LCB710 Single-Pole, Normally Closed OptoMOS® Relay I C D NTEGRATED IRCUITS IVISION Parameter Rating Units Description Load Voltage 60 V P LCB710 is a single-pole normally closed Load Current 1 Arms / ADC (1-Form-B) solid state relay that uses optically On-Resistance (max) 0.6  coupled technology to provide an enhanced 3750V rms LED Current to Operate 2 mA isolation barrier between the input and the output of the relay. The efficient MOSFET switches use IXYS Integrated Circuits Division's patented OptoMOS Features architecture. The optically coupled output is controlled (cid:129) 1A Load Current by a highly efficient GaAlAs infrared LED. (cid:129) 0.6 Max On-Resistance (cid:129) 2mA Control Current Approvals (cid:129) 3750V Input/Output Isolation rms (cid:129) Low Drive Power Requirements (TTL/CMOS (cid:129) UL Recognized Component: File E76270 Compatible) (cid:129) CSA Certified Component: Certificate 1175739 (cid:129) No Moving Parts (cid:129) EN/IEC 60950-1 Certified Component: (cid:129) High Reliability TUV Certificate B 09 07 49410 004 (cid:129) Arc-Free With No Snubbing Circuits (cid:129) No EMI/RFI Generation Ordering Information (cid:129) Machine Insertable, Wave Solderable (cid:129) Small 6-Pin Package Part # Description (cid:129) Tape & Reel, Surface Mount Version Available LCB710 6-Lead DIP (50/Tube) LCB710S 6-Lead Surface Mount (50/Tube) LCB710STR 6-Lead Surface Mount (1000/Reel) Applications (cid:129) Sensor Circuitry Pin Configuration (cid:129) Instrumentation (cid:129) Multiplexers AC/DC Configuration (cid:129) Data Acquisition 1 6 (cid:129) Electronic Switching + Control Load (cid:129) I/O Subsystems 2 5 – Control Do Not Use (cid:129) Meters (gas, oil, electric and water) 3 4 Do Not Use Load (cid:129) Medical Equipment-Patient/Equipment Isolation (cid:129) Security (cid:129) Aerospace DC Only Configuration (cid:129) Industrial Controls 1 6 + Control + Load 2 5 – Control – Load 3 4 Do Not Use Switching Characteristics of Normally Closed Devices Form-B I F I LOAD 90% 10% t t off on e Pb 3 DS-LCB710-R02 www.ixysic.com 1

I C D LCB710 NTEGRATED IRCUITS IVISION Absolute Maximum Ratings @ 25ºC Parameter Ratings Units Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to Blocking Voltage 60 V P the device. Functional operation of the device at conditions Reverse Input Voltage 5 V beyond those indicated in the operational sections of this Input Control Current 50 mA data sheet is not implied. Peak (10ms) 1 A Input Power Dissipation 1 100 mW Total Power Dissipation 2 800 mW Isolation Voltage, Input to Output 3750 V rms ESD Rating, Human Body Model 8 kV Operational Temperature -40 to +85 °C Storage Temperature -40 to +125 °C 1 Derate linearly 1.33 mW / ºC 2 Derate linearly 6.67 mW / ºC Electrical Characteristics @ 25ºC Parameter Conditions Symbol Min Typ Max Units Output Characteristics Load Current AC/DC Configuration, Continuous - - 1 A / A I =0mA I rms DC DC Configuration, Continuous F L - - 2 A DC Peak I =0mA , t < 10ms I - - ±5 A F LPK P On-Resistance 1 AC/DC Configuration I =0mA, I=1A - 0.39 0.6 F L R  DC Configuration I =0mA, I=2A ON - 0.1 0.2 F L Switching Speeds Turn-On t - 0.63 3 I =5mA, V=10V on ms Turn-Off F L t - 1.5 3 off Off-State Leakage Current I =2mA, V=60V I - - 1 A F L LEAK Output Capacitance I =2mA, V=50V, f=1MHz C - 125 - pF F L OUT Input Characteristics Input Control Current to Activate I=1A I - 0.22 2 mA L F Input Control Current to Deactivate - I 0.1 0.21 - mA F Input Voltage Drop I =5mA V 0.9 1.2 1.4 V F F Reverse Input Current V =5V I - - 10 A R R Common Characteristics Capacitance, Input to Output - C - 3 - pF I/O 1 Measurement taken within 1 second of on-time. 2 www.ixysic.com R02

