LMV321, LMV358, LMV324 Low cost, low power, input/output rail-to-rail operational amplifiers Datasheet - production data LMV321ILT Features (SOT23-5) Operating range from V = 2.7 to 6 V CC Rail-to-rail input and output Extended V (V - 0.2 V to V + 0.2 V) icm DD CC Low supply current (145 µA) Gain bandwidth product (1 MHz) ESD tolerance (2 kV) LMV321RILT Related products (SOT23-5) See LMV321L, LMV358L, LMV324L for newer technological version See TSV851, TSV852, TSV854 for enhanced performances Applications LMV358ID/IDT-LMV358IPT Battery powered electronic equipment (SO8,TSSOP8) Personal medical care (glucose meters) Laptops Description The LMV321/358/324 family (single, dual, and quad) answers the need for low cost, general- purpose operational amplifiers. They operate with voltages as low as 2.7 V and feature both input LMV324ID/IDT-LMV324IPT and output rail-to-rail, 145 µA consumption (SO14,TSSOP14) current, and 1 MHz gain bandwidth product (GBP). With such a low consumption and a sufficient GBP for many applications, these op amps are well suited for any kind of battery supplied and portable equipment application. The LMV321 device is housed in the space- saving 5-pin SOT23-5 package, which simplifies board design. The SOT23-5 has two pinning configurations to answer all application requirements. October 2015 DocID11887 Rev 8 1/17 This is information on a product in full production. www.st.com

Contents LMV321, LMV358, LMV324 Contents 1 Absolute maximum ratings and operating conditions ................. 3 2 Electrical characteristics ................................................................ 5 3 Package information ....................................................................... 9 3.1 SOT23-5 package information ........................................................ 10 3.2 SO8 package information ................................................................ 11 3.3 TSSOP8 package information ......................................................... 12 3.4 SO14 package information .............................................................. 13 3.5 TSSOP14 package information ....................................................... 14 4 Ordering information ..................................................................... 15 5 Revision history ............................................................................ 16 2/17 DocID11887 Rev 8

LMV321, LMV358, LMV324 Absolute maximum ratings and operating conditions 1 Absolute maximum ratings and operating conditions Table 1: Absolute maximum ratings Symbol Parameter Value Unit V Supply voltage (1) 7 CC V Differential input voltage (2) ±1 V id V Input voltage V - 0.3 to V + 0.3 in DD CC T Operating free air temperature range -40 to 125 oper T Storage temperature -65 to 150 °C stg T Maximum junction temperature 150 j SOT23-5 250 SO8 125 R Thermal resistance junction-to-ambient (3) TSSOP8 120 thja SO14 103 TSSOP14 100 °C/W SOT23-5 81 SO8 40 R Thermal resistance junction-to-case(3) TSSOP8 37 thjc SO14 31 TSSOP14 32 HBM: human body model (4) 2 kV ESD MM: machine model (5) 200 V CDM: charged device model (6) 1.5 kV Lead temperature (soldering, 10 s) 250 °C Output short-circuit duration See (7) Notes: (1)All voltage values, except differential voltage are with respect to network terminal. (2)The differential voltage is the non-inverting input terminal with respect to the inverting input terminal. If Vid > ±1 V, the maximum input current must not exceed ±1 mA. In this case (Vid > ±1 V), an input series resistor must be added to limit input current. (3)Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short-circuits on all amplifiers. All values are typical. (4)Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a 1.5 kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations while the other pins are floating. (5)Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of connected pin combinations while the other pins are floating. (6)Charged device model: all pins and the package are charged together to the specified voltage and then discharged directly to the ground through only one pin. This is done for all pins. No value specified for CDM on SOT23-5 package. The value is given for SO8 and TSSOP packages. (7)Short-circuits from the output to VCC can cause excessive heating. The maximum output current is approximately 48 mA, independent of the magnitude of VCC. Destructive dissipation can result from simultaneous short-circuits on all amplifiers. DocID11887 Rev 8 3/17

Absolute maximum ratings and operating LMV321, LMV358, LMV324 conditions Table 2: Operating conditions Symbol Parameter Value Unit V Supply voltage 2.7 to 6 CC V Common mode input voltage range (1) V - 0.2 to V + 0.2 V icm DD CC V Common mode input voltage range (2) V to V icm DD CC T Operating free air temperature range -40 to 125 °C oper Notes: (1)At 25 °C, for 2.7 ≤ VCC ≤ 6 V, Vicm is extended to VDD - 0.2 V, VCC + 0.2 V. (2)In full temperature range, both rails can be reached when VCC does not exceed 5.5 V. 4/17 DocID11887 Rev 8

