Reference Only Spec No. JELF243B-0010S-01 P.1/11 CHIP COIL (CHIP INDUCTORS) LQG15HS□□□□02D REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQG15HS_02 series, for Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ G 15 H S 1N0 S 0 2 D Product ID Structure Dimension Applications Category Inductance Tolerance Features Electrode Packaging (L×W) and D:Taping Characteristics *B:BULK *Bulk packing (B) also available 3. Rating ・Operating Temperature Range –55°C to +125°C ・Storage Temperature Range –55°C to +125°C DC Self Resonant Rated Customer MURATA Inductance Q Tolerance Resistance Frequency Current Part Number Part Number (nH) (min.) (Ω max. ) (MHz min. ) (mA) LQG15HS1N0B02D LQG15HS1N0C02D 1.0 10000 LQG15HS1N0S02D LQG15HS1N1B02D LQG15HS1N1C02D 1.1 LQG15HS1N1S02D LQG15HS1N2B02D LQG15HS1N2C02D 1.2 LQG15HS1N2S02D 0.07 1000 LQG15HS1N3B02D LQG15HS1N3C02D 1.3 LQG15HS1N3S02D LQG15HS1N5B02D LQG15HS1N5C02D 1.5 LQG15HS1N5S02D LQG15HS1N6B02D LQG15HS1N6C02D 1.6 LQG15HS1N6S02D LQG15HS1N8B02D LQG15HS1N8C02D 1.8 0.08 950 B:±0.1nH LQG15HS1N8S02D C:±0.2nH 8 LQG15HS2N0B02D S:±0.3nH LQG15HS2N0C02D 2.0 6000 LQG15HS2N0S02D 0.09 900 LQG15HS2N2B02D LQG15HS2N2C02D 2.2 LQG15HS2N2S02D LQG15HS2N4B02D LQG15HS2N4C02D 2.4 0.11 850 LQG15HS2N4S02D LQG15HS2N7B02D LQG15HS2N7C02D 2.7 0.12 LQG15HS2N7S02D LQG15HS3N0B02D LQG15HS3N0C02D 3.0 800 LQG15HS3N0S02D 0.125 LQG15HS3N3B02D LQG15HS3N3C02D 3.3 LQG15HS3N3S02D LQG15HS3N6B02D LQG15HS3N6C02D 3.6 0.14 750 LQG15HS3N6S02D MURATA MFG.CO., LTD

Reference Only Spec No. JELF243B-0010S-01 P.2/11 DC Self Resonant Rated Customer MURATA Inductance Q Tolerance Resistance Frequency Current Part Number Part Number (nH) (min.) (Ω max. ) (MHz min. ) (mA) LQG15HS3N9B02D LQG15HS3N9C02D 3.9 LQG15HS3N9S02D 0.14 750 LQG15HS4N3B02D LQG15HS4N3C02D 4.3 6000 LQG15HS4N3S02D LQG15HS4N7B02D LQG15HS4N7C02D 4.7 0.16 700 B:±0.1nH LQG15HS4N7S02D C:±0.2nH LQG15HS5N1B02D S:±0.3nH LQG15HS5N1C02D 5.1 5300 LQG15HS5N1S02D 0.18 650 LQG15HS5N6B02D LQG15HS5N6C02D 5.6 LQG15HS5N6S02D LQG15HS6N2B02D LQG15HS6N2C02D 6.2 0.20 4500 LQG15HS6N2S02D 600 LQG15HS6N8G02D LQG15HS6N8H02D 6.8 0.22 LQG15HS6N8J02D LQG15HS7N5G02D LQG15HS7N5H02D 7.5 4200 LQG15HS7N5J02D 0.24 550 LQG15HS8N2G02D LQG15HS8N2H02D 8.2 3700 LQG15HS8N2J02D 8 LQG15HS9N1G02D LQG15HS9N1H02D 9.1 LQG15HS9N1J02D 0.26 3400 LQG15HS10NG02D LQG15HS10NH02D 10 500 LQG15HS10NJ02D LQG15HS12NG02D LQG15HS12NH02D 12 0.28 3000 G:±2% LQG15HS12NJ02D H:±3% LQG15HS15NG02D J:±5% LQG15HS15NH02D 15 0.32 2500 450 LQG15HS15NJ02D LQG15HS18NG02D LQG15HS18NH02D 18 0.36 2200 400 LQG15HS18NJ02D LQG15HS22NG02D LQG15HS22NH02D 22 0.42 1900 LQG15HS22NJ02D LQG15HS27NG02D LQG15HS27NH02D 27 0.46 1700 350 LQG15HS27NJ02D LQG15HS33NG02D LQG15HS33NH02D 33 0.58 1600 LQG15HS33NJ02D LQG15HS39NG02D LQG15HS39NH02D 39 0.65 1200 300 LQG15HS39NJ02D MURATA MFG.CO., LTD

