LMV341-Q1 LMV344-Q1 www.ti.com.............................................................................................................................................................. SGLS342C–JULY2006–REVISEDJUNE2009 RAIL-TO-RAIL OUTPUT CMOS OPERATIONAL AMPLIFIERS FEATURES 1 • QualifiedforAutomotiveApplications • LowSupplyCurrent:100m ATyp • 2.7-Vand5-VPerformance • GainBandwidth:1MHzTyp • Rail-to-RailOutputSwing • SlewRate:1V/m sTyp • InputBiasCurrent:1pATyp • Turn-OnTimeFromShutdown:5m sTyp • InputOffsetVoltage:0.25mVTyp • InputReferredVoltageNoise(at10kHz): 20nV/√Hz LMV341 LMV344 DBV OR DCK PACKAGE PW PACKAGE (TOPVIEW) (TOPVIEW) IN+ 1 6 V 1OUT 1 14 4OUT + GND 2 5 SHDN 1IN- 2 13 4IN- 1IN+ 3 12 4IN+ IN– 3 4 OUT V 4 11 GND + 2IN+ 5 10 3IN+ 2IN- 6 9 3IN- 2OUT 7 8 3OUT DESCRIPTION/ORDERING INFORMATION The LMV341 and LMV344 devices are single and quad CMOS operational amplifiers, respectively, with low voltage, low power, and rail-to-rail output swing capabilities. The PMOS input stage offers an ultra-low input bias current of 1 pA (typ) and an offset voltage of 0.25 mV (typ). The single supply amplifier is designed specifically for low-voltage (2.7 V to 5 V) operation, with a wide common-mode input voltage range that typically extends from –0.2 V to 0.8 V from the positive supply rail. Additional features are a 20-nV/√Hz voltage noise at 10 kHz, 1-MHzunity-gainbandwidth,1-V/m sslewrate,and100-m Acurrentconsumptionperchannel. An extended industrial temperature range from –40°C to 125°C makes this device suitable for automotive applications. ORDERINGINFORMATION(1) T PACKAGE(2) ORDERABLEPARTNUMBER TOP-SIDEMARKING(3) A SC-70–DCK Reelof3000 LMV341QDCKRQ1 RR_ –40°Cto125°C SOT-23–DBV Reelof3000 LMV341QDBVRQ1 RCH_ TSSOP–PW Reelof2000 LMV344IPWRQ1 LMV344Q (1) Forthemostcurrentpackageandorderinginformation,seethePackageOptionAddendumattheendofthisdocument,orseetheTI websiteatwww.ti.com. (2) Packagedrawings,thermaldata,andsymbolizationareavailableatwww.ti.com/packaging. (3) DBV/DCK:Theactualtop-sidemarkinghasoneadditionalcharacterthatdesignatesthewaferfab/assemblysite. 1 Pleasebeawarethatanimportantnoticeconcerningavailability,standardwarranty,anduseincriticalapplicationsofTexas Instrumentssemiconductorproductsanddisclaimerstheretoappearsattheendofthisdatasheet. PRODUCTIONDATAinformationiscurrentasofpublicationdate. Copyright©2006–2009,TexasInstrumentsIncorporated Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarilyincludetestingofallparameters.

LMV341-Q1 LMV344-Q1 SGLS342C–JULY2006–REVISEDJUNE2009.............................................................................................................................................................. www.ti.com APPLICATIONCIRCUIT:SAMPLE-AND-HOLDCIRCUIT V+ V+ − − VO + VI + C = 200 pF Sample Clock ABSOLUTE MAXIMUM RATINGS(1) overoperatingfree-airtemperaturerange(unlessotherwisenoted) V Supplyvoltage(2) 5.5V + V Differentialinputvoltage(3) ±5.5V ID V Inputvoltagerange(eitherinput) 0to5.5V I DBVpackage 165°C/W q Packagethermalimpedance(4)(5) DCKpackage 259°C/W JA PWpackage 113°C/W T Operatingvirtualjunctiontemperature 150°C J T Storagetemperaturerange –65°Cto150°C stg (1) Stressesbeyondthoselistedunder"absolutemaximumratings"maycausepermanentdamagetothedevice.Thesearestressratings only,andfunctionaloperationofthedeviceattheseoranyotherconditionsbeyondthoseindicatedunder"recommendedoperating conditions"isnotimplied.Exposuretoabsolute-maximum-ratedconditionsforextendedperiodsmayaffectdevicereliability. (2) Allvoltagevalues(exceptdifferentialvoltagesandV specifiedforthemeasurementofI )arewithrespecttothenetworkGND. + OS (3) DifferentialvoltagesareatIN+withrespecttoIN−. (4) MaximumpowerdissipationisafunctionofT(max),q ,andT .Themaximumallowablepowerdissipationatanyallowableambient J JA A temperatureisP =(T(max)–T )/q .OperatingattheabsolutemaximumT of150°Ccanaffectreliability. D J A JA J (5) ThepackagethermalimpedanceiscalculatedinaccordancewithJESD51-7. RECOMMENDED OPERATING CONDITIONS MIN MAX UNIT V Supplyvoltage(single-supplyoperation) 2.5 5.5 V + T Operatingfree-airtemperature –40 125 °C A ESD PROTECTION TESTCONDITIONS TYP UNIT Human-BodyModel(HBM) 2000 V MachineModel(MM) 200 V 2 SubmitDocumentationFeedback Copyright©2006–2009,TexasInstrumentsIncorporated ProductFolderLink(s):LMV341-Q1LMV344-Q1

