LMV82x, LMV82xA Low power, high accuracy, general-purpose operational amplifier Datasheet — production data Features • Low power consumption: 400µA max at 5V • Low power shutdown mode: 50nA max SC70-5 SOT23-5 / SOT23-6 • Low offset voltage: 0.8 mV max at 25°C • Tiny packages • Extended temperature range: -40°C to +125°C DFN8 2x2 MiniSO8 / MiniSO10 • Low supply voltage: 2.5 V - 5.5V • Gain bandwidth product: 5.5MHz • Automotive qualification Benefits • Longer lifetime in battery-powered applications TSSOP14 TSSOP16 • Higher accuracy without calibration • Smaller form factor than equivalent competitor devices • Application performances guaranteed over wide temperature range SO8 SO14 Related products product (5.5 MHz). The LMV821, LMV822 and • See TSV85x series for lower power LMV824 are offered with standard pinouts. consumption (180µA max at 5V) The LMV820, LMV823, and LMV825 include a power-saving shutdown feature that reduces the Applications supply current to a maximum of 50 nA at 25 °C. • Battery-powered applications The wide temperature range, high ESD tolerance, and automotive grade qualification make them • Portable devices particularly suitable for use in harsh automotive • Automotive signal conditioning applications. • Active filtering Table 1. Device summary • Medical instrumentation Without shutdown With shutdown Description Standard Enhanced Standard Enhanced Vio Vio Vio Vio The LMV82x and LMV82xA series of single, dual, and quad operational amplifiers offer low voltage Single LMV821 LMV821A LMV820 LMV820A operation with rail-to-rail output swing. They Dual LMV822 LMV822A LMV823 LMV823A outperform the industry standard LMV321, especially with regard to the gain bandwidth Quad LMV824 LMV824A LMV825 LMV825A April 2017 DocID022467 Rev 4 1/32 This is information on a product in full production. www.st.com

Contents LMV82x, LMV82xA Contents 1 Package pin connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Absolute maximum ratings and operating conditions . . . . . . . . . . . . . 4 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 Application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.1 Operating voltages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.2 Input common mode range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.3 Rail-to-rail output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.4 Input offset voltage drift over temperature . . . . . . . . . . . . . . . . . . . . . . . . 16 4.5 PCB layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.6 Macromodel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.7 Shutdown function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 5 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 5.1 SC70-5 (or SOT323-5) package information . . . . . . . . . . . . . . . . . . . . . . 19 5.2 SOT23-5 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 5.3 SOT23-6 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 5.4 DFN8 2 x 2 mm package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5.5 MiniSO-8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 5.6 MiniSO-10 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 5.7 TSSOP14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 5.8 TSSOP16 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 5.9 SO-8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 5.10 SO-14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 6 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 7 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 2/32 DocID022467 Rev 4

LMV82x, LMV82xA Package pin connections 1 Package pin connections Figure 1. Pin connections for each package (top view) (cid:44)(cid:49)(cid:14) (cid:20) (cid:25) (cid:57)(cid:38)(cid:38)(cid:14) (cid:57)(cid:38)(cid:38)(cid:16) (cid:21) (cid:24) (cid:54)(cid:43)(cid:39)(cid:49) (cid:44)(cid:49)(cid:16) (cid:22) (cid:23) (cid:50)(cid:56)(cid:55) SC70-5 / SOT23-5 SOT23-6 (cid:50)(cid:56)(cid:55)(cid:20) (cid:20) (cid:27) (cid:57)(cid:38)(cid:38)(cid:14) (cid:50)(cid:56)(cid:55)(cid:20) (cid:57)(cid:38)(cid:38)(cid:14) (cid:44)(cid:49)(cid:20)(cid:16) (cid:21) (cid:26) (cid:50)(cid:56)(cid:55)(cid:21) (cid:44)(cid:49)(cid:20)(cid:16) (cid:50)(cid:56)(cid:55)(cid:21) (cid:49)(cid:38) (cid:44)(cid:49)(cid:20)(cid:14) (cid:22) (cid:25) (cid:44)(cid:49)(cid:21)(cid:16) (cid:44)(cid:49)(cid:20)(cid:14) (cid:44)(cid:49)(cid:21)(cid:16) (cid:57)(cid:38)(cid:38)(cid:16) (cid:23) (cid:24) (cid:44)(cid:49)(cid:21)(cid:14) (cid:57)(cid:38)(cid:38)(cid:16) (cid:44)(cid:49)(cid:21)(cid:14) DFN8 2x2(1) MiniSO8 (cid:50)(cid:56)(cid:55)(cid:20) (cid:20) (cid:20)(cid:19) (cid:57)(cid:38)(cid:38)(cid:14) (cid:44)(cid:49)(cid:20)(cid:16) (cid:21) (cid:28) (cid:50)(cid:56)(cid:55)(cid:21) (cid:44)(cid:49)(cid:20)(cid:14) (cid:22) (cid:27) (cid:44)(cid:49)(cid:21)(cid:16) (cid:57)(cid:38)(cid:38)(cid:16) (cid:23) (cid:26) (cid:44)(cid:49)(cid:21)(cid:14) (cid:54)(cid:43)(cid:39)(cid:49)(cid:20) (cid:24) (cid:25) (cid:54)(cid:43)(cid:39)(cid:49)(cid:21) MiniSO10 (cid:50)(cid:56)(cid:55)(cid:20) (cid:20) (cid:20)(cid:25) (cid:50)(cid:56)(cid:55)(cid:23) (cid:44)(cid:49)(cid:20)(cid:16) (cid:21) (cid:20)(cid:24) (cid:44)(cid:49)(cid:23)(cid:16) (cid:44)(cid:49)(cid:20)(cid:14) (cid:22) (cid:20)(cid:23) (cid:44)(cid:49)(cid:23)(cid:14) (cid:57)(cid:38)(cid:38)(cid:14) (cid:23) (cid:20)(cid:22) (cid:57)(cid:38)(cid:38)(cid:16) (cid:44)(cid:49)(cid:21)(cid:14) (cid:24) (cid:20)(cid:21) (cid:44)(cid:49)(cid:22)(cid:14) (cid:44)(cid:49)(cid:21)(cid:16) (cid:25) (cid:20)(cid:20) (cid:44)(cid:49)(cid:22)(cid:16) (cid:50)(cid:56)(cid:55)(cid:21) (cid:26) (cid:20)(cid:19) (cid:50)(cid:56)(cid:55)(cid:22) (cid:54)(cid:43)(cid:39)(cid:49)(cid:20)(cid:18)(cid:21) (cid:27) (cid:28) (cid:54)(cid:43)(cid:39)(cid:49)(cid:22)(cid:18)(cid:23) TSSOP14 / SO14 TSSOP16 1. The exposed pad of DFN8 2x2 can be connected to VCC- or left floating. DocID022467 Rev 4 3/32 32

