ALUMINUM ELECTROLYTIC CAPACITORS LAR Snap-in Terminal Type, 105°C Permissible Overvoltage Withstanding 2000 hours application of rated ripple current at 105°C. Reduction of short incidence when overvoltage (rated voltage x 1.5) is applied to a capacitor. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). LAR Permissible LGU Overvoltage Specifications Item Performance Characteristics Category Temperature Range –40 to +105˚C (200 250V), –25 to +105˚C (400 450V) Rated Voltage Range 200 to 450V Rated Capacitance Range 82 to 2200µF Capacitance Tolerance ±20% at 120Hz, 20˚C Leakage Current I 3 CV (µA) (After 5 minutes' application of rated voltage [C:Rated Capacitance(µF), V:Voltage(V)] Rated voltage (V) 200 to 400 450 Measurement frequency : 120Hz at 20˚C Tangent of loss angle (tan δ) tan δ (MAX.) 0.15 0.20 Measurement frequeny : 120Hz Rated voltage(V) 200 • 250 400 • 450 Stability at Low Temperature Impedance ratio Z – 25°C / Z+20°C 3 8 ZT/Z20(MAX.) Z – 40°C / Z+20°C 12 ----- The specifications listed at right shall be met when the Capacitance change Within ±20% of the initial capacitance value capacitors are restored to 20°C after D.C. bias plus Endurance tan δ 200% or less than the initial specified value rated ripple current is applied for 2000 hours at 105°C, the peak voltage shall not exceed the rated voltage. Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 105°C for 1000 Capacitance change Within ±15% of the initial capacitance value hours and then performing voltage treatment based Shelf Life tan δ 150% or less than the initial specified value on JIS C 5101-4 clause 4.1 at 20°C, Leakage current Less than or equal to the initial specified value they shall meet the requirements listed at right. When overvoltage (rated voltage x 1.5, limited current = 1A) is applied to a capacitor, the pressure relief vent will operate normally Safety Performance more than 60% of the time without short and flame. Marking Printed with white color letter on black sleeve. Drawing Type numbering system (Example : 400V 120µF) Polarity bar Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 D MAX. +1.5MAX. PSolelaervitey (bPa.Er.T.) LL1 AA2 RR3 224 GG5 116 227 118 MM9 EE10 1LL1 1ZZ2 1333 1004 Case length code D +1.5φφ L2 10 Configuration CaCCsφeaaD ssleeen ddgiitaaCh.. o cccdoooedddeee Pressure relief veLn±2t 4.00.5　4.0±0.5(10) Capacitance toCleorannfcigeu (±ra2t0io%n) φ22D25 CoAZde Pressure relief vent RatCedap caaciptaancciet atonlecrea n(c1e2 (02µ0F%)) 3202 BZ 100.1 0.80+-00...182+-00..12 0.8+0-0..0.821+-0.0.21 RatedRR Caattaeepdda vvcooitSSllattaaeenggrrciieeeee ss((( 441nn00T2aa00y0mmpVVFeee))) 32335505 CCAB 10±0.1 0.54.00.5 2.5 Type ± 2-2φ±0.1 4.0　 () 2.5 (PC boa2r-d2 hφo±l0e. 1dimensions) (T1e.5rm+-00.i.1n21a.5l +-d00.i.1m2ensions) (PC board hole dimensions) (Terminal dimensions) The other terminal is also available upon request. Please refer page 346 for schematic of dimensions. Frequency coefficient of rated ripple current Frequency(Hz) 50 60 120 300 1k 10k 50k or more 200,250V 0.81 0.85 1.00 1.17 1.32 1.45 1.50 coeff. 400,450V 0.77 0.82 1.00 1.16 1.30 1.41 1.43 Minimum order quantity : 50pcs. Dimension table in next page. 342

