LM139, LM239, LM339 Low-power quad voltage comparators Datasheet - production data Features • Wide single supply voltage range or dual supplies for all devices: +2 to +36 V or ±1 V to ±18 V D • Very low supply current (1.1 mA) independent SO14 of supply voltage (plastic micropackage) • Low input bias current: 25 nA typ • Low input offset current: ±5 nA typ • Low input offset voltage: ±1 mV typ • Input common-mode voltage range includes ground P TSSOP14 • Low output saturation voltage: 250 mV typ; (thin shrink small outline package) (ISINK = 4 mA) • Differential input voltage range equal to the supply voltage • TTL, DTL, ECL, MOS, CMOS compatible outputs Q Description QFN16 3x3 (plastic micropackage) This family of devices consists of four independent precision-voltage comparators with an offset voltage specification as low as 2 mV maximum for LM339A, LM239A, and LM139A. Each comparator has been designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible. These comparators also have a unique characteristic in that the input common mode voltage range includes ground even though operated from a single power supply voltage. August 2014 DocID2159 Rev 4 1/19 This is information on a product in full production. www.st.com

Contents LM139, LM239, LM339 Contents 1 Pin and schematic diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Absolute maximum ratings and operating conditions . . . . . . . . . . . . . 4 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 Electrical characteristics curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 5 Typical applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 6 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 6.1 SO14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 6.2 TSSOP14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 6.3 QFN16 3x3 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 7 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 8 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2/19 DocID2159 Rev 4

LM139, LM239, LM339 Pin and schematic diagram 1 Pin and schematic diagram Figure 1. Pin connections (top view) Output2 1 14 Output3 Output1 2 13 Output4 VCC+ 3 12 VCC- Invertinginput1 4 11 Non-invertinginput4 Non-invertinginput1 5 10 Invertinginput4 Invertinginput2 6 9 Non-invertinginput3 Non-invertinginput2 7 8 Invertinginput3 Figure 2. Schematic diagram (1/4 LM139) V CC 3.5μA 100 μA 3.5μA 100μA Non-inverting input V O Inverting input V CC DocID2159 Rev 4 3/19 19

Absolute maximum ratings and operating conditions LM139, LM239, LM339 2 Absolute maximum ratings and operating conditions Table 1. Absolute maximum ratings Symbol Parameter Value Unit V Supply voltage ±18 or 36 V CC V Differential input voltage ±36 V ID V Input voltage -0.3 to +36 V IN Output short-circuit to ground(1) Infinite Thermal resistance junction to ambient(2) SO14 105 R °C/W thja TSSOP14 100 QFN16 3x3 45 Thermal resistance junction to case(2) SO14 31 R °C/W thjc TSSOP14 32 QFN16 3x3 14 T Storage temperature range -65 to +150 °C stg T Junction temperature +150 °C j T Lead temperature (soldering 10 seconds) 260 °C LEAD Human body model (HBM)(3) 500 ESD Machine model (MM)(4) 100 V Charged device model (CDM)(5) 1500 1. Short-circuits from the output to V + can cause excessive heating and eventual destruction. The maximum output current is approxCimCately 20 mA independent of the magnitude of V +. CC 2. Short-circuits can cause excessive heating. These values are typical. 3. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a 1.5 kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations while the other pins are floating. 4. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of connected pin combinations while the other pins are floating. 5. Charged device model: all pins and the package are charged together to the specified voltage and then discharged directly to the ground through only one pin. This is done for all pins. 4/19 DocID2159 Rev 4

LM139, LM239, LM339 Absolute maximum ratings and operating conditions Table 2. Operating conditions (T = 25 °C) amb Symbol Parameter Value Unit 2 to 32 V Supply voltage V CC ±1 to ±16 V Common mode input voltage range 0 to (V + - 1.5) V ICM CC Operating free-air temperature range – LM139, LM139A -55, +125 T °C oper – LM239, LM239A -40, +105 – LM339, LM339A 0, +70 DocID2159 Rev 4 5/19 19