Absolute maximum ratings and operating conditions LMV82x, LMV82xA 2 Absolute maximum ratings and operating conditions Table 2. Absolute maximum ratings (AMR) Symbol Parameter Value Unit V Supply voltage(1) 6 cc V Differential input voltage(2) ±V V id cc V Input pins (IN+ and IN- pins) voltage(3) V - 0.3 to V + 0.3 in cc- cc+ I Input current(4) 10 mA in SHDN Shutdown voltage(5) V - 0.2 to V + 0.2 V cc- cc+ T Storage temperature -65 to +150 °C stg Thermal resistance junction to ambient(6)(7) – SC70-5 205 – SOT23-5 250 – DFN8 2x2 57 – MiniSO8 190 R – SO8 125 °C/W thja – TSSOP14 100 – SO14 105 – SOT23-6 240 – MiniSO10 113 – TSSOP16 95 T Maximum junction temperature 150 °C j HBM: human body model (except shutdown pin)(8) 4 kV HBM: human body model (shutdown pin)(8) 3.5 ESD MM: machine model(9) 250 V CDM: charged device model(10) 1.3 kV CDM: charged device model LMV825(10) 1 Latch-up immunity 200 mA 1. All voltage values, except the differential voltage are with respect to the network ground terminal. 2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. 3. Vcc-Vin must not exceed 6V, Vin must not exceed 6V. 4. The input current must be limited by a resistor in series with the inputs. 5. Vcc-Vshdn must not exceed 6V, Vin must not exceed 6V. 6. Short-circuits can cause excessive heating and destructive dissipation. 7. R are typical values. th 8. Human body model: a 100pF capacitor is discharged through a 1.5kΩ resistor between two pins of the device. This is done for all couples of pin combinations while other pins are floating. 9. Machine model: a 200pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5Ω). This is done for all couples of pin combinations while other pins are floating. 10. Charged device model: all pins and package are charged together to the specified voltage and then discharged directly to ground. 4/32 DocID022467 Rev 4

LMV82x, LMV82xA Absolute maximum ratings and operating conditions Table 3. Operating conditions Symbol Parameter Value Unit V Supply voltage 2.5 to 5.5 cc V V Common mode input voltage range V - 0.2 to V - 1 icm cc- cc+ T Operating free air temperature range -40 to +125 °C oper DocID022467 Rev 4 5/32 32

Electrical characteristics LMV82x, LMV82xA 3 Electrical characteristics Table 4. Elec t rical characteristics at V = 2.5 V with V = 0V, V = V /2, T = 25°C, and R cc+ cc- icm cc amb L connected to V /2 (unless otherwise specified) cc Symbol Parameter Conditions Min. Typ. Max. Unit DC performance LMV82xA 0.8 LMV82x 3.5 V Input offset voltage io LMV82xA, -40 °C < T< 125 °C 2 LMV82x, -40 °C < T< 125 °C 4 R =600Ω 220 L R =600Ω, -40 °C < T< 125 °C 320 L V -V High level output voltage mV CC OH R =2kΩ 120 L R =2kΩ, -40 °C < T< 125 °C 220 L R =600Ω 220 L R =600Ω, -40 °C < T< 125 °C 320 L V Low level output voltage OL R =2kΩ 120 L R =2kΩ, -40 °C < T< 125 °C 200 L I (V = V ) 5 sink out cc Vid = -1 V -40 °C < T< 125 °C 5 I mA out I (V = 0V) 5 source out Vid = 1 V -40 °C < T< 125 °C 5 6/32 DocID022467 Rev 4

