Reference Only SpecNo.JELF243A-0024Y-01 P.1/11 CHIP COIL (CHIP INDUCTORS) LQW18AN□□□□00D REFERENCE SPECIFICATION 1.Scope This reference specification applies to LQW18AN_00 series, Chip coil (Chip Inductors). 2.Part Numbering (ex) LQ W 18 A N 2N2 D 0 0 D Product ID Structure Dimension Applications Category Inductance Tolerance Features Electrode Packaging (L×W) and D:Taping Characteristics *B:Bulk *Bulk packing also available. (A product is put in the plastic bag under the taping conditions.) 3.Rating ・Operating Temperature Range. –55°C to +125°C ・Storage Temperature Range. –55°C to +125°C Customer MURATA Inductance Q DC Self Resonant Rated Resistance Frequency Current Part Number Part Number (nH) Tolerance (min.) (Ω max.) (MHz min.) (mA) LQW18AN2N2D00D 2.2 D:±0.5nH 16 0.042 700 LQW18AN3N6C00D 3.6 25 LQW18AN3N6D00D LQW18AN3N9C00D C:±0.2nH 3.9 LQW18AN3N9D00D D:±0.5nH 0.059 850 LQW18AN4N3C00D 4.3 LQW18AN4N3D00D LQW18AN4N7D00D 4.7 D:±0.5nH LQW18AN5N6C00D 5.6 LQW18AN5N6D00D LQW18AN6N2C00D 6.2 LQW18AN6N2D00D 0.082 750 LQW18AN6N8C00D 6.8 LQW18AN6N8D00D LQW18AN7N5C00D C:±0.2nH 7.5 LQW18AN7N5D00D D:±0.5nH LQW18AN8N2C00D 6000 8.2 35 LQW18AN8N2D00D LQW18AN8N7C00D 8.7 LQW18AN8N7D00D LQW18AN9N1C00D 9.1 LQW18AN9N1D00D 0.11 650 LQW18AN9N5D00D 9.5 D:±0.5nH LQW18AN10NG00D 10 LQW18AN10NJ00D LQW18AN11NG00D 11 LQW18AN11NJ00D LQW18AN12NG00D 12 LQW18AN12NJ00D LQW18AN13NG00D 13 0.13 600 LQW18AN13NJ00D LQW18AN15NG00D G:±2% 15 LQW18AN15NJ00D J:±5% LQW18AN16NG00D 16 LQW18AN16NJ00D 5500 LQW18AN18NG00D 18 40 0.16 550 LQW18AN18NJ00D LQW18AN20NG00D 20 4900 LQW18AN20NJ00D LQW18AN22NG00D 22 0.17 4600 500 LQW18AN22NJ00D MURATA MFG.CO., LTD

Reference Only SpecNo.JELF243A-0024Y-01 P.2/11 Customer MURATA Inductance Q DC Self Resonant Rated Resistance Frequency Current Part Number Part Number (nH) Tolerance (min.) (Ω max.) (MHz min.) (mA) LQW18AN24NG00D 24 3800 500 LQW18AN24NJ00D 0.21 LQW18AN27NG00D 27 3700 440 LQW18AN27NJ00D LQW18AN30NG00D 30 3300 LQW18AN30NJ00D 0.23 420 LQW18AN33NG00D 33 40 3200 LQW18AN33NJ00D LQW18AN36NG00D 36 2900 LQW18AN36NJ00D 0.26 400 LQW18AN39NG00D 39 2800 LQW18AN39NJ00D LQW18AN43NG00D 43 2700 LQW18AN43NJ00D 0.29 380 LQW18AN47NG00D 47 2600 LQW18AN47NJ00D LQW18AN51NG00D 51 0.33 2500 370 LQW18AN51NJ00D LQW18AN56NG00D 56 38 0.35 2400 360 LQW18AN56NJ00D LQW18AN62NG00D 62 0.51 2300 280 LQW18AN62NJ00D LQW18AN68NG00D 68 0.38 2200 340 LQW18AN68NJ00D LQW18AN72NG00D 72 2100 LQW18AN72NJ00D 0.56 270 LQW18AN75NG00D 75 2050 LQW18AN75NJ00D LQW18AN82NG00D G:±2% 82 34 0.60 2000 250 LQW18AN82NJ00D J:±5% LQW18AN91NG00D 91 0.64 1900 230 LQW18AN91NJ00D LQW18ANR10G00D 100 0.68 1800 220 LQW18ANR10J00D LQW18ANR11G00D 110 1.2 1700 200 LQW18ANR11J00D LQW18ANR12G00D 120 1.3 1600 180 LQW18ANR12J00D LQW18ANR13G00D 130 32 1.4 1450 170 LQW18ANR13J00D LQW18ANR15G00D 150 1.5 1400 160 LQW18ANR15J00D LQW18ANR16G00D 160 2.1 1350 150 LQW18ANR16J00D LQW18ANR18G00D 180 2.2 1300 140 LQW18ANR18J00D LQW18ANR20G00D 200 25 2.4 1250 LQW18ANR20J00D 120 LQW18ANR22G00D 220 2.5 1200 LQW18ANR22J00D LQW18ANR27G00D 270 3.4 960 110 LQW18ANR27J00D LQW18ANR33G00D 330 5.5 85 LQW18ANR33J00D 30 800 LQW18ANR39G00D 390 6.2 80 LQW18ANR39J00D LQW18ANR47G00D 470 7.0 700 75 LQW18ANR47J00D MURATA MFG.CO., LTD