Electrical characteristics LM139, LM239, LM339 3 Electrical characteristics T a ble 3. Electrical characteristics at V + = +5 V, V - = GND, T = +25 °C CC CC amb (unless otherwise specified) LM139A - LM239A LM139 - LM239 LM339A LM339 Symbol Parameter Unit Min. Typ. Max. Min Typ. Max. Input offset voltage(1) 1 2 1 5 mV V IO T ≤ T ≤ T 4 9 min amb max Input offset current 3 25 5 50 nA I IO T ≤ T ≤ T 100 150 min amb max Input bias current (I+ or I-)(2) 25 100 25 250 nA I IB T ≤ T ≤ T 300 400 min amb max Large signal voltage gain A VD V = 15 V, R = 15 kΩ, V = 1 V to 11 V 50 200 50 200 V/mV CC L o Supply current (all comparators) ICC VCC = +5 V, no load 1.1 2 1.1 2 mA V = +30 V, no load 1.3 2.5 1.3 2.5 CC Input common mode voltage range(3) VICM VCC = 30 V 0 VCC+ -1.5 0 VCC+ -1.5 V Tmin ≤ Tamb ≤ Tmax 0 VCC+ -2 0 VCC+ -2 V Differential input voltage (4) V + V + V ID CC CC Low level output voltage VOL VID = -1 V, ISINK = 4 mA 250 400 250 400 mV T ≤ T ≤ T 700 700 min amb max High level output current IOH VCC = Vo = 30 V, VID = 1 V 0.1 0.1 nA T ≤ T ≤ T 1 1 μA min amb max Output sink current I SINK V = 1 V, V = 1.5 V 6 16 6 16 mA ID o Response time (5) t re R = 5.1 kΩ connected to V + 1.3 1.3 μs L CC 6/19 DocID2159 Rev 4

LM139, LM239, LM339 Electrical characteristics Table 3. Electrical characteristics at V + = +5 V, V - = GND, T = +25 °C CC CC amb (unless otherwise specified) (continued) LM139A - LM239A LM139 - LM239 LM339A LM339 Symbol Parameter Unit Min. Typ. Max. Min Typ. Max. Large signal response time trel R = 5.1 kΩ connected to V +, e = TTL, L CC l V = +1.4 V 300 300 ns (ref) 1. At output switch point, V ≈ 1.4 V, V + from 5 V to 30 V, and over the full common-mode range (0 V to V + -1.5 V). o CC CC 2. The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of the state of the output, so no loading charge exists on the reference of input lines. 3. The input common-mode voltage of either input signal voltage should not be allowed to go negative by more than 0.3 V. The upper end of the common-mode voltage range is V + -1.5 V, but either or both inputs can go to +30 V without CC damage. 4. Positive excursions of input voltage may exceed the power supply level. As long as the other voltage remains within the common-mode range, the comparator will provide a proper output state. The low input voltage state must not be less than -0.3 V (or 0.3 V below the negative power supply, if used). 5. The response time specified is for a 100 mV input step with 5 mV overdrive. For larger overdrive signals, 300 ns can be obtained. DocID2159 Rev 4 7/19 19

Electrical characteristics curves LM139, LM239, LM339 4 Electrical characteristics curves Figure 3. Supply current vs. supply voltage Figure 4. Input current vs. supply voltage 1 80 (mA) 0.8 TamTba=mb-5=5°0C°C nA) 60 RVii==01V09Ω Tamb=-55°C T ( REN 0.6 Tamb=+25°C ENT Tamb=0°C UR Tamb=+70°C RR 40 Tamb=+25°C YC 0.4 CU PL Tamb=+125°C UT 20 UP 0.2 NP Tamb=+125°C S R = I Tamb=+70°C 0 10 20 30 40 0 10 20 30 40 SUPPLYVOLTAGE(V) SUPPLYVOLTAGE(V) Figure 5. Output saturation voltage vs. output Figure 6. Response time for various input current overdrives - negative transition 101 6 VOLTAGE(V) 1100-01 Tamb=+OO12uu5tt°ooCffssaattuurraattiioonn OLTAGE(mV) VOLTAGE(V) 54321 2100m0mIVnVputoverdrive:5mV eI 5V e5o.1kΩ N V T TURATIO 10-2 Tamb=+2T5a°mCb=-55°C INPUT OUTPU -1-050000 Tamb=+25°C A S 10-3 10-2 10-1 100 101 102 0 0.5 1 1.5 2 TIME(μs) OUTPUTSINKCURRENT(mA) Figure 7. Response time for various input overdrives - positive transition 6 V) V)1 5 Inputoverdrive:100mV m ( GE( AGE 43 5mV TA OLT 2 OL V 1 20mV V T 5V INPUT OUTPU 50000 Tamb=+25°C eI 5e.o1kΩ 0 0 0.5 1 1.5 2 TIME(μs) 8/19 DocID2159 Rev 4