LMV82x, LMV82xA Electrical characteristics Table 5. Shutdown characteristics V =2.5V CC Symbol Parameter Conditions Min. Typ. Max. Unit DC performance T = 25 °C 2.5 50 Supply current in shutdown nA I mode (all operators) -40°C < T< 85 °C 200 CC SHDN = V CC- -40°C < T< 125 °C 1.5 µA R =2kΩ, t Amplifier turn-on time(1) L 300 on V =V to V +0.2V out CC- CC- ns R =2kΩ, Vout=V -1V to t Amplifier turn-off time(1) L CC+ 20 off V -1.2V CC+ V SHDN logic high V -0.5 IH cc V V SHDN logic low 0.5 IL I SHDN current high SHDN=V 10 IH CC+ I SHDN current low SHDN=V 10 pA IL CC- Output leakage in shutdown SHDN=VCC- 50 I OLeak mode -40°C < T< 125°C 1 nA 1. See Section4.7: Shutdown function on page17. DocID022467 Rev 4 7/32 32

Electrical characteristics LMV82x, LMV82xA Table 6. Elec t rical characteristics at V = 2.7 V with V = 0V, V = V /2, T =25°C, and R cc+ cc- icm cc amb L connected to V /2 (unless otherwise specified) cc Symbol Parameter Conditions Min. Typ. Max. Unit DC performance LMV82xA 0.8 LMV82x 3.5 V Input offset voltage mV io LMV82xA, -40 °C < T< 125 °C 2 LMV82x, -40 °C < T< 125 °C 4 ΔV /ΔT Input offset voltage drift(1) -40 °C < T< 125 °C 1 μV/°C io Input offset current 0.5 30 I io (Vout=Vcc/2) -40 °C < T< 125 °C 1 50 nA 60 120 I Input bias current (V =V /2) ib out cc -40 °C < T< 125 °C 180 Common mode rejection ratio 70 75 CMR 20 log (ΔV /ΔV ) icm io Vic = 0 V to Vcc-1V, Vout = Vcc/2 -40 °C < T< 125 °C 68 R =600Ω 90 100 L dB Large signal voltage gain RL=600Ω, -40 °C < T< 125 °C 85 A vd Vout= 0.5V to (Vcc-0.5V) RL=2kΩ 95 100 R =2kΩ, -40 °C < T< 125 °C 90 L R =600Ω 200 L R =600Ω, -40 °C < T< 125 °C 300 L V -V High level output voltage CC OH R =2kΩ 100 L R =2kΩ, -40 °C < T< 125 °C 200 L mV R =600Ω 200 L R =600Ω, -40 °C < T< 125 °C 300 L V Low level output voltage OL R =2kΩ 120 L R =2kΩ, -40 °C < T< 125 °C 200 L I V = V 15 26 sink ( out cc) Vid = -1 V -40 °C < T< 125 °C 12 I mA out I (V = 0V) 15 21 source out Vid = 1 V -40 °C < T< 125 °C 12 Supply current (per channel) 220 300 I µA CC No load, Vout = Vcc/2 -40 °C < T< 125 °C 500 8/32 DocID022467 Rev 4

LMV82x, LMV82xA Electrical characteristics Table 6. Electrical characteristics at V = 2.7 V with V = 0V, V = V /2, T =25°C, and R cc+ cc- icm cc amb L connected to V /2 (unless otherwise specified) (continued) cc Symbol Parameter Conditions Min. Typ. Max. Unit AC performance GBP Gain bandwidth product 5.5 MHz F Unity gain frequency 4.5 u R >1MΩ, C =22pF Φ Phase margin L L 60 degrees m G Gain margin 10 dB m R >1MΩ, C =22pF, SR Slew rate L L 1.2 1.7 V/μs V =0.5V to V -0.5V out CC f=1kHz 18 en Equivalent input noise voltage f=10kHz 15 ---n--H-V----z-- pA i Equivalent input noise current f=1kHz 0.30 ------------ n Hz f = 1 kHz, A = 1, R = 100 kΩ Total harmonic distortion + in CL L THD+N Vicm = Vcc/2, BW = 22 kHz, 0.001 % noise Vout = 3 Vpp Table 7. Shutdown characteristics V =2.7V CC Symbol Parameter Conditions Min. Typ. Max. Unit DC performance SHDN = V 2.5 50 CC- Supply current in shutdown nA I -40°C < T< 85°C 200 CC mode (all operators) -40°C < T< 125°C 1.5 µA R =2kΩ, t Amplifier turn-on time(1) L 300 on V =V to V +0.2V out CC- CC- ns R =2kΩ, Vout=V -1V to t Amplifier turn-off time(1) L CC+ 20 off V -1.2V CC+ V - V SHDN logic high cc IH 0.5 V V SHDN logic low 0.5 IL I SHDN current high SHDN=V 10 IH CC+ I SHDN current low SHDN=V 10 pA IL CC- Output leakage in shutdown SHDN=VCC- 50 I OLeak mode -40°C < T< 125°C 1 nA 1. See Section4.7: Shutdown function on page17. DocID022467 Rev 4 9/32 32