Reference Only Spec No. JELF243B-0010S-01 P.3/11 DC Self Resonant Rated Customer MURATA Inductance Q Tolerance Resistance Frequency Current Part Number Part Number (nH) (min.) (Ω max. ) (MHz min. ) (mA) LQG15HS47NG02D LQG15HS47NH02D 47 0.72 1000 300 LQG15HS47NJ02D LQG15HS56NG02D LQG15HS56NH02D 56 0.82 800 250 LQG15HS56NJ02D LQG15HS68NG02D LQG15HS68NH02D 68 0.92 800 250 LQG15HS68NJ02D LQG15HS82NG02D LQG15HS82NH02D 82 1.20 700 LQG15HS82NJ02D LQG15HSR10G02D LQG15HSR10H02D 100 G:±2% 1.25 200 LQG15HSR10J02D H:±3% 8 600 LQG15HSR12G02D J:±5% LQG15HSR12H02D 120 1.30 LQG15HSR12J02D LQG15HSR15G02D LQG15HSR15H02D 150 2.99 550 LQG15HSR15J02D 150 LQG15HSR18G02D LQG15HSR18H02D 180 3.38 500 LQG15HSR18J02D LQG15HSR22G02D LQG15HSR22H02D 220 3.77 450 120 LQG15HSR22J02D LQG15HSR27G02D LQG15HSR27H02D 270 4.94 400 110 LQG15HSR27J02D 4. Testing Conditions 《Unless otherwise specified》 《In case of doubt》 Temperature : Ordinary Temperature / 15°C to 35°C Temperature : 20°C ± 2°C Humidity : Ordinary Humidity / 25%(RH) to 85%(RH) Humidity : 60%(RH) to 70%(RH) Atmospheric Pressure : 86kPa to 106 kPa 5. Appearance and Dimensions Polarity Marking Electrode 0.5±0.05 1.0±0.05 ■Unit Mass (Typical value) 0.001g 0.5±0.05 0.5±0.0.5 0.25±0.1 (in mm) MURATA MFG.CO., LTD

Reference Only Spec No. JELF243B-0010S-01 P.4/11 6. Electrical Performance No. Item Specification Test Method 6.1 Inductance Inductance shall meet item 3. Measuring Equipment: KEYSIGHT E4991A or equivalent Measuring Frequency: 100MHz Measuring Condition: Test signal level/ about 0dBm Electrode spaces / 0.5mm Electricallength/ 10mm Weight/about 1N to 5N Measuring Fixture: KEYSIGHT 16197A Position coil under test as shown in below and contact coil with each terminal by adding weight. Polarity marking should be a topside,and polarity marking should be in the direction of the fixture for position of chip coil. 6.2 Q Q shall meet item 3. 0.5mm PolarityMarking 11.5mm Measuring Method: the endnote [Electrical Performance:Measuring Method of Inductance/ Q] 6.3 DC Resistance DC Resistance shall meet item 3. Measuring Equipment: Digital multi meter 6.4 Self Resonant S.R.F shall meet item 3. Measuring Equipment: Frequency (S.R.F) KEYSIGHT 8753C or equivalent 6.5 Rated Current Self temperature rise shall be The rated current is applied. limited to 25°C max. 7. Mechanical Performance No. Item Specification Test Method 7.1 Shear Test Chip coil shall not be damaged Substrate: Glass-epoxy substrate after tested as test method. Land 0.5 (in mm) 0.55 0.4 0.55 Force: 5N Hold Duration: 5s±1s Applied Direction: Parallel to PCB ChipCoil F Substrate 7.2 Bending Test Chip coil shall not be damaged Substrate: Glass-epoxy substrate after tested as test method. (100mm×40mm×0.8mm) Speed of Applying Force: 1mm / s Deflection: 2mm Hold Duration: 30s Pressurejig R340 F Deflection 45 45 Product (in mm) MURATA MFG.CO., LTD