LMV321, LMV358, LMV324 Electrical characteristics 2 Electrical characteristics Table 3: Electrical characteristics at VCC = 2.7 V, VDD = 0 V, CL and RL connected to VCC/2, Tamb = 25 °C (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. Unit V = V = V /2 0.1 3 icm out CC V Input offset voltage mV io T ≤ T ≤ T 6 min amb max ΔV /ΔT Input offset voltage drift 2 µV/°C io V = V = V /2 (1) 1 9 icm out CC I Input offset current io T ≤ T ≤ T 25 min amb max nA V = V = V /2 (1) 10 50 icm out CC I Input bias current ib T ≤ T ≤ T 85 min amb max CMR Common mode rejection ratio 0 ≤ V ≤ V 55 85 icm CC SVR Supply voltage rejection ratio V = V /2 70 80 icm CC dB V = 0.5 V to 2.2 V, R = 10 kΩ 80 100 out L A Large signal voltage gain vd V = 0.5 V to 2.2 V, R = 2 kΩ 70 88 out L V = 100 mV, T ≤ T ≤ T , id min amb max 2.6 2.65 RL = 10 kΩ V High level output voltage V OH V = 100 mV, T ≤ T ≤ T , id min amb max 2.55 2.6 RL = 2 kΩ V = -100 mV, T ≤ T ≤ T , id min amb max 15 90 RL = 10 kΩ V Low level output voltage mV OL V = -100 mV, T ≤ T ≤ T , id min amb max 50 100 RL = 2 kΩ Output source current, 5 46 Vid = 100 mV, VO = VDD I Output current mA o Output sink current, 5 46 Vid = -100 mV, VO = VCC V = V /2, A = 1, no load 145 200 out CC VCL I Supply current (per amplifier) µA CC T ≤ T ≤ T 230 min amb max R = 10 kΩ, C = 100 pF, GBP Gain bandwidth product L L 1 MHz f = 100 kHz SR Slew rate R = 600 Ω, C = 100 pF, A = 1 0.35 V/µs L L V ɸm Phase margin R = 600 Ω, C = 100 pF 44 Degrees L L en Input voltage noise 40 nV/√ Hz THD Total harmonic distortion 0.01 % Notes: (1)Maximum values include unavoidable inaccuracies of the industrial tests. DocID11887 Rev 8 5/17

Electrical characteristics LMV321, LMV358, LMV324 Table 4: Electrical characteristics at VCC = 5 V, VDD = 0 V, CL and RL connected to VCC/2, Tamb = 25 °C (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. Unit V = V = V /2 0.1 3 icm out CC V Input offset voltage mV io T ≤ T ≤ T 6 min amb max ΔV /ΔT Input offset voltage drift 2 µV/°C io V = V = V /2 (1) 1 9 icm out CC I Input offset current io T ≤ T ≤ T 25 min amb max nA V = V = V /2 (1) 16 63 icm out CC I Input bias current ib T ≤ T ≤ T 95 min amb max CMR Common mode rejection ratio 0 ≤ V ≤ V 65 95 icm CC SVR Supply voltage rejection ratio V = V /2 70 90 icm CC dB V = 0.5 V to 4.5 V, R = 10 kΩ 85 97 out L A Large signal voltage gain vd V = 0.5 V to 4.5 V, R = 2 kΩ 77 93 out L V = 100 mV, T ≤ T ≤ T , id min amb max 4.85 4.95 RL = 10 kΩ V High level output voltage V OH V = 100 mV, T ≤ T ≤ T , id min amb max 4.8 4.91 RL = 2 kΩ V = -100 mV, T ≤ T ≤ T , id min amb max 40 180 RL = 10 kΩ V Low level output voltage mV OL V = -100 mV, T ≤ T ≤ T , id min amb max 80 200 RL = 2 kΩ Output source current, 7 48 Vid = 100 mV, VO = VDD I Output current mA o Output sink current, 7 48 Vid = -100 mV, VO = VCC V = V /2, A = 1, no load 162 220 out CC VCL I Supply current (per amplifier) µA CC T ≤ T ≤ T 250 min amb max R = 10 kΩ, C = 100 pF, GBP Gain bandwidth product L L 1.3 MHz f = 100 kHz SR Slew rate R = 600 Ω, C = 100 pF, A = 1 0.45 V/µs L L V ɸm Phase margin R = 600 Ω, C = 100 pF 48 Degrees L L en Input voltage noise 40 nV/√ Hz THD Total harmonic distortion 0.01 % Notes: (1)Maximum values include unavoidable inaccuracies of the industrial tests. 6/17 DocID11887 Rev 8