Electrical characteristics LMV82x, LMV82xA Table 8. Ele c trical characteristics at V = 5 V with V = 0V, V = V /2, T = 25°C, and R cc+ cc- icm cc amb L connected to V /2 (unless otherwise specified) cc Symbol Parameter Conditions Min. Typ. Max. Unit DC performance LMV82xA 0.8 LMV82x 3.5 V Input offset voltage mV io LMV82xA, -40 °C < T< 125 °C 2 LMV82x, -40 °C < T< 125 °C 4 ΔV /ΔT Input offset voltage drift(1) -40 °C < T< 125 °C 1 μV/°C io 0.5 30 I Input offset current (V =V /2) io out cc -40 °C < T< 125 °C 1 50 nA 60 120 I Input bias current (V =V /2) ib out cc -40 °C < T< 125 °C 180 Common mode rejection ratio 20 72 90 CMR log (ΔV /ΔV ) icm io Vic = 0 V to Vcc-1V, Vout = Vcc/ -40 °C < T< 125 °C 70 V = 2.5 to 5V cc Supply voltage rejection ratio 20 SVR 70 75 log (ΔV /ΔV ) cc io -40 °C < T< 125 °C 65 dB R =600Ω 95 100 L Large signal voltage gain RL=600Ω, -40 °C < T< 125 °C 90 A vd Vout= 0.5V to (Vcc-0.5V) RL=2kΩ 95 100 R =2kΩ, -40 °C < T< 125 °C 90 L R =600Ω 250 L R =600Ω, -40 °C < T< 125 °C 400 L V -V High level output voltage CC OH R =2kΩ 150 L R =2kΩ, -40 °C < T< 125 °C 200 L mV R =600Ω 250 L R =600Ω, -40 °C < T< 125 °C 300 L V Low level output voltage OL R =2kΩ 150 L R =2kΩ, -40 °C < T< 125 °C 200 L I V = V 35 43 sink ( out cc) Vid = -1 V -40 °C < T< 125 °C 25 I mA out I (V = 0V) 60 70 source out Vid = 1 V -40 °C < T< 125 °C 50 Supply current (per channel) 300 400 I µA CC No load, Vout = Vcc/2 -40°C < T< 125°C 600 10/32 DocID022467 Rev 4

LMV82x, LMV82xA Electrical characteristics Table 8. Electrical characteristics at V = 5 V with V = 0V, V = V /2, T = 25°C, and R cc+ cc- icm cc amb L connected to V /2 (unless otherwise specified) (continued) cc Symbol Parameter Conditions Min. Typ. Max. Unit AC performance GBP Gain bandwidth product 5.5 MHz F Unity gain frequency 4.5 u Φ Phase margin RL>1MΩ, CL=22pF 60 degree m s G Gain margin 10 dB m R >1MΩ, C =22pF, SR Slew rate L L 1.4 1.9 V/μs V =0.5V to V -0.5V out CC f=1kHz 16 en Equivalent input noise voltage f=10kHz 13 ---n--H-V---z--- pA i Equivalent input noise current f=1kHz 0.30 ------------ n Hz f = 1 kHz, A = 1, in CL R = 100 kΩ, THD+N Total harmonic distortion + noise L 0.001 % Vicm = Vcc/2, BW = 22 kHz, Vout = 3 Vpp 1. See Section4.4: Input offset voltage drift over temperature. Table 9. Shutdown characteristics V =5V CC Symbol Parameter Conditions Min. Typ. Max. Unit DC performance T= 25°C 2.5 50 Supply current in shutdown nA I mode (all operators) -40°C < T< 85°C 200 CC SHDN = V CC- -40°C < T< 125°C 1.5 µA R =2kΩ, t Amplifier turn-on time(1) L 300 on V =V to V +0.2V out CC- CC- ns R =2kΩ, Vout=V -1V to t Amplifier turn-off time(1) L CC+ 20 off V -1.2V CC+ V - V SHDN logic high cc IH 0.5 V V SHDN logic low 0.5 IL I SHDN current high SHDN=V 10 IH CC+ I SHDN current low SHDN=V 10 pA IL CC- Output leakage in shutdown SHDN=VCC- 50 I OLeak mode -40°C < T< 125°C 1 nA 1. See Section4.7: Shutdown function on page17. DocID022467 Rev 4 11/32 32

Electrical characteristics LMV82x, LMV82xA Figure 2. Supply current vs. supply voltage at Figure 3. Supply current vs. Vicm at Vicm= V /2 V = 5 V CC CC 1.2 0.35 0.30 1.0 T=25°C mA) 0.25 mA) 0.8 urrent ( 0.20 T=25°C urrent ( 0.6 T=125°C Supply C 00..1105 T=-40°C T=125°C Supply C 0.4 T=-40°C 0.05 Vicm=2.5V 0.2 Vcc=5V Follower configuration 0.00 0.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Supply Voltage (V) Input Common Mode Voltage (V) Figure 4. Vio distribution at V = 5 V Figure 5. Input offset voltage vs. input common CC mode voltage at V = 5 V CC 30 0.30 Vcc=5V Vicm=2.5V 25 T=25°C 0.25 T=25°C T=-40°C V) m 20 e ( 0.20 %) ag n ( olt o 15 V 0.15 opulati 10 Offset 0.10 P ut np T=125°C 5 I 0.05 Vcc=5V 0 0.00 -3.5 -3.0 -2.5 -2.0 -1.5 -1.0 -0.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Input offset voltage (mV) Input Common Mode Voltage (V) Figure 6. Output current vs. output voltage at Figure 7. Output current vs. output voltage at V = 2.7 V V = 5 V CC CC 30 75 Sink Sink Vid=-1V Vid=-1V T=25°C T=-40°C 2200 5500 Output Current (mA) -110000 T=125°CT=125T°=C25°CTV=c2Tc5==°-2C4.07°VC T=-40°C Output Current (mA) -225005 T=125°C T=1T2=52°5C°C T=-40°C Vcc=5V --5500 --2200 Source Source Vid=1V -75 Vid=1V -30 00..00 0.5 11..00 1.5 22..00 2.5 33..00 3.5 44..00 4.5 55..00 00..00 0.5 11..00 1.5 22..00 2.5 Output Voltage (V) Output Voltage (V) 12/32 DocID022467 Rev 4

