Transient Voltage Suppression Diodes Axial Leaded – 1500W > LCE series LCE Series RoHS Pb e3 Description Uni-directional The LCE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features • 1500W peak pulse power IEC 61000-4-4 capability at 10/1000μs • Low incremental surge waveform, repetition rate resistance (duty cycles):0.01% • High temperature • Glass passivated chip to reflow soldering Agency Approvals junction in DO-201 guaranteed: 260°C/40sec Package / 0.375”,(9.5mm) lead AGENCY AGENCY FILE NUMBER • Fast response time: length, 5 lbs., (2.3kg) typically less than 1.0ps tension E230531 from 0 Volts to BV min • Plastic package is • Excellent clamping flammability rated capability V-0 per Underwriters • Typical failure mode is Laboratories Maximum Ratings and Thermal Characteristics short from over-specified • Matte tin lead–free plated (T =25OC unless otherwise noted) voltage or current • Ideal for data line A • Whisker test is conducted applications Parameter Symbol Value Unit based on JEDEC • Halogen free and RoHS JESD201A per its table 4a Peak Pulse Power Dissipation by compliant and 4c 10/1000μs Test Waveform (Fig.1) PPPM 1500 W • Pb-free E3 means 2nd (Note 1) • IEC-61000-4-2 ESD level interconnect is Steady State Power Dissipation on 30kV(Air), 30kV (Contact) Pb-free and the terminal P 6.5 W Infinite Heat Sink at TL=75ºC (Fig. 5) D • ESD protection of data finish material is tin(Sn) Operating Junction and Storage lines in accordance with (IPC/JEDEC J-STD- T, T -65 to 175 °C Temperature Range J STG IEC 61000-4-2 609A.01) • EFT protection of data Note: 1. Non-repetitive current pulse , per Fig. 3 and derated above T (initial) = 25OC per Fig. 2. lines in accordance with J Additional Infomarion Applications TVS devices are ideal for the protection of I/O interfaces, V bus and other vulnerable circuits used in telecom, CC computer, industrial and consumer electronic applications. Datasheet Resources Samples © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15

Transient Voltage Suppression Diodes Axial Leaded – 1500W > LCE series Electrical Characteristics (T=25°C unless otherwise noted) A NuPmarbt e r SRVteoavnltedarg soeeff BVoreltaa(kVgde)o VwBnR CuTerIrse tn t MLReaexavikemargsueem MCVlaaoaxmltti maIpgiun e mg PMeC(aaFuxkirgi rmPe.3unu)ltsm e CMaJpuaanxcicmittiaounnmc e BWInloovcerkkriisnnegg CBLIunelrovarceekknraisgnte ega t BInlPovecekariksn eg AApgpernocvya l VR (V) MIN MAX (mTA) IR( µ@A V)R VC (Vpp) IPPM (A) @ 0(p VFo)lts VVoWlItBa (gVe) IIB( @m AVW)IB VVoPlIBta (gVe) LCE6.5A 6.5 7.22 7.98 10 1000 11.2 100.0 100 75 1.0 100 X LCE7.0A 7.0 7.78 8.60 10 500 12.0 100.0 100 75 1.0 100 X LCE7.5A 7.5 8.33 9.21 10 250 12.9 100.0 100 75 1.0 100 X LCE8.0A 8.0 8.89 9.83 1 100 13.6 100.0 100 75 1.0 100 X LCE8.5A 8.5 9.44 10.40 1 50 14.4 100.0 100 75 1.0 100 X LCE9.0A 9.0 10.00 11.10 1 10 15.4 97.0 100 75 1.0 100 X LCE10A 10.0 