Reference Only Spec No. JELF243B-0010S-01 P.5/11 No. Item Specification Test Method 7.3 Vibration Appearance: No damage Oscillation Frequency: Inductance Change: within ±10% 10Hz to 55Hz to 10Hz for 1 min Total Amplitude: 1.5mm Testing Time: A period of 2 hours in each of 3 mutually perpendicular directions. 7.4 Solderability The wetting area of the electrode Flux: Ethanol solution of rosin 25(wt)% shall be at least 90% covered with (Immersed for 5s to 10s) new solder coating. Solder: Sn-3.0Ag-0.5Cu Pre-Heating: 150°C±10°C / 60s to 90s Solder Temperature: 240°C±5°C Immersion Time: 3s±1s 7.5 Resistance to Appearance: No damage Flux: Ethanol solution of rosin 25(wt)% Soldering Heat Inductance Chang (Immersed for 5s to 10s) e: within ±10% Solder: Sn-3.0Ag-0.5Cu Pre-Heating: 150°C±10°C / 1 min to 2 min Solder Temperature: 270°C±5°C Immersion Time: 10s±1s Then measured after exposure in the room condition for 24h±2h. 8. Environmental Performance It shall be soldered on the substrate. No. Item Specification Test Method 8.1 Humidity Appearance: No damage Temperature: 40°C±2°C Inductance Change: within ±10% Humidity: 90%(RH) to 95%(RH) Time: 1000h (+48h,-0h) Then measured after exposure in the room condition for 24h±2h. 8.2 Heat Life Temperature: 125°C±2°C Current: Rated Current (See the 3.) Time: 1000h (+48h, -0h) Then measured after exposure in the room condition for 24h±2h. 8.3 Humidity Load Temperature: 40°C±2°C Humidity: 90%(RH) to 95%(RH) Current: Rated Current (See the 3.) Time: 1000h (+48h, -0h) Then measured after exposure in the room condition for 24h±2h. 8.4 Temperature 1 cycle: Cycle 1 step: -55°C (+0°C, -3°C) / 30 min±3 min 2 step: Ordinary temp. / 2 min to 3 min 3 step: +125°C (+3°C, -0°C) / 30 min±3 min 4 step: Ordinary temp. / 2 min to 3 min Total of 10 cycles Then measured after exposure in the room condition for 24h±2h. 9. Specification of Packaging 9.1 Appearance and Dimensions of paper tape (8mm-wide) 1 Polaritymarking 2.0±0.052.0±0.05 4.0±0.1 φ1.5±0.1 5±0. 0 7 1. 5 0 0. 2±0.04 3.5± 8.0±0.2 1 1. 0.62±0.04 Directionoffeed 0.8max. (in mm) MURATA MFG.CO., LTD

Reference Only Spec No. JELF243B-0010S-01 P.6/11 9.2 Specification of Taping (1) Packing quantity (standard quantity) 10,000 pcs. / reel (2) Packing Method Products shall be packed in the cavity of the base tape and sealed by top tape and bottom tape. (3) Sprocket hole The sprocket holes are to the right as the tape is pulled toward the user. (4) Spliced point Base tape and Top tape has no spliced point. (5) Missing components number Missing components number within 0.1 % of the number per reel or 1 pc., whichever is greater, and are not continuous. The Specified quantity per reel is kept. 9.3 Pull Strength Top tape 5N min. Bottom tape 9.4 Peeling off force of cover tape Top tape Speed of Peeling off 300mm / min 165 to 180 degree F Peeling off force 0.1N to 0.6N (minimum value is typical) Bottom tape Base tape 9.5 Dimensions of Leader-tape, Trailer and Reel There shall be leader-tape ( top tape and empty tape) and trailer-tape (empty tape) as follows. 16T0ramileinr. Leader 2.0±0.5 Label 190min. 210min. Emptytape Toptape 13.0±0.2 6 0+-10 Directionoffeed 21.0±0.8 9.0+1 -0 13.0±1.4 180+-30 (in mm) 9.6 Marking for reel Customer part number, MURATA part number, Inspection number (1), RoHS marking (2), Quantity etc ･･･ 1) <Expression of Inspection No.> □□ OOOO  (1) (2) (3) (1) Factory Code (2) Date First digit : Year / Last digit of year Second digit : Month / Jan. to Sep.  1 to 9, Oct. to Dec.  O, N, D Third, Fourth digit : Day (3) Serial No. 2) <Expression of RoHS marking > ROHS – Y (△) (1) (2) (1) RoHS regulation conformity parts. (2) MURATA classification number 9.7 Marking for Outside package (corrugated paper box) Customer name, Purchasing order number, Customer part number, MURATA part number, RoHS marking (2), Quantity, etc ･･･ MURATA MFG.CO., LTD