LMV82x, LMV82xA Electrical characteristics Figure 8. Output current vs. supply voltage at Figure 9. Voltage gain and phase with Vicm = V /2 C = 40 pF CC L 9900 40 0 Sink T=-40°C Gain 6600 Vid=-1V T=25°C 30 T=25°C -45 T=125°C A) 3300 20 -90 m Current ( 00 Vicm=Vcc/2 ain (dB) 10 T=-40°C Phase -135hase (°) put --3300 G 0 Vcc=5V -180 P Out T=125°C Vicm=2.5V Rl=10kΩ --6600 T=25°C -10 Cl=40pF T=125°C -225 Source Gain=-100 --9900 Vid=1V T=-40°C -20 -270 10k 100k 1M 10M 22..00 2.5 33..00 3.5 44..00 4.5 55..00 5.5 Supply Voltage (V) Frequency (Hz) Figure 10. Voltage gain and phase with Figure 11. Voltage gain and phase with C = 100 pF C = 200 pF L L 40 0 40 0 Gain Gain 30 T=25°C -45 30 T=25°C -45 20 -90 20 -90 Gain (dB) 10 T=-40°C Phase -135Phase (°) Gain (dB) 10 T=-40°C Phase -135Phase (°) 0 Vcc=5V -180 0 Vcc=5V -180 Vicm=2.5V Vicm=2.5V Rl=10kΩ Rl=10kΩ -10 Cl=100pF -225 -10 Cl=200pF -225 Gain=-100 T=125°C Gain=-100 T=125°C -20 -270 -20 -270 10k 100k 1M 10M 10k 100k 1M 10M Frequency (Hz) Frequency (Hz) Figure 12. Phase margin vs. output current at Figure 13. Stability in follower configuration V = 5 V CC 80 15 Vcc=5V 70 Sink Source 1100 Vicm=2.5V Cl=200pF Rl=10kΩ 60 T=25°C Cl=100pF n (°) 50 5 argi 40 Cl=40pF dB) 00 Phase M 2300 VVciccm==5V2.5V Cl=100pF Gain ( -5 Cl=50pF Vload=2.5V 10 Rl=10KΩ --1100 T=25°C Cl=20pF 0-1.0 -0.8 -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 0.8 1.0 -15 100k 1M 10M Output Current (mA) Frequency (Hz) DocID022467 Rev 4 13/32 32

Electrical characteristics LMV82x, LMV82xA Figure 14. Positive and negative slew rate vs. Figure 15. Positive slew rate at V = 5 V with CC supply voltage C = 100 pF L 22..55 22..00 22..00 1.5 11..55 11..00 11..00 ate (V/µs) 0000....0055 T=125°C T=25°C TCRV=illc-==4m1100M=°0CVΩpcFc/2 Voltage (V) 000...005 T=T2=51°C25°C w r --00..55 Vload=Vcc/2 ut -0.5 Sle --11..00 T=125°C T=25°C T=-40°C Outp T=-40°C --11..00 --11..55 Vcc=5V Vicm=Vcc/2 --22..00 -1.5 Cl=100pF --22..55 --22..00 Rl=1MΩ 33..00 3.5 44..00 4.5 55..00 5.5 0 1 2 3 4 Supply Voltage (V) Time (µs) Figure 16. Negative slew rate at V = 5 V with Figure 17. Noise vs. frequency at V = 5 V CC CC C = 100 pF L 22..00 Hz) 100 V Vcc=5V V/ Vcc=5V 1111....0055 T=125°C VCRillc==m110M=0VΩpcFc/2 ensity (n 8800 Vicm=0.5V T=25°C Voltage (V) 0000....0055 T=25°C e voltage d 60 Vicm=2.5V Output ----1100....0055 T=-40°C put nois 4400 n --11..55 ent i 20 al v --22..00 qui 00 0.0 0.5 1.0 1.5 E 100 1000 10000 Time (µs) Frequency (Hz) Figure 18. 0.1 Hz to 10 Hz noise at V = 5 V Figure 19. Distortion + noise vs. frequency CC 6 10-2 Vcc=5V Vcc=5V 4 Vicm=2.5V Vicm=(Vcc-1)/2 T=25°C Vin=3Vpp Gain=1 V) 2 BW=80kHz µ T=25°C e ( %) Rl=10kΩ ois 0 N ( 10-3 age n HD + olt -2 T V -4 Rl=100kΩ -6 10-4 0 2 4 6 8 10 100 1000 10000 Time (s) Frequency (Hz) 14/32 DocID022467 Rev 4