LMV321, LMV358, LMV324 Electrical characteristics Figure 1: Supply current/amplifier vs. supply voltage Figure 2: Input bias current vs. temperature (VCC = 3 V, Vicm = 1.5 V) Figure 3: Input bias current vs. temperature Figure 4: Common mode rejection vs. temperature (VCC = 5 V, Vicm = 2.5 V) (VCC = 3 V) Figure 5: Common mode rejection vs. temperature Figure 6: Supply voltage rejection vs. temperature (VCC = 5 V) (VCC = 5 V, Vicm = 2.5 V) DocID11887 Rev 8 7/17

Electrical characteristics LMV321, LMV358, LMV324 Figure 7: Open loop gain vs. temperature Figure 8: Open loop gain vs. temperature (VCC = 3 V, RL = 10/2 kW) (VCC = 5 V, RL = 10/2 kW) Figure 9: Supply voltage rejection vs. temperature Figure 10: Output current vs. output voltage (VCC = 3 V, Vicm = 1.5 V) (VCC = 3 V, Vid = 0.1 V, Vicm = 1.5 V) Figure 11: Output current vs. output voltage Figure 12: Noise versus frequency (VCC = 5 V, Vid = 0.1 V, Vicm = 2.5 V) 6600 Sink T=25°C T=-40°C 4400 T=125°C A) m 2200 ( nt e Vcc=5V urr 00 Vid=0.1V C Vicm=2.5V ut utp--2200 T=125°C O T=25°C --4400 T=-40°C Source --6600 00 11 22 33 44 55 OutputVoltage(V) 8/17 DocID11887 Rev 8

LMV321, LMV358, LMV324 Package information 3 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. DocID11887 Rev 8 9/17

Package information LMV321, LMV358, LMV324 3.1 SOT23-5 package information Figure 13: SOT23-5 package outline Table 5: SOT23-5 mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 0.90 1.20 1.45 0.035 0.047 0.057 A1 0.15 0.006 A2 0.90 1.05 1.30 0.035 0.041 0.051 B 0.35 0.40 0.50 0.014 0.016 0.020 C 0.09 0.15 0.20 0.004 0.006 0.008 D 2.80 2.90 3.00 0.110 0.114 0.118 D1 1.90 0.075 e 0.95 0.037 E 2.60 2.80 3.00 0.102 0.110 0.118 F 1.50 1.60 1.75 0.059 0.063 0.069 L 0.10 0.35 0.60 0.004 0.014 0.024 K 0 degrees 10 degrees 0 degrees 10 degrees 10/17 DocID11887 Rev 8

LMV321, LMV358, LMV324 Package information 3.2 SO8 package information Figure 14: SO8 package outline Table 6: SO8 mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 1.75 0.069 A1 0.10 0.25 0.004 0.010 A2 1.25 0.049 b 0.28 0.48 0.011 0.019 c 0.17 0.23 0.007 0.010 D 4.80 4.90 5.00 0.189 0.193 0.197 E 5.80 6.00 6.20 0.228 0.236 0.244 E1 3.80 3.90 4.00 0.150 0.154 0.157 e 1.27 0.050 h 0.25 0.50 0.010 0.020 L 0.40 1.27 0.016 0.050 L1 1.04 0.040 k 1° 8° 1° 8° ccc 0.10 0.004 DocID11887 Rev 8 11/17

Package information LMV321, LMV358, LMV324 3.3 TSSOP8 package information Figure 15: TSSOP8 package outline Table 7: TSSOP8 mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 1.2 0.047 A1 0.05 0.15 0.002 0.006 A2 0.80 1.00 1.05 0.031 0.039 0.041 b 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.008 D 2.90 3.00 3.10 0.114 0.118 0.122 E 6.20 6.40 6.60 0.244 0.252 0.260 E1 4.30 4.40 4.50 0.169 0.173 0.177 e 0.65 0.0256 k 0° 8° 0° 8° L 0.45 0.60 0.75 0.018 0.024 0.030 L1 1 0.039 aaa 0.1 0.004 12/17 DocID11887 Rev 8