11.10 12.30 1 5 17.0 88.0 100 75 1.0 100 X LCE11A 11.0 12.20 13.50 1 1 18.2 82.0 100 75 1.0 100 X LCE12A 12.0 13.30 14.70 1 1 19.9 75.0 100 75 1.0 100 X LCE13A 13.0 14.40 15.90 1 1 21.5 70.0 100 75 1.0 100 X LCE14A 14.0 15.60 17.20 1 1 23.2 65.0 100 75 1.0 100 X LCE15A 15.0 16.70 18.50 1 1 24.4 61.0 100 75 1.0 100 X LCE16A 16.0 17.80 19.70 1 1 26.0 57.0 100 75 1.0 100 X LCE17A 17.0 18.90 20.90 1 1 27.6 54.0 100 75 1.0 100 X LCE18A 18.0 20.00 22.10 1 1 29.2 51.0 100 75 1.0 100 X LCE20A 20.0 22.20 24.50 1 1 32.4 46.0 100 75 1.0 100 X LCE22A 22.0 24.40 26.90 1 1 35.5 42.0 100 75 1.0 100 X LCE24A 24.0 26.70 29.50 1 1 38.9 39.0 100 75 1.0 100 X LCE26A 26.0 28.90 31.90 1 1 42.1 36.0 100 75 1.0 100 X LCE28A 28.0 31.10 34.40 1 1 45.5 33.0 100 75 1.0 100 X LCE30A 30.0 33.30 36.80 1 1 48.4 31.0 100 75 1.0 100 X LCE33A 33.0 36.70 40.60 1 1 53.3 28.1 100 75 1.0 100 X LCE36A 36.0 40.00 44.20 1 1 58.1 25.8 100 75 1.0 100 X LCE40A 40.0 44.40 49.10 1 1 64.5 23.3 100 75 1.0 100 X LCE43A 43.0 47.80 52.80 1 1 69.4 21.6 100 75 1.0 100 X LCE45A 45.0 50.00 55.30 1 1 72.7 20.6 100 75 1.0 100 X LCE48A 48.0 53.30 58.90 1 1 77.4 19.4 100 75 1.0 100 X LCE51A 51.0 56.70 62.70 1 1 82.4 18.2 100 75 1.0 100 X LCE54A 54.0 60.00 66.30 1 1 87.1 17.2 100 100 1.0 125 X LCE58A 58.0 64.40 71.20 1 1 93.6 16.0 100 100 1.0 125 X LCE60A 60.0 66.70 73.70 1 1 96.8 15.5 100 100 1.0 125 X LCE64A 64.0 71.10 78.60 1 1 103.0 14.6 100 100 1.0 125 X LCE70A 70.0 77.80 86.00 1 1 113.0 13.3 100 125 1.0 150 X LCE75A 75.0 83.30 92.10 1 1 121.0 12.4 100 125 1.0 150 X LCE85A 85.0 94.40 104.00 1 1 129.0 11.6 100 125 1.0 150 X LCE90A 90.0 100.00 111.00 1 1 146.0 10.3 100 125 1.0 150 X Note: For parts without A, the V is ±10% and V is 5% higher than with A parts. BR C © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15

Transient Voltage Suppression Diodes Axial Leaded – 1500W > LCE series Ratings and Characteristic Curves (T=25°C unless otherwise noted) A Figure 1 - Peak Pulse Power Rating Figure 2 - Peak Pulse Power Derating Curve 1000 100 P - Peak Pulse Power (kW)PPM 110100 ak Pulse Power (P) or Current (I)PPPPDerating in Percentage % 24680000 e P 0.1 0 0.000001 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175 td-Pluse Width (Sec.) TJ - Initial Junction Temperature (ºC) Figure 3 - Pulse Waveform Figure 4 - AC Line Protection Application 150 % IRSM tr=1P0eµaske cValue TPacusuJ r=ltrsh2eee5n W °tpC diodeitnchta( wytdsh) teiosr e5d 0teh%fien opefde IaPkP M nt, 100 IPPM e urr Pulse C HIPaPlMf Va(lI Pu P2eM ) Peak 50 1a0s /d10e0fi0nµesde bc.y W Ra.Ev.eAform Low Capacitance - M TVC IPP td Application Note: Device must be used 0 0 1.0 2.0 3.0 4.0 with two units in parrellel, opposite in polarity as shown on circuit for AC signal lin t-Time (ms) protection. © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15