LMV82x, LMV82xA Electrical characteristics Figure 20. Distortion + noise vs. output voltage 100 10-1 Rl=100kΩ %) Rl=10kΩ N ( 10-2 + D H T Vcc=5V 10-3 Gain=1 BW=22kHz Vicm=Vcc/2 T=25°C 10-4 0.01 0.1 1 10 Output Voltage (Vpp) DocID022467 Rev 4 15/32 32

Application information LMV82x, LMV82xA 4 Application information 4.1 Operating voltages The LMV82x and LMV82xA can operate from 2.5 to 5.5 V. The devices’ parameters are fully specified for 2.5, 2.7, and 5 V power supplies. Additionally, the main specifications are guaranteed at extended temperature ranges from -40°C to +125°C. 4.2 Input common mode range The LMV82x and LMV82xA devices have an input common mode range that includes ground. The input common mode range is extended from Vcc- - 0.2 V to Vcc+ - 1 V, with no output phase reversal. 4.3 Rail-to-rail output The operational amplifiers’ output levels can go close to the rails: 150mV maximum above and below the rail when connected to a 2kΩ resistive load to V /2. cc 4.4 Input offset voltage drift over temperature The maximum input voltage drift over temperature variation is defined in Equation 1. Equation 1 ΔVio Vio(T)–Vio(25°C) ---Δ----T------ = max ---------------T-----–-----2---5----°---C----------------- for Tmin < T < Tmax. 4.5 PCB layouts For correct operation, it is advised to add 10nF decoupling capacitors as close as possible to the power supply pins. 4.6 Macromodel Accurate macromodels of the LMV82x and LMV82xA are available on STMicroelectronics’ web site at www.st.com. These models are a trade-off between accuracy and complexity (that is, time simulation) of the LMV82x and LMV82xA operational amplifiers. They emulate the nominal performances of a typical device within the specified operating conditions mentioned in the datasheet. They also help to validate a design approach and to select the right operational amplifier, but they do not replace on-board measurements. 16/32 DocID022467 Rev 4

LMV82x, LMV82xA Application information 4.7 Shutdown function The operational amplifier is enabled when the SHDN pin is pulled high. To disable the amplifier, the SHDN pin must be pulled down to V . When in shutdown mode, the CC- amplifier output is in a high impedance state. The SHDN pin must never be left floating but tied to V or V . CC+ CC- The turn-on and turn-off times are calculated for an output variation of ±200 mV. Figure21 and Figure22 show the test configurations. Figure23 and Figure24 show the respective results with these test configurations. Figure 21. Test configuration for turn-on time Figure 22. Test configuration for turn-off time (Vout pulled down) (Vout pulled down) GND GND Vcc Vcc Ω Ω k k 2 2 Vcc –1V + Vcc –1V + - - GND GND Figure 23. Turn-on time, V = 5 V, Figure 24. Turn-off time, V = 5 V, CC CC Vout pulled down, T = 25 °C Vout pulled down, T = 25 °C 3 Shutdown pulse 3 Vcc = 5V T = 25°C 2 V) 2 RL connected to GND e ( V) 1 Vout ag 1 oltage ( 0 put volt 0 Vout V ut O -1 -1 Vcc = 5V T = 25°C -2 Shutdown pulse -2 R connected to GND L -3 -3 -0.1 0.0 0.1 0.2 0.3 0.4 0.5 -0.05 0.00 0.05 0.10 0.15 0.20 Time(µs) Time(µs) DocID022467 Rev 4 17/32 32

Package information LMV82x, LMV82xA 5 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 18/32 DocID022467 Rev 4

LMV82x, LMV82xA Package information 5.1 SC70-5 (or SOT323-5) package information Figure 25. SC70-5 (or SOT323-5) package mechanical drawing SIDE VIEW DIMENSIONS IN MM GAUGE PLANE COPLANAR LEADS SEATING PLANE TOP VIEW Table 10. SC70-5 (or SOT323-5) package mechanical data Dimensions Ref Millimeters Inches Min Typ Max Min Typ Max A 0.80 1.10 0.032 0.043 A1 0.10 0.004 A2 0.80 0.90 1.00 0.032 0.035 0.039 b 0.15 0.30 0.006 0.012 c 0.10 0.22 0.004 0.009 D 1.80 2.00 2.20 0.071 0.079 0.087 E 1.80 2.10 2.40 0.071 0.083 0.094 E1 1.15 1.25 1.35 0.045 0.049 0.053 e 0.65 0.025 e1 1.30 0.051 L 0.26 0.36 0.46 0.010 0.014 0.018 < 0 ° 8 ° 0 ° 8 ° DocID022467 Rev 4 19/32 32

