POWER LPT40 Series Data Sheet 40 Watts Total Power: 44 - 55 Watts Input Voltage: 85 - 264 Vac 120 - 300 Vdc # of Outputs: Triple Special FeatureS ƒ Universal input ƒ 3” x 5” footprint ƒ Less than 1U high ƒ Remote sense on main output ƒ Built-in EMI filter ƒ Low output ripple ƒ Adjustable main output ƒ Overvoltage protection ƒ Overload protection Electrical Specifications ƒ 110 KHz switching frequency Input ƒ LPX40 enclosure kit available Input range 85 - 264 Vac; 120 - 300 Vdc ƒ RoHS compliant Frequency 47 - 440 Hz Inrush current < 18 A peak @ 115 Vac; SaFety < 36 A peak @ 230 Vac, cold start @ 25 °C ƒ UL U L60950 Input current 1 A max. (RMS) @ 115 Vac E132002 Efficiency 70% typical at full load (60% for LPT41) ƒ cUL 60950 EMI FCC Class B conducted; CISPR 22 Class B conducted Level 3 LR53982C EN55022 Class B conducted; VDE 0878 PT3 Class B conducted ƒ NEMKO EN 60950/EMKO-TUE P95100411 (74-sec) 203 Safety ground leakage current < 0.5 mA @ 50/60 Hz, 264 Vac input ƒ CB Certificate and report Output 1118, 1122, 1123, 1124 Maximum power 40 W for convection (LPT41, 25 W); ƒ CE Mark (LVD) 55 W with 30CFM forced air (LPT41, 41 W) Cross regulation ±2% on output 1; ±5% on outputs 2, 3 Adjustment range -5, +10% minimum Hold-up time 20 ms @ 40 W load, 115 Vac nominal line Overload protection Short circuit protection on all outputs. Case overload protected @ 110% to 145% above peak rating Overvoltage protection 5.7 to 6.7 Vdc on the main outputLPT41: 3.6 to 4.6 Vdc Remote sense Compensates for 0.5 V lead drop min. Will operate without remote sense connected. Reverse connection protected.

LPT40 Series Data Sheet Environmental Specifications Operating temperature 0 °C to 50 °C ambient derate each output at 2.5% per degree from 50 °C to 70 °C, -20 °C start up. Electromagnetic susceptibility Designed to meet IEC 801, -2, -3, -4, -5, -6, Level 3 Humidity Operating; non-condensing 5% to 95% Vibration Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 0.75 G peak 5 Hz to 500 Hz, operational Storage temperature -40 °C to 85 °C Temperature coefficient ±.04% per °C MTBF demonstrated > 550,000 hours at full load and 25 °C ambient conditions Ordering Information Maximum Load Maximum Load Model Output Minimum Ripple with Convection with 30CFM Peak Load1 Regulation2 Number Voltage Load P/P(PARD)3 Cooling Forced Air +3.3 V 0.5 A 4 A 7 A 7 A ±2% 50 mV LPT41 +5 V 0 A 1.5 A 2.0 A 2.5 A ±2% 50 mV +12 V 0 A 0.5 A 0.7 A 0.7 A ±5% 120 mV +5 V 0.4 A 4 A 5 A 7 A ±2% 50 mV LPT42 +12 V 0.2 A 2 A 2.5 A 4 A ±5% 120 mV -12 V 0 A 0.5 A 0.7 A 1 A ±5% 120 mV +5 V 0.5 A 6 A 8 A 9 A ±2% 50 mV LPT43 +12 V 0 A 0.5 A 0.7 A 1 A ±5% 120 mV -12 V 0 A 0.5 A 0.7 A 1 A ±5% 120 mV +5 V 0.4 A 4 A 5 A 7 A ±2% 50 mV LPT44 +12 V 0.2 A 2 A 2.5 A 4 A ±5% 120 mV -5 V 0 A 0.5 A 0.7 A 1 A ±5% 50 mV +5 V 0.4 A 4 A 5 A 7 A ±2% 50 mV LPT45 +15 V 0.2 A 2 A 2.5 A 3 A ±5% 150 mV -15 V 0 A 0.5 A 0.7 A 1 A ±5% 150 mV +5 V 0.4 A 4 A 5 A 6 A ±2% 50 mV LPT46 +24 V 0.1 A 1.0 A 1.5 A 2 A ±7% 240 mV +12 V 0 A 0.5 A 0.7 A 1 A ±5% 120 mV +5 V 0.4 A 4 A 5 A 6 A ±2% 50 mV LPT47 +24 V 0.2 A 1.0 A 1.5 A 2 A ±7% 240 mV -12 V 0 A 0.5 A 0.7 A 1 A ±5% 120 mV 1. Peak current lasting < 30 seconds with a maximum 10% duty cycle. Power Derating Curve 2. At 25 °C including initial tolerance, line voltage, load currents and output 55W voltages adjusted to factory settings. 30 CFM Forced Air Cooling 3. Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a 0.1 µF 40W capacitor at rated line voltage and load ranges. 4. Minimum Loads are required. 30W 5. This product is a Component Power Supply and is only for inclusion by Output Natural 27.5W Power professional installers within other equipment and must not be operated as (Watts) 20W CoCnovoelcintigon 20W a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for 10W sale to End Users. 0W 0°C 10°C 20°C 30°C 40°C 50°C 60°C 70°C TA – Ambient Temperature-°C