I C D LCB710 NTEGRATED IRCUITS IVISION PERFORMANCE DATA* (@25ºC Unless Otherwise Noted) Typical LED Forward Voltage Drop Typical Turn-On Time Typical Turn-Off Time (N=50) (N=50, I=5mA) (N=50, I=5mA) F F 30 25 20 25 20 N) N) N) 15 unt ( 20 unt ( 15 unt ( Co 15 Co Co 10 Device 10 Device 10 Device 5 5 5 0 0 0 1.220 1.225 1.230 1.235 1.240 1.245 1.250 0.54 0.57 0.60 0.63 0.66 0.69 0.72 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 LED Forward Voltage (V) Turn-On Time (ms) Turn-Off Time (ms) Typical I for Switch Operation Typical On-Resistance Distribution Typical Blocking Voltage Distribution F (N=50, I=1A) (I=1A) (N=50, I=2mA) L L F 25 20 25 20 20 N) N) 15 N) unt ( 15 unt ( unt ( 15 Co Co 10 Co Device 150 Device 5 Device 150 0 0 0 0.20 0.21 0.22 0.23 0.24 0.25 0.26 0.381 0.384 0.387 0.390 0.393 0.396 0.399 69 71 73 75 77 79 81 LED Current (mA) On -Resistance ((cid:58)) Blocking Voltage (V) P Typical Turn-On Time Typical Turn-Off Time LED Forward Voltage vs. LED Forward Current vs. LED Forward Current vs. Temperature (I=100mA) (I=100mA) 1.6 0.640 L 8 L V)1.5 0.638 7 Voltage (1.4 me (ms)000...666333246 me (ms) 56 LED Forward 111...123 IIIFFFII===F==52152000mmmmmAAAAA Turn-On Ti00000.....666662222324680 Turn-Off Ti 1234 1.0 F 0.620 0 -40 -20 0 20 40 60 80 100 0 10 20 30 40 50 0 10 20 30 40 50 Temperature (ºC) LED Forward Current (mA) LED Forward Current (mA) Typical I for Switch Operation Typical Turn-On Time Typical Turn-Off Time F vs. Temperature vs. Temperature vs. Temperature (I=100mA) (I=5mA, I=100mA) (I=5mA, I=100mA) 0.32 L 0.9 F L 2.6 F L 2.4 LED Current (mA)0000....12226048 Turn-On Time (ms) 0000....5678 Turn-Off Time (ms) 1122....6802 1.4 0.12 0.4 1.2 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 Temperature (ºC) Temperature (ºC) Temperature (ºC) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please contact our application department. R02 www.ixysic.com 3