Transient Voltage Suppression Diodes Axial Leaded – 1500W > LCE series Soldering Parameters Lead–free Reflow Condition assembly TP tp - Temperature Min (T ) 150°C Ramp-up Critical Zone Pre Heat - Temperature Max (Tss(m(mina)x)) 200°C T) TL tL TL to TP Atov epreaagke ram- pT iumpe r a(mtei n(L tioq umidauxs) T(tes)mp (TA) 630°C –/ s1e8c0o nsde cmsax (Temperature TTss((mmainx)) Prethseat Ramp-down T to T - Ramp-up Rate 3°C/second max S(max) A 25˚C - Temperature (T ) (Liquidus) 217°C t 25˚C to Peak Reflow A Time (t) - Time (min to max) (t) 60 – 150 seconds s Peak Temperature (T) 260+0/-5 °C P Time within 5°C of actual peak 20 – 40 seconds Flow/Wave Soldering (Solder Dipping) Temperature (t) p Ramp-down Rate 6°C/second max Peak Temperature : 265OC Time 25°C to peak Temperature (T) 8 minutes Max. Dipping Time : 10 seconds P Do not exceed 260°C Soldering : 1 time Physical Specifications Environmental Specifications Weight 0.045oz., 1.2g High Temp. Storage JESD22-A103 JEDEC DO-201 molded plastic body Case HTRB JESD22-A108 over passivated junction. Color band denotes the cathode except Polarity Temperature Cycling JESD22-A104 Bipolar. Matte Tin axial leads, solderable per H3TRB JESD22-A101 Terminal JESD22-B102. RSH JESD22-B106 Dimensions Inches Millimeters Dimensions D Min Max Min Max C A 1.000 - 25.40 - B 0.285 0.375 7.20 9.50 C 0.038 0.042 0.96 1.07 A B A D 0.190 0.210 4.80 5.30 DO-201 © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15

Transient Voltage Suppression Diodes Axial Leaded – 1500W > LCE series Part Numbering System Part Marking System LCExxxAX OPTION CODE: BLANK Reel Tape Cathode Band F -B Bulk Packaging YYWW Littelfuse Logo TYPE CODE: Trace Code Marking A Uni-Directional (5% VBR Voltage Tolerance) YY:Year Code WW: Week Code VR VOLTAGE CODE LCEXXX (Refer to the Electrical Characteristics table) Product Type SERIES CODE Packaging Component Packaging Part Number Quantity Packaging Specification Package Option LCExxxXX DO-201 1200 Tape & Reel EIA STD RS-296 LCExxxXX-B DO-201 500 BULK Littelfuse Spec. Schematic Transient Voltage Suppressor Diode Tape and Reel Specification (625.5.06) Oe0i.ft0fh2 Ce8re( 0ns.it7de)er 2.0(5633.+00+.20.709//--10..00)39 0.047 0.236 (1.2) (6.0) 0.394+/-0.020 (10.0+/-0.5) Dimensions are in 13.0 inches/mm (330.2) 3.0 (76.2) 0.68 (17.27) 2.75 (69.85) Direction of Feed Recess Depth Max. 0.75 (19.05) © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: L ittelfuse: LCE11 LCE22 LCE24 LCE26A LCE6.5 LCE10 LCE15A LCE26 LCE7.5A LCE14A LCE6.5A-B LCE48A LCE7.0 LCE8.0A LCE11A LCE12 LCE8.0 LCE16A LCE8.5 LCE18A LCE13 LCE7.0A LCE9.0 LCE16 LCE10A LCE7.5 LCE28 LCE13A LCE22A LCE15 LCE28A LCE9.0A LCE20A LCE8.5A LCE17 LCE12A LCE14 LCE20 LCE6.5A LCE18 LCE24A LCE17A LCE58 LCE60A LCE75A-C LCE70 LCE45 LCE48 LCE51A LCE36 LCE54 LCE58A LCE30A LCE36A LCE40A LCE33 LCE43 LCE75A LCE90 LCE90A LCE45A LCE30 LCE33A LCE64 LCE70A LCE75 LCE51 LCE60 LCE64A LCE54A LCE40 LCE43A LCE80 LCE80A LCE48A-B LCE85A