Reference Only SpecNo.JELF243A-0024Y-01 P.3/11 4. Testing Conditions 《Unless otherwise specified》 《In case of doub t》 Temperature : Ordinary Temperature / 15°C to 35°C Temperature : 20°C±2°C Humidity : Ordinary Humidity / 25%(RH) to 85%(RH) Humidity : 60%(RH) to 70%(RH) Atmospheric Pressure : 86kPa to 106 kPa 5. Appearance and Dimensions 1.6±0.2 2 0. ± 8 x. ■Unit Mass (Typical value) 0. ma 0.003g 4 0. 2 0. ± 8 0. 5 0.1 1 ± ±0. 0.2 (in mm) 8 0. 0.3±0.1 0.3±0.1 6.Electrical Performance No. Item Specification Test Method 6.1 Inductance Inductance shall meet item 3. Measuring Equipment: KEYSIGHT E4991A or equivalent Measuring Frequency: <Inductance> 100MHz <Q> 250MHz/ 2.2nH~39nH 200MHz/ 43nH~68nH 150MHz/ 72nH~160nH 100MHz/ 180nH~470nH Measuring Condition: Test signal level / about 0dBm Electrode spaces / 1.0mm Electrical length / 0.94cm Measuring Fixture: KEYSIGHT 16193A 6.2 Q Q shall meet item 3. Position coil under test as shown in below and contact coil with each terminal by adding weight. 1mm 6.97mm Measuring Method:See the endnote. <Electrical Performance:Measuring Method of Inductance/Q> 6.3 DC Resistance DC Resistance shall meet item 3. Measuring Equipment:Digital multi meter 6.4 Self Resonant S.R.F shall meet item 3. Measuring Equipment: Frequency(S.R.F) KEYSIGHT N5230A or equivalent 6.5 Rated Current Self temperature rise shall be The rated current is applied. limited to 20°C max. Inductance Change: within ±10% MURATA MFG.CO., LTD

Reference Only SpecNo.JELF243A-0024Y-01 P.4/11 7.Mechanical Performance No. Item Specification Test Method 7.1 Shear Test Chip coil shall not be damaged Substrate:Glass-epoxy substrate after tested as test method. ChipCoil 2.2 Pattern Solderresist Substrate 0.7 0.7 (in mm) Chip Coil Applied Direction: F Substrate Force:5N Hold Duration:5s±1s 7.2 Bending Test Substrate:Glass-epoxy substrate (100mm×40mm×1.6mm) Speed of Applying Force:1mm / s Deflection:2mm Hold Duration:30s Pressurejig R340 F Deflection 45 45 (in mm) Product 7.3 Vibration Chip coil shall not be damaged Oscillation Frequency: after tested as test method. 10Hz~55Hz~10Hz for 1 min Total Amplitude:1.5mm Testing Time: A period of 2 hours in each of 3 mutually perpendicular directions. 7.4 Solderability The wetting area of the electrode Flux:Ethanol solution of rosin,25(wt)% shall be at least 90% covered with Includes activator equivalent to 0.06(wt)% new solder coating. chlorine.(immersed for 5s to 10s) Solder:Sn-3.0Ag-0.5Cu Pre-Heating:150°C±10°C / 60s to 90s Solder Temperature:240°C±5°C Immersion Time:3s±1s 7.5 Resistance to Appearance:No damage Flux:Ethanol solution of rosin,25(wt)% Soldering Heat Inductance Change: within ±5% Includes activator equivalent to 0.06(wt)% Chlorine.(immersed for 5s to 10s) Solder:Sn-3.0Ag-0.5Cu Pre-Heating:150°C±10°C / 60s to 90s Solder Temperature:270°C±5°C Immersion Time:10s±1s Then measured after exposure in the room condition for 24h±2h. MURATA MFG.CO., LTD