I C D LCB710 NTEGRATED IRCUITS IVISION PERFORMANCE DATA* (@25ºC Unless Otherwise Noted) Typical On-Resistance vs. Temperature Typical Load Current vs. Load Voltage Maximum Load Current vs. Temperature AC/DC Configuration AC/DC Configuration AC/DC Configuration (I=0mA, I=500mA) (I=0mA) (I=0mA) 0.48 F L 1.0 F 1.1 F 0.44 1.0 On-Resistance ()(cid:58)000...334260 Load Current (A)-000...505 Load Current (A) 0000....6789 0.28 -1.0 0.5 -40 -20 0 20 40 60 80 100 -0.4 -0.3 -0.2 -0.1 0.0 0.1 0.2 0.3 0.4 -40 -20 0 20 40 60 80 100 Temperature (ºC) Load Voltage (V) Temperature (ºC) Typical On-Resistance vs. Temperature Load Current vs. Load Voltage Maximum Load Current vs. Temperature DC-Only Configuration DC-Only Configuration DC-Only Configuration (I=0mA, I=1A) (I=0mA) (I=0mA) 0.12 F L 2.0 F 2.2 F 0.11 2.0 On Resistance ()(cid:58)000...001890 Load Current (A) 011...505 Load Current (A) 1111....2468 0.07 0.0 1.0 -40 -20 0 20 40 60 80 100 0.00 0.05 0.10 0.15 0.20 0.25 -40 -20 0 20 40 60 80 100 Temperature (ºC) Load Voltage (V) Temperature (ºC) Typical Blocking Voltage Typical Leakage Current Output Capacitance vs. Temperature vs. Temperature vs. Load Voltage (I=2mA) (I=2mA, V=60V) (I=2mA, f=1MHz) 81 F 0.10 F L 450 F 80 F)400 Blocking Voltage (V)P777777456789 Leakage Current (A)(cid:80)0000....00002468 Output Capacitence (p122335050500000 73 0.00 100 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 0.1 1 10 100 Temperature (ºC) Temperature (ºC) Load Voltage (V) Energy Rating Curve 5.5 5.0 4.5 A) nt (4.0 e3.5 Curr3.0 ad 2.5 o L2.0 1.5 1.0 10(cid:80)s 100(cid:80)s 1ms 10ms100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please contact our application department. 4 www.ixysic.com R02

I C D LCB710 NTEGRATED IRCUITS IVISION Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating LCB710 / LCB710S MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time LCB710 / LCB710S 250ºC for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. e Pb 3 R02 www.ixysic.com 5

I C D LCB710 NTEGRATED IRCUITS IVISION Mechanical Dimensions LCB710 8.382 ± 0.381 PCB Hole Pattern 7.239 TYP (0.330 ± 0.015) 2.54 ± 0.127 (0.285 TYP) (0.100 ± 0.005) 6 - 0.800 DIA. 2.540 ± 0.127 (6 - 0.031 DIA.) 9.144 ± 0.508 (0.100 ± 0.005) 6.350 ± 0.127 (0.360 ± 0.020) (0.250 ± 0.005) 7.620 ± 0.127 (0.300 ± 0.005) 7.620 ± 0.254 Pin 1 (0.300 ± 0.010) 1.651 ± 0.254 0.254 ± 0.0127 (0.065 ± 0.010) (0.010 ± 0.0005) 6.350 ± 0.127 5.080 ± 0.127 (0.250 ± 0.005) (0.200 ± 0.005) 3.302 ± 0.051 4.064 TYP (0.130 ± 0.002) (0.160 TYP) Dimensions 0.457 ± 0.076 mm (0.018 ± 0.003) (inches) LCB710S 0.635 ± 0.127 PCB Land Pattern 8.382 ± 0.381 (0.025 ± 0.005) (0.330 ± 0.015) 2.54 ± 0.127 (0.100 ± 0.005) 2.54 (0.10) 9.524 ± 0.508 6.350 ± 0.127 (0.375 ± 0.020) (0.250 ± 0.005) 8.90 1.65 (0.3503) 7.620 ± 0.254 0.254 ± 0.0127 (0.0649) Pin 1 (00..405178 ±± 00..007063) (0.300 ± 0.010) (0.010 ± 0.0005) 1.651 ± 0.254 (0.065 ± 0.010) 0.65 3.302 ± 0.051 (0.130 ± 0.002) (0.0255) 4.445 ± 0.254 (0.175 ± 0.010) Dimensions 1.651 ± 0.254 mm (0.065 ± 0.010) (inches) 6 www.ixysic.com R02

I C D LCB710 NTEGRATED IRCUITS IVISION LCB710STR Tape & Reel 330.2 Dia (13.00 Dia) Top Cover W=16.00 Tape Thickness (0.63) 0.102 Max B = 10.10 (0.004 Max) 0 (0.398) P = 12.00 A = 10.10 K = 4.90 0 0 (0.472) (0.398) (0.19) K = 3.80 Dimensions 1 (0.15) User Direction of Feed mm Embossed (inches) Carrier NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 Embossment 2. The tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-LCB710-R02 ©Copyright 2012, IXYS Integrated Circuits Division 7 OptoMOS® is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/22/2012

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: I XYS: LCB710 LCB710S LCB710STR