LED-25W Series Fixed Output and Dimmable Switch Mode LED Drivers Rev 11-16-2017 Electrical Specifi cations Input Voltage Range: 100-277 Vac Nom. (90-305 V Min/Max) Can endure 320Vac for 48 Hrs, 350Vac for Input Over-Voltage: 2 Hrs Frequency: 50/60 Hz Nom. (47-63 Hz Min/Max) Power Factor: >0.90 @ full load, 100V through 277V < 12A @120Vac, 50% Duration < 750 mSec Inrush Current: < 15A @277Vac, 50% Duration < 750 mSec Input Current (Max): 0.25 Amps max @ 120 Vac Maximum Power: 25W Current Accuracy: ± 1% Over input line variation Load Regulation: ± 3% THD: < 20% @ full load Turn-On Delay: <1.0 Sec. @ full output; 1-4 Sec. @ full dim Leakage Current: 400 µA Typical Hold Up Time: Half Cycle Protections Over-voltage Output Over-current Output Short Circuit Auto Recovery Constant Current Models Environmental Specifi cations Current Out Voltage Out Max Power Typical Model (mA ±3%) Range (Vdc) (W) Effi ciency Max Case Life Temp: (5 year warranty) 72˚C LED25W-72-C0350-XX 350 24-72 25 86% LED25W-40-C0350-XX 350 13-40 14 84% Maximum Case Temp (UL): 90˚C LED25W-28-C0350-XX 350 10-28 9.8 83% Minimum Starting Temp: -30ºC LED25W-62-C0400-XX 400 21-62 24.8 85% Storage Temperature: -40˚C to +85˚C LED25W-56-C0450-XX 450 19-56 25 84% Humidity: 5% to 95% LED25W-40-C0500-XX 500 13-40 20 84% Cooling: Convection LED25W-40-C0620-XX 620 13-40 24.8 84% Vibration Frequency: 5 to 55 Hz/2g, 30 minutes LED25W-36-C0700-XX 700 12-36 25 84% LED25W-28-C0850-XX 850 10-28 23.8 83% Sound Rating: Class A LED25W-24-C1040-XX 1040 8-24 25 83% 482,000 Hours at full load and 40ºC ambi- MTBF: LED25W-20-C1250-XX 1250 7-20 25 83% ent conditions per MIL-217F Notice 2 LED25W-18-C1400-XX 1400 6-18 25 82% EMC: FCC 47CFR Part 15 Class B compliant LED25W-16-C1560-XX 1560 6-16 25 82% LED25W-14-C1750-XX 1750 5-14 24.5 82% • Total Power: 25 Watts LED25W-12-C2080-XX 2080 4-12 25 81% • Input Voltage: 100-277 Vac Nom. -XX indicates dimming options are available. See options at left. Blank = fi xed current output • UL Dry & Damp Location Rated Constant Voltage Models • High Power Factor Voltage Out Current Out Max Power Typical • UL8750 and Class 2 Compliant, as noted Model (Vdc ±5%) Range (mA) (W) Effi ciency • Constant Current & Constant Voltage with Isolation LED25W-12• 12 520-2080 25 81% • Black Magic Thermal Advantage™ Plastic Housing LED25W-14 14 438-1750 24.5 82% • UL Sign Components Manual (S.A.M. Models) LED25W-16 16 390-1560 25 82% LED25W-18 18 360-1400 25 82% LED25W-20 20 313-1250 25 83% Dimming Option: LED25W-24 • 24 260-1040 25 83% 0-10V & Resistance dimmable models include an extra two wires +Purple/-Gray on the out- LED25W-28 28 213-850 23.8 83% put side. “-D” Compatible with most quality 0-10V wall dimmers. See page 3 for additional specifi cations. LED25W-36 36 175-700 25 84% LED25W-40 40 155-620 24.8 84% Note: LED25W-56 56 113-450 25 84% LED drivers are designed and intended to operate LED loads only. Non-LED loading may be LED25W-62 62 100-400 24.8 85% outside the specifi ed design limits of our LED drivers, and therefore cannot be covered by any warranty. If you desire to use our LED drivers to operate non-LED loads please contact us to LED25W-72 72 88-350 25 86% discuss compatibility. • Indicates S.A.M. Class 2: US/Canada Hubbell Lighting Components • 1225 Bowes Rd • Elgin, IL 60123 T 847-515-3057 • F 847-515-3047 • hubbelllightingcomponents.com Pg 1 of 2 Copyright © 2018 Hubbell Lighting Components, a division of Hubbell Lighting, Inc. All rights reserved.