Reference Only SpecNo.JELF243A-0024Y-01 P.5/11 8.Environmental Performance It shall be soldered on the substrate. No. Item Specification Test Method 8.1 Heat Resistance Appearance:No damage Temperature:125°C±2°C Inductance Change: within ±5% Time:1000h (+48h,0h) Q Change: within ±20% Then measured after exposure in the room condition for 24h±2h. 8.2 Cold Resistance Appearance:No damage Temperature:-55°C±2°C Inductance Change: within ±5% Time:1000h (+48h,-0h) Q Change: within ±20% Then measured after exposure in the room condition for 24h±2h. 8.3 Humidity Temperature:40°C±2°C Humidity:90%(RH) to 95%(RH) Time:1000h (+48h,-0h) Then measured after exposure in the room condition for 24h±2h. 8.4 Temperature 1 cycle: Cycle 1 step:-55°C±2°C / 30min±3 min 2 step:Ordinary temp. / 10min to 15 min 3 step:+125°C±2°C / 30min±3 min 4 step:Ordinary temp. / 10min to15 min Total of 10 cycles Then measured after exposure in the room condition for 24h±2h. 9.Specification of Packaging 9.1 Appearance and Dimensions of paper tape (8mm-wide) 2.0±0.05 4.0±0.1 4.0±0.1 φ1.5±00.1 1.75±0.1 5 0 . 0 05 5± 0.2 0. 3. ± ± 0 .8 8. 1 1.0±0.05 (in mm) Direction of feed 1.1 max. 9.2 Specification of Taping (1) Packing quantity (standard quantity) 4,000 pcs. / reel (2) Packing Method Products shall be packed in the cavity of the base tape and sealed by top tape and bottom tape. (3) Sprocket hole The sprocket holes are to the right as the tape is pulled toward the user. (4) Spliced point Base tape and Top tape has no spliced point. (5) Missing components number Missing components number within 0.1 % of the number per reel or 1 pc., whichever is greater, and are not continuous. The Specified quantity per reel is kept. 9.3 Pull Strength Top tape 5N min. Bottom tape MURATA MFG.CO., LTD

Reference Only SpecNo.JELF243A-0024Y-01 P.6/11 9.4 Peeling off force of cover tape Speed of Peeling off 300mm/min 165 to 180 degree F Top tape 0.1N to 0.6N Peeling off force (minimum value is typical) Bottom tape Base tape 9.5 Dimensions of Leader-tape,Trailer and Reel There shall be leader-tape ( top tape and empty tape) and trailer-tape (empty tape) as follows. Trailer 160min. Leader 2.0±0.5 Label 190min. 2 10min. Emptytape Toptape φ13.0±0.2 φ60+-10 Directionoffeed φ21.0±0.8 9.0+1 -0 (in mm) 13.0±1.4 φ180+-30 9.6 Marking for reel Customer part number, MURATA part number, Inspection number(∗1) ,RoHS Marking (∗2), Quantity etc ･･･ ∗1) <Expression of Inspection No.> □□ OOOO ××× (1) (2) (3) (1) Factory code (2) Date First digit: Year / Last digit of year Second digit: Month / Jan. to Sep. → 1 to 9, Oct. to Dec. → O, N, D Third, Fourth digit : Day (3) Serial No. ∗2) <Expression of RoHS Marking > ROHS – Y (△) (1) (2) (1) RoHS regulation conformity parts. (2) MURATA classification number 9.7 Marking for Outside package (corrugated paper box) Customer name, Purchasing order number, Customer part number, MURATA part number, RoHS Marking (∗2) ,Quantity, etc ･･･ 9.8. Specification of Outer Case Outer Case Dimensions Standard Reel Quantity (mm) Label in Outer Case (Reel) W D H H 186 186 93 5 D ∗ Above Outer Case size is typical. It depends on a quantity of an order. W 10. ！ Caution Limitation of Applications Please contact us before using our products for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property. (1) Aircraft equipment (6) Transportation equipment (vehicles, trains, ships, etc.) (2) Aerospace equipment (7) Traffic signal equipment (3) Undersea equipment (8) Disaster prevention / crime prevention equipment (4) Power plant control equipment (9) Data-processing equipment (5) Medical equipment (10) Applications of similar complexity and /or reliability requirements to the applications listed in the above MURATA MFG.CO., LTD

