Rev 8-28-2017 LED-100W Series Switch Mode LED Drivers TYPE Electrical Specifications TL Input Voltage Range: 100-277 Vac Nom. (90-305 V Min/Max) E332160 Can endure 320Vac for 48 Hrs, 350Vac for Input Over-Voltage: 2 Hrs Frequency: 50/60 Hz Nom. (47-63 Hz Min/Max) Power Factor: >0.90 @ full load, 100V through 277V Inrush Current: <30.0 Amps max @ 230 Vac, cold start 25ºC Input Current: 1.30 Amps max Maximum Power: 100W Current Accuracy: ± 1% Over input line variation Load Regulation: ± 3% THD: ≤ 20% @ full load Hold-up Time: Half Cycle Leakage Current: 400 µA Typical Protections Over-voltage Output Over-current Output Short Circuit Auto Recovery Constant Current Models Environmental Specifications Output Current Output Voltage Max. Output Typical Max Case Life Temp: 71˚C Model (mA ±3%) Range (Vdc) Power (W) Efficiency (5 year warranty) LED100W-286-C0350-XX 350 95-286 100 92% Maximum Case Temp (UL): 90ºC LED100W-222-C0450-XX 450 74-222 100 92% Minimum Starting Temp: -30ºC LED100W-143-C0700-XX 700 47-143 100 91% UL Type TL Rating: Non-Class 2: 90/73°C LED100W-095-C1050-XX 1050 31-95 100 91% Storage Temperature: -40ºC to +85ºC LED100W-071-C1400-XX 1400 23-71 100 91% LED100W-057-C1750-XX 1750 19-57 100 90% Humidity: 5% to 95% LED100W-048-C2100-XX 2100 16-48 100 90% Cooling: Convection LED100W-041-C2450-XX 2450 13-41 100 90% Vibration Frequency: 5 to 55 Hz/2g, 30 minutes LED100W-036-C2800-XX 2800 12-36 100 90% Sound Rating: Class A LED100W-032-C3150-XX 3150 10-32 100 90% 418,000 Hours at full load and 40ºC ambi- LED100W-028-C3570-XX 3570 9-28 100 89% MTBF: ent conditions per MIL-217F Notice 2 LED100W-024-C4200-XX 4200 8-24 100 89% EMC: FCC 47CFR Part 15 Class B compliant LED100W-020-C5000-XX 5000 7-20 100 88% LED100W-018-C5550-XX 5550 6-18 100 88% • Total Power: 100 Watts -XX indicates dimming options are available. See options at left. Blank = fixed current output • Input Voltage: 100-277 Vac Nom. • UL Dry & Damp Location Rated Constant Voltage Models • IP66 Output Voltage Output Current Max. Output Typical • High Power Factor Model (Vdc ±5%) Range (mA) Power (W) Efficiency • UL Type HL Rated for Hazardous Locations LED100W-018 18 1388-5550 100 88% LED100W-020 20 1250-5000 100 88% • UL Sign Components Manual (S.A.M. Models) LED100W-024 • 24 1050-4200 100 89% • Constant Current & Constant Voltage with Isolation LED100W-028 28 893-3570 100 89% • Black Magic Thermal Advantage™ Plastic Housing LED100W-032 32 788-3150 100 90% LED100W-036 36 700-2800 100 90% LED100W-041 41 613-2450 100 90% LED100W-048 48 525-2100 100 90% Dimming Option: LED100W-057 57 438-1750 100 90% 0-10V & Resistance dimmable models include an extra two wires +Purple/-Gray on the output side. “-D” Compatible with most quality LED100W-071 71 350-1400 100 91% 0-10V wall dimmers. See page 3 for additional specifications. LED100W-095 95 263-1050 100 91% LED100W-143 143 175-700 100 91% LED100W-222 222 113-450 100 92% Note: LED100W-286 286 88-350 100 92% LED drivers are designed and intended to operate LED loads only. Non-LED • loading may be outside the specified design limits of our LED drivers, and Indicates S.A.M. therefore cannot be covered by any warranty. If you desire to use our LED drivers to operate non-LED loads please contact us to discuss compatibility. © 2017 Thomas Research Products. Specifications subject to change without notice. Pg 1 of 3 Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com

