LM Series LM Series This is suitable for use in water, industrial wastewater and sewage, that can have wide Part Numbering System variations of temperature. This small design of switch is for use in more confined spaces, where there is not enough room for the larger FFSMC type. LM 10 A U 10 The rounded body design and floating attitude prevents accumulation of solids on the body. Series Cable length in mtrs: The switch has additional internal ballast, to bring the centre of gravity and rotation close to the Max. current Blank = 5M standard cable entry point. Cable covering: Contact Form The switching element is a self cleaning type, that makes the complete switch insensitive to Blank = PVC A = n/o humidity and condensation, allowing this type to operate in widely fluctuating temperatures. The U = Polyurethane B = n/c switch contacts are rated at 10 Amp resistive. N = Neoprene C = c/o S = Silicone Supplied, as standard, with 5 metres cable and adjustable counterweight. Installation Technical Specifications LM10A LM10B LM10C Contact Form N/O N/C C/O cable entrance cable Material High Density Polyethylene Temp Range °C 0 / +55 °F + 32 / +131 • For smaller tanks and Cable (standard length 5m) With protective earth no earth restricted space Standard cable covering PVC differential U cable option for Fuel oils Polyurethane • Use in sewer and Max. working pressure 10 bar external industrial waste tie Electrical Specifications water counterweight Power Rating Max AC : 750 VA DC : 180W Switching Voltage Max AC : 250 V DC : 110 V • Shape avoids Switching Current Max. Resistive 10 A “ragging”, in sewer Switching Current Max. Inductive AC : 4A DC : 1 A systems pipe It is necessary to use an auxiliary relay, when switching pump motors or any loads that are not purely resistive. • Unaffected by MECHANICAL suspended solids wiring diagram wiring diagram for filling pump for emptying pump • Operates in Turbulent 47 Fluids brown brown 15° blue black Off - On brown brown Differential Cynergy3 Components Ltd On - Off 7 Cobham Road 129 15° Ferndown Industrial Estate blue black Wimborne pump - off pump - on Dorset BH21 7PE Tel: +44 (0) 1202 897969 Minimum Cable Pivot level drop level drop 75 length 120mm sales@cynergy3.com pump - off pump - on ISO 9001CERTIFIED www.cynergy3.com © 2011 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited. ISO 9001CERTIFIED www.cynergy3.com © 2011 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.

LM Series LM Series This is suitable for use in water, industrial wastewater and sewage, that can have wide Part Numbering System variations of temperature. This small design of switch is for use in more confined spaces, where there is not enough room for the larger FFSMC type. LM 10 A U 10 The rounded body design and floating attitude prevents accumulation of solids on the body. Series Cable length in mtrs: The switch has additional internal ballast, to bring the centre of gravity and rotation close to the Max. current Blank = 5M standard cable entry point. Cable covering: Contact Form The switching element is a self cleaning type, that makes the complete switch insensitive to Blank = PVC A = n/o humidity and condensation, allowing this type to operate in widely fluctuating temperatures. The U = Polyurethane B = n/c switch contacts are rated at 10 Amp resistive. N = Neoprene C = c/o S = Silicone Supplied, as standard, with 5 metres cable and adjustable counterweight. Installation Technical Specifications LM10A LM10B LM10C Contact Form N/O N/C C/O cable entrance cable Material High Density Polyethylene Temp Range °C 0 / +55 °F + 32 / +131 • For smaller tanks and Cable (standard length 5m) With protective earth no earth restricted space Standard cable covering PVC differential U cable option for Fuel oils Polyurethane • Use in sewer and Max. working pressure 10 bar external industrial waste tie Electrical Specifications water counterweight Power Rating Max AC : 750 VA DC : 180W Switching Voltage Max AC : 250 V DC : 110 V • Shape avoids Switching Current Max. Resistive 10 A “ragging”, in sewer Switching Current Max. Inductive AC : 4A DC : 1 A systems pipe It is necessary to use an auxiliary relay, when switching pump motors or any loads that are not purely resistive. • Unaffected by MECHANICAL suspended solids wiring diagram wiring diagram for filling pump for emptying pump • Operates in Turbulent 47 Fluids brown brown 15° blue black Off - On brown brown Differential Cynergy3 Components Ltd On - Off 7 Cobham Road 129 15° Ferndown Industrial Estate blue black Wimborne pump - off pump - on Dorset BH21 7PE Tel: +44 (0) 1202 897969 Minimum Cable Pivot level drop level drop 75 length 120mm sales@cynergy3.com pump - off pump - on ISO 9001CERTIFIED www.cynergy3.com © 2011 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited. ISO 9001CERTIFIED www.cynergy3.com © 2011 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.