LMV341-Q1 LMV344-Q1 www.ti.com.............................................................................................................................................................. SGLS342C–JULY2006–REVISEDJUNE2009 ELECTRICAL CHARACTERISTICS V =2.7V,GND=0V,V =V =V /2,R >1MΩ(unlessotherwisenoted) + IC O + L LMV341 LMV344 PARAMETER TESTCONDITIONS TA MIN TYP(1) MAX MIN TYP(1) MAX UNIT 25°C 0.25 4 0.25 4 VIO Inputoffsetvoltage mV Fullrange 4.5 4.5 Averagetemperature a VIO coefficientofinput Fullrange 1.7 1.7 m V/°C offsetvoltage 25°C 1 120 1 120 pA IIB Inputbiascurrent –40°Cto85°C 250 250 –40°Cto125°C 3 3 nA IIO Inputoffsetcurrent 25°C 6.6 6.6 fA Common-mode 0≤VICR≤1.7V 25°C 40 80 56 80 CMRR dB rejectionratio 0≤VICR≤1.6V Fullrange 36 50 Supply-voltage 25°C 45 82 65 82 kSVR rejectionratio 2.7V≤V+≤5V Fullrange 60 60 dB Common-modeinput –0.2 –0.2 VICR voltagerange CMRR≥50dB 25°C 0 to1.9 1.7 0 to1.9 1.7 V 25°C 73 113 78 113 RL=10kΩto1.35V Large-signalvoltage Fullrange 66 70 AV gain(2) 25°C 70 103 72 103 dB RL=2kΩto1.35V Fullrange 63 64 25°C 24 60 24 60 Lowlevel Fullrange 95 95 RL=2kΩto1.35V 25°C 26 60 26 60 Highlevel Outputswing Fullrange 95 95 VO (deltafromsupply mV rails) 25°C 5 30 5 30 Lowlevel Fullrange 40 40 RL=10kΩto1.35V 25°C 5.3 30 5.3 30 Highlevel Fullrange 40 40 ICC S(pueprpclyhacnunrreel)nt Fu2ll5r°aCnge 100 127300 100 127300 m A Outputshort-circuit Sourcing 20 32 18 24 IOS current Sinking 25°C 15 24 15 24 mA SR Slewrate RL=10kΩ(3) 25°C 1 1 V/m s GBM Unity-gainbandwidth RL=10kΩ,CL=200pF 25°C 1 1 MHz Φm Phasemargin RL=100kΩ 25°C 72 72 deg Gm Gainmargin RL=100kΩ 25°C 20 20 dB Equivalentinputnoise Vn voltage f=1kHz 25°C 40 40 nV/√Hz Equivalentinputnoise In current f=1kHz 25°C 0.001 0.001 pA/√Hz THD Totalharmonic f=1kHz,AV=1, 25°C 0.017 0.017 % distortion RL=600Ω,VI=1VPP (1) Typicalvaluesrepresentthemostlikelyparametricnorm. (2) GND+0.2V≤V ≤V –0.2V O + (3) Connectedasvoltagefollowerwith2-V stepinput.Numberspecifiedistheslowerofthepositiveandnegativeslewrates. PP Copyright©2006–2009,TexasInstrumentsIncorporated SubmitDocumentationFeedback 3 ProductFolderLink(s):LMV341-Q1LMV344-Q1