LMV321, LMV358, LMV324 Package information 3.4 SO14 package information Figure 16: SO14 package outline Table 8: SO14 mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 1.35 1.75 0.05 0.068 A1 0.10 0.25 0.004 0.009 A2 1.10 1.65 0.04 0.06 B 0.33 0.51 0.01 0.02 C 0.19 0.25 0.007 0.009 D 8.55 8.75 0.33 0.34 E 3.80 4.0 0.15 0.15 e 1.27 0.05 H 5.80 6.20 0.22 0.24 h 0.25 0.50 0.009 0.02 L 0.40 1.27 0.015 0.05 k 8° (max) ddd 0.10 0.004 DocID11887 Rev 8 13/17

Package information LMV321, LMV358, LMV324 3.5 TSSOP14 package information Figure 17: TSSOP14 package outline Table 9: TSSOP14 mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 1.20 0.047 A1 0.05 0.15 0.002 0.004 0.006 A2 0.80 1.00 1.05 0.031 0.039 0.041 b 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.0089 D 4.90 5.00 5.10 0.193 0.197 0.201 E 6.20 6.40 6.60 0.244 0.252 0.260 E1 4.30 4.40 4.50 0.169 0.173 0.176 e 0.65 0.0256 L 0.45 0.60 0.75 0.018 0.024 0.030 L1 1.00 0.039 k 0° 8° 0° 8° aaa 0.10 0.004 14/17 DocID11887 Rev 8

LMV321, LMV358, LMV324 Ordering information 4 Ordering information Table 10: Order codes Order code Temperature range Package Packaging Marking LMV321ILT K177 SOT23-5 LMV321RILT K176 Tape and reel LMV321IYLT (1) K180 SOT23-5 (automotive grade) LMV321RIYLT (1) K185 LMV358IDT SO8 LMV358 Tube or tape and reel LMV358IYDT (1) SO8 (automotive grade) LMV358IY LMV358IPT -40 °C to 125 °C TSSOP8 MV358 Tape and reel LMV358IYPT (1) TSSOP8 (automotive grade) K181Y LMV324IDT SO14 LMV324 Tube or tape and reel LMV324IYDT (1) SO14 (automotive grade) V324Y LMV324IPT TSSOP14 MV324 TSSOP14 (automotive Tape and reel LMV324IYPT (1) V324IY grade) Notes: (1)Qualified and characterized according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 and Q 002 or equivalent. DocID11887 Rev 8 15/17

Revision history LMV321, LMV358, LMV324 5 Revision history Table 11: Document revision history Date Revision Changes 1-Dec-2005 1 First release - Products in full production. Added automotive grade part numbers to order codes table. 25-May-2007 2 Moved order codes table to Section 4: “Ordering information”. Added Figure 12: “Noise versus frequency”. Updated presentation of package information. 20-Feb-2008 3 Corrected footnote for automotive grade part numbers in order codes table. Updated document format. 18-Jan-2010 4 Updated packages in Section 3: “Package information”. Modified Note 1 and added Note 2 under Table 10: “Order codes”. Updated Features (added SO8, TSSOP8, SO14, and TSSOP14 package). Updated titles of Figure 2 to Figure 11 (added conditions). 05-Nov-2012 5 Updated LMV321RIYLT order code in Table 10: “Order codes” (status qualified), removed LMV358IYD and LMV324IYD order codes from Table 10: “Order codes”. Minor corrections throughout document. Updated Features Added Related products Table 3 and Table 4: replaced ΔV with ΔV /ΔT 16-Aug-2013 6 io io Table 6: updated minimum inches “k” value (0 instead of 1) Table 10: “Order codes”: updated footnote associated with order code LMV358IYPT Updated Figure 11 TSSOP package information: updated "aaa" value 05-Jun-2015 7 Table 10: “Order codes”: removed obsolete order codes LMV358ID and LMV324ID. 15-Oct-2015 8 Replaced Figure 12: "Noise versus frequency" 16/17 DocID11887 Rev 8

LMV321, LMV358, LMV324 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2015 STMicroelectronics – All rights reserved DocID11887 Rev 8 17/17

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S TMicroelectronics: LMV321ILT LMV321RILT LMV324IDT LMV324IPT LMV358IDT LMV358IPT LMV324ID LMV358ID LMV321RIYLT LMV321IYLT LMV324IYDT LMV358IYDT LMV324IYPT LMV358IYPT