Package information LMV82x, LMV82xA 5.2 SOT23-5 package information Figure 26. SOT23-5 package mechanical drawing Table 11. SOT23-5 package mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 0.90 1.20 1.45 0.035 0.047 0.057 A1 0.15 0.006 A2 0.90 1.05 1.30 0.035 0.041 0.051 B 0.35 0.40 0.50 0.013 0.015 0.019 C 0.09 0.15 0.20 0.003 0.006 0.008 D 2.80 2.90 3.00 0.110 0.114 0.118 D1 1.90 0.075 e 0.95 0.037 E 2.60 2.80 3.00 0.102 0.110 0.118 F 1.50 1.60 1.75 0.059 0.063 0.069 L 0.10 0.35 0.60 0.004 0.013 0.023 K 0 ° 10 ° 0 ° 10 ° 20/32 DocID022467 Rev 4

LMV82x, LMV82xA Package information 5.3 SOT23-6 package information Figure 27. SOT23-6 package mechanical drawing Table 12. SOT23-6 package mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 0.90 1.45 0.035 0.057 A1 0.10 0.004 A2 0.90 1.30 0.035 0.051 b 0.35 0.50 0.013 0.019 c 0.09 0.20 0.003 0.008 D 2.80 3.05 0.110 0.120 E 1.50 1.75 0.060 0.069 e 0.95 0.037 H 2.60 3.00 0.102 0.118 L 0.10 0.60 0.004 0.024 θ 0 ° 10 ° 0 ° 10 ° DocID022467 Rev 4 21/32 32

Package information LMV82x, LMV82xA 5.4 DFN8 2 x 2 mm package information Figure 28. DFN8 2 x 2 mm package mechanical drawing (pitch 0.5mm) Table 13. DFN8 2 x 2 mm package mechanical data (pitch 0.5mm) Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 0.51 0.55 0.60 0.020 0.022 0.024 A1 0.05 0.002 A3 0.15 0.006 b 0.18 0.25 0.30 0.007 0.010 0.012 D 1.85 2.00 2.15 0.073 0.079 0.085 D2 1.45 1.60 1.70 0.057 0.063 0.067 E 1.85 2.00 2.15 0.073 0.079 0.085 E2 0.75 0.90 1.00 0.030 0.035 0.040 e 0.50 0.020 L 0.425 0.017 ddd 0.08 0.003 22/32 DocID022467 Rev 4

LMV82x, LMV82xA Package information 5.5 MiniSO-8 package information Figure 29. MiniSO-8 package mechanical drawing Table 14. MiniSO-8 package mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 1.1 0.043 A1 0 0.15 0 0.006 A2 0.75 0.85 0.95 0.030 0.033 0.037 b 0.22 0.40 0.009 0.016 c 0.08 0.23 0.003 0.009 D 2.80 3.00 3.20 0.11 0.118 0.126 E 4.65 4.90 5.15 0.183 0.193 0.203 E1 2.80 3.00 3.10 0.11 0.118 0.122 e 0.65 0.026 L 0.40 0.60 0.80 0.016 0.024 0.031 L1 0.95 0.037 L2 0.25 0.010 k 0 ° 8 ° 0 ° 8 ° ccc 0.10 0.004 DocID022467 Rev 4 23/32 32

Package information LMV82x, LMV82xA 5.6 MiniSO-10 package information Figure 30. MiniSO-10 package mechanical drawing aaa Table 15. MiniSO-10 package mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 1.10 0.043 A1 0.05 0.10 0.15 0.002 0.004 0.006 A2 0.78 0.86 0.94 0.031 0.034 0.037 b 0.25 0.33 0.40 0.010 0.013 0.016 c 0.15 0.23 0.30 0.006 0.009 0.012 D 2.90 3.00 3.10 0.114 0.118 0.122 E 4.75 4.90 5.05 0.187 0.193 0.199 E1 2.90 3.00 3.10 0.114 0.118 0.122 e 0.50 0.020 L 0.40 0.55 0.70 0.016 0.022 0.028 L1 0.95 0.037 k 0 ° 3 ° 6 ° 0 ° 3 ° 6 ° aaa 0.10 0.004 24/32 DocID022467 Rev 4

LMV82x, LMV82xA Package information 5.7 TSSOP14 package information Figure 31. TSSOP14 package mechanical drawing aaa Table 16. TSSOP14 package mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 1.20 0.047 A1 0.05 0.15 0.002 0.004 0.006 A2 0.80 1.00 1.05 0.031 0.039 0.041 b 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.0089 D 4.90 5.00 5.10 0.193 0.197 0.201 E 6.20 6.40 6.60 0.244 0.252 0.260 E1 4.30 4.40 4.50 0.169 0.173 0.176 e 0.65 0.0256 L 0.45 0.60 0.75 0.018 0.024 0.030 L1 1.00 0.039 k 0 ° 8 ° 0 ° 8 ° aaa 0.10 0.004 DocID022467 Rev 4 25/32 32

Package information LMV82x, LMV82xA 5.8 TSSOP16 package information Figure 32. TSSOP16 package mechanical drawing aaa b Table 17. TSSOP16 package mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 1.20 0.047 A1 0.05 0.15 0.002 0.006 A2 0.80 1.00 1.05 0.031 0.039 0.041 b 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.008 D 4.90 5.00 5.10 0.193 0.197 0.201 E 6.20 6.40 6.60 0.244 0.252 0.260 E1 4.30 4.40 4.50 0.169 0.173 0.177 e 0.65 0.0256 k 0 ° 8 ° 0 ° 8 ° L 0.45 0.60 0.75 0.018 0.024 0.030 L1 1.00 0.039 aaa 0.10 0.004 26/32 DocID022467 Rev 4