LMV341-Q1 LMV344-Q1 SGLS342C–JULY2006–REVISEDJUNE2009.............................................................................................................................................................. www.ti.com SHUTDOWN CHARACTERISTICS V =2.7V,GND=0V,V =V =V /2,R >1MΩ(unlessotherwisenoted) + IC O + L PARAMETER TESTCONDITIONS TA MIN TYP MAX UNIT Supplycurrentinshutdownmode 25°C 0.045 1000 nA ICC(SHDN) (perchannel) VSD=0V Fullrange 1.5 m A t(on) Amplifierturn-ontime 25°C 5 m s ONmode 1.7to2.7 2.4to2.7 VSD Shutdownpinvoltagerange 25°C V Shutdownmode 0to1 0to0.8 4 SubmitDocumentationFeedback Copyright©2006–2009,TexasInstrumentsIncorporated ProductFolderLink(s):LMV341-Q1LMV344-Q1

LMV341-Q1 LMV344-Q1 www.ti.com.............................................................................................................................................................. SGLS342C–JULY2006–REVISEDJUNE2009 ELECTRICAL CHARACTERISTICS V =5V,GND=0V,V =V =V /2,R >1MΩ(unlessotherwisenoted) + IC O + L LMV341 LMV344 PARAMETER TESTCONDITIONS TA MIN TYP(1) MAX MIN TYP(1) MAX UNIT 25°C 0.25 4 0.25 4 VIO Inputoffsetvoltage mV Fullrange 4.5 4.5 Averagetemperature a VIO coefficientofinput Fullrange 1.9 1.9 m V/°C offsetvoltage 25°C 1 200 1 200 pA IIB Inputbiascurrent –40°Cto85°C 375 375 –40°Cto125°C 5 5 nA IIO Inputoffsetcurrent 25°C 6.6 6.6 fA Common-mode 0≤VICR≤4V 25°C 46 86 56 86 CMRR dB rejectionratio 0≤VICR≤3.9V Fullrange 47 50 Supply-voltage 25°C 45 82 65 82 kSVR rejectionratio 2.7V≤V+≤5V Fullrange 44 60 dB Common-modeinput –0.2 –0.2 VICR voltagerange CMRR≥50dB 25°C 0 to4.2 4 0 to4.2 4 V 25°C 78 116 78 116 RL=10kΩto2.5V Large-signalvoltage Fullrange 70 70 AV gain(2) 25°C 72 107 72 107 dB RL=2kΩto2.5V Fullrange 64 64 25°C 32 67 32 60 Lowlevel Fullrange 95 95 RL=2kΩto2.5V 25°C 34 60 34 60 Highlevel Outputswing Fullrange 95 95 VO (deltafromsupply mV rails) 25°C 7 30 7 30 Lowlevel Fullrange 45 40 RL=10kΩto2.5V 25°C 7 30 7 30 Highlevel Fullrange 40 40 ICC S(pueprpclyhacnunrreel)nt Fu2ll5r°aCnge 107 220600 107 220600 m A Outputshort-circuit Sourcing 85 113 70 90 IOS current Sinking 25°C 50 75 50 75 mA SR Slewrate RL=10kΩ(3) 25°C 1 1 V/m s GBM Unity-gainbandwidth RL=10kΩ,CL=200pF 25°C 1 1 MHz Φm Phasemargin RL=100kΩ 25°C 70 70 deg Gm Gainmargin RL=100kΩ 25°C 20 20 dB Equivalentinputnoise Vn voltage f=1kHz 25°C 39 39 nV/√Hz Equivalentinputnoise In current f=1kHz 25°C 0.001 0.001 pA/√Hz THD Totalharmonic f=1kHz,AV=1, 25°C 0.012 0.012 % distortion RL=600Ω,VI=1VPP (1) Typicalvaluesrepresentthemostlikelyparametricnorm. (2) GND+0.2V≤V ≤V –0.2V O + (3) Connectedasvoltagefollowerwith2-V stepinput.Numberspecifiedistheslowerofthepositiveandnegativeslewrates. PP Copyright©2006–2009,TexasInstrumentsIncorporated SubmitDocumentationFeedback 5 ProductFolderLink(s):LMV341-Q1LMV344-Q1