LM139, LM239, LM339 Typical applications 5 Typical applications Figure 8. Basic comparator Figure 9. Driving CMOS 5 V V = 5 V CC 15 kΩ 100 kΩ +V +V (ref) (ref) 1/4 & 1/4 LM139 V LM139 O -V -V (ref) (ref) Figure 10. Driving TTL Figure 11. Low frequency op amp 5 V 5 V 15 kΩ 10 kΩ 1/4 LM139 +V (ref) ~ e 1/4 & l e o LM139 -V 100 kΩ 0.5 μF (ref) 1 kΩ & A = 100 V Figure 12. Low frequency op amp Figure 13. Transducer amplifier 5 V 5 V (e = 0 V for e = 0 V) o l 15 kΩ Magnetic pick-up 10 kΩ 3 kΩ 1/4 LM139 2N 2222 1/4 ~ el 0.5 μF LM139 eo 20 MΩ 100 kΩ 1 kΩ eo 10 kΩ A = 100 V DocID2159 Rev 4 9/19 19

Typical applications LM139, LM239, LM339 Figure 14. Time delay generator VCC=+15V 10 kΩ 15 kΩ 200 kΩ 3 kΩ 10 MΩ 10 kΩ V3 LM1/1439 V03 VCtoC t3 3kΩ 10 kΩ 51 kΩ 10 MΩ VCC L1M/4139 VC1 10 kΩ 0to tA V(ref.) V2 LM1/1439 VO2 VtCoC t2 Input gating signal 0.001μF 3 kΩ VCC 10 MΩ 51 kΩ 10 kΩ 1/4 VC1VVV123 V1 LM139 VO1 VCCt0 t1 0t0t1t2 t3 t4 t 51 kΩ Figure 15. Low frequency op amp with offset Figure 16. Zero crossing detector adjust (single power supply) 5 V 5 V Offset adjust 100 kΩ 5 V 100 kΩ 100 kΩ 5.1 kΩ RS R2 R1 1 MΩ 1 MΩ15 kΩ e 5.1 kΩ 5.1 kΩ l e ~ L1M/1439 2N 2222 L1M/1439 l 0.5μF 1N4148 R1 100 kΩ 1 kΩ 20 MΩ e 10 kΩ o Figure 17. Two-decade high-frequency VCO VCC 100 kΩ VCC 100 kΩ 500 pF 3 kΩ 3 kΩ FrevqouVlteacngoceny ti rncopolunttrol 0.1 μF LM1/1439 05.0.11 kμΩF L1M/1439 Output 1 20 kΩ VCC/2 Output 2 50 kΩ 20 kΩ 1/4 VCC/2 LM139 VCC=+30V +250 mV Vcontrol +50 V 700 Hz fo 100 kHz 10/19 DocID2159 Rev 4

LM139, LM239, LM339 Typical applications Figure 18. Limit comparator Figure 19. Crystal-controlled oscillator V (12 V) V = 15 V CC CC 2R 10 kΩ 200 kΩ 2 kΩ S V 100 kΩ (ref) high 1/4 LM139 V Lamp CC RS 0.1 μF L1M/1439 eo 0 e ~ I f = 100 kHz 1/4 2R LM139 2N2222 200 kΩ S V (ref) low Figure 20. Zero crossing detector Figure 21. Comparator with a negative reference 15 V 15 V 5.1 kΩ 5.1 kΩ 1/4 e 1/4 e LM139 o LM139 o e ~ e ~ I I 5 V 15 V 15 V DocID2159 Rev 4 11/19 19

Package information LM139, LM239, LM339 6 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 12/19 DocID2159 Rev 4