LMV82x, LMV82xA Package information 5.9 SO-8 package information Figure 33. SO-8 package mechanical drawing Table 18. SO-8 package mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 1.75 0.069 A1 0.10 0.25 0.004 0.010 A2 1.25 0.049 b 0.28 0.48 0.011 0.019 c 0.17 0.23 0.007 0.010 D 4.80 4.90 5.00 0.189 0.193 0.197 E 5.80 6.00 6.20 0.228 0.236 0.244 E1 3.80 3.90 4.00 0.150 0.154 0.157 e 1.27 0.050 h 0.25 0.50 0.010 0.020 L 0.40 1.27 0.016 0.050 L1 1.04 0.040 k 1 ° 8 ° 1 ° 8 ° ccc 0.10 0.004 DocID022467 Rev 4 27/32 32

Package information LMV82x, LMV82xA 5.10 SO-14 package information Figure 34. SO-14 package mechanical drawing Table 19. SO-14 package mechanical data Dimensions Millimeters Inches Ref. Min. Typ. Max. Min. Typ. Max. A 1.35 1.75 0.05 0.068 A1 0.10 0.25 0.004 0.009 A2 1.10 1.65 0.04 0.06 B 0.33 0.51 0.01 0.02 C 0.19 0.25 0.007 0.009 D 8.55 8.75 0.33 0.34 E 3.80 4.0 0.15 0.15 e 1.27 0.05 H 5.80 6.20 0.22 0.24 h 0.25 0.50 0.009 0.02 L 0.40 1.27 0.015 0.05 k 8 ° (max.) ddd 0.10 0.004 28/32 DocID022467 Rev 4

LMV82x, LMV82xA Ordering information 6 Ordering information Table 20. Order codes Order code Temperature range Package Packing Marking LMV821ICT SC70-5 K1S LMV821ILT SOT23-5 K155 LMV822IQ2T DFN8 2x2 K1S LMV822IST -40 °C to +125 °C MiniSO8 Tape & reel K155 LMV822IDT SO8 LMV822I LMV824IPT TSSOP14 LMV824I LMV824IDT SO14 LMV824I LMV821AICT SC70-5 K1T LMV821AILT SOT23-5 K156 LMV822AIST MiniSO8 K156 -40 °C to +125 °C Tape & reel LMV822AIDT SO8 LMV822AI LMV824AIPT TSSOP14 LMV824AI LMV824AIDT SO14 LMV824AI Table 21. Order codes (with shutdown pin) Order code Temperature range Package Packing Marking LMV820ILT SOT23-6 K155 LMV823IST -40 °C to +125 °C MiniSO10 Tape & reel K155 LMV825IPT TSSOP16 LMV825I LMV820AILT SOT23-6 K156 LMV823AIST -40 °C to +125 °C MiniSO10 Tape & reel K156 LMV825AIPT TSSOP16 LMV825AI DocID022467 Rev 4 29/32 32

Ordering information LMV82x, LMV82xA Table 22. Order codes (automotive grade parts) Temperature Order code Package Packing Marking range LMV821IYLT SOT23-5 K167 LMV822IYST MiniSO8 K167 -40 °C to +125 °C LMV822IYDT SO8 Tape & reel LMV822IY Automotive grade(1) LMV824IYDT SO14 LMV824IY LMV824IYPT TSSOP14 LMV821AIYLT SOT23-5 K168 LMV822AIYST MiniSO8 K168 -40 °C to +125 °C LMV822AIYDT SO8 Tape & reel LMV822AY Automotive grade(1) LMV824AIYDT SO14 LMV824AIY LMV824AIYPT TSSOP14 1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 & Q002 or equivalent. 30/32 DocID022467 Rev 4

LMV82x, LMV82xA Revision history 7 Revision history Table 23. Document revision history Date Revision Changes 10-Nov-2011 1 Initial release. 06-Jul-2012 2 Addition of automotive grade parts. Description and Section4.6: Macromodel: small text changes. Updated Figure1. Updated titles of Figure3, Figure13, and Figure27. 29-Jan-2013 3 Updated Table10, Table11, Table12, and Table22: Order codes (automotive grade parts). Section4.7: Shutdown function: added explanation of Figure23 and Figure24. Updated Table13: “L” dimension changed from 0.5 mm to 0.425 10-Apr-2017 4 mm. Minor text revisions throughout the document, DocID022467 Rev 4 31/32 32

LMV82x, LMV82xA IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2017 STMicroelectronics – All rights reserved 32/32 DocID022467 Rev 4

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S TMicroelectronics: LMV820AILT LMV820ILT LMV821AICT LMV821AILT LMV821ICT LMV821ILT LMV822AIDT LMV822AIST LMV822IDT LMV822IQ2T LMV822IST LMV823AIST LMV823IST LMV824AIDT LMV824AIPT LMV824IDT LMV824IPT LMV825AIPT LMV825IPT LMV821AIYLT LMV821IYLT LMV822AIYDT LMV822IYDT LMV822IYST LMV824AIYPT LMV824IYPT LMV822AIYST LMV824AIYDT LMV824IYDT