LMV341-Q1 LMV344-Q1 SGLS342C–JULY2006–REVISEDJUNE2009.............................................................................................................................................................. www.ti.com SHUTDOWN CHARACTERISTICS V =5V,GND=0V,V =V =V /2,R >1MΩ(unlessotherwisenoted) + IC O + L PARAMETER TESTCONDITIONS TA MIN TYP MAX UNIT ICC(SHDN) S(pueprpclyhacnunrreel)ntinshutdownmode VSD=0V Fu2ll5r°aCnge 0.033 1.51 m A t(on) Amplifierturn-ontime 25°C 5 m s ONmode 3.1to5 4.5to5 VSD Shutdownpinvoltagerange 25°C V Shutdownmode 0to1 0to0.8 6 SubmitDocumentationFeedback Copyright©2006–2009,TexasInstrumentsIncorporated ProductFolderLink(s):LMV341-Q1LMV344-Q1

LMV341-Q1 LMV344-Q1 www.ti.com.............................................................................................................................................................. SGLS342C–JULY2006–REVISEDJUNE2009 TYPICAL CHARACTERISTICS SUPPLYCURRENT INPUTBIASCURRENT vs vs SUPPLYVOLTAGE TEMPERATURE 130 1000 V+ = 5 V 120 110 A A p 100 mnt − 100 125°C ent − urre 90 85°C Curr ply C 80 25°C Bias 10 Sup 70 put − n C 60 − I IC B 50 −40°C II 1 40 30 0.1 1.5 2 2.5 3 3.5 4 4.5 5 −40 −20 0 20 40 60 80 100 120 140 VCC − Supply Voltage − V TA − Free-Air Temperature − °C Figure1. Figure2. OUTPUTVOLTAGESWING OUTPUTVOLTAGESWING vs vs SUPPLYVOLTAGE SUPPLYVOLTAGE 35 7 mV RL = 2 kW mV RL = 10 kW m Supply Voltage − 2350 Negative Swing m Supply Voltage − 56..655 Negative Swing wing Fro 20 wing Fro 4.55 Output S 15 Positive Swing Output S 4 V − O V − O 3.5 Positive Swing 10 3 1.5 2 2.5 3 3.5 4 4.5 5 1.5 2 2.5 3 3.5 4 4.5 5 VCC − Supply Voltage − V VCC − Supply Voltage − V Figure3. Figure4. Copyright©2006–2009,TexasInstrumentsIncorporated SubmitDocumentationFeedback 7 ProductFolderLink(s):LMV341-Q1LMV344-Q1

LMV341-Q1 LMV344-Q1 SGLS342C–JULY2006–REVISEDJUNE2009.............................................................................................................................................................. www.ti.com TYPICAL CHARACTERISTICS (continued) SOURCECURRENT SOURCECURRENT vs vs OUTPUTVOLTAGE OUTPUTVOLTAGE 1000 1000 V+ = 2.7 V V+ = 5 V −40°C 100 100 A −40°C A m m Source Current − 110 125°C85°C 25°C Source Current − 110 125°8C5°C25°C I − S I − S 0.1 0.1 0.01 0.01 0.001 0.01 0.1 1 10 0.001 0.01 0.1 1 10 VO − Output Voltage Referenced to V+ (V) VO − Output Voltage Referenced to V+ (V) Figure5. Figure6. SINKCURRENT SINKCURRENT vs vs OUTPUTVOLTAGE OUTPUTVOLTAGE 1000 1000 V+ = 2.7 V V+ = 5 V mA 100 −40°C 100 −40°C − A nt m urre 10 nt − 10 k C 25°C rre 25°C n u I − SiS 1 125°C85°C − Sink CS 1 125°C 85°C I 0.1 0.1 0.01 0.01 0.001 0.01 0.1 1 10 0.001 0.01 0.1 1 10 VO − Output Voltage Referenced to V− (V) VO − Output Voltage Referenced to V− (V) Figure7. Figure8. 8 SubmitDocumentationFeedback Copyright©2006–2009,TexasInstrumentsIncorporated ProductFolderLink(s):LMV341-Q1LMV344-Q1