LM139, LM239, LM339 Package information 6.1 SO14 package information Figure 22. SO14 package mechanical drawing Table 4. SO14 package mechanical data Dimensions Millimeters Inches Ref. Min. Typ. Max. Min. Typ. Max. A 1.35 1.75 0.05 0.068 A1 0.10 0.25 0.004 0.009 A2 1.10 1.65 0.04 0.06 B 0.33 0.51 0.01 0.02 C 0.19 0.25 0.007 0.009 D 8.55 8.75 0.33 0.34 E 3.80 4.0 0.15 0.15 e 1.27 0.05 H 5.80 6.20 0.22 0.24 h 0.25 0.50 0.009 0.02 L 0.40 1.27 0.015 0.05 k 8° (max.) ddd 0.10 0.004 DocID2159 Rev 4 13/19 19

Package information LM139, LM239, LM339 6.2 TSSOP14 package information Figure 23. TSSOP14 package mechanical drawing Table 5. TSSOP14 package mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 1.20 0.047 A1 0.05 0.15 0.002 0.004 0.006 A2 0.80 1.00 1.05 0.031 0.039 0.041 b 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.0089 D 4.90 5.00 5.10 0.193 0.197 0.201 E 6.20 6.40 6.60 0.244 0.252 0.260 E1 4.30 4.40 4.50 0.169 0.173 0.176 e 0.65 0.0256 L 0.45 0.60 0.75 0.018 0.024 0.030 L1 1.00 0.039 k 0° 8° 0° 8° aaa 0.10 0.004 14/19 DocID2159 Rev 4

LM139, LM239, LM339 Package information 6.3 QFN16 3x3 package information Figure 24. QFN16 3x3 package mechanical drawing DocID2159 Rev 4 15/19 19

Package information LM139, LM239, LM339 Table 6. QFN16 3x3 mm package mechanical data (pitch 0.5 mm) Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 0.80 0.90 1.00 0.031 0.035 0.039 A1 0 0.05 0 0.002 A3 0.20 0.008 b 0.18 0.30 0.007 0.012 D 2.90 3.00 3.10 0.114 0.118 0.122 D2 1.50 1.80 0.059 0.071 E 2.90 3.00 3.10 0.114 0.118 0.122 E2 1.50 1.80 0.059 0.071 e 0.50 0.020 L 0.30 0.50 0.012 0.020 Figure 25. QFN16 3x3 footprint recommendation 16/19 DocID2159 Rev 4

LM139, LM239, LM339 Ordering information 7 Ordering information Table 7. Order codes Temperature Part number Package Packing Marking range LM139DT 139 SO14 LM139ADT 139A -55 °C, +125 °C LM139PT 139 TSSOP14 LM139APT 139A LM239DT 239 SO14 LM239ADT 239A LM239PT -40 °C, +105 °C 239 TSSOP14 Tape and reel LM239APT 239A LM239QT QFN16 3x3 K550 LM339DT 339 SO14 LM339ADT 339A LM339PT 0 °C, +70 °C 339 TSSOP14 LM339APT 339A LM339QT QFN16 3x3 K551 DocID2159 Rev 4 17/19 19

Revision history LM139, LM239, LM339 8 Revision history Table 8. Document revision history Date Revision Changes 01-Mar-2003 1 Initial release. Updated document format. Removed power dissipation from Table 1: Absolute maximum ratings. 28-Apr-2009 2 Added R , R ESD and T valuesto Table 1. THJA THJC, LEAD Updated package information in Chapter 6. Added Table 7: Order codes. Added pin connections for QFN16 package in Figure 1 on page 3. Added thermal information for QFN16 package in Table 1 on page 4. 13-Jul-2011 3 Added QFN16 package information in Chapter 6. Added order codes for QFN16 package in Table 7: Order codes. Removed DIP14 package Table 7: Order codes: replaced the marking of the order code 18-Aug-2014 4 LM239QT from K549 to K550; removed all order codes with “tube” packing. Updated disclaimer 18/19 DocID2159 Rev 4

LM139, LM239, LM339 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2014 STMicroelectronics – All rights reserved DocID2159 Rev 4 19/19 19

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S TMicroelectronics: LM239AD LM239AN LM239D LM339AD LM339AN LM339N LM339D LM239ADT LM239APT LM239DT LM339PT LM239N LM139AD LM239PT LM339DT LM339ADT LM339APT LM339EAD LM139DT LM139APT LM339QT LM239QT LM139ADT