LED-100W Series Switch Mode LED Drivers Dimensions IN [mm] 6.81 [173.0] 0.24 [6] []1 71.3 []0.16 4 8 2. ]7 2 [6 0 1. WIRE SPECS: Input Leads: 18 AWG, rated 600 V, 105C, min. ]8 Output Leads: 18 AWG, rated 300 V, 105C, min. 6.42 [163.0] [31 7. DAlilm wmireinsg a Lree astdrasn: d2e2d A wWitGh ,s roaldteedr 3d0ip0p eVd, 1e0n5dCs.. 0. 7.25 [184.0] 5.91 Min [150 Min] 0.90 [22.8] 5.91 Min [150 Min] Dimming 0.39±0.04 [10±1] Purple (+) INPUT Gray (-) Black (L) White (N) Green/Yellow (GND)0.39±0.04 [10±1] ]5 6. 4 [3 2.24±0.12 [57.0±3] 1.8 2.24±0.12 [57.0±3] OUTPUT Red (+) Blue (-) 3.21 [81.5] Tc = 90°C max Power Characteristics Power Factor / Load THD / Load 1.00 50% 0.90 45% 0.80 40% 0.70 35% 0.60 PF0.50 HD30% T25% 0.40 120Vac 120Vac 0.30 277Vac 20% 277Vac 0.20 15% 0.10 10% 0.00 0% 50% 60% 70% 80% 90% 100% 50% 60% 70% 80% 90% 100% Load Load Lifetime/Case Temperature Safety Cert. Standard (Full Load @ 120Vac) UL/CUL UL8750 & CAN/CSA-22.2 350 CE EN 61347 300 EMC Standard Notes s) Hr250 FCC, 47CFR Part 15 Class B k me(200 EN 61000-3-2 EN 61000-3-3 Class C Lifeti150 EN 61000-4-5 2 kV/4 kV 8/20µsec 100 50 0 45 50 55 60 65 70 75 80 85 90 Case Hotspot Temperature (°C) UL Conditions of Acceptability See website for additional information Note: The area under the life-temperature curve represents where the driver has highly reliable operation within specification. Driver performance may drift out of published specifications as the hours of operation exceed the curve at a given temperature. Higher operating temperatures increase the chances of a failure to function. Other electrical, mechanical and environmental factors affect driver lifetime but are not represented in this calculation. © 2017 Thomas Research Products. Specifications subject to change without notice. Pg 2 of 3 Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com

LED-100W Series Switch Mode LED Drivers “-D” Option: 0-10VDC and Resistance Dimming Parameters Minimum Typical Maximum Source Current out of 0-10V Purple Wire 0 mA — 2 mA Absolute Voltage Range on 0-10V (+) Purple Wire -2.0 V — +15 V Output Current / 0-10VDC Dimming Input 100 Typical Dimming Circuit 90 80 Dim (+) Purple % 70 LED100W-XX-CXXXX-D IP710 Wall Dimmer ent 60 Dim (-) Gray rr50 u C40 (Dimmer must be current-sink type control) ut 30 p ut20 O 10 0 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming Input (Vdc) Notes: 1. 0-10V dimmable version comes with an extra two wires +Purple/-Gray on the output side. 2. Compatible with most 0-10V Wall Slide dimmers and direct 0-10V analog signal. Recommended dimmer is Leviton IP710 or equivalent 3. 0-10V dimmable version is not intended to dim below about 5% @ 0V or 10% @ 1.0V 4. 0-10V dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted. © 2017 Thomas Research Products. Specifications subject to change without notice. Pg 3 of 3 Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com