LMV341-Q1 LMV344-Q1 www.ti.com.............................................................................................................................................................. SGLS342C–JULY2006–REVISEDJUNE2009 TYPICAL CHARACTERISTICS (continued) OFFSETVOLTAGE OFFSETVOLTAGE vs vs COMMON-MODEVOLTAGE COMMON-MODEVOLTAGE 1 1 V+ = 2.7 V V+ = 5 V 0.5 0.5 0 0 V V m m − − e −0.5 e −0.5 g g a a set Volt −1 125°C set Volt −1 125°C − Off −1.5 85°C − Off −1.5 85°C O O 25°C VI −2 25°C VI −2 −40°C −40°C −2.5 −2.5 −3 −3 −0.2 0.8 1.8 2.8 −0.2 0.8 1.8 2.8 3.8 4.8 5.8 VIC − Common-Mode Voltage − V VIC − Common-Mode Voltage − V Figure9. Figure10. INPUTVOLTAGE INPUTVOLTAGE vs vs OUTPUTVOLTAGE OUTPUTVOLTAGE 300 300 V+ /GND = ±2.5 V V+ /GND = ±1.35 V 200 V 200 RL = 2 kW m− V 100 RL = 2 kW mge − 100 − Input Voltage 0 RL = 10 kW V − Input VoltaI 0 RL = 10 kW V I −100 −100 −200 −200 −300 −300 −3 −2 −1 0 1 2 3 −1.5 −1 −0.5 0 0.5 1 1.5 VO − Output Voltage − V VO − Output Voltage − V Figure11. Figure12. Copyright©2006–2009,TexasInstrumentsIncorporated SubmitDocumentationFeedback 9 ProductFolderLink(s):LMV341-Q1LMV344-Q1

LMV341-Q1 LMV344-Q1 SGLS342C–JULY2006–REVISEDJUNE2009.............................................................................................................................................................. www.ti.com TYPICAL CHARACTERISTICS (continued) SLEWRATE SLEWRATE vs vs SUPPLYVOLTAGE TEMPERATURE 1.9 2.5 RL = 10 kW 1.7 Falling Edge 2.3 AVVI = = 2 1 VPP 2.1 V+ = 2.7 V s 1.5 s 1.9 mV/ mV/ Falling Edge − − 1.7 e 1.3 e at at R R 1.5 w Rising Edge w Sle 1.1 Sle 1.3 R − R − Rising Edge S 0.9 S 1.1 RL = 10 kW 0.9 0.7 AV = 1 VI = 0.8 VPP for V+ < 2.7 V 0.7 VI = 2 VPP for V+ > 2.7 V 0.5 0.5 1.5 2 2.5 3 3.5 4 4.5 5 −40 −20 0 20 40 60 80 100 120 140 VCC − Supply Voltage − V VCC − Supply Voltage − V Figure13. Figure14. SLEWRATE CMRR vs vs TEMPERATURE FREQUENCY 2.5 100 RL = 10 kW 2.3 AV = 1 90 2.1 VVI+ = = 2 5 V VPP 80 5 V s 1.9 Falling Edge 70 mV/ − 1.7 60 e B w Rat 1.5 n − d 50 2.7 V e ai Sl 1.3 Rising Edge G 40 − R S 1.1 30 0.9 20 0.7 10 VI = V+ /2 RL = 5 kW 0.5 0 −40 −20 0 20 40 60 80 100 120 140 100 1k 10k 100k 1M VCC − Supply Voltage − V f − Frequency − Hz Figure15. Figure16. 10 SubmitDocumentationFeedback Copyright©2006–2009,TexasInstrumentsIncorporated ProductFolderLink(s):LMV341-Q1LMV344-Q1

LMV341-Q1 LMV344-Q1 www.ti.com.............................................................................................................................................................. SGLS342C–JULY2006–REVISEDJUNE2009 TYPICAL CHARACTERISTICS (continued) PSRR INPUTVOLTAGENOISE vs vs FREQUENCY FREQUENCY 100 220 +PSRR (2.7 V) 90 200 −PSRR (2.7 V) 80 Hz 180 70 nV/ 160 − e 140 dB 60 −PSRR (5 V) ois Gain − 4500 +PSRR (5 V) oltage N 110200 V ut 80 30 p 5 V − In 60 2.7 V 20 V I 40 10 20 RL = 5 kW 0 0 100 1k 10k 100k 1M 10M 10 100 1k 10k f − Frequency − Hz f − Frequency − Hz Figure17. Figure18. TOTALHARMONICDISTORTION+NOISE TOTALHARMONICDISTORTION+NOISE vs vs FREQUENCY OUTPUTVOLTAGE 10 10 % RL = 600 W % f = 10 kHz onic Distortion + Noise − 0.11 VVOO ==A 212V. .7V=5 PVV1P0P fPo fro Vr +VA =+V =2=.5 751 V 0VV nic Distortion + Noise − 1 RL = 600 W AV2 =.7 1 V0 AV5 = V 10 m o 0.01 2.7 V m r Total Ha AV = 1 otal Har 0.1 D+N − 0.001 5A VV = 1 +N − T AV 5= V1 A2V. 7= V1 H D T H T 0.0001 0.01 10 100 1k 10k 100k 0.001 0.01 0.1 1 10 f − Frequency − Hz VO − Output Voltage − VPP Figure19. Figure20. Copyright©2006–2009,TexasInstrumentsIncorporated SubmitDocumentationFeedback 11 ProductFolderLink(s):LMV341-Q1LMV344-Q1