Reference Only Spec No. JELF243B-0010S-01 P.7/11 9.8. Specification of Outer Case Outer Case Dimensions Standard Reel Quantity (mm) Label in Outer Case (Reel) W D H H 186 186 93 5  D W ・・ ※ A bo ve Outer Case size is typical. It depends on a quantity of an order. 10. ！ Caution Limitation of Applications Please contact us before using our products for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property. (1) Aircraft equipment (6) Transportation equipment (vehicles, trains, ships, etc.) (2) Aerospace equipment (7) Traffic signal equipment (3) Undersea equipment (8) Disaster prevention / crime prevention equipment (4) Power plant control equipment (9) Data-processing equipment (5) Medical equipment (10) Applications of similar complexity and /or reliability requirements to the applications listed in the above 11. Notice Products can only be soldered with reflow. This product is designed for solder mounting. Please consult us in advance for applying other mounting method such as conductive adhesive. Please check the mounting condition before using. Using mounting conditions (nozzles, equipment conditions, etc.) that are not suitable for products may lead to pick up errors, misalignment, or damage to the product. 11.1 Land pattern designing ChipCoil Land SolderResist a 0.4 c b 1.2 c 0.5 a (in mm) b 11.2 Flux, Solder ・Use rosin-based flux. Don’t use highly acidic flux with halide content exceeding 0.2(wt)% (chlorine conversion value). Don’t use water-soluble flux. ・Use Sn-3.0Ag-0.5Cu solder. ・Standard thickness of solder paste : 100μm to 150μm. MURATA MFG.CO., LTD

Reference Only Spec No. JELF243B-0010S-01 P.8/11 11.3 Reflow soldering conditions ・Inductance value may be changed a little due to the amount of solder. So, the chip coil shall be soldered by reflow so that the solder volume can be controlled. ・Pre-heating should be in such a way that the temperature difference between solder and product surface is limited to 150°C max. Cooling into solvent after soldering also should be in such a way that the temperature difference is limited to 100°C max. Insufficient pre-heating may cause cracks on the product, resulting in the deterioration of products quality. ・Standard soldering profile and the limit soldering profile is as follows. The excessive limit soldering conditions may cause leaching of the electrode and/or resulting in the deterioration of product quality. ・Reflow soldering profile T(e℃mp). 260℃ 245℃±3℃ 230℃ 220℃ Limit Profile 180 150 30s～60s Standard Profile 60s max. 90s±30s Time.(s) Standard Profile Limit Profile Pre-heating 150°C～180°C, 90s±30s Heating above 220°C, 30s～60s above 230°C, 60s max. Peak temperature 245°C±3°C 260°C, 10s Cycle of reflow 2 times 2 times 11.4 Reworking with soldering iron The following conditions must be strictly followed when using a soldering iron. Pre-heating 150°C, 1 min Tip temperature 350°C max. Soldering iron output 80W max. Tip diameter φ3mm max. Soldering time 3(+1, -0)s Time 2 times Note : Do not directly touch the products with the tip of the soldering iron in order to prevent the crack on the products due to the thermal shock. 11.5 Solder Volume ・Solder shall be used not to be exceed the upper limits as shown below. ・Accordingly increasing the solder volume, the mechanical stress to Chip is also increased. Exceeding solder volume may cause the failure of mechanical or electrical performance. UpperLimit 1/3T≦t≦T Recommendable T：thickness of product t MURATA MFG.CO., LTD