LED-25W Series Fixed Output and Dimmable Switch Mode LED Drivers Dimensions IN [mm] Dimming Purple (+) Gray (-) Output Red (+) Blue (-) Tc = 90°C max Input White (N) Black (L) WIRE SPECS: Input Leads: 18 AWG, rated 600 V, 105C, min. Output Leads: 18 AWG, rated 300 V, 105C, min. Dimming Leads: 22 AWG, rated 300 V, 105C. All wires are stranded with solder dipped ends. Power Characteristics Power Factor / Load THD / Load Typical Efficiency / Load 1.00 20% 100% 0.90 18% 120Vac 0.80 16% 95% 277Vac y 0.70 120Vac 14% 120Vac nc90% PF00..5600 277Vac THD1102%% 277Vac Efficie85% 0.40 8% 80% 0.30 6% 0.20 4% 75% 0.10 2% 70% 0.00 0% 60% 70% 80% 90% 100% 50% 60% 70% 80% 90% 100% 50% 60% 70% 80% 90% 100% Load Lifetime / CaLsoea dTemperature Load 130 Safety Cert. Standard 115 Hrs) 90 UCSLA/CUL U22L.82750 k e( 75 CE EN61347 m eti 60 EMC Standard Notes Lif 45 EN61000-3-2 EN61000-3-3 Class C 30 FCC, 47CFR Part 15 Class B 15 EN6100-4-5 2KV L-N, 8/20 µsec Surge Protection 0 45 50 55 60 65 70 75 80 85 90 Case Hotspot Temperature (°C) Note: The area under the life-temperature curve represents where the driver has highly reliable operation within specifi cation. Driver performance may drift UL Conditions of Acceptability out of published specifi cations as the hours of operation exceed the curve at a given temperature. Higher operating temperatures increase the chances of a failure to function. Other electrical, mechanical and environmental factors affect driver lifetime but are not represented in this calculation. See website for additional information Hubbell Lighting Components • 1225 Bowes Rd • Elgin, IL 60123 T 847-515-3057 • F 847-515-3047 • hubbelllightingcomponents.com Pg 2 of 2 Copyright © 2018 Hubbell Lighting Components, a division of Hubbell Lighting, Inc. All rights reserved.

LED-25W Series Fixed Output and Dimmable Switch Mode LED Drivers “-D” Option: 0-10VDC and Resistance Dimming Parameters Minimum Typical Maximum Source Current out of 0-10V Purple Wire 0 mA — 2 mA Absolute Voltage Range on 0-10V (+) Purple Wire -2.0 V — +15 V Typical Dimming Circuit Dim(+) Purple LED25W-XX-CXXXX-D IP710 Wall Dimmer Dim(-) Gray (Dimmer must be current-sink type control) Notes: 1. 0-10V dimmable version comes with an extra two wires +Purple/-Gray on the output side. 2. Compatible with most 0-10V dimmers. Recommended dimmer is Leviton IP710 or equivalent 3. 0-10V dimmable version is not intended to dim below about 5% @ 0V or 10% @ 1.0V 4. 0-10V dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted. Hubbell Lighting Components • 1225 Bowes Rd • Elgin, IL 60123 T 847-515-3057 • F 847-515-3047 • hubbelllightingcomponents.com Pg 3 of 2 Copyright © 2018 Hubbell Lighting Components, a division of Hubbell Lighting, Inc. All rights reserved.