LMV341-Q1 LMV344-Q1 SGLS342C–JULY2006–REVISEDJUNE2009.............................................................................................................................................................. www.ti.com TYPICAL CHARACTERISTICS (continued) GAINANDPHASEMARGIN vs FREQUENCY (T =–40°C,25°C,125°C) A 160 140 Phase V+ = 5 V 120 RL = 2 kW 140 120 100 g e 100 D B 80 −40°C n − Gain − d 60 Gain −40°C 25°C 80 e Margi 60 s 40 a h 125°C P 40 20 25°C 125°C 20 0 0 −20 1k 10k 100k 1M 10M f − Frequency − Hz Figure21. GAINANDPHASEMARGIN vs FREQUENCY (R =600Ω,2kΩ,100kΩ) L 140 160 V+ = 2.7 V Closed-Loop 120 Gain = 60 dB 140 100 Phase 120 g e 80 100 D B − ain − d 60 Gain RLR =L 6 =0 02 WkW 80 Margin G RL = 100 kW e 40 60 as h RL = 100 kW P 20 40 0 RL = 2 kW RL = 600 W 20 −20 0 1k 10k 100k 1M 10M f − Frequency − Hz Figure22. 12 SubmitDocumentationFeedback Copyright©2006–2009,TexasInstrumentsIncorporated ProductFolderLink(s):LMV341-Q1LMV344-Q1

LMV341-Q1 LMV344-Q1 www.ti.com.............................................................................................................................................................. SGLS342C–JULY2006–REVISEDJUNE2009 TYPICAL CHARACTERISTICS (continued) GAINANDPHASEMARGIN vs FREQUENCY (R =600Ω,2kΩ,100kΩ) L 160 140 V+ = 5 V Closed-Loop 140 120 Phase Gain = 60 dB 120 100 g e 100 D Gain − dB 6800 Gain RL = 100 kW RL =R 6L 0=0 2 W kW 80 e Margin − 60 s 40 a h RL = 100 kW P 40 20 RL = 2 kW 0 RL = 600 W 20 0 −20 1k 10k 100k 1M 10M f − Frequency − Hz Figure23. GAINANDPHASEMARGIN vs FREQUENCY (C =0pF,100pF,500pF,1000pF) L 140 100 Phase V+ = 5 V 120 RClLo =s e6d0-0L Woop Gain = 60 dB CL = 0 pF 80 100 60 CL = 100 pF 80 40 eg Gain CL = 500 pF − D Gain − dB 4600 CL = 1000 pF 020 e Margin CL = 0 pF as 20 −20 Ph 0 −40 −20 CL = 500 pF −60 CL = 1000 pF CL = 100 pF −40 −80 1k 10k 100k 1M 10M f − Frequency − Hz Figure24. Copyright©2006–2009,TexasInstrumentsIncorporated SubmitDocumentationFeedback 13 ProductFolderLink(s):LMV341-Q1LMV344-Q1