Reference Only SpecNo.JELF243A-0024Y-01 P.7/11 11. Notice Products can only be soldered with reflow. This product is designed for solder mounting. Please consult us in advance for applying other mounting method such as conductive adhesive. 11.1 Land pattern designing Recommended land patterns for reflow soldering are as follows: These have been designed for Electric characteristics and solderability. Please follow the recommended patterns. Otherwise, their performance which includes electrical performance or solderability may be affected, or result to "position shift" in soldering process. ChipCoil Land c Solderresist A 0.6 to 0.8 B 1.9 to 2.0 a C 0.7 to 1.0 (in mm) b 11.2 Flux, Solder ・Use rosin-based flux. Includes middle activator equivalent to 0.06(wt)% to 0.1(wt)% Chlorine. Don’t use highly acidic flux with halide content exceeding 0.2(wt)% (chlorine conversion value). Don’t use water-soluble flux. ・Use Sn-3.0Ag-0.5Cu solder. ・Standard thickness of solder paste : 100μm to 150μm. 11.3 Reflow soldering conditions ・Pre-heating should be in such a way that the temperature difference between solder and product surface is limited to 150°C max. Cooling into solvent after soldering also should be in such a way that the temperature difference is limited to 100°C max. Insufficient pre-heating may cause cracks on the product, resulting in the deterioration of products quality. ・Standard soldering profile and the limit soldering profile is as follows. The excessive limit soldering conditions may cause leaching of the electrode and / or resulting in the deterioration of product quality. ・Reflow soldering profile T(e℃mp). 260℃ 245℃±3℃ 230℃ 220℃ Limit Profile 180 150 30s～60s Standard Profile 60s max. 90s±30s Time.(s) Standard Profile Limit Profile Pre-heating 150°C～180°C 、90s±30s Heating above 220°C､30s～60s above 230°C､60s max. Peak temperature 245°C±3°C 260°C,10s Cycle of reflow 2 times 2 times MURATA MFG.CO., LTD

Reference Only SpecNo.JELF243A-0024Y-01 P.8/11 11.4 Reworking with soldering iron The following conditions must be strictly followed when using a soldering iron. Pre-heating 150°C,1 min Tip temperature 350°C max. Soldering iron output 80W max. Tip diameter φ3mm max. Soldering time 3(+1,-0)s Time 2 times Note :Do not directly touch the products with the tip of the soldering iron in order to prevent the crack on the products due to the thermal shock. 11.5 Solder Volume ・Solder shall be used not to be exceeded the upper limits as shown below. ・Accordingly increasing the solder volume, the mechanical stress to Chip is also increased. Exceeding solder volume may cause the failure of mechanical or electrical performance. UpperLimit Recommendable(t) 1/3T≦t≦T T T：thickness of product 11.6 Product’s location The following shall be considered when designing and laying out P.C.B.'s. (1) P.C.B. shall be designed so that products are not subject to the mechanical stress due to warping the board. ［Products direction］ a Products shall be located in the sideways b direction (Length:a＜b) to the mechanical stress. 〈Poorexample〉 〈Goodexample〉 (2) Components location on P.C.B. separation. It is effective to implement the following measures, to reduce stress in separating the board. It is best to implement all of the following three measures; however, implement as many measures as possible to reduce stress. Contents of Measures Stress Level (1) Turn the mounting direction of the component parallel to the board separation surface. A > D *1 (2) Add slits in the board separation part. A > B (3) Keep the mounting position of the component away from the board separation surface. A > C C Seam B D b A Slit Length:a<b a *1 A > D is valid when stress is added vertically to the perforation as with Hand Separation. If a Cutting Disc is used, stress will be diagonal to the PCB, therefore A > D is invalid. MURATA MFG.CO., LTD

