sensing and Internet of Things 33

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series Figure 32. MICRO SWITCH HDLS LSK_ _-8C Series wobble Figure 33. MICRO SWITCH HDLS LSK_ _-8C Series wobble (single pole) dimensions (double pole) dimensions 39,6 [2.18,560] [13.596,6] 14,7 [.82510,6] [1.56] [1.548,7] n6,35 [.58] Ø6,35 [.25] [.25] SPDT Plug-in DPDT Plug-in (mm[in]) (mm[in]) 140 140 [5.50] [5.50] MTG PADS 15,2 [.60] 15,2 [.60] MTG PADS 26,4 26,4 [1.04] [1.04] 59,5 [2.34] 59,4 82,6 74,9 [2.34] 70,4 [3.25] [2.95] [2.77] 89,7 [3.53] CONDUIT OPENING 29,4 29,4 LOCATION [1.16] CONDLOUCITA OTIPOENNING 16,5 [1.16] [14.78,88] [.65] [14.16,21] [1.784,8] 25,4 [1.00] 26,4 2X 10-32 UNF [13.594,0] 44,5 2X 5,2 [.20] Ø MTG HOLES [1.3580,[]11.04] 45,3 2X 5,2 [.20] TAØP MPETDG FHROOLME SR EAR ONLY [1.75] 2X 10-32 UNF [1.78] 9,5 [.37] Ø C'BORE X 7,8 [.31] DEPTH TAPPED FROM REAR ONLY DIMS: MM [IN] LSJ SPRING WIRE DPDT PLUG-IN PRODUCT DIMENSIONS SPDT Non-plug-in DPDT Non-plug-in LSK COIL SPRING SPDT PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) (mm[in]) (FOR RE[2.18F,56E0]RENCE ONLY) [13.596,6] 14,7 (mm[in]) [.82510,6] Ø6.35 [13.596,6] 14,7 Ø6,35 [.58] [.25] [.58] [.25] 140 140 [5.50] [5.50] 15,2 MTG PADS MTG PADS [.60] 15,2 [.60] 26,4 [12.60,44] [1.04] 59,5 [27.59,88] [25.93,44] [27.07,74] [2.34] [38.22,56] 89,7 [3.53] CONDUIT OPENING 29,4 LOCATION [1.16] CONDUIT OPENING 29,4 LOCATION [1.16] 36[2,.6800,3] [14.16,21] 38[2,.1814,3] [14.78,88] 39,0[1.44] 2X 5,2 [.20] Ø MTG HOLES [1.50] [14.57.83] 2X 10-32 UNF [1.54] TAPPED FROM REAR ONLY 44,4 2X 10-32 UNF [1.75] TAPPED FROM REAR ONLY 2X 5,2 [.20] Ø MTG HOLES 8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH LSK COIL WIRE DPDT NON PLUG-IN PRODUCT DIMENSIONS LSK COIL SPRING SPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) (FOR REFERENCE ONLY) 34 sensing.honeywell.com

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series SPECIAL APPLICATIONS High Capacity Limit Switch (cid:27) (cid:31) Features • High dc current ratings • 20 A rating at 120 Vac (single pole) (cid:31) (cid:29) (cid:26) (cid:30) • Plug-in or non-plug in • Positive retention lever arm (cid:25) (cid:29) • High resistance to seismic shock (cid:30) (cid:28) SPDT (cid:24) (cid:28) This series has a wide gap contact block Double Break DPDT Double Break that handles a higher make/break dc load. In addition, a special lever arm has Single Pole Double Pole a serrated shaft hole and a cap screw Voltage Resistive Inductive Resistive Inductive with locking nut for attaching the lever to the rotary shaft. Load Load Load Load This assures a firm grip on the operating shaft and positive 125 Vdc 2.0 A 1.0 A 1.0 A 0.4 A retention of the lever adjustment. 250 Vdc 0.7 A 0.4 A 0.4 A 0.2 A The need for precise operation, coupled with challenging 120 Vac 20 A 20 A 10 A 10 A environmental conditions places rigid demands on any 240 Vac 15 A 15 A 7.5 A 7.5 A control. Honeywell’s products are intended to satisfy these 480 Vac 10 A 10 A 5 A 5 A demands with its high capacity HDLS, designed to perform 600 Vac 5 A 5 A 2.5 A 2.5 A reliably under these conditions. Maximum operating rate - 15 operations per minute. Listings NOTE: Same polarity each pole. LSQ051 Double pole, non-plug-in, 5-67-87-85-6 0.75 in conduit 2/4/4/2/ 1-3-3-1- 0° LSQ052 Double pole, plug-in, 0.75 in conduit 9° 17° 75° (cid:31) (cid:30) LSQ053 Single pole, non-plug-in, 1-23-43-41-2 0.5 in conduit 0° LSQ054 Single pole, plug-in, 0.5 in 9° 17° conduit 75° (cid:31) (cid:30) LSZ616 Replacement lever for above listings Pretravel 17° max. Diff. travel 8° max. Overtravel 58° min. Oper. torque 0,45 Nm [4 in-lb] max. Action CW and CCW (spring return) Sensing and Internet of Things 35