LPT40 Series Data Sheet Mechanical Drawing 5.00" (127) 0.22" 4.55" (5.6) (115.6) GND Remote Sense M1 M2 Connector SK201 _ + Voltage Adj. Pot 3.00" (76.2) SK 2 1 2 2.55" 3 (64.8) 4 SK 1 5 3 N 6 1 L 0.15" (4) DIA (4 places) 1.14" (29) 0.197" (5)

LPT40 Series Data Sheet Pin Assignments Connector LPT41 LPT42 LPT43 LPT44 LPT45 LPT46 LPT47 SK1-1 Line Line Line Line Line Line Line SK1-3 Neutral Neutral Neutral Neutral Neutral Neutral Neutral SK2-1 5V +12V +12V +12V +15V +24V +24V SK2-2 3.3V +5V +5V +5V +5V +5V +5V SK2-3 3.3V +5V +5V +5V +5V +5V +5V SK2-4 Common Common Common Common Common Common Common SK2-5 Common Common Common Common Common Common Common SK2-6 12V -12V -12V -5V -15V +12V -12V SK201-1 +Sense +Sense +Sense +Sense +Sense +Sense +Sense SK201-2 -Sense -Sense -Sense -Sense -Sense -Sense -Sense Mating Connectors AC Input Molex 09-50-8031 (USA) 09-93-0300 (UK) PINS: 08-52-0113 DC Outputs Molex 09-50-8061 (USA) 09-93-0600 (UK) PINS: 08-52-0113 Remote Sense Molex 22-01-2025 PINS: 08-52-0123 Artesyn Embedded Power Connector Kit #70-841-006, includes all of the above 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ±0.02”¬¬ (±0.5 mm) 3. Mounting holes M1 and M2 should be grounded for EMI purposes. 4. Mounting hole M1 is safety ground connection. 5. Specifications are for convection rating at factory settings at 115 VAC input, 25 °C unless otherwise stated. 6. Warranty: 2 year 7. Weight: 0.5 lbs/0.23 kg WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 South Diablo Way Ground Floor Offices, Barberry House 14/F, Lu Plaza Suite B100 4 Harbour Buildings, Waterfront West 2 Wing Yip Street Tempe, AZ 85282, USA Brierley Hill, West Midlands Kwun Tong, Kowloon +1 888 412 7832 DY5 1LN, UK Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 Artesyn Embedded Technologies, Artesyn Embedded Power, Artesyn, and all Artesyn related logos are For more information: www.artesyn.com trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are For support: productsupport.ep@artesyn.com trade names, trademarks, or registered trademarks of their respective owners. Specifications are subject to change without notice. © 2019 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. LPT40 Series-DS 12Dec2019

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: A rtesyn Embedded Technologies: LPT47-T LPT44 LPT43 LPT47 LPT41 LPT46 LPT42 LPT45