Reference Only SpecNo.JELF243A-0024Y-01 P.9/11 (3) Mounting Components Near Screw Holes When a component is mounted near a screw hole, it may be affected by the board deflection that occurs during the tightening of the screw. Mount the component in a position as far away from the screw holes as possible. 11.7 Cleaning Conditions Products shall be cleaned on the following conditions. (1) Cleaning temperature shall be limited to 60°C max.(40°C max for IPA) (2) Ultrasonic cleaning shall comply with the following conditions with avoiding the resonance phenomenon at the mounted products and P.C.B. Power : 20 W / l max. Frequency : 28kHz to 40kHz Time : 5 min max. (3) Cleaner 1. Alcohol type cleaner Isopropyl alcohol (IPA) 2. Aqueous agent PINE ALPHA ST-100S (4) There shall be no residual flux and residual cleaner after cleaning. In the case of using aqueous agent, products shall be dried completely after rinse with de-ionized water in order to remove the cleaner. (5) Other cleaning Please contact us. 11.8 Resin coating The inductance value may change due to high cure-stress of resin to be used for coating/molding products. An open circuit issue may occur by mechanical stress caused by the resin, amount/cured shape of resin, or operating condition etc. Some resin contains some impurities or chloride possible to generate chlorine by hydrolysis under some operating condition may cause corrosion of wire of coil, leading to open circuit. So, please pay your careful attention in when you select resin in case of coating/molding the products with the resin. Prior to use the coating resin, please make sure no reliability issue is observed by evaluating products mounted on your board. 11.9 Caution for use ・Sharp material such as a pair of tweezers or other material such as bristles of cleaning brush , shall not be touched to the winding portion to prevent the breaking of wire. ・Mechanical shock should not be applied to the products mounted on the board to prevent the breaking of the core. 11.10 Notice of product handling at mounting In some mounting machines,when picking up components support pin pushes up the components from the bottom of base tape. In this case, please remove the support pin. The support pin may damage the components and break wire. In rare case ,the laser recognition can not recognize this component. Please contact us when you use laser recognition. (There is no problem with the permeation and reflection type.) 11.11 Handling of a substrate After mounting products on a substrate, do not apply any stress to the product caused by bending or twisting to the substrate when cropping the substrate, inserting and removing a connector from the substrate or tightening screw to the substrate. Excessive mechanical stress may cause cracking in the product. Bending Twisting MURATA MFG.CO., LTD

Reference Only SpecNo.JELF243A-0024Y-01 P.10/11 11.12 Storage and Handing Requirements (1) Storage period Use the products within 12 months after delivered. Solderability should be checked if this period is exceeded. (2) Storage conditions ・Products should be stored in the warehouse on the following conditions. Temperature ： -10°C to 40°C Humidity ： 15% to 85% relative humidity No rapid change on temperature and humidity ・Don't keep products in corrosive gases such as sulfur,chlorine gas or acid, or it may cause oxidization of electrode, resulting in poor solderability. ・Products should not be stored on bulk packaging condition to prevent the chipping of the core and the breaking of winding wire caused by the collision between the products. ・Products should be stored on the palette for the prevention of the influence from humidity, dust and so on. ・Products should be stored in the warehouse without heat shock, vibration, direct sunlight and so on. (3) Handling Condition Care should be taken when transporting or handling product to avoid excessive vibration or mechanical shock. 12．! Note (1)Please make sure that your product has been evaluated in view of your specifications with our product being mounted to your product. (2)You are requested not to use our product deviating from the reference specifications. (3)The contents of this reference specification are subject to change without advance notice. Please approve our product specifications or transact the approval sheet for product specifications before ordering. MURATA MFG.CO., LTD

Reference Only SpecNo.JELF243A-0024Y-01 P.11/11 <Electrical Performance:Measuring Method of Inductance/Q> (1) Residual elements and stray elements of test fixture can be described by F-parameter shown in following. I1 I2 A B V A B V Zm V1 V2 Zx I 11 = C D I 22 C D Test Head Test fixture Product (2) The impedance of chip coil Zx and measured value Zm can be described by input/output current/voltage. V V Zm= 1 ， Zx= 2 I 1 I 2 (3) Thus,the relation between Zx and Zm is following; Zm-β where, α= D / A =1 Zx= α 1-ZmΓ β= B / D =Zsm-(1-Yom Zsm)Zss Γ= C / A =Yom Zsm : measured impedance of short chip Zssa: residual impedance of short chip (0.771nH) Yom: measured admittance when opening the fixture (4) Lx and Qx shall be calculated with the following equation. Im(Zx) Im(Zx) Lx :Inductance of chip coil Lx= , Qx = 2πf Re(Zx) Qx :Q of chip coil f :Measuring frequency MURATA MFG.CO., LTD