ALUMINUM ELECTROLYTIC CAPACITORS LAR Dimensions 200V (2D) 250V (2E) Cap. Size Rated Leakage Current Cap. Size Rated Leakage Current (µF) φD × L(mm) (mripAprmles) (mA) Code (µF) φD × L(mm) (mripAprmles) (mA) Code 390 22 × 25 1310 0.83 LAR2D391MELZ25 270 22 × 25 1100 0.77 LAR2E271MELZ25 22 × 30 1480 0.91 LAR2D471MELZ30 22 × 30 1200 0.86 LAR2E331MELZ30 470 330 25 × 25 1480 0.91 LAR2D471MELA25 25 × 25 1200 0.86 LAR2E331MELA25 560 22 × 35 1600 1.00 LAR2D561MELZ35 22 × 35 1300 0.93 LAR2E391MELZ35 390 22 × 40 1750 1.10 LAR2D681MELZ40 25 × 30 1300 0.93 LAR2E391MELA30 680 25 × 30 1750 1.10 LAR2D681MELA30 22 × 40 1400 1.02 LAR2E471MELZ40 30 × 25 1750 1.10 LAR2D681MELB25 470 25 × 35 1400 1.02 LAR2E471MELA35 22 × 45 2040 1.21 LAR2D821MELZ45 30 × 25 1400 1.02 LAR2E471MELB25 820 25 × 35 2040 1.21 LAR2D821MELA35 22 × 45 1500 1.12 LAR2E561MELZ45 22 × 50 2300 1.34 LAR2D102MELZ50 560 25 × 35 1500 1.12 LAR2E561MELA35 25 × 45 2300 1.34 LAR2D102MELA45 30 × 30 1500 1.12 LAR2E561MELB30 1000 30 × 30 2300 1.34 LAR2D102MELB30 22 × 50 1700 1.23 LAR2E681MELZ50 35 × 25 2300 1.34 LAR2D102MELC25 25 × 40 1700 1.23 LAR2E681MELA40 680 25 × 50 2650 1.46 LAR2D122MELA50 30 × 30 1700 1.23 LAR2E681MELB30 1200 30 × 35 2650 1.46 LAR2D122MELB35 35 × 25 1700 1.23 LAR2E681MELC25 35 × 30 2650 1.46 LAR2D122MELC30 25 × 45 2000 1.35 LAR2E821MELA45 30 × 40 2800 1.64 LAR2D152MELB40 820 30 × 35 2000 1.35 LAR2E821MELB35 1500 35 × 35 2800 1.64 LAR2D152MELC35 35 × 30 2000 1.35 LAR2E821MELC30 30 × 50 3080 1.80 LAR2D182MELB50 30 × 40 2200 1.50 LAR2E102MELB40 1800 1000 35 × 40 3080 1.80 LAR2D182MELC40 35 × 35 2200 1.50 LAR2E102MELC35 2200 35 × 45 3480 1.98 LAR2D222MELC45 30 × 45 2300 1.64 LAR2E122MELB45 1200 35 × 40 2300 1.64 LAR2E122MELC40 1500 35 × 45 2500 1.83 LAR2E152MELC45 1800 35 × 50 2700 2.01 LAR2E182MELC50 400V (2G) 450V (2W) Cap. Size Rated Leakage Current Cap. Size Rated Leakage Current (µF) φD × L(mm) (mripAprmles) (mA) Code (µF) φD × L(mm) (mripAprmles) (mA) Code 100 22 × 25 680 0.60 LAR2G101MELZ25 82 22 × 25 340 0.57 LAR2W820MELZ25 120 22 × 30 730 0.65 LAR2G121MELZ30 22 × 30 690 0.63 LAR2W101MELZ30 100 22 × 35 950 0.80 LAR2G181MELZ35 25 × 25 690 0.63 LAR2W101MELA25 180 25 × 30 950 0.80 LAR2G181MELA30 22 × 35 720 0.69 LAR2W121MELZ35 120 30 × 25 950 0.80 LAR2G181MELB25 25 × 30 720 0.69 LAR2W121MELA30 22 × 45 1100 0.88 LAR2G221MELZ45 22 × 40 790 0.77 LAR2W151MELZ40 220 25 × 35 1100 0.88 LAR2G221MELA35 150 25 × 30 790 0.77 LAR2W151MELA30 30 × 25 1100 0.88 LAR2G221MELB25 30 × 25 790 0.77 LAR2W151MELB25 22 × 50 1220 0.98 LAR2G271MELZ50 22 × 45 870 0.85 LAR2W181MELZ45 25 × 40 1220 0.98 LAR2G271MELA40 180 25 × 35 870 0.85 LAR2W181MELA35 270 30 × 30 1220 0.98 LAR2G271MELB30 30 × 30 870 0.85 LAR2W181MELB30 35 × 25 1220 0.98 LAR2G271MELC25 25 × 40 1050 0.94 LAR2W221MELA40 25 × 45 1440 1.08 LAR2G331MELA45 220 30 × 30 1050 0.94 LAR2W221MELB30 330 30 × 35 1440 1.08 LAR2G331MELB35 35 × 25 1050 0.94 LAR2W221MELC25 25 × 50 1550 1.18 LAR2G391MELA50 25 × 50 1230 1.04 LAR2W271MELA50 390 30 × 40 1550 1.18 LAR2G391MELB40 270 30 × 35 1230 1.04 LAR2W271MELB35 35 × 30 1550 1.18 LAR2G391MELC30 35 × 30 1230 1.04 LAR2W271MELC30 30 × 45 1680 1.30 LAR2G471MELB45 30 × 40 1380 1.15 LAR2W331MELB40 470 330 35 × 35 1680 1.30 LAR2G471MELC35 35 × 35 1380 1.15 LAR2W331MELC35 30 × 50 1900 1.41 LAR2G561MELB50 30 × 50 1610 1.25 LAR2W391MELB50 560 390 35 × 40 1900 1.41 LAR2G561MELC40 35 × 40 1610 1.25 LAR2W391MELC40 680 35 × 45 2120 1.56 LAR2G681MELC45 470 35 × 45 1780 1.37 LAR2W471MELC45 560 35 × 50 1990 1.50 LAR2W561MELC50 Rated ripple current (mArms) at 105°C 120Hz 343