Reference Only Spec No. JELF243B-0010S-01 P.9/11 11.6 Product’s location The following shall be considered when designing and laying out P.C.B.'s. (1) P.C.B. shall be designed so that products are not subject to the mechanical stress due to warping the board. ［Products direction］ a Products shall be located in the sideways b direction (Length:a＜b) to the mechanical stress. 〈Poorexample〉 〈Goodexample〉 (2) Components location on P.C.B. separation. It is effective to implement the following measures, to reduce stress in separating the board. It is best to implement all of the following three measures; however, implement as many measures as possible to reduce stress. Contents of Measures Stress Level (1) Turn the mounting direction of the component parallel to the board separation surface. A > D *1 (2) Add slits in the board separation part. A > B (3) Keep the mounting position of the component away from the board separation surface. A > C C Perforation B D A Slit *1 A > D is valid when stress is added vertically to the perforation as with Hand Separation. If a Cutting Disc is used, stress will be diagonal to the PCB, therefore A > D is invalid. (3) Mounting Components Near Screw Holes When a component is mounted near a screw hole, it may be affected by the board deflection that occurs during the tightening of the screw. Mount the component in a position as far away from the screw holes as possible. Screw Hole Recommend 11.7 Cleaning Conditions Products shall be cleaned on the following conditions. (1) Cleaning temperature shall be limited to 60°C max. (40°C max for IPA.) (2) Ultrasonic cleaning shall comply with the following conditions with avoiding the resonance phenomenon at the mounted products and P.C.B. Power : 20 W / l max. Frequency : 28kHz to 40kHz Time : 5 min max. (3) Cleaner 1. Alcohol type cleaner Isopropyl alcohol (IPA) 2. Aqueous agent PINE ALPHA ST-100S (4) There shall be no residual flux and residual cleaner after cleaning. In the case of using aqueous agent, products shall be dried completely after rinse with de-ionized water in order to remove the cleaner. (5) Other cleaning Please contact us. MURATA MFG.CO., LTD

Reference Only Spec No. JELF243B-0010S-01 P.10/11 11.8 Resin coating The inductance value may change and/or it may affect on the product's performance due to high cure-stress of resin to be used for coating/molding products. So please pay your careful attention when you select resin. In prior to use, please make the reliability evaluation with the product mounted in your application set. 11.9 Handling of a substrate After mounting products on a substrate, do not apply any stress to the product caused by bending or twisting to the substrate when cropping the substrate, inserting and removing a connector from the substrate or tightening screw to the substrate. Excessive mechanical stress may cause cracking in the product. Bending Twisting 11.10 Storage and Handing Requirements (1) Storage period Use the products within 6 months after delivered. Solderability should be checked if this period is exceeded. (2) Storage conditions ・Products should be stored in the warehouse on the following conditions. Temperature ： -10°C to 40°C Humidity ： 15% to 85% relative humidity No rapid change on temperature and humidity Don't keep products in corrosive gases such as sulfur,chlorine gas or acid, or it may cause oxidization of electrode, resulting in poor solderability. ・Products should be stored on the palette for the prevention of the influence from humidity, dust and so on. ・Products should be stored in the warehouse without heat shock, vibration, direct sunlight and so on. ・Products should be stored under the airtight packaged condition. (3) Handling Condition Care should be taken when transporting or handling product to avoid excessive vibration or mechanical shock. 12．! Note (1) Please make sure that your product has been evaluated in view of your specifications with our product being mounted to your product. (2) You are requested not to use our product deviating from the reference specifications. (3) The contents of this reference specification are subject to change without advance notice. Please approve our product specifications or transact the approval sheet for product specifications before ordering. MURATA MFG.CO., LTD

Reference Only Spec No. JELF243B-0010S-01 P.11/11 <E lectrical Performance:Measuring Method of Inductance/Q> (1) Residual elements and stray elements of test fixture can be described by F-parameter shown in following. I1 I2 A B Zm V1 C D V2 Zx VI 11 = AC BD VI 22 TestHead Testfixture Product (2) The impedance of chip coil Zx and measured value Zm can be described by input/output current/voltage. V1 V2 Zm= I 1 ， Z x = I 2 (3) Thus,the relation between Zx and Zm is following; Zm-β where, α= D / A =1 Zx=  1-ZmΓ β= B / D =Zsm-(1-Yom Zsm)Zss Γ= C / A =Yom Zsm:measured impedance of short chip Zss:residual impedance of short chip (0nH) Yom:measured admittance when opening the fixture (4) Lx and Qx shall be calculated with the following equation. Im(Zx) Im(Zx) Lx :Inductance of chip coil Lx= Qx= 2πf ， Re(Zx) Qx:Q of chip coil f :Measuring frequency MURATA MFG.CO., LTD