LMV341-Q1 LMV344-Q1 SGLS342C–JULY2006–REVISEDJUNE2009.............................................................................................................................................................. www.ti.com TYPICAL CHARACTERISTICS (continued) SMALL-SIGNALNONINVERTINGRESPONSE LARGE-SIGNALNONINVERTINGRESPONSE 0.25 0.1 6 2 Input Input 0.2 0.05 5 1 4 0 V − Output Voltage − VO000..01.1055 TRVA+L / =G= N−24 Dk0 W°=C ±2.5 V −−−0000...11055 V − Input Voltage − VI V − Output Voltage − VO 123 TRVA+L / =G= N−24 Dk0 W°=C ±2.5 V −−−321 V − Input Voltage − VI 0 −4 −0.05 −0.2 −1 −5 Output Output −0.1 −0.25 −2 −6 4 m s/div(cid:1) 4 m s/div(cid:1) Figure25. Figure26. SMALL-SIGNALNONINVERTINGRESPONSE LARGE-SIGNALNONINVERTINGRESPONSE 0.25 0.1 6 2 Input Input 5 1 0.2 0.05 4 0 V V − Output Voltage − VO 000..01.0155 TRVA+L / =G= N225 Dk° WC= ±2.5 V −−−0000...11055 V − Input Voltage − VI V − Output Voltage − O 0123 TRVA+L / =G= N225 Dk° WC= ±2.5 V −−−−4321 V − Input Voltage − VI −0.05 −0.2 −1 −5 Output Output −0.1 4 m s/div(cid:1) −0.25 −2 4 m s/div(cid:1) −6 Figure27. Figure28. 14 SubmitDocumentationFeedback Copyright©2006–2009,TexasInstrumentsIncorporated ProductFolderLink(s):LMV341-Q1LMV344-Q1

LMV341-Q1 LMV344-Q1 www.ti.com.............................................................................................................................................................. SGLS342C–JULY2006–REVISEDJUNE2009 TYPICAL CHARACTERISTICS (continued) SMALL-SIGNALNONINVERTINGRESPONSE LARGE-SIGNALNONINVERTINGRESPONSE 0.25 0.1 6 2 Input Input 0.2 0.05 5 1 V − Output Voltage − VO 000..01.0155 TRVA+L / =G= N122 Dk5 W°=C ±2.5 V −−−0000...11055 V − Input Voltage − VI V − Output Voltage − VO 1234 TRVA+L / =G= N122 Dk5 W°=C ±2.5 V −−−0321 V − Input Voltage − VI 0 −4 −0.05 −0.2 −1 −5 Output Output −0.1 4 m s/div(cid:1) −0.25 −2 4 m s/div(cid:1) −6 Figure29. Figure30. SMALL-SIGNALINVERTINGRESPONSE LARGE-SIGNALINVERTINGRESPONSE 0.25 0.1 6 2 Input Input 0.2 0.05 5 1 4 0 V − Output Voltage − VO000..01.1055 TRVA+L / =G= N−24 Dk0 W°=C ±2.5 V −−−0000...11055 V − Input Voltage − VI V − Output Voltage − VO 123 TRVA+L / =G= N−24 Dk0 W°=C ±2.5 V −−−321 V − Input Voltage − VI 0 −4 −0.05 −0.2 −1 −5 Output Output −0.1 −0.25 −2 −6 4 m s/div(cid:1) 4 m s/div(cid:1) Figure31. Figure32. Copyright©2006–2009,TexasInstrumentsIncorporated SubmitDocumentationFeedback 15 ProductFolderLink(s):LMV341-Q1LMV344-Q1

LMV341-Q1 LMV344-Q1 SGLS342C–JULY2006–REVISEDJUNE2009.............................................................................................................................................................. www.ti.com TYPICAL CHARACTERISTICS (continued) SMALL-SIGNALINVERTINGRESPONSE LARGE-SIGNALINVERTINGRESPONSE 0.25 0.1 6 2 Input Input 0.2 0.05 5 1 4 0 V − Output Voltage − VO 000..01.0155 TRVA+L / =G= N225 Dk° WC= ±2.5 V −−−0000...11055V − Input Voltage − VI V − Output Voltage − VO123 TRVA+L / =G= N225 Dk° WC= ±2.5 V −−−321 V − Input Voltage − VI 0 −4 −0.05 −0.2 −1 −5 Output Output −0.1 −0.25 −2 −6 4 m s/div(cid:1) 4 m s/div(cid:1) Figure33. Figure34. SMALL-SIGNALINVERTINGRESPONSE LARGE-SIGNALINVERTINGRESPONSE 0.25 0.1 6 2 Input Input 0.2 0.05 5 1 4 0 − Output Voltage − VO000..01.155 TRVA+L / =G= N122 Dk5 W°=C ±2.5 V −−000..105V − Input Voltage − VI − Output Voltage − VO 123 TRVA+L / =G= N122 Dk5 W°=C ±2.5 V −−−321 V − Input Voltage − VI V 0 −0.15 V 0 −4 −0.05 −0.2 −1 −5 Output Output −0.1 −0.25 −2 −6 4 m s/div(cid:1) 4 m s/div(cid:1) Figure35. Figure36. 16 SubmitDocumentationFeedback Copyright©2006–2009,TexasInstrumentsIncorporated ProductFolderLink(s):LMV341-Q1LMV344-Q1