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series SPECIAL APPLICATIONS Gravity Return Side Rotary Switches (LSS) Extra Low Torque Side Rotary Switches (LST) LSS1H gravity-return, side-rotary switches have no return LST1H extra-low torque, side-rotary switches have a low force spring mechanism. The weight of the actuating lever must pro- return spring and a maximim operation torque of 12 in-oz. It is vide the force to restore it to the free position. The 5 in-oz. max. rated as NEMA 1 due to an unsealed head. The switch cavity is operating torque is useful in conveyor applications since it sealed to protect the switch contacts. enables operation by small or lightweight objects. Because the head is unsealed, the LSS1H is classified as NEMA 1. However, LST1H the switch cavity is sealed to protect the switch contacts. Description Extra-low torque side rotary Circuitry SPDT, double break LSS1H Contacts Silver 0° 1-23-43-41-2 Description Gravity-return side Sealing NEMA 1 rotary 10° Electrical rating (B) NEMA B600 15° Circuitry SPDT, double break Body style Plug-in Contacts Silver Conduit (NPT) 0.5 in Sealing NEMA 1 Pretravel 15° max. Electrical rating (B) NEMA B600 Differential travel 5° max. Body style Plug-in Overtravel 60’ min. Conduit (NPT) 0.5 in Total travel 75° nom. 75° Differential travel 12° max. (cid:31) (cid:30) Operating torque 0,085 Nm [12 in-oz] max. Total travel (no stop)* 360° NOTE: Same polarity each pole. Operating torque 0,035 Nm [5 in-oz] max. * Switch has approximately 180° dwell of the normally closed and normally open switch contacts. NOTE: Same polarity each pole. 36 sensing.honeywell.com

MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series ALSO AVAILABLE Fully potted MICRO SWITCH HDLS heavy-duty limit switches provide an extra degree of protection in harsh environments by sealing the basic switch cavity with epoxy. These switches are the same as the non- plug-in HDLS except that the entire switch cavity is filled with epoxy in addition to the conduit entrance. The fully potted HDLS switches are pre-leaded, with either cable or connectors. • Excellent sealing capability for harsh-duty food and beverage wash downs and severe machine tool envi- ronments • Diaphragm sealing • 12 inch STOOW-A cable (other lengths available) or connector version • Cable versions: NEMA 1, 6, 6P, 12 • Connector versions: NEMA 1, 6, 6P, 12, 13 • All fluorocarbon seals (low temperature fluorosilicone seals available) • UL, CSA, CE, CCC MICRO SWITCH HDLS switches are also available in all stainless-steel versions. Designed for use in highly corrosive environments, such as petrochemical plants, food processing plants, shipboard, and dock- side locations. The type 316 cast stainless steel body is designed to minimize crevices where food particles could become trapped in water. The actuator, operating head, and screws are also stainless steel. All seals are fluorocarbon to provide excellent chemical resistance and to withstand operating temperatures up to 121°C [250°F] and pressurized steam cleaning. Pre-leaded and epoxy-filled versions also available. • Corrosion-resistant stainless steel non-plug in body, head, and rotary shaft • Stainless steel levers • Fluorocarbon seals (low temperature fluorosilicone seals available) • NEMA 1, 3, 3R, 4, 4X, 6, 6P, and 13 • UL, CSA, CE, CCC To learn more about Honeywell’s HDLS products, call +1-815-235-6847 or 1-800-537-6945. Sensing and Internet of Things 37

ADDITIONAL INFORMATION m WARNING The following associated literature is available on the Web at PERSONAL INJURY sensing.honeywell.com: DO NOT USE these products as safety or emergency stop • Product installation instructions devices or in any other application where failure of the • Product range guide product could result in personal injury. • Product nomenclature tree Failure to comply with these instructions could result in • Product application-specific information death or serious injury. – Application Note: Sensors and Switches in Oil Rig Applications m WARNING – Application Note: Sensors and Switches for Industrial MISUSE OF DOCUMENTATION Manual Process Valves • The information presented in this product sheet is for – Application Note: Sensors and Switches Used in Valve reference only. Do not use this document as a product Actuators and Valve Positioners installation guide. • Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Warranty/Remedy Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship during the appli- cable warranty period. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items that Honeywell, in its sole discretion, finds defec- tive. The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While Honeywell may provide application assistance personally, For more information through our literature and the Honeywell web site, it is buyer’s Honeywell Sensing and Internet of sole responsibility to determine the suitability of the product in Things services its customers through a the application. worldwide network of sales offices and Specifications may change without notice. The information we distributors. For application assistance, supply is believed to be accurate and reliable as of this writing. current specifications, pricing or the However, Honeywell assumes no responsibility for its use. nearest Authorized Distributor, visit sensing.honeywell.com or call: Asia Pacific +65 6355-2828 Europe +44 (0) 1698 481481 USA/Canada +1-800-537-6945 Honeywell Sensing and Internet of Things 9680 Old Bailes Road Fort Mill, SC 29707 002345-10-EN | 10 | 06/18 www. honeywell.com © 2018 Honeywell International Inc. All rights reserved.