PACKAGE OPTION ADDENDUM www.ti.com 20-Apr-2020 PACKAGING INFORMATION Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) LMV341QDBVRQ1 ACTIVE SOT-23 DBV 6 3000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 RCHE & no Sb/Br) LMV341QDCKRQ1 ACTIVE SC70 DCK 6 3000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 RRE & no Sb/Br) LMV344IPWRQ1 ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LMV344Q & no Sb/Br) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. Addendum-Page 1

PACKAGE OPTION ADDENDUM www.ti.com 20-Apr-2020 In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF LMV341-Q1, LMV344-Q1 : •Catalog: LMV341, LMV344 NOTE: Qualified Version Definitions: •Catalog - TI's standard catalog product Addendum-Page 2

PACKAGE MATERIALS INFORMATION www.ti.com 3-Aug-2017 TAPE AND REEL INFORMATION *Alldimensionsarenominal Device Package Package Pins SPQ Reel Reel A0 B0 K0 P1 W Pin1 Type Drawing Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant (mm) W1(mm) LMV341QDBVRQ1 SOT-23 DBV 6 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LMV341QDCKRQ1 SC70 DCK 6 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 LMV344IPWRQ1 TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 PackMaterials-Page1

PACKAGE MATERIALS INFORMATION www.ti.com 3-Aug-2017 *Alldimensionsarenominal Device PackageType PackageDrawing Pins SPQ Length(mm) Width(mm) Height(mm) LMV341QDBVRQ1 SOT-23 DBV 6 3000 203.0 203.0 35.0 LMV341QDCKRQ1 SC70 DCK 6 3000 203.0 203.0 35.0 LMV344IPWRQ1 TSSOP PW 14 2000 367.0 367.0 35.0 PackMaterials-Page2

None

None

PACKAGE OUTLINE DBV0006A SOT-23 - 1.45 mm max height SCALE 4.000 SMALL OUTLINE TRANSISTOR C 3.0 2.6 0.1 C 1.75 1.45 B A 1.45 MAX PIN 1 INDEX AREA 1 6 2X 0.95 3.05 2.75 1.9 5 2 4 3 0.50 6X 0.25 0.15 0.2 C A B (1.1) TYP 0.00 0.25 GAGE PLANE 0.22 TYP 0.08 8 TYP 0.6 0 0.3 TYP SEATING PLANE 4214840/B 03/2018 NOTES: 1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. Body dimensions do not include mold flash or protrusion. Mold flash and protrusion shall not exceed 0.15 per side. 4. Leads 1,2,3 may be wider than leads 4,5,6 for package orientation. 5. Refernce JEDEC MO-178. www.ti.com

EXAMPLE BOARD LAYOUT DBV0006A SOT-23 - 1.45 mm max height SMALL OUTLINE TRANSISTOR PKG 6X (1.1) 1 6X (0.6) 6 SYMM 2 5 2X (0.95) 3 4 (R0.05) TYP (2.6) LAND PATTERN EXAMPLE EXPOSED METAL SHOWN SCALE:15X SOLDER MASK SOLDER MASK METAL UNDER METAL OPENING OPENING SOLDER MASK EXPOSED METAL EXPOSED METAL 0.07 MAX 0.07 MIN ARROUND ARROUND NON SOLDER MASK SOLDER MASK DEFINED DEFINED (PREFERRED) SOLDER MASK DETAILS 4214840/B 03/2018 NOTES: (continued) 6. Publication IPC-7351 may have alternate designs. 7. Solder mask tolerances between and around signal pads can vary based on board fabrication site. www.ti.com

EXAMPLE STENCIL DESIGN DBV0006A SOT-23 - 1.45 mm max height SMALL OUTLINE TRANSISTOR PKG 6X (1.1) 1 6X (0.6) 6 SYMM 2 5 2X(0.95) 3 4 (R0.05) TYP (2.6) SOLDER PASTE EXAMPLE BASED ON 0.125 mm THICK STENCIL SCALE:15X 4214840/B 03/2018 NOTES: (continued) 8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations. 9. Board assembly site may have different recommendations for stencil design. www.ti.com

None

None

IMPORTANTNOTICEANDDISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2020, Texas Instruments Incorporated